Merge branch 'remotes/lorenzo/pci/qcom'

- Add Qualcomm PCIe Endpoint controller driver and DT binding (Manivannan
  Sadhasivam)

- Add qcom struct for device-specific details in match data (Prasad
  Malisetty)

- Switch pcie_1_pipe_clk_src from TCXO to pipe clock after PHY init in
  SC7280 (Prasad Malisetty)

- Add .compatible device ID for SC8180x platform (Bjorn Andersson)

* remotes/lorenzo/pci/qcom:
  PCI: qcom: Add sc8180x compatible
  PCI: qcom: Switch pcie_1_pipe_clk_src after PHY init in SC7280
  PCI: qcom: Replace ops with struct pcie_cfg in pcie match data
  MAINTAINERS: Add entry for Qualcomm PCIe Endpoint driver and binding
  PCI: qcom-ep: Add Qualcomm PCIe Endpoint controller driver
  dt-bindings: PCI: Add Qualcomm PCIe Endpoint controller

Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PCIe Endpoint Controller binding
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+allOf:
+  - $ref: "pci-ep.yaml#"
+
+properties:
+  compatible:
+    const: qcom,sdx55-pcie-ep
+
+  reg:
+    items:
+      - description: Qualcomm-specific PARF configuration registers
+      - description: DesignWare PCIe registers
+      - description: External local bus interface registers
+      - description: Address Translation Unit (ATU) registers
+      - description: Memory region used to map remote RC address space
+      - description: BAR memory region
+
+  reg-names:
+    items:
+      - const: parf
+      - const: dbi
+      - const: elbi
+      - const: atu
+      - const: addr_space
+      - const: mmio
+
+  clocks:
+    items:
+      - description: PCIe Auxiliary clock
+      - description: PCIe CFG AHB clock
+      - description: PCIe Master AXI clock
+      - description: PCIe Slave AXI clock
+      - description: PCIe Slave Q2A AXI clock
+      - description: PCIe Sleep clock
+      - description: PCIe Reference clock
+
+  clock-names:
+    items:
+      - const: aux
+      - const: cfg
+      - const: bus_master
+      - const: bus_slave
+      - const: slave_q2a
+      - const: sleep
+      - const: ref
+
+  qcom,perst-regs:
+    description: Reference to a syscon representing TCSR followed by the two
+                 offsets within syscon for Perst enable and Perst separation
+                 enable registers
+    $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    items:
+      minItems: 3
+      maxItems: 3
+
+  interrupts:
+    items:
+      - description: PCIe Global interrupt
+      - description: PCIe Doorbell interrupt
+
+  interrupt-names:
+    items:
+      - const: global
+      - const: doorbell
+
+  reset-gpios:
+    description: GPIO used as PERST# input signal
+    maxItems: 1
+
+  wake-gpios:
+    description: GPIO used as WAKE# output signal
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: core
+
+  power-domains:
+    maxItems: 1
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: pciephy
+
+  num-lanes:
+    default: 2
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - qcom,perst-regs
+  - interrupts
+  - interrupt-names
+  - reset-gpios
+  - resets
+  - reset-names
+  - power-domains
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sdx55.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pcie_ep: pcie-ep@40000000 {
+        compatible = "qcom,sdx55-pcie-ep";
+        reg = <0x01c00000 0x3000>,
+              <0x40000000 0xf1d>,
+              <0x40000f20 0xc8>,
+              <0x40001000 0x1000>,
+              <0x40002000 0x1000>,
+              <0x01c03000 0x3000>;
+        reg-names = "parf", "dbi", "elbi", "atu", "addr_space",
+                    "mmio";
+
+        clocks = <&gcc GCC_PCIE_AUX_CLK>,
+             <&gcc GCC_PCIE_CFG_AHB_CLK>,
+             <&gcc GCC_PCIE_MSTR_AXI_CLK>,
+             <&gcc GCC_PCIE_SLV_AXI_CLK>,
+             <&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>,
+             <&gcc GCC_PCIE_SLEEP_CLK>,
+             <&gcc GCC_PCIE_0_CLKREF_CLK>;
+        clock-names = "aux", "cfg", "bus_master", "bus_slave",
+                      "slave_q2a", "sleep", "ref";
+
+        qcom,perst-regs = <&tcsr 0xb258 0xb270>;
+
+        interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "global", "doorbell";
+        reset-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
+        wake-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>;
+        resets = <&gcc GCC_PCIE_BCR>;
+        reset-names = "core";
+        power-domains = <&gcc PCIE_GDSC>;
+        phys = <&pcie0_lane>;
+        phy-names = "pciephy";
+        max-link-speed = <3>;
+        num-lanes = <2>;
+    };

Documentation/devicetree/bindings/pci/qcom,pcie.txt

@@ -12,6 +12,7 @@
 			- "qcom,pcie-ipq4019" for ipq4019
 			- "qcom,pcie-ipq8074" for ipq8074
 			- "qcom,pcie-qcs404" for qcs404
+			- "qcom,pcie-sc8180x" for sc8180x
 			- "qcom,pcie-sdm845" for sdm845
 			- "qcom,pcie-sm8250" for sm8250
 			- "qcom,pcie-ipq6018" for ipq6018
@@ -156,7 +157,7 @@
 			- "pipe"	PIPE clock
 
 - clock-names:
-	Usage: required for sm8250
+	Usage: required for sc8180x and sm8250
 	Value type: <stringlist>
 	Definition: Should contain the following entries
 			- "aux"		Auxiliary clock
@@ -245,7 +246,7 @@
 			- "ahb"			AHB reset
 
 - reset-names:
-	Usage: required for sdm845 and sm8250
+	Usage: required for sc8180x, sdm845 and sm8250
 	Value type: <stringlist>
 	Definition: Should contain the following entries
 			- "pci"			PCIe core reset

MAINTAINERS

@@ -14618,7 +14618,15 @@ M:	Stanimir Varbanov <svarbanov@mm-sol.com>
 L:	linux-pci@vger.kernel.org
 L:	linux-arm-msm@vger.kernel.org
 S:	Maintained
-F:	drivers/pci/controller/dwc/*qcom*
+F:	drivers/pci/controller/dwc/pcie-qcom.c
+
+PCIE ENDPOINT DRIVER FOR QUALCOMM
+M:	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+L:	linux-pci@vger.kernel.org
+L:	linux-arm-msm@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml
+F:	drivers/pci/controller/dwc/pcie-qcom-ep.c
 
 PCIE DRIVER FOR ROCKCHIP
 M:	Shawn Lin <shawn.lin@rock-chips.com>

drivers/pci/controller/dwc/Kconfig

@@ -178,6 +178,16 @@ config PCIE_QCOM
 	  PCIe controller uses the DesignWare core plus Qualcomm-specific
 	  hardware wrappers.
 
+config PCIE_QCOM_EP
+	tristate "Qualcomm PCIe controller - Endpoint mode"
+	depends on OF && (ARCH_QCOM || COMPILE_TEST)
+	depends on PCI_ENDPOINT
+	select PCIE_DW_EP
+	help
+	  Say Y here to enable support for the PCIe controllers on Qualcomm SoCs
+	  to work in endpoint mode. The PCIe controller uses the DesignWare core
+	  plus Qualcomm-specific hardware wrappers.
+
 config PCIE_ARMADA_8K
 	bool "Marvell Armada-8K PCIe controller"
 	depends on ARCH_MVEBU || COMPILE_TEST

drivers/pci/controller/dwc/Makefile

@@ -12,6 +12,7 @@ obj-$(CONFIG_PCI_KEYSTONE) += pci-keystone.o
 obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o
 obj-$(CONFIG_PCI_LAYERSCAPE_EP) += pci-layerscape-ep.o
 obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o
+obj-$(CONFIG_PCIE_QCOM_EP) += pcie-qcom-ep.o
 obj-$(CONFIG_PCIE_ARMADA_8K) += pcie-armada8k.o
 obj-$(CONFIG_PCIE_ARTPEC6) += pcie-artpec6.o
 obj-$(CONFIG_PCIE_ROCKCHIP_DW_HOST) += pcie-dw-rockchip.o

drivers/pci/controller/dwc/pcie-designware-ep.c

@@ -486,6 +486,7 @@ int dw_pcie_ep_raise_legacy_irq(struct dw_pcie_ep *ep, u8 func_no)
 
 	return -EINVAL;
 }
+EXPORT_SYMBOL_GPL(dw_pcie_ep_raise_legacy_irq);
 
 int dw_pcie_ep_raise_msi_irq(struct dw_pcie_ep *ep, u8 func_no,
 			     u8 interrupt_num)
@@ -537,6 +538,7 @@ int dw_pcie_ep_raise_msi_irq(struct dw_pcie_ep *ep, u8 func_no,
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(dw_pcie_ep_raise_msi_irq);
 
 int dw_pcie_ep_raise_msix_irq_doorbell(struct dw_pcie_ep *ep, u8 func_no,
 				       u16 interrupt_num)

drivers/pci/controller/dwc/pcie-qcom.c

@@ -166,6 +166,9 @@ struct qcom_pcie_resources_2_7_0 {
 	struct regulator_bulk_data supplies[2];
 	struct reset_control *pci_reset;
 	struct clk *pipe_clk;
+	struct clk *pipe_clk_src;
+	struct clk *phy_pipe_clk;
+	struct clk *ref_clk_src;
 };
 
 union qcom_pcie_resources {
@@ -189,6 +192,11 @@ struct qcom_pcie_ops {
 	int (*config_sid)(struct qcom_pcie *pcie);
 };
 
+struct qcom_pcie_cfg {
+	const struct qcom_pcie_ops *ops;
+	unsigned int pipe_clk_need_muxing:1;
+};
+
 struct qcom_pcie {
 	struct dw_pcie *pci;
 	void __iomem *parf;			/* DT parf */
@@ -197,6 +205,7 @@ struct qcom_pcie {
 	struct phy *phy;
 	struct gpio_desc *reset;
 	const struct qcom_pcie_ops *ops;
+	unsigned int pipe_clk_need_muxing:1;
 };
 
 #define to_qcom_pcie(x)		dev_get_drvdata((x)->dev)
@@ -1167,6 +1176,20 @@ static int qcom_pcie_get_resources_2_7_0(struct qcom_pcie *pcie)
 	if (ret < 0)
 		return ret;
 
+	if (pcie->pipe_clk_need_muxing) {
+		res->pipe_clk_src = devm_clk_get(dev, "pipe_mux");
+		if (IS_ERR(res->pipe_clk_src))
+			return PTR_ERR(res->pipe_clk_src);
+
+		res->phy_pipe_clk = devm_clk_get(dev, "phy_pipe");
+		if (IS_ERR(res->phy_pipe_clk))
+			return PTR_ERR(res->phy_pipe_clk);
+
+		res->ref_clk_src = devm_clk_get(dev, "ref");
+		if (IS_ERR(res->ref_clk_src))
+			return PTR_ERR(res->ref_clk_src);
+	}
+
 	res->pipe_clk = devm_clk_get(dev, "pipe");
 	return PTR_ERR_OR_ZERO(res->pipe_clk);
 }
@@ -1185,6 +1208,10 @@ static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie)
 		return ret;
 	}
 
+	/* Set TCXO as clock source for pcie_pipe_clk_src */
+	if (pcie->pipe_clk_need_muxing)
+		clk_set_parent(res->pipe_clk_src, res->ref_clk_src);
+
 	ret = clk_bulk_prepare_enable(res->num_clks, res->clks);
 	if (ret < 0)
 		goto err_disable_regulators;
@@ -1256,6 +1283,10 @@ static int qcom_pcie_post_init_2_7_0(struct qcom_pcie *pcie)
 {
 	struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0;
 
+	/* Set pipe clock as clock source for pcie_pipe_clk_src */
+	if (pcie->pipe_clk_need_muxing)
+		clk_set_parent(res->pipe_clk_src, res->phy_pipe_clk);
+
 	return clk_prepare_enable(res->pipe_clk);
 }
 
@@ -1456,6 +1487,39 @@ static const struct qcom_pcie_ops ops_1_9_0 = {
 	.config_sid = qcom_pcie_config_sid_sm8250,
 };
 
+static const struct qcom_pcie_cfg apq8084_cfg = {
+	.ops = &ops_1_0_0,
+};
+
+static const struct qcom_pcie_cfg ipq8064_cfg = {
+	.ops = &ops_2_1_0,
+};
+
+static const struct qcom_pcie_cfg msm8996_cfg = {
+	.ops = &ops_2_3_2,
+};
+
+static const struct qcom_pcie_cfg ipq8074_cfg = {
+	.ops = &ops_2_3_3,
+};
+
+static const struct qcom_pcie_cfg ipq4019_cfg = {
+	.ops = &ops_2_4_0,
+};
+
+static const struct qcom_pcie_cfg sdm845_cfg = {
+	.ops = &ops_2_7_0,
+};
+
+static const struct qcom_pcie_cfg sm8250_cfg = {
+	.ops = &ops_1_9_0,
+};
+
+static const struct qcom_pcie_cfg sc7280_cfg = {
+	.ops = &ops_1_9_0,
+	.pipe_clk_need_muxing = true,
+};
+
 static const struct dw_pcie_ops dw_pcie_ops = {
 	.link_up = qcom_pcie_link_up,
 	.start_link = qcom_pcie_start_link,
@@ -1467,6 +1531,7 @@ static int qcom_pcie_probe(struct platform_device *pdev)
 	struct pcie_port *pp;
 	struct dw_pcie *pci;
 	struct qcom_pcie *pcie;
+	const struct qcom_pcie_cfg *pcie_cfg;
 	int ret;
 
 	pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
@@ -1488,7 +1553,14 @@ static int qcom_pcie_probe(struct platform_device *pdev)
 
 	pcie->pci = pci;
 
-	pcie->ops = of_device_get_match_data(dev);
+	pcie_cfg = of_device_get_match_data(dev);
+	if (!pcie_cfg || !pcie_cfg->ops) {
+		dev_err(dev, "Invalid platform data\n");
+		return -EINVAL;
+	}
+
+	pcie->ops = pcie_cfg->ops;
+	pcie->pipe_clk_need_muxing = pcie_cfg->pipe_clk_need_muxing;
 
 	pcie->reset = devm_gpiod_get_optional(dev, "perst", GPIOD_OUT_HIGH);
 	if (IS_ERR(pcie->reset)) {
@@ -1545,16 +1617,18 @@ static int qcom_pcie_probe(struct platform_device *pdev)
 }
 
 static const struct of_device_id qcom_pcie_match[] = {
-	{ .compatible = "qcom,pcie-apq8084", .data = &ops_1_0_0 },
-	{ .compatible = "qcom,pcie-ipq8064", .data = &ops_2_1_0 },
-	{ .compatible = "qcom,pcie-ipq8064-v2", .data = &ops_2_1_0 },
-	{ .compatible = "qcom,pcie-apq8064", .data = &ops_2_1_0 },
-	{ .compatible = "qcom,pcie-msm8996", .data = &ops_2_3_2 },
-	{ .compatible = "qcom,pcie-ipq8074", .data = &ops_2_3_3 },
-	{ .compatible = "qcom,pcie-ipq4019", .data = &ops_2_4_0 },
-	{ .compatible = "qcom,pcie-qcs404", .data = &ops_2_4_0 },
-	{ .compatible = "qcom,pcie-sdm845", .data = &ops_2_7_0 },
-	{ .compatible = "qcom,pcie-sm8250", .data = &ops_1_9_0 },
+	{ .compatible = "qcom,pcie-apq8084", .data = &apq8084_cfg },
+	{ .compatible = "qcom,pcie-ipq8064", .data = &ipq8064_cfg },
+	{ .compatible = "qcom,pcie-ipq8064-v2", .data = &ipq8064_cfg },
+	{ .compatible = "qcom,pcie-apq8064", .data = &ipq8064_cfg },
+	{ .compatible = "qcom,pcie-msm8996", .data = &msm8996_cfg },
+	{ .compatible = "qcom,pcie-ipq8074", .data = &ipq8074_cfg },
+	{ .compatible = "qcom,pcie-ipq4019", .data = &ipq4019_cfg },
+	{ .compatible = "qcom,pcie-qcs404", .data = &ipq4019_cfg },
+	{ .compatible = "qcom,pcie-sdm845", .data = &sdm845_cfg },
+	{ .compatible = "qcom,pcie-sm8250", .data = &sm8250_cfg },
+	{ .compatible = "qcom,pcie-sc8180x", .data = &sm8250_cfg },
+	{ .compatible = "qcom,pcie-sc7280", .data = &sc7280_cfg },
 	{ }
 };