arm64: dts: qcom: Prep sc7180-trogdor trackpad IRQ for new boards

The trackpad interrupt got renamed and also moved to a new GPIO on
newer boards.  Let's do the move in the "trogdor.dtsi" file and then
undo it in the two old boards.

NOTE: since none of the new boards have device trees yet, this change
looks silly on its own but it will make sense after more boards are
supported.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210301133318.v2.3.Iddf6dc8102aa4fbc3847936226fc7bf2e2cd315c@changeidSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi

@@ -58,8 +58,22 @@ ap_ts: touchscreen@10 {
 	};
 };
 
+&trackpad {
+	interrupts = <58 IRQ_TYPE_EDGE_FALLING>;
+};
+
 /* PINCTRL - modifications to sc7180-trogdor.dtsi */
 
+&trackpad_int_1v8_odl {
+	pinmux {
+		pins = "gpio58";
+	};
+
+	pinconf {
+		pins = "gpio58";
+	};
+};
+
 &ts_reset_l {
 	pinconf {
 		/* This pin is not connected on -rev0, pull up to park. */

arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts

@@ -68,6 +68,22 @@ &sdhc_2 {
 	status = "okay";
 };
 
+&trackpad {
+	interrupts = <58 IRQ_TYPE_EDGE_FALLING>;
+};
+
+/* PINCTRL - modifications to sc7180-trogdor.dtsi */
+
+&trackpad_int_1v8_odl {
+	pinmux {
+		pins = "gpio58";
+	};
+
+	pinconf {
+		pins = "gpio58";
+	};
+};
+
 /* PINCTRL - board-specific pinctrl */
 
 &tlmm {

arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi

@@ -644,14 +644,14 @@ ap_tp_i2c: &i2c7 {
 	status = "okay";
 	clock-frequency = <400000>;
 
-	trackpad@15 {
+	trackpad: trackpad@15 {
 		compatible = "elan,ekth3000";
 		reg = <0x15>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&trackpad_int_1v8_odl>;
+		pinctrl-0 = <&tp_int_odl>;
 
 		interrupt-parent = <&tlmm>;
-		interrupts = <58 IRQ_TYPE_EDGE_FALLING>;
+		interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
 
 		vcc-supply = <&pp3300_fp_tp>;
 
@@ -1412,14 +1412,16 @@ pinconf-rx {
 		};
 	};
 
-	trackpad_int_1v8_odl: trackpad-int-1v8-odl {
+	/* Named trackpad_int_1v8_odl on earlier revision schematics */
+	trackpad_int_1v8_odl:
+	tp_int_odl: tp-int-odl {
 		pinmux {
-			pins = "gpio58";
+			pins = "gpio0";
 			function = "gpio";
 		};
 
 		pinconf {
-			pins = "gpio58";
+			pins = "gpio0";
 
 			/* Has external pullup */
 			bias-disable;