Commit ce0a3956 authored by Bruce Losure's avatar Bruce Losure Committed by Tony Luck

[IA64-SGI] Altix patch to add bricktype knowledge to tiocx

Here is a patch to enable the SGI tiocx bus driver to distingush between
FPGA-attached h/w and non-FPGA-attached h/w.
Signed-off-by: default avatarBruce Losure <blosure@sgi.com>
Signed-off-by: default avatarTony Luck <tony.luck@intel.com>
parent ae40aae9
......@@ -21,6 +21,8 @@
#include <asm/sn/types.h>
#include <asm/sn/shubio.h>
#include <asm/sn/tiocx.h>
#include <asm/sn/l1.h>
#include <asm/sn/module.h>
#include "tio.h"
#include "xtalk/xwidgetdev.h"
#include "xtalk/hubdev.h"
......@@ -308,14 +310,12 @@ void tiocx_irq_free(struct sn_irq_info *sn_irq_info)
}
}
uint64_t
tiocx_dma_addr(uint64_t addr)
uint64_t tiocx_dma_addr(uint64_t addr)
{
return PHYS_TO_TIODMA(addr);
}
uint64_t
tiocx_swin_base(int nasid)
uint64_t tiocx_swin_base(int nasid)
{
return TIO_SWIN_BASE(nasid, TIOCX_CORELET);
}
......@@ -366,7 +366,29 @@ static void tio_corelet_reset(nasid_t nasid, int corelet)
udelay(2000);
}
static int fpga_attached(nasid_t nasid)
static int tiocx_btchar_get(int nasid)
{
moduleid_t module_id;
geoid_t geoid;
int cnodeid;
cnodeid = nasid_to_cnodeid(nasid);
geoid = cnodeid_get_geoid(cnodeid);
module_id = geo_module(geoid);
return MODULE_GET_BTCHAR(module_id);
}
static int is_fpga_brick(int nasid)
{
switch (tiocx_btchar_get(nasid)) {
case L1_BRICKTYPE_SA:
case L1_BRICKTYPE_ATHENA:
return 1;
}
return 0;
}
static int bitstream_loaded(nasid_t nasid)
{
uint64_t cx_credits;
......@@ -383,7 +405,7 @@ static int tiocx_reload(struct cx_dev *cx_dev)
int mfg_num = CX_DEV_NONE;
nasid_t nasid = cx_dev->cx_id.nasid;
if (fpga_attached(nasid)) {
if (bitstream_loaded(nasid)) {
uint64_t cx_id;
cx_id =
......@@ -414,9 +436,10 @@ static ssize_t show_cxdev_control(struct device *dev, char *buf)
{
struct cx_dev *cx_dev = to_cx_dev(dev);
return sprintf(buf, "0x%x 0x%x 0x%x\n",
return sprintf(buf, "0x%x 0x%x 0x%x %d\n",
cx_dev->cx_id.nasid,
cx_dev->cx_id.part_num, cx_dev->cx_id.mfg_num);
cx_dev->cx_id.part_num, cx_dev->cx_id.mfg_num,
tiocx_btchar_get(cx_dev->cx_id.nasid));
}
static ssize_t store_cxdev_control(struct device *dev, const char *buf,
......@@ -462,7 +485,7 @@ static int __init tiocx_init(void)
if ((nasid = cnodeid_to_nasid(cnodeid)) < 0)
break; /* No more nasids .. bail out of loop */
if (nasid & 0x1) { /* TIO's are always odd */
if ((nasid & 0x1) && is_fpga_brick(nasid)) {
struct hubdev_info *hubdev;
struct xwidget_info *widgetp;
......
......@@ -29,8 +29,9 @@
#define L1_BRICKTYPE_CHI_CG 0x76 /* v */
#define L1_BRICKTYPE_X 0x78 /* x */
#define L1_BRICKTYPE_X2 0x79 /* y */
#define L1_BRICKTYPE_SA 0x5e /* ^ */ /* TIO bringup brick */
#define L1_BRICKTYPE_SA 0x5e /* ^ */
#define L1_BRICKTYPE_PA 0x6a /* j */
#define L1_BRICKTYPE_IA 0x6b /* k */
#define L1_BRICKTYPE_ATHENA 0x2b /* + */
#endif /* _ASM_IA64_SN_L1_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment