arm64: dts: qcom: Add missing vio-supply for AW2013

Add the missing vio-supply to all usages of the AW2013 LED controller
to ensure that the regulator needed for pull-up of the interrupt and
I2C lines is really turned on. While this seems to have worked fine so
far some of these regulators are not guaranteed to be always-on. For
example, pm8916_l6 is typically turned off together with the display
if there aren't any other devices (e.g. sensors) keeping it always-on.

Cc: stable@vger.kernel.org # 6.6
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20231204-qcom-aw2013-vio-v1-1-5d264bb5c0b2@gerhold.netSigned-off-by: Bjorn Andersson <andersson@kernel.org>

arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts

@@ -123,6 +123,7 @@ led-controller@45 {
 		#size-cells = <0>;
 
 		vcc-supply = <&pm8916_l17>;
+		vio-supply = <&pm8916_l6>;
 
 		led@0 {
 			reg = <0>;

arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts

@@ -142,6 +142,7 @@ led-controller@45 {
 		#size-cells = <0>;
 
 		vcc-supply = <&pm8916_l16>;
+		vio-supply = <&pm8916_l5>;
 
 		led@0 {
 			reg = <0>;

arch/arm64/boot/dts/qcom/msm8953-xiaomi-mido.dts

@@ -111,6 +111,7 @@ led-controller@45 {
 		reg = <0x45>;
 
 		vcc-supply = <&pm8953_l10>;
+		vio-supply = <&pm8953_l5>;
 
 		#address-cells = <1>;
 		#size-cells = <0>;

arch/arm64/boot/dts/qcom/msm8953-xiaomi-tissot.dts

@@ -104,6 +104,7 @@ led-controller@45 {
 		reg = <0x45>;
 
 		vcc-supply = <&pm8953_l10>;
+		vio-supply = <&pm8953_l5>;
 
 		#address-cells = <1>;
 		#size-cells = <0>;

arch/arm64/boot/dts/qcom/msm8953-xiaomi-vince.dts

@@ -113,6 +113,7 @@ led-controller@45 {
 		reg = <0x45>;
 
 		vcc-supply = <&pm8953_l10>;
+		vio-supply = <&pm8953_l5>;
 
 		#address-cells = <1>;
 		#size-cells = <0>;