Commit cf40a310 authored by Rene Herman's avatar Rene Herman Committed by Jaroslav Kysela

[ALSA] AdLib FM card driver

Attached you'll find an ALSA driver for AdLib FM cards. An AdLib card is
just an OPL2, which was already supported by sound/drivers/opl3, so only
very minimal bus-glue is needed. The patch applies cleanly to both
2.6.16 and 2.6.16-mm1.

The driver has been tested with an actual ancient 8-bit ISA AdLib card
and works fine. It also works fine for an OPL3 {,emulation} as still
found on many ISA soundcards but given that AdLib cards don't have their
own mixer, upping the volume from 0 might be a problem without the card
driver already loaded and driving the OPL3.
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
parent 060d77b9
......@@ -120,6 +120,34 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
enable - enable card
- Default: enabled, for PCI and ISA PnP cards
Module snd-adlib
----------------
Module for AdLib FM cards.
port - port # for OPL chip
This module supports multiple cards. It does not support autoprobe, so
the port must be specified. For actual AdLib FM cards it will be 0x388.
Note that this card does not have PCM support and no mixer; only FM
synthesis.
Make sure you have "sbiload" from the alsa-tools package available and,
after loading the module, find out the assigned ALSA sequencer port
number through "sbiload -l". Example output:
Port Client name Port name
64:0 OPL2 FM synth OPL2 FM Port
Load the std.sb and drums.sb patches also supplied by sbiload:
sbiload -p 64:0 std.sb drums.sb
If you use this driver to drive an OPL3, you can use std.o3 and drums.o3
instead. To have the card produce sound, use aplaymidi from alsa-utils:
aplaymidi -p 64:0 foo.mid
Module snd-ad1816a
------------------
......
......@@ -11,6 +11,15 @@ config SND_CS4231_LIB
tristate
select SND_PCM
config SND_ADLIB
tristate "AdLib FM card"
select SND_OPL3_LIB
help
Say Y here to include support for AdLib FM cards.
To compile this driver as a module, choose M here: the module
will be called snd-adlib.
config SND_AD1816A
tristate "Analog Devices SoundPort AD1816A"
depends on SND && PNP && ISA
......
......@@ -3,6 +3,7 @@
# Copyright (c) 2001 by Jaroslav Kysela <perex@suse.cz>
#
snd-adlib-objs := adlib.o
snd-als100-objs := als100.o
snd-azt2320-objs := azt2320.o
snd-cmi8330-objs := cmi8330.o
......@@ -13,6 +14,7 @@ snd-sgalaxy-objs := sgalaxy.o
snd-sscape-objs := sscape.o
# Toplevel Module Dependency
obj-$(CONFIG_SND_ADLIB) += snd-adlib.o
obj-$(CONFIG_SND_ALS100) += snd-als100.o
obj-$(CONFIG_SND_AZT2320) += snd-azt2320.o
obj-$(CONFIG_SND_CMI8330) += snd-cmi8330.o
......
/*
* AdLib FM card driver.
*/
#include <sound/driver.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <sound/core.h>
#include <sound/initval.h>
#include <sound/opl3.h>
#define CRD_NAME "AdLib FM"
#define DRV_NAME "snd_adlib"
MODULE_DESCRIPTION(CRD_NAME);
MODULE_AUTHOR("Rene Herman");
MODULE_LICENSE("GPL");
static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;
static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;
static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE;
static long port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT;
module_param_array(index, int, NULL, 0444);
MODULE_PARM_DESC(index, "Index value for " CRD_NAME " soundcard.");
module_param_array(id, charp, NULL, 0444);
MODULE_PARM_DESC(id, "ID string for " CRD_NAME " soundcard.");
module_param_array(enable, bool, NULL, 0444);
MODULE_PARM_DESC(enable, "Enable " CRD_NAME " soundcard.");
module_param_array(port, long, NULL, 0444);
MODULE_PARM_DESC(port, "Port # for " CRD_NAME " driver.");
static struct platform_device *devices[SNDRV_CARDS];
static void snd_adlib_free(struct snd_card *card)
{
release_and_free_resource(card->private_data);
}
static int __devinit snd_adlib_probe(struct platform_device *device)
{
struct snd_card *card;
struct snd_opl3 *opl3;
int error;
int i = device->id;
if (port[i] == SNDRV_AUTO_PORT) {
snd_printk(KERN_ERR DRV_NAME ": please specify port\n");
error = -EINVAL;
goto out0;
}
card = snd_card_new(index[i], id[i], THIS_MODULE, 0);
if (!card) {
snd_printk(KERN_ERR DRV_NAME ": could not create card\n");
error = -EINVAL;
goto out0;
}
card->private_data = request_region(port[i], 4, CRD_NAME);
if (!card->private_data) {
snd_printk(KERN_ERR DRV_NAME ": could not grab ports\n");
error = -EBUSY;
goto out1;
}
card->private_free = snd_adlib_free;
error = snd_opl3_create(card, port[i], port[i] + 2, OPL3_HW_AUTO, 1, &opl3);
if (error < 0) {
snd_printk(KERN_ERR DRV_NAME ": could not create OPL\n");
goto out1;
}
error = snd_opl3_hwdep_new(opl3, 0, 0, NULL);
if (error < 0) {
snd_printk(KERN_ERR DRV_NAME ": could not create FM\n");
goto out1;
}
strcpy(card->driver, DRV_NAME);
strcpy(card->shortname, CRD_NAME);
sprintf(card->longname, CRD_NAME " at %#lx", port[i]);
snd_card_set_dev(card, &device->dev);
error = snd_card_register(card);
if (error < 0) {
snd_printk(KERN_ERR DRV_NAME ": could not register card\n");
goto out1;
}
platform_set_drvdata(device, card);
return 0;
out1: snd_card_free(card);
out0: error = -EINVAL; /* FIXME: should be the original error code */
return error;
}
static int __devexit snd_adlib_remove(struct platform_device *device)
{
snd_card_free(platform_get_drvdata(device));
platform_set_drvdata(device, NULL);
return 0;
}
static struct platform_driver snd_adlib_driver = {
.probe = snd_adlib_probe,
.remove = __devexit_p(snd_adlib_remove),
.driver = {
.name = DRV_NAME
}
};
static int __init alsa_card_adlib_init(void)
{
int i, cards;
if (platform_driver_register(&snd_adlib_driver) < 0) {
snd_printk(KERN_ERR DRV_NAME ": could not register driver\n");
return -ENODEV;
}
for (cards = 0, i = 0; i < SNDRV_CARDS; i++) {
struct platform_device *device;
if (!enable[i])
continue;
device = platform_device_register_simple(DRV_NAME, i, NULL, 0);
if (IS_ERR(device))
continue;
devices[i] = device;
cards++;
}
if (!cards) {
#ifdef MODULE
printk(KERN_ERR CRD_NAME " soundcard not found or device busy\n");
#endif
platform_driver_unregister(&snd_adlib_driver);
return -ENODEV;
}
return 0;
}
static void __exit alsa_card_adlib_exit(void)
{
int i;
for (i = 0; i < SNDRV_CARDS; i++)
platform_device_unregister(devices[i]);
platform_driver_unregister(&snd_adlib_driver);
}
module_init(alsa_card_adlib_init);
module_exit(alsa_card_adlib_exit);
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment