Commit ce3ba0c9 authored by Huang, Xiong's avatar Huang, Xiong Committed by David S. Miller

atl1c: remove PHY contrl in atl1c_reset_pcie

atl1c_reset_phy follows atl1c_reset_pcie in the whole driver,
so, it's unnecessary to add PHY control code in atl1c_reset_pcie.
Signed-off-by: default avatarxiong <xiong@qca.qualcomm.com>
Tested-by: default avatarLiu David <dwliu@qca.qualcomm.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 929a5e93
......@@ -165,11 +165,6 @@ static void atl1c_reset_pcie(struct atl1c_hw *hw, u32 flag)
atl1c_pcie_patch(hw);
if (flag & ATL1C_PCIE_L0S_L1_DISABLE)
atl1c_disable_l0s_l1(hw);
if (flag & ATL1C_PCIE_PHY_RESET)
AT_WRITE_REG(hw, REG_GPHY_CTRL, GPHY_CTRL_DEFAULT);
else
AT_WRITE_REG(hw, REG_GPHY_CTRL,
GPHY_CTRL_DEFAULT | GPHY_CTRL_EXT_RESET);
msleep(5);
}
......@@ -2409,8 +2404,7 @@ static int atl1c_resume(struct device *dev)
struct atl1c_adapter *adapter = netdev_priv(netdev);
AT_WRITE_REG(&adapter->hw, REG_WOL_CTRL, 0);
atl1c_reset_pcie(&adapter->hw, ATL1C_PCIE_L0S_L1_DISABLE |
ATL1C_PCIE_PHY_RESET);
atl1c_reset_pcie(&adapter->hw, ATL1C_PCIE_L0S_L1_DISABLE);
atl1c_phy_reset(&adapter->hw);
atl1c_reset_mac(&adapter->hw);
......@@ -2568,8 +2562,7 @@ static int __devinit atl1c_probe(struct pci_dev *pdev,
dev_err(&pdev->dev, "net device private data init failed\n");
goto err_sw_init;
}
atl1c_reset_pcie(&adapter->hw, ATL1C_PCIE_L0S_L1_DISABLE |
ATL1C_PCIE_PHY_RESET);
atl1c_reset_pcie(&adapter->hw, ATL1C_PCIE_L0S_L1_DISABLE);
/* Init GPHY as early as possible due to power saving issue */
atl1c_phy_reset(&adapter->hw);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment