wil6210: increase RX rings and RX buff array size

In Talyn-MB, the 11ad throughput is higher and performance drops
may occur in the current RX configuration due to unavailability
of Rx buffers.
Increase the RX descriptor ring, RX status ring and number of RX
buffers to stabilize the performance in high throughput.
Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

drivers/net/wireless/ath/wil6210/main.c

@@ -80,7 +80,7 @@ static const struct kernel_param_ops mtu_max_ops = {
 module_param_cb(mtu_max, &mtu_max_ops, &mtu_max, 0444);
 MODULE_PARM_DESC(mtu_max, " Max MTU value.");
 
-static uint rx_ring_order = WIL_RX_RING_SIZE_ORDER_DEFAULT;
+static uint rx_ring_order;
 static uint tx_ring_order = WIL_TX_RING_SIZE_ORDER_DEFAULT;
 static uint bcast_ring_order = WIL_BCAST_RING_SIZE_ORDER_DEFAULT;
 
@@ -1684,6 +1684,11 @@ int __wil_up(struct wil6210_priv *wil)
 		return rc;
 
 	/* Rx RING. After MAC and beacon */
+	if (rx_ring_order == 0)
+		rx_ring_order = wil->hw_version < HW_VER_TALYN_MB ?
+			WIL_RX_RING_SIZE_ORDER_DEFAULT :
+			WIL_RX_RING_SIZE_ORDER_TALYN_DEFAULT;
+
 	rc = wil->txrx_ops.rx_init(wil, 1 << rx_ring_order);
 	if (rc)
 		return rc;

drivers/net/wireless/ath/wil6210/txrx_edma.c

@@ -357,8 +357,8 @@ static int wil_init_rx_sring(struct wil6210_priv *wil,
 	struct wil_status_ring *sring = &wil->srings[ring_id];
 	int rc;
 
-	wil_dbg_misc(wil, "init RX sring: size=%u, ring_id=%u\n", sring->size,
-		     ring_id);
+	wil_dbg_misc(wil, "init RX sring: size=%u, ring_id=%u\n",
+		     status_ring_size, ring_id);
 
 	memset(&sring->rx_data, 0, sizeof(sring->rx_data));
 

drivers/net/wireless/ath/wil6210/txrx_edma.h

@@ -23,9 +23,9 @@
 #define WIL_SRING_SIZE_ORDER_MIN	(WIL_RING_SIZE_ORDER_MIN)
 #define WIL_SRING_SIZE_ORDER_MAX	(WIL_RING_SIZE_ORDER_MAX)
 /* RX sring order should be bigger than RX ring order */
-#define WIL_RX_SRING_SIZE_ORDER_DEFAULT	(11)
+#define WIL_RX_SRING_SIZE_ORDER_DEFAULT	(12)
 #define WIL_TX_SRING_SIZE_ORDER_DEFAULT	(12)
-#define WIL_RX_BUFF_ARR_SIZE_DEFAULT (1536)
+#define WIL_RX_BUFF_ARR_SIZE_DEFAULT (2600)
 
 #define WIL_DEFAULT_RX_STATUS_RING_ID 0
 #define WIL_RX_DESC_RING_ID 0

drivers/net/wireless/ath/wil6210/wil6210.h

@@ -81,6 +81,7 @@ static inline u32 WIL_GET_BITS(u32 x, int b0, int b1)
 
 #define WIL_TX_Q_LEN_DEFAULT		(4000)
 #define WIL_RX_RING_SIZE_ORDER_DEFAULT	(10)
+#define WIL_RX_RING_SIZE_ORDER_TALYN_DEFAULT	(11)
 #define WIL_TX_RING_SIZE_ORDER_DEFAULT	(12)
 #define WIL_BCAST_RING_SIZE_ORDER_DEFAULT	(7)
 #define WIL_BCAST_MCS0_LIMIT		(1024) /* limit for MCS0 frame size */