phy: exynos-mipi-video: Use consistent method to address phy registers

Exynos4 MIPI phy registers are defined with macro calculating the offset
for given phyN.  Use the same method for Exynos5420 to be consistent.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

drivers/phy/phy-exynos-mipi-video.c

@@ -110,46 +110,46 @@ static const struct mipi_phy_device_desc exynos5420_mipi_phy = {
 			/* EXYNOS_MIPI_PHY_ID_CSIS0 */
 			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_DSIM0,
 			.enable_val = EXYNOS5_PHY_ENABLE,
-			.enable_reg = EXYNOS5420_MIPI_PHY0_CONTROL,
+			.enable_reg = EXYNOS5420_MIPI_PHY_CONTROL(0),
 			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
 			.resetn_val = EXYNOS5_MIPI_PHY_S_RESETN,
-			.resetn_reg = EXYNOS5420_MIPI_PHY0_CONTROL,
+			.resetn_reg = EXYNOS5420_MIPI_PHY_CONTROL(0),
 			.resetn_map = EXYNOS_MIPI_REGMAP_PMU,
 		}, {
 			/* EXYNOS_MIPI_PHY_ID_DSIM0 */
 			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_CSIS0,
 			.enable_val = EXYNOS5_PHY_ENABLE,
-			.enable_reg = EXYNOS5420_MIPI_PHY0_CONTROL,
+			.enable_reg = EXYNOS5420_MIPI_PHY_CONTROL(0),
 			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
 			.resetn_val = EXYNOS5_MIPI_PHY_M_RESETN,
-			.resetn_reg = EXYNOS5420_MIPI_PHY0_CONTROL,
+			.resetn_reg = EXYNOS5420_MIPI_PHY_CONTROL(0),
 			.resetn_map = EXYNOS_MIPI_REGMAP_PMU,
 		}, {
 			/* EXYNOS_MIPI_PHY_ID_CSIS1 */
 			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_DSIM1,
 			.enable_val = EXYNOS5_PHY_ENABLE,
-			.enable_reg = EXYNOS5420_MIPI_PHY1_CONTROL,
+			.enable_reg = EXYNOS5420_MIPI_PHY_CONTROL(1),
 			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
 			.resetn_val = EXYNOS5_MIPI_PHY_S_RESETN,
-			.resetn_reg = EXYNOS5420_MIPI_PHY1_CONTROL,
+			.resetn_reg = EXYNOS5420_MIPI_PHY_CONTROL(1),
 			.resetn_map = EXYNOS_MIPI_REGMAP_PMU,
 		}, {
 			/* EXYNOS_MIPI_PHY_ID_DSIM1 */
 			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_CSIS1,
 			.enable_val = EXYNOS5_PHY_ENABLE,
-			.enable_reg = EXYNOS5420_MIPI_PHY1_CONTROL,
+			.enable_reg = EXYNOS5420_MIPI_PHY_CONTROL(1),
 			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
 			.resetn_val = EXYNOS5_MIPI_PHY_M_RESETN,
-			.resetn_reg = EXYNOS5420_MIPI_PHY1_CONTROL,
+			.resetn_reg = EXYNOS5420_MIPI_PHY_CONTROL(1),
 			.resetn_map = EXYNOS_MIPI_REGMAP_PMU,
 		}, {
 			/* EXYNOS_MIPI_PHY_ID_CSIS2 */
 			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_NONE,
 			.enable_val = EXYNOS5_PHY_ENABLE,
-			.enable_reg = EXYNOS5420_MIPI_PHY2_CONTROL,
+			.enable_reg = EXYNOS5420_MIPI_PHY_CONTROL(2),
 			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
 			.resetn_val = EXYNOS5_MIPI_PHY_S_RESETN,
-			.resetn_reg = EXYNOS5420_MIPI_PHY2_CONTROL,
+			.resetn_reg = EXYNOS5420_MIPI_PHY_CONTROL(2),
 			.resetn_map = EXYNOS_MIPI_REGMAP_PMU,
 		},
 	},

include/linux/soc/samsung/exynos-regs-pmu.h

@@ -505,9 +505,7 @@
 	((EXYNOS5420_KFC_CORE_RESET0 | EXYNOS5420_KFC_ETM_RESET0) << (_nr))
 
 #define EXYNOS5420_USBDRD1_PHY_CONTROL				0x0708
-#define EXYNOS5420_MIPI_PHY0_CONTROL				0x0714
-#define EXYNOS5420_MIPI_PHY1_CONTROL				0x0718
-#define EXYNOS5420_MIPI_PHY2_CONTROL				0x071C
+#define EXYNOS5420_MIPI_PHY_CONTROL(n)				(0x0714 + (n) * 4)
 #define EXYNOS5420_DPTX_PHY_CONTROL				0x0728
 #define EXYNOS5420_ARM_CORE2_SYS_PWR_REG			0x1020
 #define EXYNOS5420_DIS_IRQ_ARM_CORE2_LOCAL_SYS_PWR_REG		0x1024