Merge tag 'i2c-for-6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
 "RPM fix for qcom-cci, platform module alias for xiic, build warning
  fix for mlxbf, typo fixes in comments"

* tag 'i2c-for-6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: mlxbf: depend on ACPI; clean away ifdeffage
  i2c: fix spelling typos in comments
  i2c: qcom-cci: Fix ordering of pm_runtime_xx and i2c_add_adapter
  i2c: xiic: Add platform module alias

drivers/i2c/busses/Kconfig

@@ -764,6 +764,7 @@ config I2C_LPC2K
 config I2C_MLXBF
         tristate "Mellanox BlueField I2C controller"
         depends on MELLANOX_PLATFORM && ARM64
+	depends on ACPI
 	select I2C_SLAVE
         help
           Enabling this option will add I2C SMBus support for Mellanox BlueField

drivers/i2c/busses/i2c-mlxbf.c

@@ -2247,7 +2247,6 @@ static struct i2c_adapter_quirks mlxbf_i2c_quirks = {
 	.max_write_len = MLXBF_I2C_MASTER_DATA_W_LENGTH,
 };
 
-#ifdef CONFIG_ACPI
 static const struct acpi_device_id mlxbf_i2c_acpi_ids[] = {
 	{ "MLNXBF03", (kernel_ulong_t)&mlxbf_i2c_chip[MLXBF_I2C_CHIP_TYPE_1] },
 	{ "MLNXBF23", (kernel_ulong_t)&mlxbf_i2c_chip[MLXBF_I2C_CHIP_TYPE_2] },
@@ -2282,12 +2281,6 @@ static int mlxbf_i2c_acpi_probe(struct device *dev, struct mlxbf_i2c_priv *priv)
 
 	return 0;
 }
-#else
-static int mlxbf_i2c_acpi_probe(struct device *dev, struct mlxbf_i2c_priv *priv)
-{
-	return -ENOENT;
-}
-#endif /* CONFIG_ACPI */
 
 static int mlxbf_i2c_probe(struct platform_device *pdev)
 {
@@ -2490,9 +2483,7 @@ static struct platform_driver mlxbf_i2c_driver = {
 	.remove = mlxbf_i2c_remove,
 	.driver = {
 		.name = "i2c-mlxbf",
-#ifdef CONFIG_ACPI
 		.acpi_match_table = ACPI_PTR(mlxbf_i2c_acpi_ids),
-#endif /* CONFIG_ACPI  */
 	},
 };
 

drivers/i2c/busses/i2c-mlxcpld.c

@@ -40,7 +40,7 @@
 #define MLXCPLD_LPCI2C_STATUS_REG	0x9
 #define MLXCPLD_LPCI2C_DATA_REG		0xa
 
-/* LPC I2C masks and parametres */
+/* LPC I2C masks and parameters */
 #define MLXCPLD_LPCI2C_RST_SEL_MASK	0x1
 #define MLXCPLD_LPCI2C_TRANS_END	0x1
 #define MLXCPLD_LPCI2C_STATUS_NACK	0x10

drivers/i2c/busses/i2c-qcom-cci.c

@@ -639,6 +639,11 @@ static int cci_probe(struct platform_device *pdev)
 	if (ret < 0)
 		goto error;
 
+	pm_runtime_set_autosuspend_delay(dev, MSEC_PER_SEC);
+	pm_runtime_use_autosuspend(dev);
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+
 	for (i = 0; i < cci->data->num_masters; i++) {
 		if (!cci->master[i].cci)
 			continue;
@@ -650,14 +655,12 @@ static int cci_probe(struct platform_device *pdev)
 		}
 	}
 
-	pm_runtime_set_autosuspend_delay(dev, MSEC_PER_SEC);
-	pm_runtime_use_autosuspend(dev);
-	pm_runtime_set_active(dev);
-	pm_runtime_enable(dev);
-
 	return 0;
 
 error_i2c:
+	pm_runtime_disable(dev);
+	pm_runtime_dont_use_autosuspend(dev);
+
 	for (--i ; i >= 0; i--) {
 		if (cci->master[i].cci) {
 			i2c_del_adapter(&cci->master[i].adap);

drivers/i2c/busses/i2c-sis630.c

@@ -97,7 +97,7 @@ MODULE_PARM_DESC(high_clock,
 module_param(force, bool, 0);
 MODULE_PARM_DESC(force, "Forcibly enable the SIS630. DANGEROUS!");
 
-/* SMBus base adress */
+/* SMBus base address */
 static unsigned short smbus_base;
 
 /* supported chips */

drivers/i2c/busses/i2c-xiic.c

@@ -920,6 +920,7 @@ static struct platform_driver xiic_i2c_driver = {
 
 module_platform_driver(xiic_i2c_driver);
 
+MODULE_ALIAS("platform:" DRIVER_NAME);
 MODULE_AUTHOR("info@mocean-labs.com");
 MODULE_DESCRIPTION("Xilinx I2C bus driver");
 MODULE_LICENSE("GPL v2");