mt76: fix tx power issues

- tx power is stored in the channels after ieee80211_register_hw, so
  chan->orig_mpwr needs to be updated as well
- for non-TSSI devices, mt76x2e needs to use a different target power value
  from the EEPROM
- fix a rounding error in a few places (need to round up, not down)
Signed-off-by: Felix Fietkau <nbd@nbd.name>

drivers/net/wireless/mediatek/mt76/mac80211.c

@@ -745,7 +745,7 @@ int mt76_get_txpower(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 	struct mt76_dev *dev = hw->priv;
 	int n_chains = hweight8(dev->antenna_mask);
 
-	*dbm = dev->txpower_cur / 2;
+	*dbm = DIV_ROUND_UP(dev->txpower_cur, 2);
 
 	/* convert from per-chain power to combined
 	 * output on 2x2 devices

drivers/net/wireless/mediatek/mt76/mt7603/init.c

@@ -488,6 +488,7 @@ mt7603_init_txpower(struct mt7603_dev *dev,
 	for (i = 0; i < sband->n_channels; i++) {
 		chan = &sband->channels[i];
 		chan->max_power = target_power;
+		chan->orig_mpwr = target_power;
 	}
 }
 

drivers/net/wireless/mediatek/mt76/mt76x0/init.c

@@ -280,6 +280,7 @@ mt76x0_init_txpower(struct mt76x02_dev *dev,
 		mt76x0_get_power_info(dev, chan, &tp);
 
 		chan->max_power = (mt76x02_get_max_rate_power(&t) + tp) / 2;
+		chan->orig_mpwr = chan->max_power;
 	}
 }
 

drivers/net/wireless/mediatek/mt76/mt76x2/init.c

@@ -165,27 +165,21 @@ void mt76x2_init_txpower(struct mt76x02_dev *dev,
 	struct ieee80211_channel *chan;
 	struct mt76x2_tx_power_info txp;
 	struct mt76_rate_power t = {};
-	int target_power;
 	int i;
 
 	for (i = 0; i < sband->n_channels; i++) {
 		chan = &sband->channels[i];
 
 		mt76x2_get_power_info(dev, &txp, chan);
-
-		target_power = max_t(int, (txp.chain[0].target_power +
-					   txp.chain[0].delta),
-					  (txp.chain[1].target_power +
-					   txp.chain[1].delta));
-
 		mt76x2_get_rate_power(dev, &t, chan);
 
 		chan->max_power = mt76x02_get_max_rate_power(&t) +
-				  target_power;
-		chan->max_power /= 2;
+				  txp.target_power;
+		chan->max_power = DIV_ROUND_UP(chan->max_power, 2);
 
 		/* convert to combined output power on 2x2 devices */
 		chan->max_power += 3;
+		chan->orig_mpwr = chan->max_power;
 	}
 }
 EXPORT_SYMBOL_GPL(mt76x2_init_txpower);

drivers/net/wireless/mediatek/mt76/mt76x2/phy.c

@@ -161,12 +161,12 @@ void mt76x2_phy_set_txpower(struct mt76x02_dev *dev)
 		delta = txp.delta_bw80;
 
 	mt76x2_get_rate_power(dev, &t, chan);
-	mt76x02_add_rate_power_offset(&t, txp.chain[0].target_power);
+	mt76x02_add_rate_power_offset(&t, txp.target_power + delta);
 	mt76x02_limit_rate_power(&t, dev->mt76.txpower_conf);
 	dev->mt76.txpower_cur = mt76x02_get_max_rate_power(&t);
 
 	base_power = mt76x2_get_min_rate_power(&t);
-	delta += base_power - txp.chain[0].target_power;
+	delta = base_power - txp.target_power;
 	txp_0 = txp.chain[0].target_power + txp.chain[0].delta + delta;
 	txp_1 = txp.chain[1].target_power + txp.chain[1].delta + delta;
 
@@ -182,7 +182,7 @@ void mt76x2_phy_set_txpower(struct mt76x02_dev *dev)
 	}
 
 	mt76x02_add_rate_power_offset(&t, -base_power);
-	dev->target_power = txp.chain[0].target_power;
+	dev->target_power = txp.target_power;
 	dev->target_power_delta[0] = txp_0 - txp.chain[0].target_power;
 	dev->target_power_delta[1] = txp_1 - txp.chain[0].target_power;
 	dev->mt76.rate_power = t;