Commit ccbeed3a authored by Tejun Heo's avatar Tejun Heo Committed by Ingo Molnar

x86: make lazy %gs optional on x86_32

Impact: pt_regs changed, lazy gs handling made optional, add slight
        overhead to SAVE_ALL, simplifies error_code path a bit

On x86_32, %gs hasn't been used by kernel and handled lazily.  pt_regs
doesn't have place for it and gs is saved/loaded only when necessary.
In preparation for stack protector support, this patch makes lazy %gs
handling optional by doing the followings.

* Add CONFIG_X86_32_LAZY_GS and place for gs in pt_regs.

* Save and restore %gs along with other registers in entry_32.S unless
  LAZY_GS.  Note that this unfortunately adds "pushl $0" on SAVE_ALL
  even when LAZY_GS.  However, it adds no overhead to common exit path
  and simplifies entry path with error code.

* Define different user_gs accessors depending on LAZY_GS and add
  lazy_save_gs() and lazy_load_gs() which are noop if !LAZY_GS.  The
  lazy_*_gs() ops are used to save, load and clear %gs lazily.

* Define ELF_CORE_COPY_KERNEL_REGS() which always read %gs directly.

xen and lguest changes need to be verified.
Signed-off-by: default avatarTejun Heo <tj@kernel.org>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
parent d9a89a26
......@@ -207,6 +207,10 @@ config X86_TRAMPOLINE
depends on X86_SMP || (X86_VOYAGER && SMP) || (64BIT && ACPI_SLEEP)
default y
config X86_32_LAZY_GS
def_bool y
depends on X86_32
config KTIME_SCALAR
def_bool X86_32
source "init/Kconfig"
......
......@@ -112,7 +112,7 @@ extern unsigned int vdso_enabled;
* now struct_user_regs, they are different)
*/
#define ELF_CORE_COPY_REGS(pr_reg, regs) \
#define ELF_CORE_COPY_REGS_COMMON(pr_reg, regs) \
do { \
pr_reg[0] = regs->bx; \
pr_reg[1] = regs->cx; \
......@@ -124,7 +124,6 @@ do { \
pr_reg[7] = regs->ds & 0xffff; \
pr_reg[8] = regs->es & 0xffff; \
pr_reg[9] = regs->fs & 0xffff; \
pr_reg[10] = get_user_gs(regs); \
pr_reg[11] = regs->orig_ax; \
pr_reg[12] = regs->ip; \
pr_reg[13] = regs->cs & 0xffff; \
......@@ -133,6 +132,18 @@ do { \
pr_reg[16] = regs->ss & 0xffff; \
} while (0);
#define ELF_CORE_COPY_REGS(pr_reg, regs) \
do { \
ELF_CORE_COPY_REGS_COMMON(pr_reg, regs);\
pr_reg[10] = get_user_gs(regs); \
} while (0);
#define ELF_CORE_COPY_KERNEL_REGS(pr_reg, regs) \
do { \
ELF_CORE_COPY_REGS_COMMON(pr_reg, regs);\
savesegment(gs, pr_reg[10]); \
} while (0);
#define ELF_PLATFORM (utsname()->machine)
#define set_personality_64bit() do { } while (0)
......
......@@ -79,7 +79,7 @@ do { \
#ifdef CONFIG_X86_32
#define deactivate_mm(tsk, mm) \
do { \
set_user_gs(task_pt_regs(tsk), 0); \
lazy_load_gs(0); \
} while (0)
#else
#define deactivate_mm(tsk, mm) \
......
......@@ -28,7 +28,7 @@ struct pt_regs {
int xds;
int xes;
int xfs;
/* int gs; */
int xgs;
long orig_eax;
long eip;
int xcs;
......@@ -50,7 +50,7 @@ struct pt_regs {
unsigned long ds;
unsigned long es;
unsigned long fs;
/* int gs; */
unsigned long gs;
unsigned long orig_ax;
unsigned long ip;
unsigned long cs;
......
......@@ -186,10 +186,20 @@ extern void native_load_gs_index(unsigned);
* x86_32 user gs accessors.
*/
#ifdef CONFIG_X86_32
#ifdef CONFIG_X86_32_LAZY_GS
#define get_user_gs(regs) (u16)({unsigned long v; savesegment(gs, v); v;})
#define set_user_gs(regs, v) loadsegment(gs, (unsigned long)(v))
#define task_user_gs(tsk) ((tsk)->thread.gs)
#endif
#define lazy_save_gs(v) savesegment(gs, (v))
#define lazy_load_gs(v) loadsegment(gs, (v))
#else /* X86_32_LAZY_GS */
#define get_user_gs(regs) (u16)((regs)->gs)
#define set_user_gs(regs, v) do { (regs)->gs = (v); } while (0)
#define task_user_gs(tsk) (task_pt_regs(tsk)->gs)
#define lazy_save_gs(v) do { } while (0)
#define lazy_load_gs(v) do { } while (0)
#endif /* X86_32_LAZY_GS */
#endif /* X86_32 */
static inline unsigned long get_limit(unsigned long segment)
{
......
......@@ -75,6 +75,7 @@ void foo(void)
OFFSET(PT_DS, pt_regs, ds);
OFFSET(PT_ES, pt_regs, es);
OFFSET(PT_FS, pt_regs, fs);
OFFSET(PT_GS, pt_regs, gs);
OFFSET(PT_ORIG_EAX, pt_regs, orig_ax);
OFFSET(PT_EIP, pt_regs, ip);
OFFSET(PT_CS, pt_regs, cs);
......
......@@ -30,12 +30,13 @@
* 1C(%esp) - %ds
* 20(%esp) - %es
* 24(%esp) - %fs
* 28(%esp) - orig_eax
* 2C(%esp) - %eip
* 30(%esp) - %cs
* 34(%esp) - %eflags
* 38(%esp) - %oldesp
* 3C(%esp) - %oldss
* 28(%esp) - %gs saved iff !CONFIG_X86_32_LAZY_GS
* 2C(%esp) - orig_eax
* 30(%esp) - %eip
* 34(%esp) - %cs
* 38(%esp) - %eflags
* 3C(%esp) - %oldesp
* 40(%esp) - %oldss
*
* "current" is in register %ebx during any slow entries.
*/
......@@ -101,8 +102,99 @@
#define resume_userspace_sig resume_userspace
#endif
/*
* User gs save/restore
*
* %gs is used for userland TLS and kernel only uses it for stack
* canary which is required to be at %gs:20 by gcc. Read the comment
* at the top of stackprotector.h for more info.
*
* Local labels 98 and 99 are used.
*/
#ifdef CONFIG_X86_32_LAZY_GS
/* unfortunately push/pop can't be no-op */
.macro PUSH_GS
pushl $0
CFI_ADJUST_CFA_OFFSET 4
.endm
.macro POP_GS pop=0
addl $(4 + \pop), %esp
CFI_ADJUST_CFA_OFFSET -(4 + \pop)
.endm
.macro POP_GS_EX
.endm
/* all the rest are no-op */
.macro PTGS_TO_GS
.endm
.macro PTGS_TO_GS_EX
.endm
.macro GS_TO_REG reg
.endm
.macro REG_TO_PTGS reg
.endm
.macro SET_KERNEL_GS reg
.endm
#else /* CONFIG_X86_32_LAZY_GS */
.macro PUSH_GS
pushl %gs
CFI_ADJUST_CFA_OFFSET 4
/*CFI_REL_OFFSET gs, 0*/
.endm
.macro POP_GS pop=0
98: popl %gs
CFI_ADJUST_CFA_OFFSET -4
/*CFI_RESTORE gs*/
.if \pop <> 0
add $\pop, %esp
CFI_ADJUST_CFA_OFFSET -\pop
.endif
.endm
.macro POP_GS_EX
.pushsection .fixup, "ax"
99: movl $0, (%esp)
jmp 98b
.section __ex_table, "a"
.align 4
.long 98b, 99b
.popsection
.endm
.macro PTGS_TO_GS
98: mov PT_GS(%esp), %gs
.endm
.macro PTGS_TO_GS_EX
.pushsection .fixup, "ax"
99: movl $0, PT_GS(%esp)
jmp 98b
.section __ex_table, "a"
.align 4
.long 98b, 99b
.popsection
.endm
.macro GS_TO_REG reg
movl %gs, \reg
/*CFI_REGISTER gs, \reg*/
.endm
.macro REG_TO_PTGS reg
movl \reg, PT_GS(%esp)
/*CFI_REL_OFFSET gs, PT_GS*/
.endm
.macro SET_KERNEL_GS reg
xorl \reg, \reg
movl \reg, %gs
.endm
#endif /* CONFIG_X86_32_LAZY_GS */
.macro SAVE_ALL
cld
PUSH_GS
pushl %fs
CFI_ADJUST_CFA_OFFSET 4
/*CFI_REL_OFFSET fs, 0;*/
......@@ -138,6 +230,7 @@
movl %edx, %es
movl $(__KERNEL_PERCPU), %edx
movl %edx, %fs
SET_KERNEL_GS %edx
.endm
.macro RESTORE_INT_REGS
......@@ -164,7 +257,7 @@
CFI_RESTORE eax
.endm
.macro RESTORE_REGS
.macro RESTORE_REGS pop=0
RESTORE_INT_REGS
1: popl %ds
CFI_ADJUST_CFA_OFFSET -4
......@@ -175,6 +268,7 @@
3: popl %fs
CFI_ADJUST_CFA_OFFSET -4
/*CFI_RESTORE fs;*/
POP_GS \pop
.pushsection .fixup, "ax"
4: movl $0, (%esp)
jmp 1b
......@@ -188,6 +282,7 @@
.long 2b, 5b
.long 3b, 6b
.popsection
POP_GS_EX
.endm
.macro RING0_INT_FRAME
......@@ -368,6 +463,7 @@ sysenter_exit:
xorl %ebp,%ebp
TRACE_IRQS_ON
1: mov PT_FS(%esp), %fs
PTGS_TO_GS
ENABLE_INTERRUPTS_SYSEXIT
#ifdef CONFIG_AUDITSYSCALL
......@@ -416,6 +512,7 @@ sysexit_audit:
.align 4
.long 1b,2b
.popsection
PTGS_TO_GS_EX
ENDPROC(ia32_sysenter_target)
# system call handler stub
......@@ -458,8 +555,7 @@ restore_all:
restore_nocheck:
TRACE_IRQS_IRET
restore_nocheck_notrace:
RESTORE_REGS
addl $4, %esp # skip orig_eax/error_code
RESTORE_REGS 4 # skip orig_eax/error_code
CFI_ADJUST_CFA_OFFSET -4
irq_return:
INTERRUPT_RETURN
......@@ -1078,7 +1174,10 @@ ENTRY(page_fault)
CFI_ADJUST_CFA_OFFSET 4
ALIGN
error_code:
/* the function address is in %fs's slot on the stack */
/* the function address is in %gs's slot on the stack */
pushl %fs
CFI_ADJUST_CFA_OFFSET 4
/*CFI_REL_OFFSET fs, 0*/
pushl %es
CFI_ADJUST_CFA_OFFSET 4
/*CFI_REL_OFFSET es, 0*/
......@@ -1107,20 +1206,15 @@ error_code:
CFI_ADJUST_CFA_OFFSET 4
CFI_REL_OFFSET ebx, 0
cld
pushl %fs
CFI_ADJUST_CFA_OFFSET 4
/*CFI_REL_OFFSET fs, 0*/
movl $(__KERNEL_PERCPU), %ecx
movl %ecx, %fs
UNWIND_ESPFIX_STACK
popl %ecx
CFI_ADJUST_CFA_OFFSET -4
/*CFI_REGISTER es, ecx*/
movl PT_FS(%esp), %edi # get the function address
GS_TO_REG %ecx
movl PT_GS(%esp), %edi # get the function address
movl PT_ORIG_EAX(%esp), %edx # get the error code
movl $-1, PT_ORIG_EAX(%esp) # no syscall to restart
mov %ecx, PT_FS(%esp)
/*CFI_REL_OFFSET fs, ES*/
REG_TO_PTGS %ecx
SET_KERNEL_GS %ecx
movl $(__USER_DS), %ecx
movl %ecx, %ds
movl %ecx, %es
......
......@@ -539,7 +539,7 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
* used %fs or %gs (it does not today), or if the kernel is
* running inside of a hypervisor layer.
*/
savesegment(gs, prev->gs);
lazy_save_gs(prev->gs);
/*
* Load the per-thread Thread-Local Storage descriptor.
......@@ -585,7 +585,7 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
* Restore %gs if needed (which is common)
*/
if (prev->gs | next->gs)
loadsegment(gs, next->gs);
lazy_load_gs(next->gs);
percpu_write(current_task, next_p);
......
......@@ -75,10 +75,7 @@ static inline bool invalid_selector(u16 value)
static unsigned long *pt_regs_access(struct pt_regs *regs, unsigned long regno)
{
BUILD_BUG_ON(offsetof(struct pt_regs, bx) != 0);
regno >>= 2;
if (regno > FS)
--regno;
return &regs->bx + regno;
return &regs->bx + (regno >> 2);
}
static u16 get_segment_reg(struct task_struct *task, unsigned long offset)
......
......@@ -283,7 +283,7 @@ static void lguest_load_tls(struct thread_struct *t, unsigned int cpu)
/* There's one problem which normal hardware doesn't have: the Host
* can't handle us removing entries we're currently using. So we clear
* the GS register here: if it's needed it'll be reloaded anyway. */
loadsegment(gs, 0);
lazy_load_gs(0);
lazy_hcall(LHCALL_LOAD_TLS, __pa(&t->tls_array), cpu, 0);
}
......
......@@ -323,13 +323,14 @@ static void load_TLS_descriptor(struct thread_struct *t,
static void xen_load_tls(struct thread_struct *t, unsigned int cpu)
{
/*
* XXX sleazy hack: If we're being called in a lazy-cpu zone,
* it means we're in a context switch, and %gs has just been
* saved. This means we can zero it out to prevent faults on
* exit from the hypervisor if the next process has no %gs.
* Either way, it has been saved, and the new value will get
* loaded properly. This will go away as soon as Xen has been
* modified to not save/restore %gs for normal hypercalls.
* XXX sleazy hack: If we're being called in a lazy-cpu zone
* and lazy gs handling is enabled, it means we're in a
* context switch, and %gs has just been saved. This means we
* can zero it out to prevent faults on exit from the
* hypervisor if the next process has no %gs. Either way, it
* has been saved, and the new value will get loaded properly.
* This will go away as soon as Xen has been modified to not
* save/restore %gs for normal hypercalls.
*
* On x86_64, this hack is not used for %gs, because gs points
* to KERNEL_GS_BASE (and uses it for PDA references), so we
......@@ -341,7 +342,7 @@ static void xen_load_tls(struct thread_struct *t, unsigned int cpu)
*/
if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_CPU) {
#ifdef CONFIG_X86_32
loadsegment(gs, 0);
lazy_load_gs(0);
#else
loadsegment(fs, 0);
#endif
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment