Commit cee22a15 authored by Viresh Kumar's avatar Viresh Kumar Committed by Tejun Heo

workqueues: Introduce new flag WQ_POWER_EFFICIENT for power oriented workqueues

Workqueues can be performance or power-oriented. Currently, most workqueues are
bound to the CPU they were created on. This gives good performance (due to cache
effects) at the cost of potentially waking up otherwise idle cores (Idle from
scheduler's perspective. Which may or may not be physically idle) just to
process some work. To save power, we can allow the work to be rescheduled on a
core that is already awake.

Workqueues created with the WQ_UNBOUND flag will allow some power savings.
However, we don't change the default behaviour of the system.  To enable
power-saving behaviour, a new config option CONFIG_WQ_POWER_EFFICIENT needs to
be turned on. This option can also be overridden by the
workqueue.power_efficient boot parameter.

tj: Updated config description and comments.  Renamed
    CONFIG_WQ_POWER_EFFICIENT to CONFIG_WQ_POWER_EFFICIENT_DEFAULT.
Signed-off-by: default avatarViresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: default avatarAmit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: default avatarTejun Heo <tj@kernel.org>
parent f722406f
......@@ -3320,6 +3320,21 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
that this also can be controlled per-workqueue for
workqueues visible under /sys/bus/workqueue/.
workqueue.power_efficient
Per-cpu workqueues are generally preferred because
they show better performance thanks to cache
locality; unfortunately, per-cpu workqueues tend to
be more power hungry than unbound workqueues.
Enabling this makes the per-cpu workqueues which
were observed to contribute significantly to power
consumption unbound, leading to measurably lower
power usage at the cost of small performance
overhead.
The default value of this parameter is determined by
the config option CONFIG_WQ_POWER_EFFICIENT_DEFAULT.
x2apic_phys [X86-64,APIC] Use x2apic physical mode instead of
default x2apic cluster mode on platforms
supporting x2apic.
......
......@@ -303,6 +303,33 @@ enum {
WQ_CPU_INTENSIVE = 1 << 5, /* cpu instensive workqueue */
WQ_SYSFS = 1 << 6, /* visible in sysfs, see wq_sysfs_register() */
/*
* Per-cpu workqueues are generally preferred because they tend to
* show better performance thanks to cache locality. Per-cpu
* workqueues exclude the scheduler from choosing the CPU to
* execute the worker threads, which has an unfortunate side effect
* of increasing power consumption.
*
* The scheduler considers a CPU idle if it doesn't have any task
* to execute and tries to keep idle cores idle to conserve power;
* however, for example, a per-cpu work item scheduled from an
* interrupt handler on an idle CPU will force the scheduler to
* excute the work item on that CPU breaking the idleness, which in
* turn may lead to more scheduling choices which are sub-optimal
* in terms of power consumption.
*
* Workqueues marked with WQ_POWER_EFFICIENT are per-cpu by default
* but become unbound if workqueue.power_efficient kernel param is
* specified. Per-cpu workqueues which are identified to
* contribute significantly to power-consumption are identified and
* marked with this flag and enabling the power_efficient mode
* leads to noticeable power saving at the cost of small
* performance disadvantage.
*
* http://thread.gmane.org/gmane.linux.kernel/1480396
*/
WQ_POWER_EFFICIENT = 1 << 7,
__WQ_DRAINING = 1 << 16, /* internal: workqueue is draining */
__WQ_ORDERED = 1 << 17, /* internal: workqueue is ordered */
......
......@@ -263,6 +263,26 @@ config PM_GENERIC_DOMAINS
bool
depends on PM
config WQ_POWER_EFFICIENT_DEFAULT
bool "Enable workqueue power-efficient mode by default"
depends on PM
default n
help
Per-cpu workqueues are generally preferred because they show
better performance thanks to cache locality; unfortunately,
per-cpu workqueues tend to be more power hungry than unbound
workqueues.
Enabling workqueue.power_efficient kernel parameter makes the
per-cpu workqueues which were observed to contribute
significantly to power consumption unbound, leading to measurably
lower power usage at the cost of small performance overhead.
This config option determines whether workqueue.power_efficient
is enabled by default.
If in doubt, say N.
config PM_GENERIC_DOMAINS_SLEEP
def_bool y
depends on PM_SLEEP && PM_GENERIC_DOMAINS
......
......@@ -272,6 +272,15 @@ static cpumask_var_t *wq_numa_possible_cpumask;
static bool wq_disable_numa;
module_param_named(disable_numa, wq_disable_numa, bool, 0444);
/* see the comment above the definition of WQ_POWER_EFFICIENT */
#ifdef CONFIG_WQ_POWER_EFFICIENT_DEFAULT
static bool wq_power_efficient = true;
#else
static bool wq_power_efficient;
#endif
module_param_named(power_efficient, wq_power_efficient, bool, 0444);
static bool wq_numa_enabled; /* unbound NUMA affinity enabled */
/* buf for wq_update_unbound_numa_attrs(), protected by CPU hotplug exclusion */
......@@ -4085,6 +4094,10 @@ struct workqueue_struct *__alloc_workqueue_key(const char *fmt,
struct workqueue_struct *wq;
struct pool_workqueue *pwq;
/* see the comment above the definition of WQ_POWER_EFFICIENT */
if ((flags & WQ_POWER_EFFICIENT) && wq_power_efficient)
flags |= WQ_UNBOUND;
/* allocate wq and format name */
if (flags & WQ_UNBOUND)
tbl_size = wq_numa_tbl_len * sizeof(wq->numa_pwq_tbl[0]);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment