Merge 4.3-rc7 into staging-next

We want the other staging patches in this branch as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

.mailmap

@@ -59,6 +59,7 @@ James Bottomley <jejb@mulgrave.(none)>
 James Bottomley <jejb@titanic.il.steeleye.com>
 James E Wilson <wilson@specifix.com>
 James Ketrenos <jketreno@io.(none)>
+<javier@osg.samsung.com> <javier.martinez@collabora.co.uk>
 Jean Tourrilhes <jt@hpl.hp.com>
 Jeff Garzik <jgarzik@pretzel.yyz.us>
 Jens Axboe <axboe@suse.de>

Documentation/arm/OMAP/README

+This file contains documentation for running mainline
+kernel on omaps.
+
+KERNEL		NEW DEPENDENCIES
+v4.3+		Update is needed for custom .config files to make sure
+		CONFIG_REGULATOR_PBIAS is enabled for MMC1 to work
+		properly.

MAINTAINERS

@@ -894,11 +894,12 @@ M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 
-ARM/Allwinner A1X SoC support
+ARM/Allwinner sunXi SoC support
 M:	Maxime Ripard <maxime.ripard@free-electrons.com>
+M:	Chen-Yu Tsai <wens@csie.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-N:	sun[x4567]i
+N:	sun[x456789]i
 
 ARM/Allwinner SoC Clock Support
 M:	Emilio López <emilio@elopez.com.ar>
@@ -3591,6 +3592,13 @@ F:	drivers/gpu/drm/i915/
 F:	include/drm/i915*
 F:	include/uapi/drm/i915*
 
+DRM DRIVERS FOR ATMEL HLCDC
+M:	Boris Brezillon <boris.brezillon@free-electrons.com>
+L:	dri-devel@lists.freedesktop.org
+S:	Supported
+F:	drivers/gpu/drm/atmel-hlcdc/
+F:	Documentation/devicetree/bindings/drm/atmel/
+
 DRM DRIVERS FOR EXYNOS
 M:	Inki Dae <inki.dae@samsung.com>
 M:	Joonyoung Shim <jy0922.shim@samsung.com>
@@ -3619,6 +3627,14 @@ S:	Maintained
 F:	drivers/gpu/drm/imx/
 F:	Documentation/devicetree/bindings/drm/imx/
 
+DRM DRIVERS FOR GMA500 (Poulsbo, Moorestown and derivative chipsets)
+M:	Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
+L:	dri-devel@lists.freedesktop.org
+T:	git git://github.com/patjak/drm-gma500
+S:	Maintained
+F:	drivers/gpu/drm/gma500
+F:	include/drm/gma500*
+
 DRM DRIVERS FOR NVIDIA TEGRA
 M:	Thierry Reding <thierry.reding@gmail.com>
 M:	Terje Bergström <tbergstrom@nvidia.com>
@@ -6784,7 +6800,6 @@ F:	drivers/scsi/megaraid/
 
 MELLANOX ETHERNET DRIVER (mlx4_en)
 M:	Amir Vadai <amirv@mellanox.com>
-M:	Ido Shamay <idos@mellanox.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 W:	http://www.mellanox.com
@@ -9114,6 +9129,15 @@ S: Supported
 F: Documentation/devicetree/bindings/net/snps,dwc-qos-ethernet.txt
 F: drivers/net/ethernet/synopsys/dwc_eth_qos.c
 
+SYNOPSYS DESIGNWARE I2C DRIVER
+M:	Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+M:	Jarkko Nikula <jarkko.nikula@linux.intel.com>
+M:	Mika Westerberg <mika.westerberg@linux.intel.com>
+L:	linux-i2c@vger.kernel.org
+S:	Maintained
+F:	drivers/i2c/busses/i2c-designware-*
+F:	include/linux/platform_data/i2c-designware.h
+
 SYNOPSYS DESIGNWARE MMC/SD/SDIO DRIVER
 M:	Seungwon Jeon <tgih.jun@samsung.com>
 M:	Jaehoon Chung <jh80.chung@samsung.com>
@@ -11666,6 +11690,7 @@ F:	drivers/tty/serial/zs.*
 ZSMALLOC COMPRESSED SLAB MEMORY ALLOCATOR
 M:	Minchan Kim <minchan@kernel.org>
 M:	Nitin Gupta <ngupta@vflare.org>
+R:	Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
 L:	linux-mm@kvack.org
 S:	Maintained
 F:	mm/zsmalloc.c

Makefile

 VERSION = 4
 PATCHLEVEL = 3
 SUBLEVEL = 0
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc7
 NAME = Blurry Fish Butt
 
 # *DOCUMENTATION*

arch/arm/boot/dts/am57xx-beagle-x15.dts

@@ -402,11 +402,12 @@ smps8_reg: smps8 {
 				/* SMPS9 unused */
 
 				ldo1_reg: ldo1 {
-					/* VDD_SD  */
+					/* VDD_SD / VDDSHV8  */
 					regulator-name = "ldo1";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <3300000>;
 					regulator-boot-on;
+					regulator-always-on;
 				};
 
 				ldo2_reg: ldo2 {

arch/arm/boot/dts/armada-385-db-ap.dts

@@ -46,7 +46,7 @@
 
 / {
 	model = "Marvell Armada 385 Access Point Development Board";
-	compatible = "marvell,a385-db-ap", "marvell,armada385", "marvell,armada38x";
+	compatible = "marvell,a385-db-ap", "marvell,armada385", "marvell,armada380";
 
 	chosen {
 		stdout-path = "serial1:115200n8";

arch/arm/boot/dts/berlin2q.dtsi

@@ -152,7 +152,7 @@ gic: interrupt-controller@ad1000 {
 		};
 
 		usb_phy2: phy@a2f400 {
-			compatible = "marvell,berlin2-usb-phy";
+			compatible = "marvell,berlin2cd-usb-phy";
 			reg = <0xa2f400 0x128>;
 			#phy-cells = <0>;
 			resets = <&chip_rst 0x104 14>;
@@ -170,7 +170,7 @@ usb2: usb@a30000 {
 		};
 
 		usb_phy0: phy@b74000 {
-			compatible = "marvell,berlin2-usb-phy";
+			compatible = "marvell,berlin2cd-usb-phy";
 			reg = <0xb74000 0x128>;
 			#phy-cells = <0>;
 			resets = <&chip_rst 0x104 12>;
@@ -178,7 +178,7 @@ usb_phy0: phy@b74000 {
 		};
 
 		usb_phy1: phy@b78000 {
-			compatible = "marvell,berlin2-usb-phy";
+			compatible = "marvell,berlin2cd-usb-phy";
 			reg = <0xb78000 0x128>;
 			#phy-cells = <0>;
 			resets = <&chip_rst 0x104 13>;

arch/arm/boot/dts/exynos5420-peach-pit.dts

@@ -915,6 +915,11 @@ pmic_selb: pmic-selb {
 	};
 };
 
+&pmu_system_controller {
+	assigned-clocks = <&pmu_system_controller 0>;
+	assigned-clock-parents = <&clock CLK_FIN_PLL>;
+};
+
 &rtc {
 	status = "okay";
 	clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>;

arch/arm/boot/dts/exynos5800-peach-pi.dts

@@ -878,6 +878,11 @@ pmic_selb: pmic-selb {
 	};
 };
 
+&pmu_system_controller {
+	assigned-clocks = <&pmu_system_controller 0>;
+	assigned-clock-parents = <&clock CLK_FIN_PLL>;
+};
+
 &rtc {
 	status = "okay";
 	clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>;

arch/arm/boot/dts/imx7d.dtsi

@@ -588,10 +588,10 @@ uart1: serial@30860000 {
 				status = "disabled";
 			};
 
-			uart2: serial@30870000 {
+			uart2: serial@30890000 {
 				compatible = "fsl,imx7d-uart",
 					     "fsl,imx6q-uart";
-				reg = <0x30870000 0x10000>;
+				reg = <0x30890000 0x10000>;
 				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX7D_UART2_ROOT_CLK>,
 					<&clks IMX7D_UART2_ROOT_CLK>;

arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts

@@ -12,7 +12,7 @@
 
 / {
 	model = "LogicPD Zoom DM3730 Torpedo Development Kit";
-	compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap36xx";
+	compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap3630", "ti,omap3";
 
 	gpio_keys {
 		compatible = "gpio-keys";

arch/arm/boot/dts/meson.dtsi

@@ -67,7 +67,7 @@ gic: interrupt-controller@c4301000 {
 
 	timer@c1109940 {
 		compatible = "amlogic,meson6-timer";
-		reg = <0xc1109940 0x14>;
+		reg = <0xc1109940 0x18>;
 		interrupts = <0 10 1>;
 	};
 
@@ -80,36 +80,37 @@ soc {
 		wdt: watchdog@c1109900 {
 			compatible = "amlogic,meson6-wdt";
 			reg = <0xc1109900 0x8>;
+			interrupts = <0 0 1>;
 		};
 
 		uart_AO: serial@c81004c0 {
 			compatible = "amlogic,meson-uart";
-			reg = <0xc81004c0 0x14>;
+			reg = <0xc81004c0 0x18>;
 			interrupts = <0 90 1>;
 			clocks = <&clk81>;
 			status = "disabled";
 		};
 
-		uart_A: serial@c81084c0 {
+		uart_A: serial@c11084c0 {
 			compatible = "amlogic,meson-uart";
-			reg = <0xc81084c0 0x14>;
-			interrupts = <0 90 1>;
+			reg = <0xc11084c0 0x18>;
+			interrupts = <0 26 1>;
 			clocks = <&clk81>;
 			status = "disabled";
 		};
 
-		uart_B: serial@c81084dc {
+		uart_B: serial@c11084dc {
 			compatible = "amlogic,meson-uart";
-			reg = <0xc81084dc 0x14>;
-			interrupts = <0 90 1>;
+			reg = <0xc11084dc 0x18>;
+			interrupts = <0 75 1>;
 			clocks = <&clk81>;
 			status = "disabled";
 		};
 
-		uart_C: serial@c8108700 {
+		uart_C: serial@c1108700 {
 			compatible = "amlogic,meson-uart";
-			reg = <0xc8108700 0x14>;
-			interrupts = <0 90 1>;
+			reg = <0xc1108700 0x18>;
+			interrupts = <0 93 1>;
 			clocks = <&clk81>;
 			status = "disabled";
 		};

arch/arm/boot/dts/omap3-evm-37xx.dts

@@ -13,7 +13,7 @@
 
 / {
 	model = "TI OMAP37XX EVM (TMDSEVM3730)";
-	compatible = "ti,omap3-evm-37xx", "ti,omap36xx";
+	compatible = "ti,omap3-evm-37xx", "ti,omap3630", "ti,omap3";
 
 	memory {
 		device_type = "memory";

arch/arm/boot/dts/ste-hrefv60plus.dtsi

@@ -56,7 +56,7 @@ default_hrefv60_cfg1 {
 					/* VMMCI level-shifter enable */
 					default_hrefv60_cfg2 {
 						pins = "GPIO169_D22";
-						ste,config = <&gpio_out_lo>;
+						ste,config = <&gpio_out_hi>;
 					};
 					/* VMMCI level-shifter voltage select */
 					default_hrefv60_cfg3 {

arch/arm/boot/dts/tegra114.dtsi

@@ -234,7 +234,9 @@ gpio: gpio@6000d000 {
 		gpio-controller;
 		#interrupt-cells = <2>;
 		interrupt-controller;
+		/*
 		gpio-ranges = <&pinmux 0 0 246>;
+		*/
 	};
 
 	apbmisc@70000800 {

arch/arm/boot/dts/tegra124.dtsi

@@ -258,7 +258,9 @@ gpio: gpio@0,6000d000 {
 		gpio-controller;
 		#interrupt-cells = <2>;
 		interrupt-controller;
+		/*
 		gpio-ranges = <&pinmux 0 0 251>;
+		*/
 	};
 
 	apbdma: dma@0,60020000 {

arch/arm/boot/dts/tegra20.dtsi

@@ -244,7 +244,9 @@ gpio: gpio@6000d000 {
 		gpio-controller;
 		#interrupt-cells = <2>;
 		interrupt-controller;
+		/*
 		gpio-ranges = <&pinmux 0 0 224>;
+		*/
 	};
 
 	apbmisc@70000800 {

arch/arm/boot/dts/tegra30.dtsi

@@ -349,7 +349,9 @@ gpio: gpio@6000d000 {
 		gpio-controller;
 		#interrupt-cells = <2>;
 		interrupt-controller;
+		/*
 		gpio-ranges = <&pinmux 0 0 248>;
+		*/
 	};
 
 	apbmisc@70000800 {

arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts

@@ -85,7 +85,7 @@ &support_card {
 };
 
 &ethsc {
-	interrupts = <0 50 4>;
+	interrupts = <0 52 4>;
 };
 
 &serial0 {

arch/arm/kvm/Kconfig

@@ -21,6 +21,7 @@ config KVM
 	depends on MMU && OF
 	select PREEMPT_NOTIFIERS
 	select ANON_INODES
+	select ARM_GIC
 	select HAVE_KVM_CPU_RELAX_INTERCEPT
 	select HAVE_KVM_ARCH_TLB_FLUSH_ALL
 	select KVM_MMIO