Merge branch 'axienet-coding-style' into main

Radhey Shyam Pandey says:

====================
net: axienet: Fix coding style issues

This patchset replace all occurences of (1<<x) by BIT(x) to get rid
of checkpatch.pl "CHECK" output "Prefer using the BIT macro".

It also removes unnecessary ftrace-like logging, add missing blank line
after declaration and remove unnecessary parentheses around 'ndev->mtu
<= XAE_JUMBO_MTU' and 'ndev->mtu > XAE_MTU'.

Changes for v2:
- Split each coding style change into separate patch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/xilinx/xilinx_axienet.h

@@ -29,26 +29,26 @@
 /* Configuration options */
 
 /* Accept all incoming packets. Default: disabled (cleared) */
-#define XAE_OPTION_PROMISC			(1 << 0)
+#define XAE_OPTION_PROMISC			BIT(0)
 
 /* Jumbo frame support for Tx & Rx. Default: disabled (cleared) */
-#define XAE_OPTION_JUMBO			(1 << 1)
+#define XAE_OPTION_JUMBO			BIT(1)
 
 /* VLAN Rx & Tx frame support. Default: disabled (cleared) */
-#define XAE_OPTION_VLAN				(1 << 2)
+#define XAE_OPTION_VLAN				BIT(2)
 
 /* Enable recognition of flow control frames on Rx. Default: enabled (set) */
-#define XAE_OPTION_FLOW_CONTROL			(1 << 4)
+#define XAE_OPTION_FLOW_CONTROL			BIT(4)
 
 /* Strip FCS and PAD from incoming frames. Note: PAD from VLAN frames is not
  * stripped. Default: disabled (set)
  */
-#define XAE_OPTION_FCS_STRIP			(1 << 5)
+#define XAE_OPTION_FCS_STRIP			BIT(5)
 
 /* Generate FCS field and add PAD automatically for outgoing frames.
  * Default: enabled (set)
  */
-#define XAE_OPTION_FCS_INSERT			(1 << 6)
+#define XAE_OPTION_FCS_INSERT			BIT(6)
 
 /* Enable Length/Type error checking for incoming frames. When this option is
  * set, the MAC will filter frames that have a mismatched type/length field
@@ -56,13 +56,13 @@
  * types of frames are encountered. When this option is cleared, the MAC will
  * allow these types of frames to be received. Default: enabled (set)
  */
-#define XAE_OPTION_LENTYPE_ERR			(1 << 7)
+#define XAE_OPTION_LENTYPE_ERR			BIT(7)
 
 /* Enable the transmitter. Default: enabled (set) */
-#define XAE_OPTION_TXEN				(1 << 11)
+#define XAE_OPTION_TXEN				BIT(11)
 
 /*  Enable the receiver. Default: enabled (set) */
-#define XAE_OPTION_RXEN				(1 << 12)
+#define XAE_OPTION_RXEN				BIT(12)
 
 /*  Default options set when device is initialized or reset */
 #define XAE_OPTION_DEFAULTS				   \
@@ -326,11 +326,11 @@
 #define XAE_MULTICAST_CAM_TABLE_NUM	4
 
 /* Axi Ethernet Synthesis features */
-#define XAE_FEATURE_PARTIAL_RX_CSUM	(1 << 0)
-#define XAE_FEATURE_PARTIAL_TX_CSUM	(1 << 1)
-#define XAE_FEATURE_FULL_RX_CSUM	(1 << 2)
-#define XAE_FEATURE_FULL_TX_CSUM	(1 << 3)
-#define XAE_FEATURE_DMA_64BIT		(1 << 4)
+#define XAE_FEATURE_PARTIAL_RX_CSUM	BIT(0)
+#define XAE_FEATURE_PARTIAL_TX_CSUM	BIT(1)
+#define XAE_FEATURE_FULL_RX_CSUM	BIT(2)
+#define XAE_FEATURE_FULL_TX_CSUM	BIT(3)
+#define XAE_FEATURE_DMA_64BIT		BIT(4)
 
 #define XAE_NO_CSUM_OFFLOAD		0
 

drivers/net/ethernet/xilinx/xilinx_axienet_main.c

@@ -415,6 +415,7 @@ static void axienet_set_mac_address(struct net_device *ndev,
 static int netdev_set_mac_address(struct net_device *ndev, void *p)
 {
 	struct sockaddr *addr = p;
+
 	axienet_set_mac_address(ndev, addr->sa_data);
 	return 0;
 }
@@ -613,8 +614,7 @@ static int axienet_device_reset(struct net_device *ndev)
 	lp->options |= XAE_OPTION_VLAN;
 	lp->options &= (~XAE_OPTION_JUMBO);
 
-	if ((ndev->mtu > XAE_MTU) &&
-	    (ndev->mtu <= XAE_JUMBO_MTU)) {
+	if (ndev->mtu > XAE_MTU && ndev->mtu <= XAE_JUMBO_MTU) {
 		lp->max_frm_size = ndev->mtu + VLAN_ETH_HLEN +
 					XAE_TRL_SIZE;
 
@@ -1514,8 +1514,6 @@ static int axienet_open(struct net_device *ndev)
 	int ret;
 	struct axienet_local *lp = netdev_priv(ndev);
 
-	dev_dbg(&ndev->dev, "%s\n", __func__);
-
 	/* When we do an Axi Ethernet reset, it resets the complete core
 	 * including the MDIO. MDIO must be disabled before resetting.
 	 * Hold MDIO bus lock to avoid MDIO accesses during the reset.
@@ -1576,8 +1574,6 @@ static int axienet_stop(struct net_device *ndev)
 	struct axienet_local *lp = netdev_priv(ndev);
 	int i;
 
-	dev_dbg(&ndev->dev, "axienet_close()\n");
-
 	if (!lp->use_dmaengine) {
 		napi_disable(&lp->napi_tx);
 		napi_disable(&lp->napi_rx);
@@ -1657,6 +1653,7 @@ static int axienet_change_mtu(struct net_device *ndev, int new_mtu)
 static void axienet_poll_controller(struct net_device *ndev)
 {
 	struct axienet_local *lp = netdev_priv(ndev);
+
 	disable_irq(lp->tx_irq);
 	disable_irq(lp->rx_irq);
 	axienet_rx_irq(lp->tx_irq, ndev);