Commit cc41ac7c authored by Jesse Brandeburg's avatar Jesse Brandeburg Committed by Jeff Garzik

ixgbe: fix dca hints going to wrong processor

hardware was configured incorrectly which led all hints to be
sent to queue[0]'s DCA configuration.
Signed-off-by: default avatarJesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: default avatarJeff Garzik <jgarzik@redhat.com>
parent e9990a9c
......@@ -1410,10 +1410,51 @@ static void ixgbe_configure_tx(struct ixgbe_adapter *adapter)
}
}
#define PAGE_USE_COUNT(S) (((S) >> PAGE_SHIFT) + \
(((S) & (PAGE_SIZE - 1)) ? 1 : 0))
#define IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT 2
static void ixgbe_configure_srrctl(struct ixgbe_adapter *adapter, int index)
{
struct ixgbe_ring *rx_ring;
u32 srrctl;
int queue0;
unsigned long *mask, maskval = 1;
long shift, len;
if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) {
mask = (unsigned long *) &adapter->ring_feature[RING_F_RSS].mask;
len = sizeof(adapter->ring_feature[RING_F_RSS].mask) * 8;
} else {
mask = &maskval;
len = 1;
}
shift = find_first_bit(mask, len);
queue0 = index << shift;
rx_ring = &adapter->rx_ring[queue0];
srrctl = IXGBE_READ_REG(&adapter->hw, IXGBE_SRRCTL(index));
srrctl &= ~IXGBE_SRRCTL_BSIZEHDR_MASK;
srrctl &= ~IXGBE_SRRCTL_BSIZEPKT_MASK;
if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) {
srrctl |= IXGBE_RXBUFFER_2048 >> IXGBE_SRRCTL_BSIZEPKT_SHIFT;
srrctl |= IXGBE_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS;
srrctl |= ((IXGBE_RX_HDR_SIZE <<
IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT) &
IXGBE_SRRCTL_BSIZEHDR_MASK);
} else {
srrctl |= IXGBE_SRRCTL_DESCTYPE_ADV_ONEBUF;
if (rx_ring->rx_buf_len == MAXIMUM_ETHERNET_VLAN_SIZE)
srrctl |= IXGBE_RXBUFFER_2048 >>
IXGBE_SRRCTL_BSIZEPKT_SHIFT;
else
srrctl |= rx_ring->rx_buf_len >>
IXGBE_SRRCTL_BSIZEPKT_SHIFT;
}
IXGBE_WRITE_REG(&adapter->hw, IXGBE_SRRCTL(index), srrctl);
}
#define IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT 2
/**
* ixgbe_get_skb_hdr - helper function for LRO header processing
* @skb: pointer to sk_buff to be added to LRO packet
......@@ -1441,6 +1482,9 @@ static int ixgbe_get_skb_hdr(struct sk_buff *skb, void **iphdr, void **tcph,
return 0;
}
#define PAGE_USE_COUNT(S) (((S) >> PAGE_SHIFT) + \
(((S) & (PAGE_SIZE - 1)) ? 1 : 0))
/**
* ixgbe_configure_rx - Configure 8259x Receive Unit after Reset
* @adapter: board private structure
......@@ -1460,7 +1504,8 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)
0x6A3E67EA, 0x14364D17, 0x3BED200D};
u32 fctrl, hlreg0;
u32 pages;
u32 reta = 0, mrqc, srrctl;
u32 reta = 0, mrqc;
u32 rdrxctl;
int rx_buf_len;
/* Decide whether to use packet split mode or not */
......@@ -1493,27 +1538,6 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)
pages = PAGE_USE_COUNT(adapter->netdev->mtu);
srrctl = IXGBE_READ_REG(&adapter->hw, IXGBE_SRRCTL(0));
srrctl &= ~IXGBE_SRRCTL_BSIZEHDR_MASK;
srrctl &= ~IXGBE_SRRCTL_BSIZEPKT_MASK;
if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) {
srrctl |= PAGE_SIZE >> IXGBE_SRRCTL_BSIZEPKT_SHIFT;
srrctl |= IXGBE_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS;
srrctl |= ((IXGBE_RX_HDR_SIZE <<
IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT) &
IXGBE_SRRCTL_BSIZEHDR_MASK);
} else {
srrctl |= IXGBE_SRRCTL_DESCTYPE_ADV_ONEBUF;
if (rx_buf_len == MAXIMUM_ETHERNET_VLAN_SIZE)
srrctl |=
IXGBE_RXBUFFER_2048 >> IXGBE_SRRCTL_BSIZEPKT_SHIFT;
else
srrctl |= rx_buf_len >> IXGBE_SRRCTL_BSIZEPKT_SHIFT;
}
IXGBE_WRITE_REG(&adapter->hw, IXGBE_SRRCTL(0), srrctl);
rdlen = adapter->rx_ring[0].count * sizeof(union ixgbe_adv_rx_desc);
/* disable receives while setting up the descriptors */
rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
......@@ -1542,8 +1566,24 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)
adapter->rx_ring[i].lro_mgr.dev = adapter->netdev;
adapter->rx_ring[i].lro_mgr.ip_summed = CHECKSUM_UNNECESSARY;
adapter->rx_ring[i].lro_mgr.ip_summed_aggr = CHECKSUM_UNNECESSARY;
ixgbe_configure_srrctl(adapter, j);
}
/*
* For VMDq support of different descriptor types or
* buffer sizes through the use of multiple SRRCTL
* registers, RDRXCTL.MVMEN must be set to 1
*
* also, the manual doesn't mention it clearly but DCA hints
* will only use queue 0's tags unless this bit is set. Side
* effects of setting this bit are only that SRRCTL must be
* fully programmed [0..15]
*/
rdrxctl = IXGBE_READ_REG(hw, IXGBE_RDRXCTL);
rdrxctl |= IXGBE_RDRXCTL_MVMEN;
IXGBE_WRITE_REG(hw, IXGBE_RDRXCTL, rdrxctl);
if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) {
/* Fill out redirection table */
......
......@@ -356,12 +356,10 @@
#define IXGBE_ANLP2 0x042B4
#define IXGBE_ATLASCTL 0x04800
/* RSCCTL Bit Masks */
#define IXGBE_RSCCTL_RSCEN 0x01
#define IXGBE_RSCCTL_MAXDESC_1 0x00
#define IXGBE_RSCCTL_MAXDESC_4 0x04
#define IXGBE_RSCCTL_MAXDESC_8 0x08
#define IXGBE_RSCCTL_MAXDESC_16 0x0C
/* RDRXCTL Bit Masks */
#define IXGBE_RDRXCTL_RDMTS_1_2 0x00000000 /* Rx Desc Min Threshold Size */
#define IXGBE_RDRXCTL_MVMEN 0x00000020
#define IXGBE_RDRXCTL_DMAIDONE 0x00000008 /* DMA init cycle done */
/* CTRL Bit Masks */
#define IXGBE_CTRL_GIO_DIS 0x00000004 /* Global IO Master Disable bit */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment