Commit cb546b79 authored by Stephen Boyd's avatar Stephen Boyd Committed by Stephen Boyd

clk: qcom: Add HFPLL driver

On some devices (MSM8974 for example), the HFPLLs are
instantiated within the Krait processor subsystem as separate
register regions. Add a driver for these PLLs so that we can
provide HFPLL clocks for use by the system.

Cc: <devicetree@vger.kernel.org>
Signed-off-by: default avatarStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: default avatarSricharan R <sricharan@codeaurora.org>
Tested-by: default avatarCraig Tatlor <ctatlor97@gmail.com>
Signed-off-by: default avatarStephen Boyd <sboyd@kernel.org>
parent b3f2f106
......@@ -272,3 +272,11 @@ config SPMI_PMIC_CLKDIV
Technologies, Inc. SPMI PMIC. It configures the frequency of
clkdiv outputs of the PMIC. These clocks are typically wired
through alternate functions on GPIO pins.
config QCOM_HFPLL
tristate "High-Frequency PLL (HFPLL) Clock Controller"
depends on COMMON_CLK_QCOM
help
Support for the high-frequency PLLs present on Qualcomm devices.
Say Y if you want to support CPU frequency scaling on devices
such as MSM8974, APQ8084, etc.
......@@ -44,3 +44,4 @@ obj-$(CONFIG_SDM_DISPCC_845) += dispcc-sdm845.o
obj-$(CONFIG_SDM_GCC_845) += gcc-sdm845.o
obj-$(CONFIG_SDM_VIDEOCC_845) += videocc-sdm845.o
obj-$(CONFIG_SPMI_PMIC_CLKDIV) += clk-spmi-pmic-div.o
obj-$(CONFIG_QCOM_HFPLL) += hfpll.o
// SPDX-License-Identifier: GPL-2.0
// Copyright (c) 2018, The Linux Foundation. All rights reserved.
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/of.h>
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/regmap.h>
#include "clk-regmap.h"
#include "clk-hfpll.h"
static const struct hfpll_data hdata = {
.mode_reg = 0x00,
.l_reg = 0x04,
.m_reg = 0x08,
.n_reg = 0x0c,
.user_reg = 0x10,
.config_reg = 0x14,
.config_val = 0x430405d,
.status_reg = 0x1c,
.lock_bit = 16,
.user_val = 0x8,
.user_vco_mask = 0x100000,
.low_vco_max_rate = 1248000000,
.min_rate = 537600000UL,
.max_rate = 2900000000UL,
};
static const struct of_device_id qcom_hfpll_match_table[] = {
{ .compatible = "qcom,hfpll" },
{ }
};
MODULE_DEVICE_TABLE(of, qcom_hfpll_match_table);
static const struct regmap_config hfpll_regmap_config = {
.reg_bits = 32,
.reg_stride = 4,
.val_bits = 32,
.max_register = 0x30,
.fast_io = true,
};
static int qcom_hfpll_probe(struct platform_device *pdev)
{
struct resource *res;
struct device *dev = &pdev->dev;
void __iomem *base;
struct regmap *regmap;
struct clk_hfpll *h;
struct clk_init_data init = {
.parent_names = (const char *[]){ "xo" },
.num_parents = 1,
.ops = &clk_ops_hfpll,
};
h = devm_kzalloc(dev, sizeof(*h), GFP_KERNEL);
if (!h)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
base = devm_ioremap_resource(dev, res);
if (IS_ERR(base))
return PTR_ERR(base);
regmap = devm_regmap_init_mmio(&pdev->dev, base, &hfpll_regmap_config);
if (IS_ERR(regmap))
return PTR_ERR(regmap);
if (of_property_read_string_index(dev->of_node, "clock-output-names",
0, &init.name))
return -ENODEV;
h->d = &hdata;
h->clkr.hw.init = &init;
spin_lock_init(&h->lock);
return devm_clk_register_regmap(&pdev->dev, &h->clkr);
}
static struct platform_driver qcom_hfpll_driver = {
.probe = qcom_hfpll_probe,
.driver = {
.name = "qcom-hfpll",
.of_match_table = qcom_hfpll_match_table,
},
};
module_platform_driver(qcom_hfpll_driver);
MODULE_DESCRIPTION("QCOM HFPLL Clock Driver");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:qcom-hfpll");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment