Merge bk://linux.bkbits.net/linux-2.5

into hostme.bitkeeper.com:/repos/c/cifs/linux-2.5cifs

arch/ppc64/kernel/smp.c

@@ -390,8 +390,7 @@ static inline int __devinit smp_startup_cpu(unsigned int lcpu)
 	}
 
 	/* Fixup atomic count: it exited inside IRQ handler. */
-	((struct task_struct *)paca[lcpu].xCurrent)->thread_info->preempt_count
-		= 0;
+	paca[lcpu].xCurrent->thread_info->preempt_count	= 0;
 	/* Fixup SLB round-robin so next segment (kernel) goes in segment 0 */
 	paca[lcpu].xStab_data.next_round_robin = 0;
 
@@ -817,7 +816,7 @@ static void __init smp_create_idle(unsigned int cpu)
 	init_idle(p, cpu);
 	unhash_process(p);
 
-	paca[cpu].xCurrent = (u64)p;
+	paca[cpu].xCurrent = p;
 	current_set[cpu] = p->thread_info;
 }
 
@@ -869,7 +868,7 @@ void __devinit smp_prepare_boot_cpu(void)
 	/* cpu_possible is set up in prom.c */
 	cpu_set(boot_cpuid, cpu_online_map);
 
-	paca[boot_cpuid].xCurrent = (u64)current;
+	paca[boot_cpuid].xCurrent = current;
 	current_set[boot_cpuid] = current->thread_info;
 }
 

arch/ppc64/kernel/traps.c

@@ -466,6 +466,18 @@ SingleStepException(struct pt_regs *regs)
 	_exception(SIGTRAP, &info, regs);	
 }
 
+/*
+ * After we have successfully emulated an instruction, we have to
+ * check if the instruction was being single-stepped, and if so,
+ * pretend we got a single-step exception.  This was pointed out
+ * by Kumar Gala.  -- paulus
+ */
+static inline void emulate_single_step(struct pt_regs *regs)
+{
+	if (regs->msr & MSR_SE)
+		SingleStepException(regs);
+}
+
 static void dummy_perf(struct pt_regs *regs)
 {
 }
@@ -487,10 +499,8 @@ AlignmentException(struct pt_regs *regs)
 	fixed = fix_alignment(regs);
 
 	if (fixed == 1) {
-		if (!user_mode(regs))
-			PPCDBG(PPCDBG_ALIGNFIXUP, "fix alignment at %lx\n",
-			       regs->nip);
 		regs->nip += 4;	/* skip over emulated instruction */
+		emulate_single_step(regs);
 		return;
 	}
 

drivers/usb/core/devio.c

@@ -719,7 +719,7 @@ static int proc_connectinfo(struct dev_state *ps, void __user *arg)
 
 static int proc_resetdevice(struct dev_state *ps)
 {
-	return usb_reset_device(ps->dev);
+	return __usb_reset_device(ps->dev);
 
 }
 

drivers/usb/media/Kconfig

@@ -108,7 +108,7 @@ config USB_OV511
 
 config USB_PWC
 	tristate "USB Philips Cameras"
-	depends on USB && VIDEO_DEV && BROKEN
+	depends on USB && VIDEO_DEV
 	---help---
 	  Say Y or M here if you want to use one of these Philips & OEM
           webcams:

drivers/usb/media/pwc-if.c

@@ -129,7 +129,6 @@ static struct {
 
 static int pwc_video_open(struct inode *inode, struct file *file);
 static int pwc_video_close(struct inode *inode, struct file *file);
-static int pwc_video_release(struct video_device *);			  
 static ssize_t pwc_video_read(struct file *file, char *buf,
 			  size_t count, loff_t *ppos);
 static unsigned int pwc_video_poll(struct file *file, poll_table *wait);
@@ -1121,12 +1120,6 @@ static int pwc_video_close(struct inode *inode, struct file *file)
 	return 0;
 }
 
-static int pwc_video_release(struct video_device *vfd)
-{
-	Trace(TRACE_OPEN, "pwc_video_release() called. Now what?\n");
-}
-		
-
 /*
  *	FIXME: what about two parallel reads ????
  *      ANSWER: Not supported. You can't open the device more than once,
@@ -1855,7 +1848,7 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id
 		}
 	}
 
-	pdev->vdev.release = pwc_video_release;
+	pdev->vdev.release = video_device_release;
 	i = video_register_device(&pdev->vdev, VFL_TYPE_GRABBER, video_nr);
 	if (i < 0) {
 		Err("Failed to register as video device (%d).\n", i);

drivers/usb/serial/cyberjack.c

@@ -109,7 +109,7 @@ struct cyberjack_private {
 	short		rdtodo;		/* Bytes still to read */
 	unsigned char	wrbuf[5*64];	/* Buffer for collecting data to write */
 	short		wrfilled;	/* Overall data size we already got */
-	short		wrsent;		/* Data akready sent */
+	short		wrsent;		/* Data already sent */
 };
 
 /* do some startup allocations not currently performed by usb_serial_probe() */
@@ -159,8 +159,6 @@ static int  cyberjack_open (struct usb_serial_port *port, struct file *filp)
 
 	dbg("%s - usb_clear_halt", __FUNCTION__ );
 	usb_clear_halt(port->serial->dev, port->write_urb->pipe);
-	usb_clear_halt(port->serial->dev, port->read_urb->pipe);
-	usb_clear_halt(port->serial->dev, port->interrupt_in_urb->pipe);
 
 	/* force low_latency on so that our tty_push actually forces
 	 * the data through, otherwise it is scheduled, and with high
@@ -212,7 +210,6 @@ static int cyberjack_write (struct usb_serial_port *port, int from_user, const u
 	unsigned long flags;
 	int result;
 	int wrexpected;
-	unsigned char localbuf[CYBERJACK_LOCAL_BUF_SIZE];	/* Buffer for collecting data to write */
 
 	dbg("%s - port %d", __FUNCTION__, port->number);
 	dbg("%s - from_user %d", __FUNCTION__, from_user);
@@ -229,29 +226,23 @@ static int cyberjack_write (struct usb_serial_port *port, int from_user, const u
 
 	spin_lock_irqsave(&priv->lock, flags);
 
-	if( (count+priv->wrfilled)>sizeof(priv->wrbuf) ||
-		(count>sizeof(localbuf)) ) {
-		/* To much data  for buffer. Reset buffer. */
+	if( (count+priv->wrfilled)>sizeof(priv->wrbuf) ) {
+		/* To much data for buffer. Reset buffer. */
 		priv->wrfilled=0;
 		spin_unlock_irqrestore(&priv->lock, flags);
 		return (0);
 	}
 
-	spin_unlock_irqrestore(&priv->lock, flags);
-
 	/* Copy data */
 	if (from_user) {
-		if (copy_from_user(localbuf, buf, count)) {
+		if (copy_from_user(priv->wrbuf+priv->wrfilled, buf, count)) {
+			spin_unlock_irqrestore(&priv->lock, flags);
 			return -EFAULT;
 		}
 	} else {
-		memcpy (localbuf, buf, count);
+		memcpy (priv->wrbuf+priv->wrfilled, buf, count);
 	}  
 
-	spin_lock_irqsave(&priv->lock, flags);
-
-	memcpy (priv->wrbuf+priv->wrfilled, localbuf, count);
-
 	usb_serial_debug_data (__FILE__, __FUNCTION__, count,
 		priv->wrbuf+priv->wrfilled);
 	priv->wrfilled += count;

include/asm-ppc64/current.h

@@ -8,13 +8,11 @@
  * modify it under the terms of the GNU General Public License
  * as published by the Free Software Foundation; either version
  * 2 of the License, or (at your option) any later version.
- *
- * Use r13 for current since the ppc64 ABI reserves it - Anton
  */
 
 #include <asm/thread_info.h>
 
-#define get_current()   ((struct task_struct *)(get_paca()->xCurrent))
+#define get_current()   (get_paca()->xCurrent)
 #define current         get_current()
 
 #endif /* !(_PPC64_CURRENT_H) */

include/asm-ppc64/paca.h

@@ -37,6 +37,8 @@ extern struct paca_struct paca[];
 register struct paca_struct *local_paca asm("r13");
 #define get_paca()	local_paca
 
+struct task_struct;
+
 /*============================================================================
  * Name_______:	paca
  *
@@ -59,7 +61,7 @@ struct paca_struct {
  */
 	struct ItLpPaca *xLpPacaPtr;	/* Pointer to LpPaca for PLIC		0x00 */
 	struct ItLpRegSave *xLpRegSavePtr; /* Pointer to LpRegSave for PLIC	0x08 */
-	u64 xCurrent;  		        /* Pointer to current			0x10 */
+	struct task_struct *xCurrent;	/* Pointer to current			0x10 */
 	/* Note: the spinlock functions in arch/ppc64/lib/locks.c load lock_token and
 	   xPacaIndex with a single lwz instruction, using the constant offset 24.
 	   If you move either field, fix the spinlocks and rwlocks. */

include/linux/netfilter_arp.h

@@ -17,5 +17,4 @@
 #define NF_ARP_FORWARD	2
 #define NF_ARP_NUMHOOKS	3
 
-static DECLARE_MUTEX(arpt_mutex);
 #endif /* __LINUX_ARP_NETFILTER_H */

include/linux/tcp.h

@@ -183,6 +183,9 @@ struct tcp_info
 	__u32	tcpi_snd_cwnd;
 	__u32	tcpi_advmss;
 	__u32	tcpi_reordering;
+
+	__u32	tcpi_rcv_rtt;
+	__u32	tcpi_rcv_space;
 };
 
 #ifdef __KERNEL__
@@ -351,11 +354,11 @@ struct tcp_opt {
 	__u8	urg_mode;	/* In urgent mode		*/
 	__u32	snd_up;		/* Urgent pointer		*/
 
-	/* The syn_wait_lock is necessary only to avoid tcp_get_info having
+	/* The syn_wait_lock is necessary only to avoid proc interface having
 	 * to grab the main lock sock while browsing the listening hash
 	 * (otherwise it's deadlock prone).
-	 * This lock is acquired in read mode only from tcp_get_info() and
-	 * it's acquired in write mode _only_ from code that is actively
+	 * This lock is acquired in read mode only from listening_get_next()
+	 * and it's acquired in write mode _only_ from code that is actively
 	 * changing the syn_wait_queue. All readers that are holding
 	 * the master sock lock don't need to grab this lock in read mode
 	 * too as the syn_wait_queue writes are always protected from

include/linux/usb.h

@@ -334,6 +334,7 @@ extern void usb_put_dev(struct usb_device *dev);
 
 /* mostly for devices emulating SCSI over USB */
 extern int usb_reset_device(struct usb_device *dev);
+extern int __usb_reset_device(struct usb_device *dev);
 
 extern struct usb_device *usb_find_device(u16 vendor_id, u16 product_id);
 

net/ipv4/netfilter/arp_tables.c

@@ -62,6 +62,8 @@ do {								\
 #include <linux/netfilter_ipv4/lockhelp.h>
 #include <linux/netfilter_ipv4/listhelp.h>
 
+static DECLARE_MUTEX(arpt_mutex);
+
 struct arpt_table_info {
 	unsigned int size;
 	unsigned int number;

net/ipv4/tcp_diag.c

@@ -91,6 +91,9 @@ void tcp_get_info(struct sock *sk, struct tcp_info *info)
 	info->tcpi_snd_cwnd = tp->snd_cwnd;
 	info->tcpi_advmss = tp->advmss;
 	info->tcpi_reordering = tp->reordering;
+
+	info->tcpi_rcv_rtt = ((1000000*tp->rcv_rtt_est.rtt)/HZ)>>3;
+	info->tcpi_rcv_space = tp->rcvq_space.space;
 }
 
 static int tcpdiag_fill(struct sk_buff *skb, struct sock *sk,