ARM: S5PV310: Change to using s3c_gpio_cfgpin_range()

This patch changes the code setting ranges of GPIO pins in mach-s5pv310 using
s3c_gpio_cfgpin() to use the recently introduced s3c_gpio_cfgpin_range().
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

arch/arm/mach-s5pv310/setup-i2c0.c

@@ -21,8 +21,7 @@ struct platform_device; /* don't need the contents */
 
 void s3c_i2c0_cfg_gpio(struct platform_device *dev)
 {
-	s3c_gpio_cfgpin(S5PV310_GPD1(0), S3C_GPIO_SFN(2));
+	s3c_gpio_cfgpin_range(S5PV310_GPD1(0), 2, S3C_GPIO_SFN(2));
 	s3c_gpio_setpull(S5PV310_GPD1(0), S3C_GPIO_PULL_UP);
-	s3c_gpio_cfgpin(S5PV310_GPD1(1), S3C_GPIO_SFN(2));
 	s3c_gpio_setpull(S5PV310_GPD1(1), S3C_GPIO_PULL_UP);
 }

arch/arm/mach-s5pv310/setup-i2c1.c

@@ -18,8 +18,7 @@ struct platform_device; /* don't need the contents */
 
 void s3c_i2c1_cfg_gpio(struct platform_device *dev)
 {
-	s3c_gpio_cfgpin(S5PV310_GPD1(2), S3C_GPIO_SFN(2));
+	s3c_gpio_cfgpin_range(S5PV310_GPD1(2), 2, S3C_GPIO_SFN(2));
 	s3c_gpio_setpull(S5PV310_GPD1(2), S3C_GPIO_PULL_UP);
-	s3c_gpio_cfgpin(S5PV310_GPD1(3), S3C_GPIO_SFN(2));
 	s3c_gpio_setpull(S5PV310_GPD1(3), S3C_GPIO_PULL_UP);
 }

arch/arm/mach-s5pv310/setup-i2c2.c

@@ -18,8 +18,7 @@ struct platform_device; /* don't need the contents */
 
 void s3c_i2c2_cfg_gpio(struct platform_device *dev)
 {
-	s3c_gpio_cfgpin(S5PV310_GPA0(6), S3C_GPIO_SFN(3));
+	s3c_gpio_cfgpin_range(S5PV310_GPA0(6), 2, S3C_GPIO_SFN(3));
 	s3c_gpio_setpull(S5PV310_GPA0(6), S3C_GPIO_PULL_UP);
-	s3c_gpio_cfgpin(S5PV310_GPA0(7), S3C_GPIO_SFN(3));
 	s3c_gpio_setpull(S5PV310_GPA0(7), S3C_GPIO_PULL_UP);
 }