Commit cb1d0a7a authored by Ben Dooks's avatar Ben Dooks Committed by Linus Torvalds

spi_s3c24xx: really assign busnum

The original "Pass the bus number we expect the S3C24XX SPI driver to
attach to via the platform data." [1] patch was mis-sent, and missed two
important parts of the diff, which was to actually set the bus_num field
and add the relevant field to the platform data.

The previous commit 50f426b5 promised to
add a bus_num field, but failed to include the two hunks that added this
field to include/asm-arm/arch-s3c2410/spi.h and then pass it to the spi
core when creating the new master field in drivers/spi/spi_s3c24xx.c.

[1] git commit 50f426b5Signed-off-by: default avatarBen Dooks <ben-linux@fluff.org>
Signed-off-by: default avatarDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent 9a7867e1
......@@ -270,6 +270,7 @@ static int __init s3c24xx_spi_probe(struct platform_device *pdev)
/* setup the master state. */
master->num_chipselect = hw->pdata->num_cs;
master->bus_num = pdata->bus_num;
/* setup the state for the bitbang driver */
......
......@@ -16,6 +16,7 @@
struct s3c2410_spi_info {
unsigned long pin_cs; /* simple gpio cs */
unsigned int num_cs; /* total chipselects */
int bus_num; /* bus number to use. */
void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol);
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment