Commit cf41a51d authored by David Daney's avatar David Daney Committed by David S. Miller

of/phylib: Use device tree properties to initialize Marvell PHYs.

Some aspects of PHY initialization are board dependent, things like
indicator LED connections and some clocking modes cannot be determined
by probing.  The dev_flags element of struct phy_device can be used to
control these things if an appropriate value can be passed from the
Ethernet driver.  We run into problems however if the PHY connections
are specified by the device tree.  There is no way for the Ethernet
driver to know what flags it should pass.

If we are using the device tree, the struct phy_device will be
populated with the device tree node corresponding to the PHY, and we
can extract extra configuration information from there.

The next question is what should the format of that information be?
It is highly device specific, and the device tree representation
should not be tied to any arbitrary kernel defined constants.  A
straight forward representation is just to specify the exact bits that
should be set using the "marvell,reg-init" property:

      phy5: ethernet-phy@5 {
        reg = <5>;
        compatible = "marvell,88e1149r";
        marvell,reg-init =
                /* led[0]:1000, led[1]:100, led[2]:10, led[3]:tx */
                <3 0x10 0 0x5777>, /* Reg 3,16 <- 0x5777 */
                /* mix %:0, led[0123]:drive low off hiZ */
                <3 0x11 0 0x00aa>, /* Reg 3,17 <- 0x00aa */
                /* default blink periods. */
                <3 0x12 0 0x4105>, /* Reg 3,18 <- 0x4105 */
                /* led[4]:rx, led[5]:dplx, led[45]:drive low off hiZ */
                <3 0x13 0 0x0a60>; /* Reg 3,19 <- 0x0a60 */
      };

      phy6: ethernet-phy@6 {
        reg = <6>;
        compatible = "marvell,88e1118";
        marvell,reg-init =
                /* Fix rx and tx clock transition timing */
                <2 0x15 0xffcf 0>, /* Reg 2,21 Clear bits 4, 5 */
                /* Adjust LED drive. */
                <3 0x11 0 0x442a>, /* Reg 3,17 <- 0442a */
                /* irq, blink-activity, blink-link */
                <3 0x10 0 0x0242>; /* Reg 3,16 <- 0x0242 */
      };

The Marvell PHYs have a page select register at register 22 (0x16), we
can specify any register by its page and register number.  These are
the first and second word.  The third word contains a mask to be ANDed
with the existing register value, and the fourth word is ORed with the
result to yield the new register value.  The new marvell_of_reg_init
function leaves the page select register unchanged, so a call to it
can be dropped into the .config_init functions without unduly
affecting the state of the PHY.

If CONFIG_OF_MDIO is not set, there is no of_node, or no
"marvell,reg-init" property, the PHY initialization is unchanged.
Signed-off-by: default avatarDavid Daney <ddaney@caviumnetworks.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Cyril Chemparathy <cyril@ti.com>
Cc: David Daney <ddaney@caviumnetworks.com>
Cc: Arnaud Patard <arnaud.patard@rtp-net.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: default avatarGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 90600732
......@@ -30,6 +30,7 @@
#include <linux/ethtool.h>
#include <linux/phy.h>
#include <linux/marvell_phy.h>
#include <linux/of.h>
#include <asm/io.h>
#include <asm/irq.h>
......@@ -187,6 +188,87 @@ static int marvell_config_aneg(struct phy_device *phydev)
return 0;
}
#ifdef CONFIG_OF_MDIO
/*
* Set and/or override some configuration registers based on the
* marvell,reg-init property stored in the of_node for the phydev.
*
* marvell,reg-init = <reg-page reg mask value>,...;
*
* There may be one or more sets of <reg-page reg mask value>:
*
* reg-page: which register bank to use.
* reg: the register.
* mask: if non-zero, ANDed with existing register value.
* value: ORed with the masked value and written to the regiser.
*
*/
static int marvell_of_reg_init(struct phy_device *phydev)
{
const __be32 *paddr;
int len, i, saved_page, current_page, page_changed, ret;
if (!phydev->dev.of_node)
return 0;
paddr = of_get_property(phydev->dev.of_node, "marvell,reg-init", &len);
if (!paddr || len < (4 * sizeof(*paddr)))
return 0;
saved_page = phy_read(phydev, MII_MARVELL_PHY_PAGE);
if (saved_page < 0)
return saved_page;
page_changed = 0;
current_page = saved_page;
ret = 0;
len /= sizeof(*paddr);
for (i = 0; i < len - 3; i += 4) {
u16 reg_page = be32_to_cpup(paddr + i);
u16 reg = be32_to_cpup(paddr + i + 1);
u16 mask = be32_to_cpup(paddr + i + 2);
u16 val_bits = be32_to_cpup(paddr + i + 3);
int val;
if (reg_page != current_page) {
current_page = reg_page;
page_changed = 1;
ret = phy_write(phydev, MII_MARVELL_PHY_PAGE, reg_page);
if (ret < 0)
goto err;
}
val = 0;
if (mask) {
val = phy_read(phydev, reg);
if (val < 0) {
ret = val;
goto err;
}
val &= mask;
}
val |= val_bits;
ret = phy_write(phydev, reg, val);
if (ret < 0)
goto err;
}
err:
if (page_changed) {
i = phy_write(phydev, MII_MARVELL_PHY_PAGE, saved_page);
if (ret == 0)
ret = i;
}
return ret;
}
#else
static int marvell_of_reg_init(struct phy_device *phydev)
{
return 0;
}
#endif /* CONFIG_OF_MDIO */
static int m88e1121_config_aneg(struct phy_device *phydev)
{
int err, oldpage, mscr;
......@@ -369,6 +451,9 @@ static int m88e1111_config_init(struct phy_device *phydev)
return err;
}
err = marvell_of_reg_init(phydev);
if (err < 0)
return err;
err = phy_write(phydev, MII_BMCR, BMCR_RESET);
if (err < 0)
......@@ -421,6 +506,10 @@ static int m88e1118_config_init(struct phy_device *phydev)
if (err < 0)
return err;
err = marvell_of_reg_init(phydev);
if (err < 0)
return err;
/* Reset address */
err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0);
if (err < 0)
......@@ -447,6 +536,10 @@ static int m88e1149_config_init(struct phy_device *phydev)
if (err < 0)
return err;
err = marvell_of_reg_init(phydev);
if (err < 0)
return err;
/* Reset address */
err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0);
if (err < 0)
......@@ -518,6 +611,10 @@ static int m88e1145_config_init(struct phy_device *phydev)
}
}
err = marvell_of_reg_init(phydev);
if (err < 0)
return err;
return 0;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment