docs: watchdog: convert docs to ReST and rename to *.rst

Convert those documents and prepare them to be part of the kernel
API book, as most of the stuff there are related to the
Kernel interfaces.

Still, in the future, it would make sense to split the docs,
as some of the stuff is clearly focused on sysadmin tasks.

The conversion is actually:
  - add blank lines and identation in order to identify paragraphs;
  - fix tables markups;
  - add some lists markups;
  - mark literal blocks;
  - adjust title markups.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

Documentation/admin-guide/kernel-parameters.txt

@@ -5160,7 +5160,7 @@
 			Default: 3 = cyan.
 
 	watchdog timers	[HW,WDT] For information on watchdog timers,
-			see Documentation/watchdog/watchdog-parameters.txt
+			see Documentation/watchdog/watchdog-parameters.rst
 			or other driver-specific files in the
 			Documentation/watchdog/ directory.
 

Documentation/kernel-per-CPU-kthreads.txt

@@ -348,7 +348,7 @@ To reduce its OS jitter, do at least one of the following:
 2.	Boot with "nosoftlockup=0", which will also prevent these kthreads
 	from being created.  Other related watchdog and softlockup boot
 	parameters may be found in Documentation/admin-guide/kernel-parameters.rst
-	and Documentation/watchdog/watchdog-parameters.txt.
+	and Documentation/watchdog/watchdog-parameters.rst.
 3.	Echo a zero to /proc/sys/kernel/watchdog to disable the
 	watchdog timer.
 4.	Echo a large number of /proc/sys/kernel/watchdog_thresh in

Documentation/watchdog/convert_drivers_to_kernel_api.txt → Documentation/watchdog/convert_drivers_to_kernel_api.rst

+=========================================================
 Converting old watchdog drivers to the watchdog framework
-by Wolfram Sang <w.sang@pengutronix.de>
 =========================================================
 
+by Wolfram Sang <w.sang@pengutronix.de>
+
 Before the watchdog framework came into the kernel, every driver had to
 implement the API on its own. Now, as the framework factored out the common
 components, those drivers can be lightened making it a user of the framework.
@@ -69,16 +71,16 @@ Here is a overview of the functions and probably needed actions:
   -ENOIOCTLCMD, the IOCTLs of the framework will be tried, too. Any other error
   is directly given to the user.
 
-Example conversion:
+Example conversion::
 
--static const struct file_operations s3c2410wdt_fops = {
--       .owner          = THIS_MODULE,
--       .llseek         = no_llseek,
--       .write          = s3c2410wdt_write,
--       .unlocked_ioctl = s3c2410wdt_ioctl,
--       .open           = s3c2410wdt_open,
--       .release        = s3c2410wdt_release,
--};
+  -static const struct file_operations s3c2410wdt_fops = {
+  -       .owner          = THIS_MODULE,
+  -       .llseek         = no_llseek,
+  -       .write          = s3c2410wdt_write,
+  -       .unlocked_ioctl = s3c2410wdt_ioctl,
+  -       .open           = s3c2410wdt_open,
+  -       .release        = s3c2410wdt_release,
+  -};
 
 Check the functions for device-specific stuff and keep it for later
 refactoring. The rest can go.
@@ -89,24 +91,24 @@ Remove the miscdevice
 
 Since the file_operations are gone now, you can also remove the 'struct
 miscdevice'. The framework will create it on watchdog_dev_register() called by
-watchdog_register_device().
+watchdog_register_device()::
 
--static struct miscdevice s3c2410wdt_miscdev = {
--       .minor          = WATCHDOG_MINOR,
--       .name           = "watchdog",
--       .fops           = &s3c2410wdt_fops,
--};
+  -static struct miscdevice s3c2410wdt_miscdev = {
+  -       .minor          = WATCHDOG_MINOR,
+  -       .name           = "watchdog",
+  -       .fops           = &s3c2410wdt_fops,
+  -};
 
 
 Remove obsolete includes and defines
 ------------------------------------
 
 Because of the simplifications, a few defines are probably unused now. Remove
-them. Includes can be removed, too. For example:
+them. Includes can be removed, too. For example::
 
-- #include <linux/fs.h>
-- #include <linux/miscdevice.h> (if MODULE_ALIAS_MISCDEV is not used)
-- #include <linux/uaccess.h> (if no custom IOCTLs are used)
+  - #include <linux/fs.h>
+  - #include <linux/miscdevice.h> (if MODULE_ALIAS_MISCDEV is not used)
+  - #include <linux/uaccess.h> (if no custom IOCTLs are used)
 
 
 Add the watchdog operations
@@ -121,30 +123,30 @@ change the function header. Other changes are most likely not needed, because
 here simply happens the direct hardware access. If you have device-specific
 code left from the above steps, it should be refactored into these callbacks.
 
-Here is a simple example:
+Here is a simple example::
 
-+static struct watchdog_ops s3c2410wdt_ops = {
-+       .owner = THIS_MODULE,
-+       .start = s3c2410wdt_start,
-+       .stop = s3c2410wdt_stop,
-+       .ping = s3c2410wdt_keepalive,
-+       .set_timeout = s3c2410wdt_set_heartbeat,
-+};
+  +static struct watchdog_ops s3c2410wdt_ops = {
+  +       .owner = THIS_MODULE,
+  +       .start = s3c2410wdt_start,
+  +       .stop = s3c2410wdt_stop,
+  +       .ping = s3c2410wdt_keepalive,
+  +       .set_timeout = s3c2410wdt_set_heartbeat,
+  +};
 
-A typical function-header change looks like:
+A typical function-header change looks like::
 
--static void s3c2410wdt_keepalive(void)
-+static int s3c2410wdt_keepalive(struct watchdog_device *wdd)
- {
-...
-+
-+       return 0;
- }
+  -static void s3c2410wdt_keepalive(void)
+  +static int s3c2410wdt_keepalive(struct watchdog_device *wdd)
+   {
+  ...
+  +
+  +       return 0;
+   }
 
-...
+  ...
 
--       s3c2410wdt_keepalive();
-+       s3c2410wdt_keepalive(&s3c2410_wdd);
+  -       s3c2410wdt_keepalive();
+  +       s3c2410wdt_keepalive(&s3c2410_wdd);
 
 
 Add the watchdog device
@@ -159,12 +161,12 @@ static variables. Those have to be converted to use the members in
 watchdog_device. Note that the timeout values are unsigned int. Some drivers
 use signed int, so this has to be converted, too.
 
-Here is a simple example for a watchdog device:
+Here is a simple example for a watchdog device::
 
-+static struct watchdog_device s3c2410_wdd = {
-+       .info = &s3c2410_wdt_ident,
-+       .ops = &s3c2410wdt_ops,
-+};
+  +static struct watchdog_device s3c2410_wdd = {
+  +       .info = &s3c2410_wdt_ident,
+  +       .ops = &s3c2410wdt_ops,
+  +};
 
 
 Handle the 'nowayout' feature
@@ -173,12 +175,12 @@ Handle the 'nowayout' feature
 A few drivers use nowayout statically, i.e. there is no module parameter for it
 and only CONFIG_WATCHDOG_NOWAYOUT determines if the feature is going to be
 used. This needs to be converted by initializing the status variable of the
-watchdog_device like this:
+watchdog_device like this::
 
         .status = WATCHDOG_NOWAYOUT_INIT_STATUS,
 
 Most drivers, however, also allow runtime configuration of nowayout, usually
-by adding a module parameter. The conversion for this would be something like:
+by adding a module parameter. The conversion for this would be something like::
 
 	watchdog_set_nowayout(&s3c2410_wdd, nowayout);
 
@@ -191,15 +193,15 @@ Register the watchdog device
 
 Replace misc_register(&miscdev) with watchdog_register_device(&watchdog_dev).
 Make sure the return value gets checked and the error message, if present,
-still fits. Also convert the unregister case.
+still fits. Also convert the unregister case::
 
--       ret = misc_register(&s3c2410wdt_miscdev);
-+       ret = watchdog_register_device(&s3c2410_wdd);
+  -       ret = misc_register(&s3c2410wdt_miscdev);
+  +       ret = watchdog_register_device(&s3c2410_wdd);
 
-...
+  ...
 
--       misc_deregister(&s3c2410wdt_miscdev);
-+       watchdog_unregister_device(&s3c2410_wdd);
+  -       misc_deregister(&s3c2410wdt_miscdev);
+  +       watchdog_unregister_device(&s3c2410_wdd);
 
 
 Update the Kconfig-entry
@@ -207,7 +209,7 @@ Update the Kconfig-entry
 
 The entry for the driver now needs to select WATCHDOG_CORE:
 
-+       select WATCHDOG_CORE
+  +       select WATCHDOG_CORE
 
 
 Create a patch and send it to upstream
@@ -215,4 +217,3 @@ Create a patch and send it to upstream
 
 Make sure you understood Documentation/process/submitting-patches.rst and send your patch to
 linux-watchdog@vger.kernel.org. We are looking forward to it :)
-

Documentation/watchdog/hpwdt.txt → Documentation/watchdog/hpwdt.rst

+===========================
+HPE iLO NMI Watchdog Driver
+===========================
+
+for iLO based ProLiant Servers
+==============================
+
 Last reviewed: 08/20/2018
 
-                     HPE iLO NMI Watchdog Driver
-                   for iLO based ProLiant Servers
 
  The HPE iLO NMI Watchdog driver is a kernel module that provides basic
  watchdog functionality and handler for the iLO "Generate NMI to System"
@@ -20,23 +25,26 @@ Last reviewed: 08/20/2018
 
  The hpwdt driver also has the following module parameters:
 
- soft_margin - allows the user to set the watchdog timer value.
+ ============  ================================================================
+ soft_margin   allows the user to set the watchdog timer value.
                Default value is 30 seconds.
- timeout     - an alias of soft_margin.
- pretimeout  - allows the user to set the watchdog pretimeout value.
+ timeout       an alias of soft_margin.
+ pretimeout    allows the user to set the watchdog pretimeout value.
                This is the number of seconds before timeout when an
                NMI is delivered to the system. Setting the value to
                zero disables the pretimeout NMI.
                Default value is 9 seconds.
- nowayout    - basic watchdog parameter that does not allow the timer to
+ nowayout      basic watchdog parameter that does not allow the timer to
                be restarted or an impending ASR to be escaped.
                Default value is set when compiling the kernel. If it is set
                to "Y", then there is no way of disabling the watchdog once
                it has been started.
+ ============  ================================================================
 
- NOTE: More information about watchdog drivers in general, including the ioctl
+ NOTE:
+       More information about watchdog drivers in general, including the ioctl
        interface to /dev/watchdog can be found in
-       Documentation/watchdog/watchdog-api.txt and Documentation/IPMI.txt.
+       Documentation/watchdog/watchdog-api.rst and Documentation/IPMI.txt.
 
  Due to limitations in the iLO hardware, the NMI pretimeout if enabled,
  can only be set to 9 seconds.  Attempts to set pretimeout to other
@@ -63,4 +71,3 @@ Last reviewed: 08/20/2018
 
  The HPE iLO NMI Watchdog Driver and documentation were originally developed
  by Tom Mingarelli.
-

Documentation/watchdog/index.rst

+:orphan:
+
+======================
+Linux Watchdog Support
+======================
+
+.. toctree::
+    :maxdepth: 1
+
+    hpwdt
+    mlx-wdt
+    pcwd-watchdog
+    watchdog-api
+    watchdog-kernel-api
+    watchdog-parameters
+    watchdog-pm
+    wdt
+    convert_drivers_to_kernel_api
+
+.. only::  subproject and html
+
+   Indices
+   =======
+
+   * :ref:`genindex`

Documentation/watchdog/mlx-wdt.txt → Documentation/watchdog/mlx-wdt.rst

-		Mellanox watchdog drivers
-		for x86 based system switches
+=========================
+Mellanox watchdog drivers
+=========================
+
+for x86 based system switches
+=============================
 
 This driver provides watchdog functionality for various Mellanox
 Ethernet and Infiniband switch systems.
@@ -9,16 +13,16 @@ Mellanox watchdog device is implemented in a programmable logic device.
 There are 2 types of HW watchdog implementations.
 
 Type 1:
-Actual HW timeout can be defined as a power of 2 msec.
-e.g. timeout 20 sec will be rounded up to 32768 msec.
-The maximum timeout period is 32 sec (32768 msec.),
-Get time-left isn't supported
+  Actual HW timeout can be defined as a power of 2 msec.
+  e.g. timeout 20 sec will be rounded up to 32768 msec.
+  The maximum timeout period is 32 sec (32768 msec.),
+  Get time-left isn't supported
 
 Type 2:
-Actual HW timeout is defined in sec. and it's the same as
-a user-defined timeout.
-Maximum timeout is 255 sec.
-Get time-left is supported.
+  Actual HW timeout is defined in sec. and it's the same as
+  a user-defined timeout.
+  Maximum timeout is 255 sec.
+  Get time-left is supported.
 
 Type 1 HW watchdog implementation exist in old systems and
 all new systems have type 2 HW watchdog.

Documentation/watchdog/pcwd-watchdog.txt → Documentation/watchdog/pcwd-watchdog.rst

+===================================
+Berkshire Products PC Watchdog Card
+===================================
+
 Last reviewed: 10/05/2007
 
-                     Berkshire Products PC Watchdog Card
-                   Support for ISA Cards  Revision A and C
-           Documentation and Driver by Ken Hollis <kenji@bitgate.com>
+Support for ISA Cards  Revision A and C
+=======================================
+
+Documentation and Driver by Ken Hollis <kenji@bitgate.com>
 
  The PC Watchdog is a card that offers the same type of functionality that
  the WDT card does, only it doesn't require an IRQ to run.  Furthermore,
@@ -33,6 +38,7 @@ Last reviewed: 10/05/2007
 	WDIOC_GETSUPPORT
 		This returns the support of the card itself.  This
 		returns in structure "PCWDS" which returns:
+
 			options = WDIOS_TEMPPANIC
 				  (This card supports temperature)
 			firmware_version = xxxx
@@ -63,4 +69,3 @@ Last reviewed: 10/05/2007
 
  -- Ken Hollis
     (kenji@bitgate.com)
-

Documentation/watchdog/watchdog-api.txt → Documentation/watchdog/watchdog-api.rst

+=============================
+The Linux Watchdog driver API
+=============================
+
 Last reviewed: 10/05/2007
 
 
-The Linux Watchdog driver API.
 
 Copyright 2002 Christer Weingel <wingel@nano-system.com>
 
@@ -10,7 +13,8 @@ driver which is (c) Copyright 2000 Jakob Oestergaard <jakob@ostenfeld.dk>
 
 This document describes the state of the Linux 2.4.18 kernel.
 
-Introduction:
+Introduction
+============
 
 A Watchdog Timer (WDT) is a hardware circuit that can reset the
 computer system in case of a software fault.  You probably knew that
@@ -30,7 +34,8 @@ drivers implement different, and sometimes incompatible, parts of it.
 This file is an attempt to document the existing usage and allow
 future driver writers to use it as a reference.
 
-The simplest API:
+The simplest API
+================
 
 All drivers support the basic mode of operation, where the watchdog
 activates as soon as /dev/watchdog is opened and will reboot unless
@@ -54,7 +59,8 @@ after the timeout has passed. Watchdog devices also usually support
 the nowayout module parameter so that this option can be controlled at
 runtime.
 
-Magic Close feature:
+Magic Close feature
+===================
 
 If a driver supports "Magic Close", the driver will not disable the
 watchdog unless a specific magic character 'V' has been sent to
@@ -64,7 +70,8 @@ will assume that the daemon (and userspace in general) died, and will
 stop pinging the watchdog without disabling it first.  This will then
 cause a reboot if the watchdog is not re-opened in sufficient time.
 
-The ioctl API:
+The ioctl API
+=============
 
 All conforming drivers also support an ioctl API.
 
@@ -73,7 +80,7 @@ Pinging the watchdog using an ioctl:
 All drivers that have an ioctl interface support at least one ioctl,
 KEEPALIVE.  This ioctl does exactly the same thing as a write to the
 watchdog device, so the main loop in the above program could be
-replaced with:
+replaced with::
 
 	while (1) {
 		ioctl(fd, WDIOC_KEEPALIVE, 0);
@@ -82,14 +89,15 @@ replaced with:
 
 the argument to the ioctl is ignored.
 
-Setting and getting the timeout:
+Setting and getting the timeout
+===============================
 
 For some drivers it is possible to modify the watchdog timeout on the
 fly with the SETTIMEOUT ioctl, those drivers have the WDIOF_SETTIMEOUT
 flag set in their option field.  The argument is an integer
 representing the timeout in seconds.  The driver returns the real
 timeout used in the same variable, and this timeout might differ from
-the requested one due to limitation of the hardware.
+the requested one due to limitation of the hardware::
 
     int timeout = 45;
     ioctl(fd, WDIOC_SETTIMEOUT, &timeout);
@@ -99,18 +107,19 @@ This example might actually print "The timeout was set to 60 seconds"
 if the device has a granularity of minutes for its timeout.
 
 Starting with the Linux 2.4.18 kernel, it is possible to query the
-current timeout using the GETTIMEOUT ioctl.
+current timeout using the GETTIMEOUT ioctl::
 
     ioctl(fd, WDIOC_GETTIMEOUT, &timeout);
     printf("The timeout was is %d seconds\n", timeout);
 
-Pretimeouts:
+Pretimeouts
+===========
 
 Some watchdog timers can be set to have a trigger go off before the
 actual time they will reset the system.  This can be done with an NMI,
 interrupt, or other mechanism.  This allows Linux to record useful
 information (like panic information and kernel coredumps) before it
-resets.
+resets::
 
     pretimeout = 10;
     ioctl(fd, WDIOC_SETPRETIMEOUT, &pretimeout);
@@ -121,89 +130,113 @@ the pretimeout.  So, for instance, if you set the timeout to 60 seconds
 and the pretimeout to 10 seconds, the pretimeout will go off in 50
 seconds.  Setting a pretimeout to zero disables it.
 
-There is also a get function for getting the pretimeout:
+There is also a get function for getting the pretimeout::
 
     ioctl(fd, WDIOC_GETPRETIMEOUT, &timeout);
     printf("The pretimeout was is %d seconds\n", timeout);
 
 Not all watchdog drivers will support a pretimeout.
 
-Get the number of seconds before reboot:
+Get the number of seconds before reboot
+=======================================
 
 Some watchdog drivers have the ability to report the remaining time
 before the system will reboot. The WDIOC_GETTIMELEFT is the ioctl
-that returns the number of seconds before reboot.
+that returns the number of seconds before reboot::
 
     ioctl(fd, WDIOC_GETTIMELEFT, &timeleft);
     printf("The timeout was is %d seconds\n", timeleft);
 
-Environmental monitoring:
+Environmental monitoring
+========================
 
 All watchdog drivers are required return more information about the system,
 some do temperature, fan and power level monitoring, some can tell you
 the reason for the last reboot of the system.  The GETSUPPORT ioctl is
-available to ask what the device can do:
+available to ask what the device can do::
 
 	struct watchdog_info ident;
 	ioctl(fd, WDIOC_GETSUPPORT, &ident);
 
 the fields returned in the ident struct are:
 
+	================	=============================================
         identity		a string identifying the watchdog driver
 	firmware_version	the firmware version of the card if available
 	options			a flags describing what the device supports
+	================	=============================================
 
 the options field can have the following bits set, and describes what
 kind of information that the GET_STATUS and GET_BOOT_STATUS ioctls can
 return.   [FIXME -- Is this correct?]
 
+	================	=========================
 	WDIOF_OVERHEAT		Reset due to CPU overheat
+	================	=========================
 
 The machine was last rebooted by the watchdog because the thermal limit was
-exceeded
+exceeded:
 
+	==============		==========
 	WDIOF_FANFAULT		Fan failed
+	==============		==========
 
 A system fan monitored by the watchdog card has failed
 
+	=============		================
 	WDIOF_EXTERN1		External relay 1
+	=============		================
 
 External monitoring relay/source 1 was triggered. Controllers intended for
 real world applications include external monitoring pins that will trigger
 a reset.
 
+	=============		================
 	WDIOF_EXTERN2		External relay 2
+	=============		================
 
 External monitoring relay/source 2 was triggered
 
+	================	=====================
 	WDIOF_POWERUNDER	Power bad/power fault
+	================	=====================
 
 The machine is showing an undervoltage status
 
+	===============		=============================
 	WDIOF_CARDRESET		Card previously reset the CPU
+	===============		=============================
 
 The last reboot was caused by the watchdog card
 
+	================	=====================
 	WDIOF_POWEROVER		Power over voltage
+	================	=====================
 
 The machine is showing an overvoltage status. Note that if one level is
 under and one over both bits will be set - this may seem odd but makes
 sense.
 
+	===================	=====================
 	WDIOF_KEEPALIVEPING	Keep alive ping reply
+	===================	=====================
 
 The watchdog saw a keepalive ping since it was last queried.
 
+	================	=======================
 	WDIOF_SETTIMEOUT	Can set/get the timeout
+	================	=======================
 
 The watchdog can do pretimeouts.
 
+	================	================================
 	WDIOF_PRETIMEOUT	Pretimeout (in seconds), get/set
+	================	================================
 
 
 For those drivers that return any bits set in the option field, the
 GETSTATUS and GETBOOTSTATUS ioctls can be used to ask for the current
-status, and the status at the last reboot, respectively.  
+status, and the status at the last reboot, respectively::
 
     int flags;
     ioctl(fd, WDIOC_GETSTATUS, &flags);
@@ -216,22 +249,23 @@ Note that not all devices support these two calls, and some only
 support the GETBOOTSTATUS call.
 
 Some drivers can measure the temperature using the GETTEMP ioctl.  The
-returned value is the temperature in degrees fahrenheit.
+returned value is the temperature in degrees fahrenheit::
 
     int temperature;
     ioctl(fd, WDIOC_GETTEMP, &temperature);
 
 Finally the SETOPTIONS ioctl can be used to control some aspects of
-the cards operation.
+the cards operation::
 
     int options = 0;
     ioctl(fd, WDIOC_SETOPTIONS, &options);
 
 The following options are available:
 
+	=================	================================
 	WDIOS_DISABLECARD	Turn off the watchdog timer
 	WDIOS_ENABLECARD	Turn on the watchdog timer
 	WDIOS_TEMPPANIC		Kernel panic on temperature trip
+	=================	================================
 
 [FIXME -- better explanations]
-

Documentation/watchdog/watchdog-pm.txt → Documentation/watchdog/watchdog-pm.rst

+===============================================
 The Linux WatchDog Timer Power Management Guide
 ===============================================
+
 Last reviewed: 17-Dec-2018
 
 Wolfram Sang <wsa+renesas@sang-engineering.com>
@@ -16,4 +18,5 @@ On resume, a watchdog timer shall be reset to its selected value to give
 userspace enough time to resume. [1] [2]
 
 [1] https://patchwork.kernel.org/patch/10252209/
+
 [2] https://patchwork.kernel.org/patch/10711625/

Documentation/watchdog/wdt.txt → Documentation/watchdog/wdt.rst

+============================================================
+WDT Watchdog Timer Interfaces For The Linux Operating System
+============================================================
+
 Last Reviewed: 10/05/2007
 
-	WDT Watchdog Timer Interfaces For The Linux Operating System
-		Alan Cox <alan@lxorguk.ukuu.org.uk>
+Alan Cox <alan@lxorguk.ukuu.org.uk>
 
-	ICS	WDT501-P
-	ICS	WDT501-P (no fan tachometer)
-	ICS	WDT500-P
+	- ICS	WDT501-P
+	- ICS	WDT501-P (no fan tachometer)
+	- ICS	WDT500-P
 
 All the interfaces provide /dev/watchdog, which when open must be written
 to within a timeout or the machine will reboot. Each write delays the reboot
@@ -21,19 +24,26 @@ degrees Fahrenheit. Each read returns a single byte giving the temperature.
 The third interface logs kernel messages on additional alert events.
 
 The ICS ISA-bus wdt card cannot be safely probed for. Instead you need to
-pass IO address and IRQ boot parameters.  E.g.:
+pass IO address and IRQ boot parameters.  E.g.::
+
 	wdt.io=0x240 wdt.irq=11
 
 Other "wdt" driver parameters are:
+
+	===========	======================================================
 	heartbeat	Watchdog heartbeat in seconds (default 60)
 	nowayout	Watchdog cannot be stopped once started (kernel
-				build parameter)
+			build parameter)
 	tachometer	WDT501-P Fan Tachometer support (0=disable, default=0)
 	type		WDT501-P Card type (500 or 501, default=500)
+	===========	======================================================
 
 Features
 --------
-		WDT501P		WDT500P
+
+================   =======	   =======
+		   WDT501P	   WDT500P
+================   =======	   =======
 Reboot Timer	   X               X
 External Reboot	   X	           X
 I/O Port Monitor   o		   o
@@ -42,9 +52,12 @@ Fan Speed          X		   o
 Power Under	   X               o
 Power Over         X               o
 Overheat           X               o
+================   =======	   =======
 
 The external event interfaces on the WDT boards are not currently supported.
 Minor numbers are however allocated for it.
 
 
-Example Watchdog Driver:  see samples/watchdog/watchdog-simple.c
+Example Watchdog Driver:
+
+	see samples/watchdog/watchdog-simple.c

MAINTAINERS

@@ -7009,7 +7009,7 @@ F:	drivers/media/usb/hdpvr/
 HEWLETT PACKARD ENTERPRISE ILO NMI WATCHDOG DRIVER
 M:	Jerry Hoemann <jerry.hoemann@hpe.com>
 S:	Supported
-F:	Documentation/watchdog/hpwdt.txt
+F:	Documentation/watchdog/hpwdt.rst
 F:	drivers/watchdog/hpwdt.c
 
 HEWLETT-PACKARD SMART ARRAY RAID DRIVER (hpsa)

drivers/watchdog/Kconfig

@@ -18,7 +18,7 @@ menuconfig WATCHDOG
 	  reboot the machine) and a driver for hardware watchdog boards, which
 	  are more robust and can also keep track of the temperature inside
 	  your computer. For details, read
-	  <file:Documentation/watchdog/watchdog-api.txt> in the kernel source.
+	  <file:Documentation/watchdog/watchdog-api.rst> in the kernel source.
 
 	  The watchdog is usually used together with the watchdog daemon
 	  which is available from
@@ -1870,7 +1870,7 @@ config BOOKE_WDT
 	  Watchdog driver for PowerPC Book-E chips, such as the Freescale
 	  MPC85xx SOCs and the IBM PowerPC 440.
 
-	  Please see Documentation/watchdog/watchdog-api.txt for
+	  Please see Documentation/watchdog/watchdog-api.rst for
 	  more information.
 
 config BOOKE_WDT_DEFAULT_TIMEOUT
@@ -2019,7 +2019,7 @@ config PCWATCHDOG
 	  This card simply watches your kernel to make sure it doesn't freeze,
 	  and if it does, it reboots your computer after a certain amount of
 	  time. This driver is like the WDT501 driver but for different
-	  hardware. Please read <file:Documentation/watchdog/pcwd-watchdog.txt>. The PC
+	  hardware. Please read <file:Documentation/watchdog/pcwd-watchdog.rst>. The PC
 	  watchdog cards can be ordered from <http://www.berkprod.com/>.
 
 	  To compile this driver as a module, choose M here: the

drivers/watchdog/smsc37b787_wdt.c

@@ -36,7 +36,7 @@
  *  mknod /dev/watchdog c 10 130
  *
  * For an example userspace keep-alive daemon, see:
- *   Documentation/watchdog/wdt.txt
+ *   Documentation/watchdog/wdt.rst
  */
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt