Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "This branch contains platform-related driver updates for ARM and
  ARM64, these are the areas that bring the changes:

  New drivers:

   - driver support for Renesas R-Car V3M (R8A77970)

   - power management support for Amlogic GX

   - a new driver for the Tegra BPMP thermal sensor

   - a new bus driver for Technologic Systems NBUS

  Changes for subsystems that prefer to merge through arm-soc:

   - the usual updates for reset controller drivers from Philipp Zabel,
     with five added drivers for SoCs in the arc, meson, socfpa,
     uniphier and mediatek families

   - updates to the ARM SCPI and PSCI frameworks, from Sudeep Holla,
     Heiner Kallweit and Lorenzo Pieralisi

  Changes specific to some ARM-based SoC

   - the Freescale/NXP DPAA QBMan drivers from PowerPC can now work on
     ARM as well

   - several changes for power management on Broadcom SoCs

   - various improvements on Qualcomm, Broadcom, Amlogic, Atmel,
     Mediatek

   - minor Cleanups for Samsung, TI OMAP SoCs"

[ NOTE! This doesn't work without the previous ARM SoC device-tree pull,
  because the R8A77970 driver is missing a header file that came from
  that pull.

  The fact that this got merged afterwards only fixes it at this point,
  and bisection of that driver will fail if/when you walk into the
  history of that driver.           - Linus ]

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (96 commits)
  soc: amlogic: meson-gx-pwrc-vpu: fix power-off when powered by bootloader
  bus: add driver for the Technologic Systems NBUS
  memory: omap-gpmc: Remove deprecated gpmc_update_nand_reg()
  soc: qcom: remove unused label
  soc: amlogic: gx pm domain: add PM and OF dependencies
  drivers/firmware: psci_checker: Add missing destroy_timer_on_stack()
  dt-bindings: power: add amlogic meson power domain bindings
  soc: amlogic: add Meson GX VPU Domains driver
  soc: qcom: Remote filesystem memory driver
  dt-binding: soc: qcom: Add binding for rmtfs memory
  of: reserved_mem: Accessor for acquiring reserved_mem
  of/platform: Generalize /reserved-memory handling
  soc: mediatek: pwrap: fix fatal compiler error
  soc: mediatek: pwrap: fix compiler errors
  arm64: mediatek: cleanup message for platform selection
  soc: Allow test-building of MediaTek drivers
  soc: mediatek: place Kconfig for all SoC drivers under menu
  soc: mediatek: pwrap: add support for MT7622 SoC
  soc: mediatek: pwrap: add common way for setup CS timing extenstion
  soc: mediatek: pwrap: add MediaTek MT6380 as one slave of pwrap
  ..

Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt

@@ -164,6 +164,8 @@ Control registers for this memory controller's DDR PHY.
 
 Required properties:
 - compatible     : should contain one of these
+	"brcm,brcmstb-ddr-phy-v71.1"
+	"brcm,brcmstb-ddr-phy-v72.0"
 	"brcm,brcmstb-ddr-phy-v225.1"
 	"brcm,brcmstb-ddr-phy-v240.1"
 	"brcm,brcmstb-ddr-phy-v240.2"
@@ -184,7 +186,9 @@ Sequencer DRAM parameters and control registers. Used for Self-Refresh
 Power-Down (SRPD), among other things.
 
 Required properties:
-- compatible     : should contain "brcm,brcmstb-memc-ddr"
+- compatible     : should contain one of these
+	"brcm,brcmstb-memc-ddr-rev-b.2.2"
+	"brcm,brcmstb-memc-ddr"
 - reg            : the MEMC DDR register range
 
 Example:

Documentation/devicetree/bindings/arm/samsung/pmu.txt

@@ -4,7 +4,6 @@ Properties:
  - compatible : should contain two values. First value must be one from following list:
 		   - "samsung,exynos3250-pmu" - for Exynos3250 SoC,
 		   - "samsung,exynos4210-pmu" - for Exynos4210 SoC,
-		   - "samsung,exynos4212-pmu" - for Exynos4212 SoC,
 		   - "samsung,exynos4412-pmu" - for Exynos4412 SoC,
 		   - "samsung,exynos5250-pmu" - for Exynos5250 SoC,
 		   - "samsung,exynos5260-pmu" - for Exynos5260 SoC.

Documentation/devicetree/bindings/firmware/qcom,scm.txt

@@ -18,6 +18,8 @@ Required properties:
  * Core, iface, and bus clocks required for "qcom,scm"
 - clock-names: Must contain "core" for the core clock, "iface" for the interface
   clock and "bus" for the bus clock per the requirements of the compatible.
+- qcom,dload-mode: phandle to the TCSR hardware block and offset of the
+		   download mode control register (optional)
 
 Example for MSM8916:
 

Documentation/devicetree/bindings/memory-controllers/brcm,dpfe-cpu.txt

+DDR PHY Front End (DPFE) for Broadcom STB
+=========================================
+
+DPFE and the DPFE firmware provide an interface for the host CPU to
+communicate with the DCPU, which resides inside the DDR PHY.
+
+There are three memory regions for interacting with the DCPU. These are
+specified in a single reg property.
+
+Required properties:
+  - compatible: must be "brcm,bcm7271-dpfe-cpu", "brcm,bcm7268-dpfe-cpu"
+    or "brcm,dpfe-cpu"
+  - reg: must reference three register ranges
+      - start address and length of the DCPU register space
+      - start address and length of the DCPU data memory space
+      - start address and length of the DCPU instruction memory space
+  - reg-names: must contain "dpfe-cpu", "dpfe-dmem", and "dpfe-imem";
+        they must be in the same order as the register declarations
+
+Example:
+	dpfe_cpu0: dpfe-cpu@f1132000 {
+		compatible = "brcm,bcm7271-dpfe-cpu", "brcm,dpfe-cpu";
+		reg =  <0xf1132000 0x180
+			0xf1134000 0x1000
+			0xf1138000 0x4000>;
+		reg-names = "dpfe-cpu", "dpfe-dmem", "dpfe-imem";
+	};

Documentation/devicetree/bindings/mips/brcm/soc.txt

@@ -11,3 +11,156 @@ Required properties:
 
 The experimental -viper variants are for running Linux on the 3384's
 BMIPS4355 cable modem CPU instead of the BMIPS5000 application processor.
+
+Power management
+----------------
+
+For power management (particularly, S2/S3/S5 system suspend), the following SoC
+components are needed:
+
+= Always-On control block (AON CTRL)
+
+This hardware provides control registers for the "always-on" (even in low-power
+modes) hardware, such as the Power Management State Machine (PMSM).
+
+Required properties:
+- compatible     : should be one of
+		   "brcm,bcm7425-aon-ctrl"
+		   "brcm,bcm7429-aon-ctrl"
+		   "brcm,bcm7435-aon-ctrl" and
+		   "brcm,brcmstb-aon-ctrl"
+- reg            : the register start and length for the AON CTRL block
+
+Example:
+
+syscon@410000 {
+	compatible = "brcm,bcm7425-aon-ctrl", "brcm,brcmstb-aon-ctrl";
+	reg = <0x410000 0x400>;
+};
+
+= Memory controllers
+
+A Broadcom STB SoC typically has a number of independent memory controllers,
+each of which may have several associated hardware blocks, which are versioned
+independently (control registers, DDR PHYs, etc.). One might consider
+describing these controllers as a parent "memory controllers" block, which
+contains N sub-nodes (one for each controller in the system), each of which is
+associated with a number of hardware register resources (e.g., its PHY.
+
+== MEMC (MEMory Controller)
+
+Represents a single memory controller instance.
+
+Required properties:
+- compatible     : should contain "brcm,brcmstb-memc" and "simple-bus"
+- ranges	 : should contain the child address in the parent address
+		   space, must be 0 here, and the register start and length of
+		   the entire memory controller (including all sub nodes: DDR PHY,
+		   arbiter, etc.)
+- #address-cells : must be 1
+- #size-cells	 : must be 1
+
+Example:
+
+	memory-controller@0 {
+		compatible = "brcm,brcmstb-memc", "simple-bus";
+		ranges = <0x0 0x0 0xa000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		memc-arb@1000 {
+			...
+		};
+
+		memc-ddr@2000 {
+			...
+		};
+
+		ddr-phy@6000 {
+			...
+		};
+	};
+
+Should contain subnodes for any of the following relevant hardware resources:
+
+== DDR PHY control
+
+Control registers for this memory controller's DDR PHY.
+
+Required properties:
+- compatible     : should contain one of these
+		   "brcm,brcmstb-ddr-phy-v64.5"
+		   "brcm,brcmstb-ddr-phy"
+
+- reg            : the DDR PHY register range and length
+
+Example:
+
+	ddr-phy@6000 {
+		compatible = "brcm,brcmstb-ddr-phy-v64.5";
+		reg = <0x6000 0xc8>;
+	};
+
+== DDR memory controller sequencer
+
+Control registers for this memory controller's DDR memory sequencer
+
+Required properties:
+- compatible     : should contain one of these
+		   "brcm,bcm7425-memc-ddr"
+		   "brcm,bcm7429-memc-ddr"
+		   "brcm,bcm7435-memc-ddr" and
+		   "brcm,brcmstb-memc-ddr"
+
+- reg            : the DDR sequencer register range and length
+
+Example:
+
+	memc-ddr@2000 {
+		compatible = "brcm,bcm7425-memc-ddr", "brcm,brcmstb-memc-ddr";
+		reg = <0x2000 0x300>;
+	};
+
+== MEMC Arbiter
+
+The memory controller arbiter is responsible for memory clients allocation
+(bandwidth, priorities etc.) and needs to have its contents restored during
+deep sleep states (S3).
+
+Required properties:
+
+- compatible	: should contain one of these
+		  "brcm,brcmstb-memc-arb-v10.0.0.0"
+		  "brcm,brcmstb-memc-arb"
+
+- reg		: the DDR Arbiter register range and length
+
+Example:
+
+	memc-arb@1000 {
+		compatible = "brcm,brcmstb-memc-arb-v10.0.0.0";
+		reg = <0x1000 0x248>;
+	};
+
+== Timers
+
+The Broadcom STB chips contain a timer block with several general purpose
+timers that can be used.
+
+Required properties:
+
+- compatible	: should contain one of:
+		  "brcm,bcm7425-timers"
+		  "brcm,bcm7429-timers"
+		  "brcm,bcm7435-timers and
+		  "brcm,brcmstb-timers"
+- reg		: the timers register range
+- interrupts	: the interrupt line for this timer block
+
+Example:
+
+	timers: timer@4067c0 {
+		compatible = "brcm,bcm7425-timers", "brcm,brcmstb-timers";
+		reg = <0x4067c0 0x40>;
+		interrupts = <&periph_intc 19>;
+	};

Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt

+Amlogic Meson Power Controller
+==============================
+
+The Amlogic Meson SoCs embeds an internal Power domain controller.
+
+VPU Power Domain
+----------------
+
+The Video Processing Unit power domain is controlled by this power controller,
+but the domain requires some external resources to meet the correct power
+sequences.
+The bindings must respect the power domain bindings as described in the file
+power_domain.txt
+
+Device Tree Bindings:
+---------------------
+
+Required properties:
+- compatible: should be "amlogic,meson-gx-pwrc-vpu" for the Meson GX SoCs
+- #power-domain-cells: should be 0
+- amlogic,hhi-sysctrl: phandle to the HHI sysctrl node
+- resets: phandles to the reset lines needed for this power demain sequence
+	as described in ../reset/reset.txt
+- clocks: from common clock binding: handle to VPU and VAPB clocks
+- clock-names: from common clock binding: must contain "vpu", "vapb"
+	corresponding to entry in the clocks property.
+
+Parent node should have the following properties :
+- compatible: "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd"
+- reg: base address and size of the AO system control register space.
+
+Example:
+-------
+
+ao_sysctrl: sys-ctrl@0 {
+	compatible = "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd";
+	reg =  <0x0 0x0 0x0 0x100>;
+
+	pwrc_vpu: power-controller-vpu {
+		compatible = "amlogic,meson-gx-pwrc-vpu";
+		#power-domain-cells = <0>;
+		amlogic,hhi-sysctrl = <&sysctrl>;
+		resets = <&reset RESET_VIU>,
+			 <&reset RESET_VENC>,
+			 <&reset RESET_VCBUS>,
+			 <&reset RESET_BT656>,
+			 <&reset RESET_DVIN_RESET>,
+			 <&reset RESET_RDMA>,
+			 <&reset RESET_VENCI>,
+			 <&reset RESET_VENCP>,
+			 <&reset RESET_VDAC>,
+			 <&reset RESET_VDI6>,
+			 <&reset RESET_VENCL>,
+			 <&reset RESET_VID_LOCK>;
+		clocks = <&clkc CLKID_VPU>,
+			 <&clkc CLKID_VAPB>;
+		clock-names = "vpu", "vapb";
+	};
+};
+
+

Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt

@@ -17,6 +17,7 @@ Required properties:
       - "renesas,r8a7794-sysc" (R-Car E2)
       - "renesas,r8a7795-sysc" (R-Car H3)
       - "renesas,r8a7796-sysc" (R-Car M3-W)
+      - "renesas,r8a77970-sysc" (R-Car V3M)
       - "renesas,r8a77995-sysc" (R-Car D3)
   - reg: Address start and address range for the device.
   - #power-domain-cells: Must be 1.

Documentation/devicetree/bindings/reserved-memory/qcom,rmtfs-mem.txt

+Qualcomm Remote File System Memory binding
+
+This binding describes the Qualcomm remote filesystem memory, which serves the
+purpose of describing the shared memory region used for remote processors to
+access block device data using the Remote Filesystem protocol.
+
+- compatible:
+	Usage: required
+	Value type: <stringlist>
+	Definition: must be:
+		    "qcom,rmtfs-mem"
+
+- reg:
+	Usage: required for static allocation
+	Value type: <prop-encoded-array>
+	Definition: must specify base address and size of the memory region,
+		    as described in reserved-memory.txt
+
+- size:
+	Usage: required for dynamic allocation
+	Value type: <prop-encoded-array>
+	Definition: must specify a size of the memory region, as described in
+		    reserved-memory.txt
+
+- qcom,client-id:
+	Usage: required
+	Value type: <u32>
+	Definition: identifier of the client to use this region for buffers.
+
+- qcom,vmid:
+	Usage: optional
+	Value type: <u32>
+	Definition: vmid of the remote processor, to set up memory protection.
+
+= EXAMPLE
+The following example shows the remote filesystem memory setup for APQ8016,
+with the rmtfs region for the Hexagon DSP (id #1) located at 0x86700000.
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rmtfs@86700000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0x86700000 0x0 0xe0000>;
+			no-map;
+
+			qcom,client-id = <1>;
+		};
+	};

Documentation/devicetree/bindings/reset/renesas,rst.txt

@@ -26,6 +26,7 @@ Required properties:
 		  - "renesas,r8a7794-rst" (R-Car E2)
 		  - "renesas,r8a7795-rst" (R-Car H3)
 		  - "renesas,r8a7796-rst" (R-Car M3-W)
+		  - "renesas,r8a77970-rst" (R-Car V3M)
 		  - "renesas,r8a77995-rst" (R-Car D3)
   - reg: Address start and address range for the device.
 

Documentation/devicetree/bindings/reset/snps,axs10x-reset.txt

+Binding for the AXS10x reset controller
+
+This binding describes the ARC AXS10x boards custom IP-block which allows
+to control reset signals of selected peripherals. For example DW GMAC, etc...
+This block is controlled via memory-mapped register (AKA CREG) which
+represents up-to 32 reset lines.
+
+As of today only the following lines are used:
+ - DW GMAC - line 5
+
+This binding uses the common reset binding[1].
+
+[1] Documentation/devicetree/bindings/reset/reset.txt
+
+Required properties:
+- compatible: should be "snps,axs10x-reset".
+- reg: should always contain pair address - length: for creg reset
+  bits register.
+- #reset-cells: from common reset binding; Should always be set to 1.
+
+Example:
+	reset: reset-controller@11220 {
+		compatible = "snps,axs10x-reset";
+		#reset-cells = <1>;
+		reg = <0x11220 0x4>;
+	};
+
+Specifying reset lines connected to IP modules:
+	ethernet@.... {
+		....
+		resets = <&reset 5>;
+		....
+	};

Documentation/devicetree/bindings/reset/uniphier-reset.txt

@@ -13,6 +13,7 @@ Required properties:
     "socionext,uniphier-pxs2-reset" - for PXs2/LD6b SoC
     "socionext,uniphier-ld11-reset" - for LD11 SoC
     "socionext,uniphier-ld20-reset" - for LD20 SoC
+    "socionext,uniphier-pxs3-reset" - for PXs3 SoC
 - #reset-cells: should be 1.
 
 Example:
@@ -44,6 +45,7 @@ Required properties:
     "socionext,uniphier-ld11-mio-reset" - for LD11 SoC (MIO)
     "socionext,uniphier-ld11-sd-reset"  - for LD11 SoC (SD)
     "socionext,uniphier-ld20-sd-reset"  - for LD20 SoC
+    "socionext,uniphier-pxs3-sd-reset"  - for PXs3 SoC
 - #reset-cells: should be 1.
 
 Example:
@@ -74,6 +76,7 @@ Required properties:
     "socionext,uniphier-pxs2-peri-reset" - for PXs2/LD6b SoC
     "socionext,uniphier-ld11-peri-reset" - for LD11 SoC
     "socionext,uniphier-ld20-peri-reset" - for LD20 SoC
+    "socionext,uniphier-pxs3-peri-reset" - for PXs3 SoC
 - #reset-cells: should be 1.
 
 Example:

Documentation/devicetree/bindings/soc/fsl/bman.txt

@@ -65,8 +65,8 @@ to the respective BMan instance
 BMan Private Memory Node
 
 BMan requires a contiguous range of physical memory used for the backing store
-for BMan Free Buffer Proxy Records (FBPR). This memory is reserved/allocated as a
-node under the /reserved-memory node
+for BMan Free Buffer Proxy Records (FBPR). This memory is reserved/allocated as
+a node under the /reserved-memory node.
 
 The BMan FBPR memory node must be named "bman-fbpr"
 
@@ -75,7 +75,9 @@ PROPERTIES
 - compatible
 	Usage:		required
 	Value type:	<stringlist>
-	Definition:	Must inclide "fsl,bman-fbpr"
+	Definition:	PPC platforms: Must include "fsl,bman-fbpr"
+			ARM platforms: Must include "shared-dma-pool"
+				       as well as the "no-map" property
 
 The following constraints are relevant to the FBPR private memory:
 	- The size must be 2^(size + 1), with size = 11..33. That is 4 KiB to
@@ -100,10 +102,10 @@ The example below shows a BMan FBPR dynamic allocation memory node
 		ranges;
 
 		bman_fbpr: bman-fbpr {
-			compatible = "fsl,bman-fbpr";
-			alloc-ranges = <0 0 0x10 0>;
+			compatible = "shared-mem-pool";
 			size = <0 0x1000000>;
 			alignment = <0 0x1000000>;
+			no-map;
 		};
 	};
 

Documentation/devicetree/bindings/soc/fsl/qman.txt

@@ -60,6 +60,12 @@ are located at offsets 0xbf8 and 0xbfc
 	Value type:	<prop-encoded-array>
 	Definition:	Reference input clock. Its frequency is half of the
 			platform clock
+- memory-regions
+	Usage:		Required for ARM
+	Value type:	<phandle array>
+	Definition:	List of phandles referencing the QMan private memory
+			nodes (described below). The qman-fqd node must be
+			first followed by qman-pfdr node. Only used on ARM
 
 Devices connected to a QMan instance via Direct Connect Portals (DCP) must link
 to the respective QMan instance
@@ -74,7 +80,9 @@ QMan Private Memory Nodes
 
 QMan requires two contiguous range of physical memory used for the backing store
 for QMan Frame Queue Descriptor (FQD) and Packed Frame Descriptor Record (PFDR).
-This memory is reserved/allocated as a nodes under the /reserved-memory node
+This memory is reserved/allocated as a node under the /reserved-memory node.
+
+For additional details about reserved memory regions see reserved-memory.txt
 
 The QMan FQD memory node must be named "qman-fqd"
 
@@ -83,7 +91,9 @@ PROPERTIES
 - compatible
 	Usage:		required
 	Value type:	<stringlist>
-	Definition:	Must inclide "fsl,qman-fqd"
+	Definition:	PPC platforms: Must include "fsl,qman-fqd"
+			ARM platforms: Must include "shared-dma-pool"
+				       as well as the "no-map" property
 
 The QMan PFDR memory node must be named "qman-pfdr"
 
@@ -92,7 +102,9 @@ PROPERTIES
 - compatible
 	Usage:		required
 	Value type:	<stringlist>
-	Definition:	Must inclide "fsl,qman-pfdr"
+	Definition:	PPC platforms: Must include "fsl,qman-pfdr"
+			ARM platforms: Must include "shared-dma-pool"
+				       as well as the "no-map" property
 
 The following constraints are relevant to the FQD and PFDR private memory:
 	- The size must be 2^(size + 1), with size = 11..29. That is 4 KiB to
@@ -117,16 +129,16 @@ The example below shows a QMan FQD and a PFDR dynamic allocation memory nodes
 		ranges;
 
 		qman_fqd: qman-fqd {
-			compatible = "fsl,qman-fqd";
-			alloc-ranges = <0 0 0x10 0>;
+			compatible = "shared-dma-pool";
 			size = <0 0x400000>;
 			alignment = <0 0x400000>;
+			no-map;
 		};
 		qman_pfdr: qman-pfdr {
-			compatible = "fsl,qman-pfdr";
-			alloc-ranges = <0 0 0x10 0>;
+			compatible = "shared-dma-pool";
 			size = <0 0x2000000>;
 			alignment = <0 0x2000000>;
+			no-map;
 		};
 	};
 

Documentation/devicetree/bindings/soc/mediatek/pwrap.txt

@@ -19,6 +19,7 @@ IP Pairing
 Required properties in pwrap device node.
 - compatible:
 	"mediatek,mt2701-pwrap" for MT2701/7623 SoCs
+	"mediatek,mt7622-pwrap" for MT7622 SoCs
 	"mediatek,mt8135-pwrap" for MT8135 SoCs
 	"mediatek,mt8173-pwrap" for MT8173 SoCs
 - interrupts: IRQ for pwrap in SOC
@@ -36,9 +37,12 @@ Required properties in pwrap device node.
 - clocks: Must contain an entry for each entry in clock-names.
 
 Optional properities:
-- pmic: Mediatek PMIC MFD is the child device of pwrap
+- pmic: Using either MediaTek PMIC MFD as the child device of pwrap
   See the following for child node definitions:
   Documentation/devicetree/bindings/mfd/mt6397.txt
+  or the regulator-only device as the child device of pwrap, such as MT6380.
+  See the following definitions for such kinds of devices.
+  Documentation/devicetree/bindings/regulator/mt6380-regulator.txt
 
 Example:
 	pwrap: pwrap@1000f000 {

MAINTAINERS

@@ -1219,6 +1219,8 @@ L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:	http://www.linux4sam.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91.git
 S:	Supported
+N:	at91
+N:	atmel
 F:	arch/arm/mach-at91/
 F:	include/soc/at91/
 F:	arch/arm/boot/dts/at91*.dts
@@ -1227,6 +1229,9 @@ F:	arch/arm/boot/dts/sama*.dts
 F:	arch/arm/boot/dts/sama*.dtsi
 F:	arch/arm/include/debug/at91.S
 F:	drivers/memory/atmel*
+F:	drivers/watchdog/sama5d4_wdt.c
+X:	drivers/input/touchscreen/atmel_mxt_ts.c
+X:	drivers/net/wireless/atmel/
 
 ARM/CALXEDA HIGHBANK ARCHITECTURE
 M:	Rob Herring <robh@kernel.org>
@@ -2141,7 +2146,6 @@ F:	drivers/gpio/gpio-zx.c
 F:	drivers/i2c/busses/i2c-zx2967.c
 F:	drivers/mmc/host/dw_mmc-zx.*
 F:	drivers/pinctrl/zte/
-F:	drivers/reset/reset-zx2967.c
 F:	drivers/soc/zte/
 F:	drivers/thermal/zx2967_thermal.c
 F:	drivers/watchdog/zx2967_wdt.c
@@ -2990,6 +2994,14 @@ L:	bcm-kernel-feedback-list@broadcom.com
 S:	Maintained
 F:	drivers/mtd/nand/brcmnand/
 
+BROADCOM STB DPFE DRIVER
+M:	Markus Mayer <mmayer@broadcom.com>
+M:	bcm-kernel-feedback-list@broadcom.com
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+F:	Documentation/devicetree/bindings/memory-controllers/brcm,dpfe-cpu.txt
+F:	drivers/memory/brcmstb_dpfe.c
+
 BROADCOM SYSTEMPORT ETHERNET DRIVER
 M:	Florian Fainelli <f.fainelli@gmail.com>
 L:	netdev@vger.kernel.org
@@ -13004,6 +13016,12 @@ F:	arch/arc/plat-axs10x
 F:	arch/arc/boot/dts/ax*
 F:	Documentation/devicetree/bindings/arc/axs10*
 
+SYNOPSYS AXS10x RESET CONTROLLER DRIVER
+M:	Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
+S:	Supported
+F:	drivers/reset/reset-axs10x.c
+F:	Documentation/devicetree/bindings/reset/snps,axs10x-reset.txt
+
 SYNOPSYS DESIGNWARE APB GPIO DRIVER
 M:	Hoan Tran <hotran@apm.com>
 L:	linux-gpio@vger.kernel.org

arch/arm/mach-mediatek/platsmp.c

@@ -54,12 +54,14 @@ static const struct of_device_id mtk_tz_smp_boot_infos[] __initconst = {
 	{ .compatible   = "mediatek,mt8135", .data = &mtk_mt8135_tz_boot },
 	{ .compatible   = "mediatek,mt8127", .data = &mtk_mt8135_tz_boot },
 	{ .compatible   = "mediatek,mt2701", .data = &mtk_mt8135_tz_boot },
+	{},
 };
 
 static const struct of_device_id mtk_smp_boot_infos[] __initconst = {
 	{ .compatible   = "mediatek,mt6589", .data = &mtk_mt6589_boot },
 	{ .compatible   = "mediatek,mt7623", .data = &mtk_mt7623_boot },
 	{ .compatible   = "mediatek,mt7623a", .data = &mtk_mt7623_boot },
+	{},
 };
 
 static void __iomem *mtk_smp_base;

arch/arm64/Kconfig.platforms

@@ -91,12 +91,13 @@ config ARCH_HISI
 	  This enables support for Hisilicon ARMv8 SoC family
 
 config ARCH_MEDIATEK
-	bool "Mediatek MT65xx & MT81xx ARMv8 SoC"
+	bool "MediaTek SoC Family"
 	select ARM_GIC
 	select PINCTRL
 	select MTK_TIMER
 	help
-	  Support for Mediatek MT65xx & MT81xx ARMv8 SoCs
+	  This enables support for MediaTek MT27xx, MT65xx, MT76xx
+	  & MT81xx ARMv8 SoCs
 
 config ARCH_MESON
 	bool "Amlogic Platforms"

drivers/bus/Kconfig

@@ -165,6 +165,14 @@ config TI_SYSC
 	  Generic driver for Texas Instruments interconnect target module
 	  found on many TI SoCs.
 
+config TS_NBUS
+	tristate "Technologic Systems NBUS Driver"
+	depends on SOC_IMX28
+	depends on OF_GPIO && PWM
+	help
+	  Driver for the Technologic Systems NBUS which is used to interface
+	  with the peripherals in the FPGA of the TS-4600 SoM.
+
 config UNIPHIER_SYSTEM_BUS
 	tristate "UniPhier System Bus driver"
 	depends on ARCH_UNIPHIER && OF

drivers/bus/Makefile

@@ -22,6 +22,7 @@ obj-$(CONFIG_SIMPLE_PM_BUS)	+= simple-pm-bus.o
 obj-$(CONFIG_TEGRA_ACONNECT)	+= tegra-aconnect.o
 obj-$(CONFIG_TEGRA_GMI)		+= tegra-gmi.o
 obj-$(CONFIG_TI_SYSC)		+= ti-sysc.o
+obj-$(CONFIG_TS_NBUS)		+= ts-nbus.o
 obj-$(CONFIG_UNIPHIER_SYSTEM_BUS)	+= uniphier-system-bus.o
 obj-$(CONFIG_VEXPRESS_CONFIG)	+= vexpress-config.o
 

drivers/bus/ts-nbus.c

+/*
+ * NBUS driver for TS-4600 based boards
+ *
+ * Copyright (c) 2016 - Savoir-faire Linux
+ * Author: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * This driver implements a GPIOs bit-banged bus, called the NBUS by Technologic
+ * Systems. It is used to communicate with the peripherals in the FPGA on the
+ * TS-4600 SoM.
+ */
+
+#include <linux/bitops.h>
+#include <linux/gpio/consumer.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/ts-nbus.h>
+
+#define TS_NBUS_DIRECTION_IN  0
+#define TS_NBUS_DIRECTION_OUT 1
+#define TS_NBUS_WRITE_ADR 0
+#define TS_NBUS_WRITE_VAL 1
+
+struct ts_nbus {
+	struct pwm_device *pwm;
+	struct gpio_descs *data;
+	struct gpio_desc *csn;
+	struct gpio_desc *txrx;
+	struct gpio_desc *strobe;
+	struct gpio_desc *ale;
+	struct gpio_desc *rdy;
+	struct mutex lock;
+};
+
+/*
+ * request all gpios required by the bus.
+ */
+static int ts_nbus_init_pdata(struct platform_device *pdev, struct ts_nbus
+		*ts_nbus)
+{
+	ts_nbus->data = devm_gpiod_get_array(&pdev->dev, "ts,data",
+			GPIOD_OUT_HIGH);
+	if (IS_ERR(ts_nbus->data)) {
+		dev_err(&pdev->dev, "failed to retrieve ts,data-gpio from dts\n");
+		return PTR_ERR(ts_nbus->data);
+	}
+
+	ts_nbus->csn = devm_gpiod_get(&pdev->dev, "ts,csn", GPIOD_OUT_HIGH);
+	if (IS_ERR(ts_nbus->csn)) {
+		dev_err(&pdev->dev, "failed to retrieve ts,csn-gpio from dts\n");
+		return PTR_ERR(ts_nbus->csn);
+	}
+
+	ts_nbus->txrx = devm_gpiod_get(&pdev->dev, "ts,txrx", GPIOD_OUT_HIGH);
+	if (IS_ERR(ts_nbus->txrx)) {
+		dev_err(&pdev->dev, "failed to retrieve ts,txrx-gpio from dts\n");
+		return PTR_ERR(ts_nbus->txrx);
+	}
+
+	ts_nbus->strobe = devm_gpiod_get(&pdev->dev, "ts,strobe", GPIOD_OUT_HIGH);
+	if (IS_ERR(ts_nbus->strobe)) {
+		dev_err(&pdev->dev, "failed to retrieve ts,strobe-gpio from dts\n");
+		return PTR_ERR(ts_nbus->strobe);
+	}
+
+	ts_nbus->ale = devm_gpiod_get(&pdev->dev, "ts,ale", GPIOD_OUT_HIGH);
+	if (IS_ERR(ts_nbus->ale)) {
+		dev_err(&pdev->dev, "failed to retrieve ts,ale-gpio from dts\n");
+		return PTR_ERR(ts_nbus->ale);
+	}
+
+	ts_nbus->rdy = devm_gpiod_get(&pdev->dev, "ts,rdy", GPIOD_IN);
+	if (IS_ERR(ts_nbus->rdy)) {
+		dev_err(&pdev->dev, "failed to retrieve ts,rdy-gpio from dts\n");
+		return PTR_ERR(ts_nbus->rdy);
+	}
+
+	return 0;
+}
+
+/*
+ * the data gpios are used for reading and writing values, their directions
+ * should be adjusted accordingly.
+ */
+static void ts_nbus_set_direction(struct ts_nbus *ts_nbus, int direction)
+{
+	int i;
+
+	for (i = 0; i < 8; i++) {
+		if (direction == TS_NBUS_DIRECTION_IN)
+			gpiod_direction_input(ts_nbus->data->desc[i]);
+		else
+			/* when used as output the default state of the data
+			 * lines are set to high */
+			gpiod_direction_output(ts_nbus->data->desc[i], 1);
+	}
+}
+
+/*
+ * reset the bus in its initial state.
+ * The data, csn, strobe and ale lines must be zero'ed to let the FPGA knows a
+ * new transaction can be process.
+ */
+static void ts_nbus_reset_bus(struct ts_nbus *ts_nbus)
+{
+	int i;
+	int values[8];
+
+	for (i = 0; i < 8; i++)
+		values[i] = 0;
+
+	gpiod_set_array_value_cansleep(8, ts_nbus->data->desc, values);
+	gpiod_set_value_cansleep(ts_nbus->csn, 0);
+	gpiod_set_value_cansleep(ts_nbus->strobe, 0);
+	gpiod_set_value_cansleep(ts_nbus->ale, 0);
+}
+
+/*
+ * let the FPGA knows it can process.
+ */
+static void ts_nbus_start_transaction(struct ts_nbus *ts_nbus)
+{
+	gpiod_set_value_cansleep(ts_nbus->strobe, 1);
+}
+
+/*
+ * read a byte value from the data gpios.
+ * return 0 on success or negative errno on failure.
+ */
+static int ts_nbus_read_byte(struct ts_nbus *ts_nbus, u8 *val)
+{
+	struct gpio_descs *gpios = ts_nbus->data;
+	int ret, i;
+
+	*val = 0;
+	for (i = 0; i < 8; i++) {
+		ret = gpiod_get_value_cansleep(gpios->desc[i]);
+		if (ret < 0)
+			return ret;
+		if (ret)
+			*val |= BIT(i);
+	}
+
+	return 0;
+}
+
+/*
+ * set the data gpios accordingly to the byte value.
+ */
+static void ts_nbus_write_byte(struct ts_nbus *ts_nbus, u8 byte)
+{
+	struct gpio_descs *gpios = ts_nbus->data;
+	int i;
+	int values[8];
+
+	for (i = 0; i < 8; i++)
+		if (byte & BIT(i))
+			values[i] = 1;
+		else
+			values[i] = 0;
+
+	gpiod_set_array_value_cansleep(8, gpios->desc, values);
+}
+
+/*
+ * reading the bus consists of resetting the bus, then notifying the FPGA to
+ * send the data in the data gpios and return the read value.
+ * return 0 on success or negative errno on failure.
+ */
+static int ts_nbus_read_bus(struct ts_nbus *ts_nbus, u8 *val)
+{
+	ts_nbus_reset_bus(ts_nbus);
+	ts_nbus_start_transaction(ts_nbus);
+
+	return ts_nbus_read_byte(ts_nbus, val);
+}
+
+/*
+ * writing to the bus consists of resetting the bus, then define the type of
+ * command (address/value), write the data and notify the FPGA to retrieve the
+ * value in the data gpios.
+ */
+static void ts_nbus_write_bus(struct ts_nbus *ts_nbus, int cmd, u8 val)
+{
+	ts_nbus_reset_bus(ts_nbus);
+
+	if (cmd == TS_NBUS_WRITE_ADR)
+		gpiod_set_value_cansleep(ts_nbus->ale, 1);
+
+	ts_nbus_write_byte(ts_nbus, val);
+	ts_nbus_start_transaction(ts_nbus);
+}
+
+/*
+ * read the value in the FPGA register at the given address.
+ * return 0 on success or negative errno on failure.
+ */
+int ts_nbus_read(struct ts_nbus *ts_nbus, u8 adr, u16 *val)
+{
+	int ret, i;
+	u8 byte;
+
+	/* bus access must be atomic */
+	mutex_lock(&ts_nbus->lock);
+
+	/* set the bus in read mode */
+	gpiod_set_value_cansleep(ts_nbus->txrx, 0);
+
+	/* write address */
+	ts_nbus_write_bus(ts_nbus, TS_NBUS_WRITE_ADR, adr);
+
+	/* set the data gpios direction as input before reading */
+	ts_nbus_set_direction(ts_nbus, TS_NBUS_DIRECTION_IN);
+
+	/* reading value MSB first */
+	do {
+		*val = 0;
+		byte = 0;
+		for (i = 1; i >= 0; i--) {
+			/* read a byte from the bus, leave on error */
+			ret = ts_nbus_read_bus(ts_nbus, &byte);
+			if (ret < 0)
+				goto err;
+
+			/* append the byte read to the final value */
+			*val |= byte << (i * 8);
+		}
+		gpiod_set_value_cansleep(ts_nbus->csn, 1);
+		ret = gpiod_get_value_cansleep(ts_nbus->rdy);
+	} while (ret);
+
+err:
+	/* restore the data gpios direction as output after reading */
+	ts_nbus_set_direction(ts_nbus, TS_NBUS_DIRECTION_OUT);
+
+	mutex_unlock(&ts_nbus->lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(ts_nbus_read);
+
+/*
+ * write the desired value in the FPGA register at the given address.
+ */
+int ts_nbus_write(struct ts_nbus *ts_nbus, u8 adr, u16 val)
+{
+	int i;
+
+	/* bus access must be atomic */
+	mutex_lock(&ts_nbus->lock);
+
+	/* set the bus in write mode */
+	gpiod_set_value_cansleep(ts_nbus->txrx, 1);
+
+	/* write address */
+	ts_nbus_write_bus(ts_nbus, TS_NBUS_WRITE_ADR, adr);
+
+	/* writing value MSB first */
+	for (i = 1; i >= 0; i--)
+		ts_nbus_write_bus(ts_nbus, TS_NBUS_WRITE_VAL, (u8)(val >> (i * 8)));
+
+	/* wait for completion */
+	gpiod_set_value_cansleep(ts_nbus->csn, 1);
+	while (gpiod_get_value_cansleep(ts_nbus->rdy) != 0) {
+		gpiod_set_value_cansleep(ts_nbus->csn, 0);
+		gpiod_set_value_cansleep(ts_nbus->csn, 1);
+	}
+
+	mutex_unlock(&ts_nbus->lock);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ts_nbus_write);
+
+static int ts_nbus_probe(struct platform_device *pdev)
+{
+	struct pwm_device *pwm;
+	struct pwm_args pargs;
+	struct device *dev = &pdev->dev;
+	struct ts_nbus *ts_nbus;
+	int ret;
+
+	ts_nbus = devm_kzalloc(dev, sizeof(*ts_nbus), GFP_KERNEL);
+	if (!ts_nbus)
+		return -ENOMEM;
+
+	mutex_init(&ts_nbus->lock);
+
+	ret = ts_nbus_init_pdata(pdev, ts_nbus);
+	if (ret < 0)
+		return ret;
+
+	pwm = devm_pwm_get(dev, NULL);
+	if (IS_ERR(pwm)) {
+		ret = PTR_ERR(pwm);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "unable to request PWM\n");
+		return ret;
+	}
+
+	pwm_get_args(pwm, &pargs);
+	if (!pargs.period) {
+		dev_err(&pdev->dev, "invalid PWM period\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * FIXME: pwm_apply_args() should be removed when switching to
+	 * the atomic PWM API.
+	 */
+	pwm_apply_args(pwm);
+	ret = pwm_config(pwm, pargs.period, pargs.period);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * we can now start the FPGA and populate the peripherals.
+	 */
+	pwm_enable(pwm);
+	ts_nbus->pwm = pwm;
+
+	/*
+	 * let the child nodes retrieve this instance of the ts-nbus.
+	 */
+	dev_set_drvdata(dev, ts_nbus);
+
+	ret = of_platform_populate(dev->of_node, NULL, NULL, dev);
+	if (ret < 0)
+		return ret;
+
+	dev_info(dev, "initialized\n");
+
+	return 0;
+}
+
+static int ts_nbus_remove(struct platform_device *pdev)
+{
+	struct ts_nbus *ts_nbus = dev_get_drvdata(&pdev->dev);
+
+	/* shutdown the FPGA */
+	mutex_lock(&ts_nbus->lock);
+	pwm_disable(ts_nbus->pwm);
+	mutex_unlock(&ts_nbus->lock);
+
+	return 0;
+}
+
+static const struct of_device_id ts_nbus_of_match[] = {
+	{ .compatible = "technologic,ts-nbus", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, ts_nbus_of_match);
+
+static struct platform_driver ts_nbus_driver = {
+	.probe		= ts_nbus_probe,
+	.remove		= ts_nbus_remove,
+	.driver		= {
+		.name	= "ts_nbus",
+		.of_match_table = ts_nbus_of_match,
+	},
+};
+
+module_platform_driver(ts_nbus_driver);
+
+MODULE_ALIAS("platform:ts_nbus");
+MODULE_AUTHOR("Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>");
+MODULE_DESCRIPTION("Technologic Systems NBUS");
+MODULE_LICENSE("GPL v2");

drivers/clk/bcm/Kconfig

@@ -30,6 +30,15 @@ config CLK_BCM_CYGNUS
 	help
 	  Enable common clock framework support for the Broadcom Cygnus SoC
 
+config CLK_BCM_HR2
+	bool "Broadcom Hurricane 2 clock support"
+	depends on ARCH_BCM_HR2 || COMPILE_TEST
+	select COMMON_CLK_IPROC
+	default ARCH_BCM_HR2
+	help
+	  Enable common clock framework support for the Broadcom Hurricane 2
+	  SoC
+
 config CLK_BCM_NSP
 	bool "Broadcom Northstar/Northstar Plus clock support"
 	depends on ARCH_BCM_5301X || ARCH_BCM_NSP || COMPILE_TEST

drivers/clk/bcm/Makefile

@@ -9,6 +9,7 @@ obj-$(CONFIG_ARCH_BCM2835)	+= clk-bcm2835.o
 obj-$(CONFIG_ARCH_BCM2835)	+= clk-bcm2835-aux.o
 obj-$(CONFIG_ARCH_BCM_53573)	+= clk-bcm53573-ilp.o
 obj-$(CONFIG_CLK_BCM_CYGNUS)	+= clk-cygnus.o
+obj-$(CONFIG_CLK_BCM_HR2)	+= clk-hr2.o
 obj-$(CONFIG_CLK_BCM_NSP)	+= clk-nsp.o
 obj-$(CONFIG_CLK_BCM_NS2)	+= clk-ns2.o
 obj-$(CONFIG_CLK_BCM_SR)	+= clk-sr.o

drivers/clk/bcm/clk-hr2.c

+/*
+ * Copyright (C) 2017 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include "clk-iproc.h"
+
+static void __init hr2_armpll_init(struct device_node *node)
+{
+	iproc_armpll_setup(node);
+}
+CLK_OF_DECLARE(hr2_armpll, "brcm,hr2-armpll", hr2_armpll_init);

drivers/firmware/Kconfig

@@ -215,6 +215,17 @@ config QCOM_SCM_64
 	def_bool y
 	depends on QCOM_SCM && ARM64
 
+config QCOM_SCM_DOWNLOAD_MODE_DEFAULT
+	bool "Qualcomm download mode enabled by default"
+	depends on QCOM_SCM
+	help
+	  A device with "download mode" enabled will upon an unexpected
+	  warm-restart enter a special debug mode that allows the user to
+	  "download" memory content over USB for offline postmortem analysis.
+	  The feature can be enabled/disabled on the kernel command line.
+
+	  Say Y here to enable "download mode" by default.
+
 config TI_SCI_PROTOCOL
 	tristate "TI System Control Interface (TISCI) Message Protocol"
 	depends on TI_MESSAGE_MANAGER

drivers/firmware/psci_checker.c

@@ -340,6 +340,7 @@ static int suspend_test_thread(void *arg)
 	 * later.
 	 */
 	del_timer(&wakeup_timer);
+	destroy_timer_on_stack(&wakeup_timer);
 
 	if (atomic_dec_return_relaxed(&nb_active_threads) == 0)
 		complete(&suspend_threads_done);

drivers/firmware/qcom_scm-32.c

@@ -561,6 +561,12 @@ int __qcom_scm_pas_mss_reset(struct device *dev, bool reset)
 	return ret ? : le32_to_cpu(out);
 }
 
+int __qcom_scm_set_dload_mode(struct device *dev, bool enable)
+{
+	return qcom_scm_call_atomic2(QCOM_SCM_SVC_BOOT, QCOM_SCM_SET_DLOAD_MODE,
+				     enable ? QCOM_SCM_SET_DLOAD_MODE : 0, 0);
+}
+
 int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id)
 {
 	struct {
@@ -596,3 +602,21 @@ int __qcom_scm_iommu_secure_ptbl_init(struct device *dev, u64 addr, u32 size,
 {
 	return -ENODEV;
 }
+
+int __qcom_scm_io_readl(struct device *dev, phys_addr_t addr,
+			unsigned int *val)
+{
+	int ret;
+
+	ret = qcom_scm_call_atomic1(QCOM_SCM_SVC_IO, QCOM_SCM_IO_READ, addr);
+	if (ret >= 0)
+		*val = ret;
+
+	return ret < 0 ? ret : 0;
+}
+
+int __qcom_scm_io_writel(struct device *dev, phys_addr_t addr, unsigned int val)
+{
+	return qcom_scm_call_atomic2(QCOM_SCM_SVC_IO, QCOM_SCM_IO_WRITE,
+				     addr, val);
+}

drivers/firmware/qcom_scm-64.c

@@ -439,3 +439,47 @@ int __qcom_scm_iommu_secure_ptbl_init(struct device *dev, u64 addr, u32 size,
 
 	return ret;
 }
+
+int __qcom_scm_set_dload_mode(struct device *dev, bool enable)
+{
+	struct qcom_scm_desc desc = {0};
+	struct arm_smccc_res res;
+
+	desc.args[0] = QCOM_SCM_SET_DLOAD_MODE;
+	desc.args[1] = enable ? QCOM_SCM_SET_DLOAD_MODE : 0;
+	desc.arginfo = QCOM_SCM_ARGS(2);
+
+	return qcom_scm_call(dev, QCOM_SCM_SVC_BOOT, QCOM_SCM_SET_DLOAD_MODE,
+			     &desc, &res);
+}
+
+int __qcom_scm_io_readl(struct device *dev, phys_addr_t addr,
+			unsigned int *val)
+{
+	struct qcom_scm_desc desc = {0};
+	struct arm_smccc_res res;
+	int ret;
+
+	desc.args[0] = addr;
+	desc.arginfo = QCOM_SCM_ARGS(1);
+
+	ret = qcom_scm_call(dev, QCOM_SCM_SVC_IO, QCOM_SCM_IO_READ,
+			    &desc, &res);
+	if (ret >= 0)
+		*val = res.a1;
+
+	return ret < 0 ? ret : 0;
+}
+
+int __qcom_scm_io_writel(struct device *dev, phys_addr_t addr, unsigned int val)
+{
+	struct qcom_scm_desc desc = {0};
+	struct arm_smccc_res res;
+
+	desc.args[0] = addr;
+	desc.args[1] = val;
+	desc.arginfo = QCOM_SCM_ARGS(2);
+
+	return qcom_scm_call(dev, QCOM_SCM_SVC_IO, QCOM_SCM_IO_WRITE,
+			     &desc, &res);
+}

drivers/firmware/qcom_scm.c

@@ -19,15 +19,20 @@
 #include <linux/cpumask.h>
 #include <linux/export.h>
 #include <linux/dma-mapping.h>
+#include <linux/module.h>
 #include <linux/types.h>
 #include <linux/qcom_scm.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <linux/clk.h>
 #include <linux/reset-controller.h>
 
 #include "qcom_scm.h"
 
+static bool download_mode = IS_ENABLED(CONFIG_QCOM_SCM_DOWNLOAD_MODE_DEFAULT);
+module_param(download_mode, bool, 0);
+
 #define SCM_HAS_CORE_CLK	BIT(0)
 #define SCM_HAS_IFACE_CLK	BIT(1)
 #define SCM_HAS_BUS_CLK		BIT(2)
@@ -38,6 +43,8 @@ struct qcom_scm {
 	struct clk *iface_clk;
 	struct clk *bus_clk;
 	struct reset_controller_dev reset;
+
+	u64 dload_mode_addr;
 };
 
 static struct qcom_scm *__scm;
@@ -333,6 +340,66 @@ int qcom_scm_iommu_secure_ptbl_init(u64 addr, u32 size, u32 spare)
 }
 EXPORT_SYMBOL(qcom_scm_iommu_secure_ptbl_init);
 
+int qcom_scm_io_readl(phys_addr_t addr, unsigned int *val)
+{
+	return __qcom_scm_io_readl(__scm->dev, addr, val);
+}
+EXPORT_SYMBOL(qcom_scm_io_readl);
+
+int qcom_scm_io_writel(phys_addr_t addr, unsigned int val)
+{
+	return __qcom_scm_io_writel(__scm->dev, addr, val);
+}
+EXPORT_SYMBOL(qcom_scm_io_writel);
+
+static void qcom_scm_set_download_mode(bool enable)
+{
+	bool avail;
+	int ret = 0;
+
+	avail = __qcom_scm_is_call_available(__scm->dev,
+					     QCOM_SCM_SVC_BOOT,
+					     QCOM_SCM_SET_DLOAD_MODE);
+	if (avail) {
+		ret = __qcom_scm_set_dload_mode(__scm->dev, enable);
+	} else if (__scm->dload_mode_addr) {
+		ret = __qcom_scm_io_writel(__scm->dev, __scm->dload_mode_addr,
+					   enable ? QCOM_SCM_SET_DLOAD_MODE : 0);
+	} else {
+		dev_err(__scm->dev,
+			"No available mechanism for setting download mode\n");
+	}
+
+	if (ret)
+		dev_err(__scm->dev, "failed to set download mode: %d\n", ret);
+}
+
+static int qcom_scm_find_dload_address(struct device *dev, u64 *addr)
+{
+	struct device_node *tcsr;
+	struct device_node *np = dev->of_node;
+	struct resource res;
+	u32 offset;
+	int ret;
+
+	tcsr = of_parse_phandle(np, "qcom,dload-mode", 0);
+	if (!tcsr)
+		return 0;
+
+	ret = of_address_to_resource(tcsr, 0, &res);
+	of_node_put(tcsr);
+	if (ret)
+		return ret;
+
+	ret = of_property_read_u32_index(np, "qcom,dload-mode", 1, &offset);
+	if (ret < 0)
+		return ret;
+
+	*addr = res.start + offset;
+
+	return 0;
+}
+
 /**
  * qcom_scm_is_available() - Checks if SCM is available
  */
@@ -358,6 +425,10 @@ static int qcom_scm_probe(struct platform_device *pdev)
 	if (!scm)
 		return -ENOMEM;
 
+	ret = qcom_scm_find_dload_address(&pdev->dev, &scm->dload_mode_addr);
+	if (ret < 0)
+		return ret;
+
 	clks = (unsigned long)of_device_get_match_data(&pdev->dev);
 	if (clks & SCM_HAS_CORE_CLK) {
 		scm->core_clk = devm_clk_get(&pdev->dev, "core");
@@ -406,9 +477,24 @@ static int qcom_scm_probe(struct platform_device *pdev)
 
 	__qcom_scm_init();
 
+	/*
+	 * If requested enable "download mode", from this point on warmboot
+	 * will cause the the boot stages to enter download mode, unless
+	 * disabled below by a clean shutdown/reboot.
+	 */
+	if (download_mode)
+		qcom_scm_set_download_mode(true);
+
 	return 0;
 }
 
+static void qcom_scm_shutdown(struct platform_device *pdev)
+{
+	/* Clean shutdown, disable download mode to allow normal restart */
+	if (download_mode)
+		qcom_scm_set_download_mode(false);
+}
+
 static const struct of_device_id qcom_scm_dt_match[] = {
 	{ .compatible = "qcom,scm-apq8064",
 	  /* FIXME: This should have .data = (void *) SCM_HAS_CORE_CLK */
@@ -436,6 +522,7 @@ static struct platform_driver qcom_scm_driver = {
 		.of_match_table = qcom_scm_dt_match,
 	},
 	.probe = qcom_scm_probe,
+	.shutdown = qcom_scm_shutdown,
 };
 
 static int __init qcom_scm_init(void)

drivers/firmware/qcom_scm.h

@@ -14,9 +14,11 @@
 
 #define QCOM_SCM_SVC_BOOT		0x1
 #define QCOM_SCM_BOOT_ADDR		0x1
+#define QCOM_SCM_SET_DLOAD_MODE		0x10
 #define QCOM_SCM_BOOT_ADDR_MC		0x11
 #define QCOM_SCM_SET_REMOTE_STATE	0xa
 extern int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id);
+extern int __qcom_scm_set_dload_mode(struct device *dev, bool enable);
 
 #define QCOM_SCM_FLAG_HLOS		0x01
 #define QCOM_SCM_FLAG_COLDBOOT_MC	0x02
@@ -30,6 +32,12 @@ extern int __qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus);
 #define QCOM_SCM_CMD_CORE_HOTPLUGGED	0x10
 extern void __qcom_scm_cpu_power_down(u32 flags);
 
+#define QCOM_SCM_SVC_IO			0x5
+#define QCOM_SCM_IO_READ		0x1
+#define QCOM_SCM_IO_WRITE		0x2
+extern int __qcom_scm_io_readl(struct device *dev, phys_addr_t addr, unsigned int *val);
+extern int __qcom_scm_io_writel(struct device *dev, phys_addr_t addr, unsigned int val);
+
 #define QCOM_SCM_SVC_INFO		0x6
 #define QCOM_IS_CALL_AVAIL_CMD		0x1
 extern int __qcom_scm_is_call_available(struct device *dev, u32 svc_id,

drivers/firmware/tegra/Makefile

-obj-$(CONFIG_TEGRA_BPMP)	+= bpmp.o
+tegra-bpmp-y			= bpmp.o
+tegra-bpmp-$(CONFIG_DEBUG_FS)	+= bpmp-debugfs.o
+obj-$(CONFIG_TEGRA_BPMP)	+= tegra-bpmp.o
 obj-$(CONFIG_TEGRA_IVC)		+= ivc.o

drivers/firmware/tegra/bpmp.c

@@ -194,16 +194,24 @@ static int tegra_bpmp_wait_master_free(struct tegra_bpmp_channel *channel)
 }
 
 static ssize_t __tegra_bpmp_channel_read(struct tegra_bpmp_channel *channel,
-					 void *data, size_t size)
+					 void *data, size_t size, int *ret)
 {
+	int err;
+
 	if (data && size > 0)
 		memcpy(data, channel->ib->data, size);
 
-	return tegra_ivc_read_advance(channel->ivc);
+	err = tegra_ivc_read_advance(channel->ivc);
+	if (err < 0)
+		return err;
+
+	*ret = channel->ib->code;
+
+	return 0;
 }
 
 static ssize_t tegra_bpmp_channel_read(struct tegra_bpmp_channel *channel,
-				       void *data, size_t size)
+				       void *data, size_t size, int *ret)
 {
 	struct tegra_bpmp *bpmp = channel->bpmp;
 	unsigned long flags;
@@ -217,7 +225,7 @@ static ssize_t tegra_bpmp_channel_read(struct tegra_bpmp_channel *channel,
 	}
 
 	spin_lock_irqsave(&bpmp->lock, flags);
-	err = __tegra_bpmp_channel_read(channel, data, size);
+	err = __tegra_bpmp_channel_read(channel, data, size, ret);
 	clear_bit(index, bpmp->threaded.allocated);
 	spin_unlock_irqrestore(&bpmp->lock, flags);
 
@@ -337,7 +345,8 @@ int tegra_bpmp_transfer_atomic(struct tegra_bpmp *bpmp,
 	if (err < 0)
 		return err;
 
-	return __tegra_bpmp_channel_read(channel, msg->rx.data, msg->rx.size);
+	return __tegra_bpmp_channel_read(channel, msg->rx.data, msg->rx.size,
+					 &msg->rx.ret);
 }
 EXPORT_SYMBOL_GPL(tegra_bpmp_transfer_atomic);
 
@@ -371,7 +380,8 @@ int tegra_bpmp_transfer(struct tegra_bpmp *bpmp,
 	if (err == 0)
 		return -ETIMEDOUT;
 
-	return tegra_bpmp_channel_read(channel, msg->rx.data, msg->rx.size);
+	return tegra_bpmp_channel_read(channel, msg->rx.data, msg->rx.size,
+				       &msg->rx.ret);
 }
 EXPORT_SYMBOL_GPL(tegra_bpmp_transfer);
 
@@ -387,8 +397,8 @@ static struct tegra_bpmp_mrq *tegra_bpmp_find_mrq(struct tegra_bpmp *bpmp,
 	return NULL;
 }
 
-static void tegra_bpmp_mrq_return(struct tegra_bpmp_channel *channel,
-				  int code, const void *data, size_t size)
+void tegra_bpmp_mrq_return(struct tegra_bpmp_channel *channel, int code,
+			   const void *data, size_t size)
 {
 	unsigned long flags = channel->ib->flags;
 	struct tegra_bpmp *bpmp = channel->bpmp;
@@ -426,6 +436,7 @@ static void tegra_bpmp_mrq_return(struct tegra_bpmp_channel *channel,
 		mbox_client_txdone(bpmp->mbox.channel, 0);
 	}
 }
+EXPORT_SYMBOL_GPL(tegra_bpmp_mrq_return);
 
 static void tegra_bpmp_handle_mrq(struct tegra_bpmp *bpmp,
 				  unsigned int mrq,
@@ -824,6 +835,10 @@ static int tegra_bpmp_probe(struct platform_device *pdev)
 	if (err < 0)
 		goto free_mrq;
 
+	err = tegra_bpmp_init_debugfs(bpmp);
+	if (err < 0)
+		dev_err(&pdev->dev, "debugfs initialization failed: %d\n", err);
+
 	return 0;
 
 free_mrq:

drivers/firmware/ti_sci.c

@@ -439,7 +439,7 @@ static inline int ti_sci_do_xfer(struct ti_sci_info *info,
 	/* And we wait for the response. */
 	timeout = msecs_to_jiffies(info->desc->max_rx_timeout_ms);
 	if (!wait_for_completion_timeout(&xfer->done, timeout)) {
-		dev_err(dev, "Mbox timedout in resp(caller: %pF)\n",
+		dev_err(dev, "Mbox timedout in resp(caller: %pS)\n",
 			(void *)_RET_IP_);
 		ret = -ETIMEDOUT;
 	}

drivers/memory/Makefile

@@ -9,6 +9,7 @@ endif
 obj-$(CONFIG_ARM_PL172_MPMC)	+= pl172.o
 obj-$(CONFIG_ATMEL_SDRAMC)	+= atmel-sdramc.o
 obj-$(CONFIG_ATMEL_EBI)		+= atmel-ebi.o
+obj-$(CONFIG_ARCH_BRCMSTB)	+= brcmstb_dpfe.o
 obj-$(CONFIG_TI_AEMIF)		+= ti-aemif.o
 obj-$(CONFIG_TI_EMIF)		+= emif.o
 obj-$(CONFIG_OMAP_GPMC)		+= omap-gpmc.o

drivers/memory/omap-gpmc.c

@@ -1075,11 +1075,33 @@ int gpmc_configure(int cmd, int wval)
 }
 EXPORT_SYMBOL(gpmc_configure);
 
-void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs)
+static bool gpmc_nand_writebuffer_empty(void)
+{
+	if (gpmc_read_reg(GPMC_STATUS) & GPMC_STATUS_EMPTYWRITEBUFFERSTATUS)
+		return true;
+
+	return false;
+}
+
+static struct gpmc_nand_ops nand_ops = {
+	.nand_writebuffer_empty = gpmc_nand_writebuffer_empty,
+};
+
+/**
+ * gpmc_omap_get_nand_ops - Get the GPMC NAND interface
+ * @regs: the GPMC NAND register map exclusive for NAND use.
+ * @cs: GPMC chip select number on which the NAND sits. The
+ *      register map returned will be specific to this chip select.
+ *
+ * Returns NULL on error e.g. invalid cs.
+ */
+struct gpmc_nand_ops *gpmc_omap_get_nand_ops(struct gpmc_nand_regs *reg, int cs)
 {
 	int i;
 
-	reg->gpmc_status = NULL;	/* deprecated */
+	if (cs >= gpmc_cs_num)
+		return NULL;
+
 	reg->gpmc_nand_command = gpmc_base + GPMC_CS0_OFFSET +
 				GPMC_CS_NAND_COMMAND + GPMC_CS_SIZE * cs;
 	reg->gpmc_nand_address = gpmc_base + GPMC_CS0_OFFSET +
@@ -1111,34 +1133,6 @@ void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs)
 		reg->gpmc_bch_result6[i] = gpmc_base + GPMC_ECC_BCH_RESULT_6 +
 					   i * GPMC_BCH_SIZE;
 	}
-}
-
-static bool gpmc_nand_writebuffer_empty(void)
-{
-	if (gpmc_read_reg(GPMC_STATUS) & GPMC_STATUS_EMPTYWRITEBUFFERSTATUS)
-		return true;
-
-	return false;
-}
-
-static struct gpmc_nand_ops nand_ops = {
-	.nand_writebuffer_empty = gpmc_nand_writebuffer_empty,
-};
-
-/**
- * gpmc_omap_get_nand_ops - Get the GPMC NAND interface
- * @regs: the GPMC NAND register map exclusive for NAND use.
- * @cs: GPMC chip select number on which the NAND sits. The
- *      register map returned will be specific to this chip select.
- *
- * Returns NULL on error e.g. invalid cs.
- */
-struct gpmc_nand_ops *gpmc_omap_get_nand_ops(struct gpmc_nand_regs *reg, int cs)
-{
-	if (cs >= gpmc_cs_num)
-		return NULL;
-
-	gpmc_update_nand_reg(reg, cs);
 
 	return &nand_ops;
 }

drivers/of/of_reserved_mem.c

@@ -397,3 +397,29 @@ void of_reserved_mem_device_release(struct device *dev)
 	rmem->ops->device_release(rmem, dev);
 }
 EXPORT_SYMBOL_GPL(of_reserved_mem_device_release);
+
+/**
+ * of_reserved_mem_lookup() - acquire reserved_mem from a device node
+ * @np:		node pointer of the desired reserved-memory region
+ *
+ * This function allows drivers to acquire a reference to the reserved_mem
+ * struct based on a device node handle.
+ *
+ * Returns a reserved_mem reference, or NULL on error.
+ */
+struct reserved_mem *of_reserved_mem_lookup(struct device_node *np)
+{
+	const char *name;
+	int i;
+
+	if (!np->full_name)
+		return NULL;
+
+	name = kbasename(np->full_name);
+	for (i = 0; i < reserved_mem_count; i++)
+		if (!strcmp(reserved_mem[i].name, name))
+			return &reserved_mem[i];
+
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(of_reserved_mem_lookup);

drivers/of/platform.c

@@ -497,6 +497,12 @@ int of_platform_default_populate(struct device_node *root,
 EXPORT_SYMBOL_GPL(of_platform_default_populate);
 
 #ifndef CONFIG_PPC
+static const struct of_device_id reserved_mem_matches[] = {
+	{ .compatible = "qcom,rmtfs-mem" },
+	{ .compatible = "ramoops" },
+	{}
+};
+
 static int __init of_platform_default_populate_init(void)
 {
 	struct device_node *node;
@@ -505,15 +511,12 @@ static int __init of_platform_default_populate_init(void)
 		return -ENODEV;
 
 	/*
-	 * Handle ramoops explicitly, since it is inside /reserved-memory,
-	 * which lacks a "compatible" property.
+	 * Handle certain compatibles explicitly, since we don't want to create
+	 * platform_devices for every node in /reserved-memory with a
+	 * "compatible",
 	 */
-	node = of_find_node_by_path("/reserved-memory");
-	if (node) {
-		node = of_find_compatible_node(node, NULL, "ramoops");
-		if (node)
-			of_platform_device_create(node, NULL, NULL);
-	}
+	for_each_matching_node(node, reserved_mem_matches)
+		of_platform_device_create(node, NULL, NULL);
 
 	/* Populate everything else. */
 	of_platform_default_populate(NULL, NULL, NULL);

drivers/reset/Kconfig

@@ -28,6 +28,12 @@ config RESET_ATH79
 	  This enables the ATH79 reset controller driver that supports the
 	  AR71xx SoC reset controller.
 
+config RESET_AXS10X
+	bool "AXS10x Reset Driver" if COMPILE_TEST
+	default ARC_PLAT_AXS10X
+	help
+	  This enables the reset controller driver for AXS10x.
+
 config RESET_BERLIN
 	bool "Berlin Reset Driver" if COMPILE_TEST
 	default ARCH_BERLIN
@@ -75,21 +81,21 @@ config RESET_PISTACHIO
 	help
 	  This enables the reset driver for ImgTec Pistachio SoCs.
 
-config RESET_SOCFPGA
-	bool "SoCFPGA Reset Driver" if COMPILE_TEST
-	default ARCH_SOCFPGA
+config RESET_SIMPLE
+	bool "Simple Reset Controller Driver" if COMPILE_TEST
+	default ARCH_SOCFPGA || ARCH_STM32 || ARCH_STRATIX10 || ARCH_SUNXI || ARCH_ZX
 	help
-	  This enables the reset controller driver for Altera SoCFPGAs.
+	  This enables a simple reset controller driver for reset lines that
+	  that can be asserted and deasserted by toggling bits in a contiguous,
+	  exclusive register space.
 
-config RESET_STM32
-	bool "STM32 Reset Driver" if COMPILE_TEST
-	default ARCH_STM32
-	help
-	  This enables the RCC reset controller driver for STM32 MCUs.
+	  Currently this driver supports Altera SoCFPGAs, the RCC reset
+	  controller in STM32 MCUs, Allwinner SoCs, and ZTE's zx2967 family.
 
 config RESET_SUNXI
 	bool "Allwinner SoCs Reset Driver" if COMPILE_TEST && !ARCH_SUNXI
 	default ARCH_SUNXI
+	select RESET_SIMPLE
 	help
 	  This enables the reset driver for Allwinner SoCs.
 
@@ -121,12 +127,6 @@ config RESET_UNIPHIER
 	  Say Y if you want to control reset signals provided by System Control
 	  block, Media I/O block, Peripheral Block.
 
-config RESET_ZX2967
-	bool "ZTE ZX2967 Reset Driver"
-	depends on ARCH_ZX || COMPILE_TEST
-	help
-	  This enables the reset controller driver for ZTE's zx2967 family.
-
 config RESET_ZYNQ
 	bool "ZYNQ Reset Driver" if COMPILE_TEST
 	default ARCH_ZYNQ

drivers/reset/Makefile

@@ -5,6 +5,7 @@ obj-$(CONFIG_ARCH_STI) += sti/
 obj-$(CONFIG_ARCH_TEGRA) += tegra/
 obj-$(CONFIG_RESET_A10SR) += reset-a10sr.o
 obj-$(CONFIG_RESET_ATH79) += reset-ath79.o
+obj-$(CONFIG_RESET_AXS10X) += reset-axs10x.o
 obj-$(CONFIG_RESET_BERLIN) += reset-berlin.o
 obj-$(CONFIG_RESET_HSDK) += reset-hsdk.o
 obj-$(CONFIG_RESET_IMX7) += reset-imx7.o
@@ -13,12 +14,10 @@ obj-$(CONFIG_RESET_LPC18XX) += reset-lpc18xx.o
 obj-$(CONFIG_RESET_MESON) += reset-meson.o
 obj-$(CONFIG_RESET_OXNAS) += reset-oxnas.o
 obj-$(CONFIG_RESET_PISTACHIO) += reset-pistachio.o
-obj-$(CONFIG_RESET_SOCFPGA) += reset-socfpga.o
-obj-$(CONFIG_RESET_STM32) += reset-stm32.o
+obj-$(CONFIG_RESET_SIMPLE) += reset-simple.o
 obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o
 obj-$(CONFIG_RESET_TI_SCI) += reset-ti-sci.o
 obj-$(CONFIG_RESET_TI_SYSCON) += reset-ti-syscon.o
 obj-$(CONFIG_RESET_UNIPHIER) += reset-uniphier.o
-obj-$(CONFIG_RESET_ZX2967) += reset-zx2967.o
 obj-$(CONFIG_RESET_ZYNQ) += reset-zynq.o
 

drivers/reset/reset-axs10x.c

+/*
+ * Copyright (C) 2017 Synopsys.
+ *
+ * Synopsys AXS10x reset driver.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+
+#define to_axs10x_rst(p)	container_of((p), struct axs10x_rst, rcdev)
+
+#define AXS10X_MAX_RESETS	32
+
+struct axs10x_rst {
+	void __iomem			*regs_rst;
+	spinlock_t			lock;
+	struct reset_controller_dev	rcdev;
+};
+
+static int axs10x_reset_reset(struct reset_controller_dev *rcdev,
+			      unsigned long id)
+{
+	struct axs10x_rst *rst = to_axs10x_rst(rcdev);
+	unsigned long flags;
+
+	spin_lock_irqsave(&rst->lock, flags);
+	writel(BIT(id), rst->regs_rst);
+	spin_unlock_irqrestore(&rst->lock, flags);
+
+	return 0;
+}
+
+static const struct reset_control_ops axs10x_reset_ops = {
+	.reset	= axs10x_reset_reset,
+};
+
+static int axs10x_reset_probe(struct platform_device *pdev)
+{
+	struct axs10x_rst *rst;
+	struct resource *mem;
+
+	rst = devm_kzalloc(&pdev->dev, sizeof(*rst), GFP_KERNEL);
+	if (!rst)
+		return -ENOMEM;
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	rst->regs_rst = devm_ioremap_resource(&pdev->dev, mem);
+	if (IS_ERR(rst->regs_rst))
+		return PTR_ERR(rst->regs_rst);
+
+	spin_lock_init(&rst->lock);
+
+	rst->rcdev.owner = THIS_MODULE;
+	rst->rcdev.ops = &axs10x_reset_ops;
+	rst->rcdev.of_node = pdev->dev.of_node;
+	rst->rcdev.nr_resets = AXS10X_MAX_RESETS;
+
+	return devm_reset_controller_register(&pdev->dev, &rst->rcdev);
+}
+
+static const struct of_device_id axs10x_reset_dt_match[] = {
+	{ .compatible = "snps,axs10x-reset" },
+	{ },
+};
+
+static struct platform_driver axs10x_reset_driver = {
+	.probe	= axs10x_reset_probe,
+	.driver	= {
+		.name = "axs10x-reset",
+		.of_match_table = axs10x_reset_dt_match,
+	},
+};
+builtin_platform_driver(axs10x_reset_driver);
+
+MODULE_AUTHOR("Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>");
+MODULE_DESCRIPTION("Synopsys AXS10x reset driver");
+MODULE_LICENSE("GPL v2");

drivers/reset/reset-meson.c

@@ -62,13 +62,16 @@
 #include <linux/reset-controller.h>
 #include <linux/slab.h>
 #include <linux/types.h>
+#include <linux/of_device.h>
 
 #define REG_COUNT	8
 #define BITS_PER_REG	32
+#define LEVEL_OFFSET	0x7c
 
 struct meson_reset {
 	void __iomem *reg_base;
 	struct reset_controller_dev rcdev;
+	spinlock_t lock;
 };
 
 static int meson_reset_reset(struct reset_controller_dev *rcdev,
@@ -80,26 +83,68 @@ static int meson_reset_reset(struct reset_controller_dev *rcdev,
 	unsigned int offset = id % BITS_PER_REG;
 	void __iomem *reg_addr = data->reg_base + (bank << 2);
 
-	if (bank >= REG_COUNT)
-		return -EINVAL;
-
 	writel(BIT(offset), reg_addr);
 
 	return 0;
 }
 
-static const struct reset_control_ops meson_reset_ops = {
+static int meson_reset_level(struct reset_controller_dev *rcdev,
+			    unsigned long id, bool assert)
+{
+	struct meson_reset *data =
+		container_of(rcdev, struct meson_reset, rcdev);
+	unsigned int bank = id / BITS_PER_REG;
+	unsigned int offset = id % BITS_PER_REG;
+	void __iomem *reg_addr = data->reg_base + LEVEL_OFFSET + (bank << 2);
+	unsigned long flags;
+	u32 reg;
+
+	spin_lock_irqsave(&data->lock, flags);
+
+	reg = readl(reg_addr);
+	if (assert)
+		writel(reg & ~BIT(offset), reg_addr);
+	else
+		writel(reg | BIT(offset), reg_addr);
+
+	spin_unlock_irqrestore(&data->lock, flags);
+
+	return 0;
+}
+
+static int meson_reset_assert(struct reset_controller_dev *rcdev,
+			      unsigned long id)
+{
+	return meson_reset_level(rcdev, id, true);
+}
+
+static int meson_reset_deassert(struct reset_controller_dev *rcdev,
+				unsigned long id)
+{
+	return meson_reset_level(rcdev, id, false);
+}
+
+static const struct reset_control_ops meson_reset_meson8_ops = {
 	.reset		= meson_reset_reset,
 };
 
+static const struct reset_control_ops meson_reset_gx_ops = {
+	.reset		= meson_reset_reset,
+	.assert		= meson_reset_assert,
+	.deassert	= meson_reset_deassert,
+};
+
 static const struct of_device_id meson_reset_dt_ids[] = {
-	 { .compatible = "amlogic,meson8b-reset", },
-	 { .compatible = "amlogic,meson-gxbb-reset", },
+	 { .compatible = "amlogic,meson8b-reset",
+	   .data = &meson_reset_meson8_ops, },
+	 { .compatible = "amlogic,meson-gxbb-reset",
+	   .data = &meson_reset_gx_ops, },
 	 { /* sentinel */ },
 };
 
 static int meson_reset_probe(struct platform_device *pdev)
 {
+	const struct reset_control_ops *ops;
 	struct meson_reset *data;
 	struct resource *res;
 
@@ -107,6 +152,10 @@ static int meson_reset_probe(struct platform_device *pdev)
 	if (!data)
 		return -ENOMEM;
 
+	ops = of_device_get_match_data(&pdev->dev);
+	if (!ops)
+		return -EINVAL;
+
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	data->reg_base = devm_ioremap_resource(&pdev->dev, res);
 	if (IS_ERR(data->reg_base))
@@ -114,9 +163,11 @@ static int meson_reset_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, data);
 
+	spin_lock_init(&data->lock);
+
 	data->rcdev.owner = THIS_MODULE;
 	data->rcdev.nr_resets = REG_COUNT * BITS_PER_REG;
-	data->rcdev.ops = &meson_reset_ops;
+	data->rcdev.ops = ops;
 	data->rcdev.of_node = pdev->dev.of_node;
 
 	return devm_reset_controller_register(&pdev->dev, &data->rcdev);

drivers/reset/reset-simple.c

+/*
+ * Simple Reset Controller Driver
+ *
+ * Copyright (C) 2017 Pengutronix, Philipp Zabel <kernel@pengutronix.de>
+ *
+ * Based on Allwinner SoCs Reset Controller driver
+ *
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <linux/spinlock.h>
+
+#include "reset-simple.h"
+
+static inline struct reset_simple_data *
+to_reset_simple_data(struct reset_controller_dev *rcdev)
+{
+	return container_of(rcdev, struct reset_simple_data, rcdev);
+}
+
+static int reset_simple_update(struct reset_controller_dev *rcdev,
+			       unsigned long id, bool assert)
+{
+	struct reset_simple_data *data = to_reset_simple_data(rcdev);
+	int reg_width = sizeof(u32);
+	int bank = id / (reg_width * BITS_PER_BYTE);
+	int offset = id % (reg_width * BITS_PER_BYTE);
+	unsigned long flags;
+	u32 reg;
+
+	spin_lock_irqsave(&data->lock, flags);
+
+	reg = readl(data->membase + (bank * reg_width));
+	if (assert ^ data->active_low)
+		reg |= BIT(offset);
+	else
+		reg &= ~BIT(offset);
+	writel(reg, data->membase + (bank * reg_width));
+
+	spin_unlock_irqrestore(&data->lock, flags);
+
+	return 0;
+}
+
+static int reset_simple_assert(struct reset_controller_dev *rcdev,
+			       unsigned long id)
+{
+	return reset_simple_update(rcdev, id, true);
+}
+
+static int reset_simple_deassert(struct reset_controller_dev *rcdev,
+				 unsigned long id)
+{
+	return reset_simple_update(rcdev, id, false);
+}
+
+static int reset_simple_status(struct reset_controller_dev *rcdev,
+			       unsigned long id)
+{
+	struct reset_simple_data *data = to_reset_simple_data(rcdev);
+	int reg_width = sizeof(u32);
+	int bank = id / (reg_width * BITS_PER_BYTE);
+	int offset = id % (reg_width * BITS_PER_BYTE);
+	u32 reg;
+
+	reg = readl(data->membase + (bank * reg_width));
+
+	return !(reg & BIT(offset)) ^ !data->status_active_low;
+}
+
+const struct reset_control_ops reset_simple_ops = {
+	.assert		= reset_simple_assert,
+	.deassert	= reset_simple_deassert,
+	.status		= reset_simple_status,
+};
+
+/**
+ * struct reset_simple_devdata - simple reset controller properties
+ * @reg_offset: offset between base address and first reset register.
+ * @nr_resets: number of resets. If not set, default to resource size in bits.
+ * @active_low: if true, bits are cleared to assert the reset. Otherwise, bits
+ *              are set to assert the reset.
+ * @status_active_low: if true, bits read back as cleared while the reset is
+ *                     asserted. Otherwise, bits read back as set while the
+ *                     reset is asserted.
+ */
+struct reset_simple_devdata {
+	u32 reg_offset;
+	u32 nr_resets;
+	bool active_low;
+	bool status_active_low;
+};
+
+#define SOCFPGA_NR_BANKS	8
+
+static const struct reset_simple_devdata reset_simple_socfpga = {
+	.reg_offset = 0x10,
+	.nr_resets = SOCFPGA_NR_BANKS * 32,
+	.status_active_low = true,
+};
+
+static const struct reset_simple_devdata reset_simple_active_low = {
+	.active_low = true,
+	.status_active_low = true,
+};
+
+static const struct of_device_id reset_simple_dt_ids[] = {
+	{ .compatible = "altr,rst-mgr", .data = &reset_simple_socfpga },
+	{ .compatible = "st,stm32-rcc", },
+	{ .compatible = "allwinner,sun6i-a31-clock-reset",
+		.data = &reset_simple_active_low },
+	{ .compatible = "zte,zx296718-reset",
+		.data = &reset_simple_active_low },
+	{ /* sentinel */ },
+};
+
+static int reset_simple_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	const struct reset_simple_devdata *devdata;
+	struct reset_simple_data *data;
+	void __iomem *membase;
+	struct resource *res;
+	u32 reg_offset = 0;
+
+	devdata = of_device_get_match_data(dev);
+
+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	membase = devm_ioremap_resource(dev, res);
+	if (IS_ERR(membase))
+		return PTR_ERR(membase);
+
+	spin_lock_init(&data->lock);
+	data->membase = membase;
+	data->rcdev.owner = THIS_MODULE;
+	data->rcdev.nr_resets = resource_size(res) * BITS_PER_BYTE;
+	data->rcdev.ops = &reset_simple_ops;
+	data->rcdev.of_node = dev->of_node;
+
+	if (devdata) {
+		reg_offset = devdata->reg_offset;
+		if (devdata->nr_resets)
+			data->rcdev.nr_resets = devdata->nr_resets;
+		data->active_low = devdata->active_low;
+		data->status_active_low = devdata->status_active_low;
+	}
+
+	if (of_device_is_compatible(dev->of_node, "altr,rst-mgr") &&
+	    of_property_read_u32(dev->of_node, "altr,modrst-offset",
+				 &reg_offset)) {
+		dev_warn(dev,
+			 "missing altr,modrst-offset property, assuming 0x%x!\n",
+			 reg_offset);
+	}
+
+	data->membase += reg_offset;
+
+	return devm_reset_controller_register(dev, &data->rcdev);
+}
+
+static struct platform_driver reset_simple_driver = {
+	.probe	= reset_simple_probe,
+	.driver = {
+		.name		= "simple-reset",
+		.of_match_table	= reset_simple_dt_ids,
+	},
+};
+builtin_platform_driver(reset_simple_driver);

drivers/reset/reset-simple.h

+/*
+ * Simple Reset Controller ops
+ *
+ * Based on Allwinner SoCs Reset Controller driver
+ *
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __RESET_SIMPLE_H__
+#define __RESET_SIMPLE_H__
+
+#include <linux/io.h>
+#include <linux/reset-controller.h>
+#include <linux/spinlock.h>
+
+/**
+ * struct reset_simple_data - driver data for simple reset controllers
+ * @lock: spinlock to protect registers during read-modify-write cycles
+ * @membase: memory mapped I/O register range
+ * @rcdev: reset controller device base structure
+ * @active_low: if true, bits are cleared to assert the reset. Otherwise, bits
+ *              are set to assert the reset. Note that this says nothing about
+ *              the voltage level of the actual reset line.
+ * @status_active_low: if true, bits read back as cleared while the reset is
+ *                     asserted. Otherwise, bits read back as set while the
+ *                     reset is asserted.
+ */
+struct reset_simple_data {
+	spinlock_t			lock;
+	void __iomem			*membase;
+	struct reset_controller_dev	rcdev;
+	bool				active_low;
+	bool				status_active_low;
+};
+
+extern const struct reset_control_ops reset_simple_ops;
+
+#endif /* __RESET_SIMPLE_H__ */

drivers/reset/reset-socfpga.c

-/*
- * Socfpga Reset Controller Driver
- *
- * Copyright 2014 Steffen Trumtrar <s.trumtrar@pengutronix.de>
- *
- * based on
- * Allwinner SoCs Reset Controller driver
- *
- * Copyright 2013 Maxime Ripard
- *
- * Maxime Ripard <maxime.ripard@free-electrons.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/init.h>
-#include <linux/of.h>
-#include <linux/platform_device.h>
-#include <linux/reset-controller.h>
-#include <linux/spinlock.h>
-#include <linux/types.h>
-
-#define BANK_INCREMENT		4
-#define NR_BANKS		8
-
-struct socfpga_reset_data {
-	spinlock_t			lock;
-	void __iomem			*membase;
-	struct reset_controller_dev	rcdev;
-};
-
-static int socfpga_reset_assert(struct reset_controller_dev *rcdev,
-				unsigned long id)
-{
-	struct socfpga_reset_data *data = container_of(rcdev,
-						     struct socfpga_reset_data,
-						     rcdev);
-	int reg_width = sizeof(u32);
-	int bank = id / (reg_width * BITS_PER_BYTE);
-	int offset = id % (reg_width * BITS_PER_BYTE);
-	unsigned long flags;
-	u32 reg;
-
-	spin_lock_irqsave(&data->lock, flags);
-
-	reg = readl(data->membase + (bank * BANK_INCREMENT));
-	writel(reg | BIT(offset), data->membase + (bank * BANK_INCREMENT));
-	spin_unlock_irqrestore(&data->lock, flags);
-
-	return 0;
-}
-
-static int socfpga_reset_deassert(struct reset_controller_dev *rcdev,
-				  unsigned long id)
-{
-	struct socfpga_reset_data *data = container_of(rcdev,
-						     struct socfpga_reset_data,
-						     rcdev);
-
-	int reg_width = sizeof(u32);
-	int bank = id / (reg_width * BITS_PER_BYTE);
-	int offset = id % (reg_width * BITS_PER_BYTE);
-	unsigned long flags;
-	u32 reg;
-
-	spin_lock_irqsave(&data->lock, flags);
-
-	reg = readl(data->membase + (bank * BANK_INCREMENT));
-	writel(reg & ~BIT(offset), data->membase + (bank * BANK_INCREMENT));
-
-	spin_unlock_irqrestore(&data->lock, flags);
-
-	return 0;
-}
-
-static int socfpga_reset_status(struct reset_controller_dev *rcdev,
-				unsigned long id)
-{
-	struct socfpga_reset_data *data = container_of(rcdev,
-						struct socfpga_reset_data, rcdev);
-	int reg_width = sizeof(u32);
-	int bank = id / (reg_width * BITS_PER_BYTE);
-	int offset = id % (reg_width * BITS_PER_BYTE);
-	u32 reg;
-
-	reg = readl(data->membase + (bank * BANK_INCREMENT));
-
-	return !(reg & BIT(offset));
-}
-
-static const struct reset_control_ops socfpga_reset_ops = {
-	.assert		= socfpga_reset_assert,
-	.deassert	= socfpga_reset_deassert,
-	.status		= socfpga_reset_status,
-};
-
-static int socfpga_reset_probe(struct platform_device *pdev)
-{
-	struct socfpga_reset_data *data;
-	struct resource *res;
-	struct device *dev = &pdev->dev;
-	struct device_node *np = dev->of_node;
-	u32 modrst_offset;
-
-	/*
-	 * The binding was mainlined without the required property.
-	 * Do not continue, when we encounter an old DT.
-	 */
-	if (!of_find_property(pdev->dev.of_node, "#reset-cells", NULL)) {
-		dev_err(&pdev->dev, "%pOF missing #reset-cells property\n",
-			pdev->dev.of_node);
-		return -EINVAL;
-	}
-
-	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
-	if (!data)
-		return -ENOMEM;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	data->membase = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(data->membase))
-		return PTR_ERR(data->membase);
-
-	if (of_property_read_u32(np, "altr,modrst-offset", &modrst_offset)) {
-		dev_warn(dev, "missing altr,modrst-offset property, assuming 0x10!\n");
-		modrst_offset = 0x10;
-	}
-	data->membase += modrst_offset;
-
-	spin_lock_init(&data->lock);
-
-	data->rcdev.owner = THIS_MODULE;
-	data->rcdev.nr_resets = NR_BANKS * (sizeof(u32) * BITS_PER_BYTE);
-	data->rcdev.ops = &socfpga_reset_ops;
-	data->rcdev.of_node = pdev->dev.of_node;
-
-	return devm_reset_controller_register(dev, &data->rcdev);
-}
-
-static const struct of_device_id socfpga_reset_dt_ids[] = {
-	{ .compatible = "altr,rst-mgr", },
-	{ /* sentinel */ },
-};
-
-static struct platform_driver socfpga_reset_driver = {
-	.probe	= socfpga_reset_probe,
-	.driver = {
-		.name		= "socfpga-reset",
-		.of_match_table	= socfpga_reset_dt_ids,
-	},
-};
-builtin_platform_driver(socfpga_reset_driver);

drivers/reset/reset-stm32.c

-/*
- * Copyright (C) Maxime Coquelin 2015
- * Author:  Maxime Coquelin <mcoquelin.stm32@gmail.com>
- * License terms:  GNU General Public License (GPL), version 2
- *
- * Heavily based on sunxi driver from Maxime Ripard.
- */
-
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/platform_device.h>
-#include <linux/reset-controller.h>
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/types.h>
-
-struct stm32_reset_data {
-	spinlock_t			lock;
-	void __iomem			*membase;
-	struct reset_controller_dev	rcdev;
-};
-
-static int stm32_reset_assert(struct reset_controller_dev *rcdev,
-			      unsigned long id)
-{
-	struct stm32_reset_data *data = container_of(rcdev,
-						     struct stm32_reset_data,
-						     rcdev);
-	int bank = id / BITS_PER_LONG;
-	int offset = id % BITS_PER_LONG;
-	unsigned long flags;
-	u32 reg;
-
-	spin_lock_irqsave(&data->lock, flags);
-
-	reg = readl(data->membase + (bank * 4));
-	writel(reg | BIT(offset), data->membase + (bank * 4));
-
-	spin_unlock_irqrestore(&data->lock, flags);
-
-	return 0;
-}
-
-static int stm32_reset_deassert(struct reset_controller_dev *rcdev,
-				unsigned long id)
-{
-	struct stm32_reset_data *data = container_of(rcdev,
-						     struct stm32_reset_data,
-						     rcdev);
-	int bank = id / BITS_PER_LONG;
-	int offset = id % BITS_PER_LONG;
-	unsigned long flags;
-	u32 reg;
-
-	spin_lock_irqsave(&data->lock, flags);
-
-	reg = readl(data->membase + (bank * 4));
-	writel(reg & ~BIT(offset), data->membase + (bank * 4));
-
-	spin_unlock_irqrestore(&data->lock, flags);
-
-	return 0;
-}
-
-static const struct reset_control_ops stm32_reset_ops = {
-	.assert		= stm32_reset_assert,
-	.deassert	= stm32_reset_deassert,
-};
-
-static const struct of_device_id stm32_reset_dt_ids[] = {
-	 { .compatible = "st,stm32-rcc", },
-	 { /* sentinel */ },
-};
-
-static int stm32_reset_probe(struct platform_device *pdev)
-{
-	struct stm32_reset_data *data;
-	struct resource *res;
-
-	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
-	if (!data)
-		return -ENOMEM;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	data->membase = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(data->membase))
-		return PTR_ERR(data->membase);
-
-	spin_lock_init(&data->lock);
-
-	data->rcdev.owner = THIS_MODULE;
-	data->rcdev.nr_resets = resource_size(res) * 8;
-	data->rcdev.ops = &stm32_reset_ops;
-	data->rcdev.of_node = pdev->dev.of_node;
-
-	return devm_reset_controller_register(&pdev->dev, &data->rcdev);
-}
-
-static struct platform_driver stm32_reset_driver = {
-	.probe	= stm32_reset_probe,
-	.driver = {
-		.name		= "stm32-rcc-reset",
-		.of_match_table	= stm32_reset_dt_ids,
-	},
-};
-builtin_platform_driver(stm32_reset_driver);

drivers/reset/reset-sunxi.c

@@ -22,64 +22,11 @@
 #include <linux/spinlock.h>
 #include <linux/types.h>
 
-struct sunxi_reset_data {
-	spinlock_t			lock;
-	void __iomem			*membase;
-	struct reset_controller_dev	rcdev;
-};
-
-static int sunxi_reset_assert(struct reset_controller_dev *rcdev,
-			      unsigned long id)
-{
-	struct sunxi_reset_data *data = container_of(rcdev,
-						     struct sunxi_reset_data,
-						     rcdev);
-	int reg_width = sizeof(u32);
-	int bank = id / (reg_width * BITS_PER_BYTE);
-	int offset = id % (reg_width * BITS_PER_BYTE);
-	unsigned long flags;
-	u32 reg;
-
-	spin_lock_irqsave(&data->lock, flags);
-
-	reg = readl(data->membase + (bank * reg_width));
-	writel(reg & ~BIT(offset), data->membase + (bank * reg_width));
-
-	spin_unlock_irqrestore(&data->lock, flags);
-
-	return 0;
-}
-
-static int sunxi_reset_deassert(struct reset_controller_dev *rcdev,
-				unsigned long id)
-{
-	struct sunxi_reset_data *data = container_of(rcdev,
-						     struct sunxi_reset_data,
-						     rcdev);
-	int reg_width = sizeof(u32);
-	int bank = id / (reg_width * BITS_PER_BYTE);
-	int offset = id % (reg_width * BITS_PER_BYTE);
-	unsigned long flags;
-	u32 reg;
-
-	spin_lock_irqsave(&data->lock, flags);
-
-	reg = readl(data->membase + (bank * reg_width));
-	writel(reg | BIT(offset), data->membase + (bank * reg_width));
-
-	spin_unlock_irqrestore(&data->lock, flags);
-
-	return 0;
-}
-
-static const struct reset_control_ops sunxi_reset_ops = {
-	.assert		= sunxi_reset_assert,
-	.deassert	= sunxi_reset_deassert,
-};
+#include "reset-simple.h"
 
 static int sunxi_reset_init(struct device_node *np)
 {
-	struct sunxi_reset_data *data;
+	struct reset_simple_data *data;
 	struct resource res;
 	resource_size_t size;
 	int ret;
@@ -108,8 +55,9 @@ static int sunxi_reset_init(struct device_node *np)
 
 	data->rcdev.owner = THIS_MODULE;
 	data->rcdev.nr_resets = size * 8;
-	data->rcdev.ops = &sunxi_reset_ops;
+	data->rcdev.ops = &reset_simple_ops;
 	data->rcdev.of_node = np;
+	data->active_low = true;
 
 	return reset_controller_register(&data->rcdev);
 
@@ -122,6 +70,8 @@ static int sunxi_reset_init(struct device_node *np)
  * These are the reset controller we need to initialize early on in
  * our system, before we can even think of using a regular device
  * driver for it.
+ * The controllers that we can register through the regular device
+ * model are handled by the simple reset driver directly.
  */
 static const struct of_device_id sunxi_early_reset_dt_ids[] __initconst = {
 	{ .compatible = "allwinner,sun6i-a31-ahb1-reset", },
@@ -135,45 +85,3 @@ void __init sun6i_reset_init(void)
 	for_each_matching_node(np, sunxi_early_reset_dt_ids)
 		sunxi_reset_init(np);
 }
-
-/*
- * And these are the controllers we can register through the regular
- * device model.
- */
-static const struct of_device_id sunxi_reset_dt_ids[] = {
-	 { .compatible = "allwinner,sun6i-a31-clock-reset", },
-	 { /* sentinel */ },
-};
-
-static int sunxi_reset_probe(struct platform_device *pdev)
-{
-	struct sunxi_reset_data *data;
-	struct resource *res;
-
-	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
-	if (!data)
-		return -ENOMEM;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	data->membase = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(data->membase))
-		return PTR_ERR(data->membase);
-
-	spin_lock_init(&data->lock);
-
-	data->rcdev.owner = THIS_MODULE;
-	data->rcdev.nr_resets = resource_size(res) * 8;
-	data->rcdev.ops = &sunxi_reset_ops;
-	data->rcdev.of_node = pdev->dev.of_node;
-
-	return devm_reset_controller_register(&pdev->dev, &data->rcdev);
-}
-
-static struct platform_driver sunxi_reset_driver = {
-	.probe	= sunxi_reset_probe,
-	.driver = {
-		.name		= "sunxi-reset",
-		.of_match_table	= sunxi_reset_dt_ids,
-	},
-};
-builtin_platform_driver(sunxi_reset_driver);

drivers/reset/reset-uniphier.c

@@ -58,6 +58,7 @@ static const struct uniphier_reset_data uniphier_ld4_sys_reset_data[] = {
 
 static const struct uniphier_reset_data uniphier_pro4_sys_reset_data[] = {
 	UNIPHIER_RESETX(2, 0x2000, 2),		/* NAND */
+	UNIPHIER_RESETX(6, 0x2000, 12),		/* Ether */
 	UNIPHIER_RESETX(8, 0x2000, 10),		/* STDMAC (HSC, MIO, RLE) */
 	UNIPHIER_RESETX(12, 0x2000, 6),		/* GIO (Ether, SATA, USB3) */
 	UNIPHIER_RESETX(14, 0x2000, 17),	/* USB30 */
@@ -76,6 +77,7 @@ static const struct uniphier_reset_data uniphier_pro5_sys_reset_data[] = {
 
 static const struct uniphier_reset_data uniphier_pxs2_sys_reset_data[] = {
 	UNIPHIER_RESETX(2, 0x2000, 2),		/* NAND */
+	UNIPHIER_RESETX(6, 0x2000, 12),		/* Ether */
 	UNIPHIER_RESETX(8, 0x2000, 10),		/* STDMAC (HSC, RLE) */
 	UNIPHIER_RESETX(14, 0x2000, 17),	/* USB30 */
 	UNIPHIER_RESETX(15, 0x2004, 17),	/* USB31 */
@@ -92,6 +94,7 @@ static const struct uniphier_reset_data uniphier_pxs2_sys_reset_data[] = {
 static const struct uniphier_reset_data uniphier_ld11_sys_reset_data[] = {
 	UNIPHIER_RESETX(2, 0x200c, 0),		/* NAND */
 	UNIPHIER_RESETX(4, 0x200c, 2),		/* eMMC */
+	UNIPHIER_RESETX(6, 0x200c, 6),		/* Ether */
 	UNIPHIER_RESETX(8, 0x200c, 8),		/* STDMAC (HSC, MIO) */
 	UNIPHIER_RESETX(40, 0x2008, 0),		/* AIO */
 	UNIPHIER_RESETX(41, 0x2008, 1),		/* EVEA */
@@ -102,6 +105,7 @@ static const struct uniphier_reset_data uniphier_ld11_sys_reset_data[] = {
 static const struct uniphier_reset_data uniphier_ld20_sys_reset_data[] = {
 	UNIPHIER_RESETX(2, 0x200c, 0),		/* NAND */
 	UNIPHIER_RESETX(4, 0x200c, 2),		/* eMMC */
+	UNIPHIER_RESETX(6, 0x200c, 6),		/* Ether */
 	UNIPHIER_RESETX(8, 0x200c, 8),		/* STDMAC (HSC) */
 	UNIPHIER_RESETX(12, 0x200c, 5),		/* GIO (PCIe, USB3) */
 	UNIPHIER_RESETX(16, 0x200c, 12),	/* USB30-PHY0 */
@@ -114,6 +118,20 @@ static const struct uniphier_reset_data uniphier_ld20_sys_reset_data[] = {
 	UNIPHIER_RESET_END,
 };
 
+static const struct uniphier_reset_data uniphier_pxs3_sys_reset_data[] = {
+	UNIPHIER_RESETX(2, 0x200c, 0),		/* NAND */
+	UNIPHIER_RESETX(4, 0x200c, 2),		/* eMMC */
+	UNIPHIER_RESETX(8, 0x200c, 12),		/* STDMAC */
+	UNIPHIER_RESETX(12, 0x200c, 4),		/* USB30 link (GIO0) */
+	UNIPHIER_RESETX(13, 0x200c, 5),		/* USB31 link (GIO1) */
+	UNIPHIER_RESETX(16, 0x200c, 16),	/* USB30-PHY0 */
+	UNIPHIER_RESETX(17, 0x200c, 18),	/* USB30-PHY1 */
+	UNIPHIER_RESETX(18, 0x200c, 20),	/* USB30-PHY2 */
+	UNIPHIER_RESETX(20, 0x200c, 17),	/* USB31-PHY0 */
+	UNIPHIER_RESETX(21, 0x200c, 19),	/* USB31-PHY1 */
+	UNIPHIER_RESET_END,
+};
+
 /* Media I/O reset data */
 #define UNIPHIER_MIO_RESET_SD(id, ch)			\
 	UNIPHIER_RESETX((id), 0x110 + 0x200 * (ch), 0)
@@ -359,6 +377,10 @@ static const struct of_device_id uniphier_reset_match[] = {
 		.compatible = "socionext,uniphier-ld20-reset",
 		.data = uniphier_ld20_sys_reset_data,
 	},
+	{
+		.compatible = "socionext,uniphier-pxs3-reset",
+		.data = uniphier_pxs3_sys_reset_data,
+	},
 	/* Media I/O reset, SD reset */
 	{
 		.compatible = "socionext,uniphier-ld4-mio-reset",
@@ -392,6 +414,10 @@ static const struct of_device_id uniphier_reset_match[] = {
 		.compatible = "socionext,uniphier-ld20-sd-reset",
 		.data = uniphier_pro5_sd_reset_data,
 	},
+	{
+		.compatible = "socionext,uniphier-pxs3-sd-reset",
+		.data = uniphier_pro5_sd_reset_data,
+	},
 	/* Peripheral reset */
 	{
 		.compatible = "socionext,uniphier-ld4-peri-reset",
@@ -421,6 +447,10 @@ static const struct of_device_id uniphier_reset_match[] = {
 		.compatible = "socionext,uniphier-ld20-peri-reset",
 		.data = uniphier_pro4_peri_reset_data,
 	},
+	{
+		.compatible = "socionext,uniphier-pxs3-peri-reset",
+		.data = uniphier_pro4_peri_reset_data,
+	},
 	/* Analog signal amplifiers reset */
 	{
 		.compatible = "socionext,uniphier-ld11-adamv-reset",

drivers/reset/reset-zx2967.c

-/*
- * ZTE's zx2967 family reset controller driver
- *
- * Copyright (C) 2017 ZTE Ltd.
- *
- * Author: Baoyou Xie <baoyou.xie@linaro.org>
- *
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#include <linux/of_address.h>
-#include <linux/platform_device.h>
-#include <linux/reset-controller.h>
-
-struct zx2967_reset {
-	void __iomem			*reg_base;
-	spinlock_t			lock;
-	struct reset_controller_dev	rcdev;
-};
-
-static int zx2967_reset_act(struct reset_controller_dev *rcdev,
-			    unsigned long id, bool assert)
-{
-	struct zx2967_reset *reset = NULL;
-	int bank = id / 32;
-	int offset = id % 32;
-	u32 reg;
-	unsigned long flags;
-
-	reset = container_of(rcdev, struct zx2967_reset, rcdev);
-
-	spin_lock_irqsave(&reset->lock, flags);
-
-	reg = readl_relaxed(reset->reg_base + (bank * 4));
-	if (assert)
-		reg &= ~BIT(offset);
-	else
-		reg |= BIT(offset);
-	writel_relaxed(reg, reset->reg_base + (bank * 4));
-
-	spin_unlock_irqrestore(&reset->lock, flags);
-
-	return 0;
-}
-
-static int zx2967_reset_assert(struct reset_controller_dev *rcdev,
-			       unsigned long id)
-{
-	return zx2967_reset_act(rcdev, id, true);
-}
-
-static int zx2967_reset_deassert(struct reset_controller_dev *rcdev,
-				 unsigned long id)
-{
-	return zx2967_reset_act(rcdev, id, false);
-}
-
-static const struct reset_control_ops zx2967_reset_ops = {
-	.assert		= zx2967_reset_assert,
-	.deassert	= zx2967_reset_deassert,
-};
-
-static int zx2967_reset_probe(struct platform_device *pdev)
-{
-	struct zx2967_reset *reset;
-	struct resource *res;
-
-	reset = devm_kzalloc(&pdev->dev, sizeof(*reset), GFP_KERNEL);
-	if (!reset)
-		return -ENOMEM;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	reset->reg_base = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(reset->reg_base))
-		return PTR_ERR(reset->reg_base);
-
-	spin_lock_init(&reset->lock);
-
-	reset->rcdev.owner = THIS_MODULE;
-	reset->rcdev.nr_resets = resource_size(res) * 8;
-	reset->rcdev.ops = &zx2967_reset_ops;
-	reset->rcdev.of_node = pdev->dev.of_node;
-
-	return devm_reset_controller_register(&pdev->dev, &reset->rcdev);
-}
-
-static const struct of_device_id zx2967_reset_dt_ids[] = {
-	 { .compatible = "zte,zx296718-reset", },
-	 {},
-};
-
-static struct platform_driver zx2967_reset_driver = {
-	.probe	= zx2967_reset_probe,
-	.driver = {
-		.name		= "zx2967-reset",
-		.of_match_table	= zx2967_reset_dt_ids,
-	},
-};
-builtin_platform_driver(zx2967_reset_driver);

drivers/soc/Makefile

@@ -11,7 +11,7 @@ obj-$(CONFIG_MACH_DOVE)		+= dove/
 obj-y				+= fsl/
 obj-$(CONFIG_ARCH_MXC)		+= imx/
 obj-$(CONFIG_SOC_XWAY)		+= lantiq/
-obj-$(CONFIG_ARCH_MEDIATEK)	+= mediatek/
+obj-y				+= mediatek/
 obj-$(CONFIG_ARCH_MESON)	+= amlogic/
 obj-$(CONFIG_ARCH_QCOM)		+= qcom/
 obj-y				+= renesas/

drivers/soc/amlogic/Kconfig

@@ -9,4 +9,25 @@ config MESON_GX_SOCINFO
 	  Say yes to support decoding of Amlogic Meson GX SoC family
 	  information about the type, package and version.
 
+config MESON_GX_PM_DOMAINS
+	bool "Amlogic Meson GX Power Domains driver"
+	depends on ARCH_MESON || COMPILE_TEST
+	depends on PM && OF
+	default ARCH_MESON
+	select PM_GENERIC_DOMAINS
+	select PM_GENERIC_DOMAINS_OF
+	help
+	  Say yes to expose Amlogic Meson GX Power Domains as
+	  Generic Power Domains.
+
+config MESON_MX_SOCINFO
+	bool "Amlogic Meson MX SoC Information driver"
+	depends on ARCH_MESON || COMPILE_TEST
+	default ARCH_MESON
+	select SOC_BUS
+	help
+	  Say yes to support decoding of Amlogic Meson6, Meson8,
+	  Meson8b and Meson8m2 SoC family information about the type
+	  and version.
+
 endmenu

drivers/soc/amlogic/Makefile

 obj-$(CONFIG_MESON_GX_SOCINFO) += meson-gx-socinfo.o
+obj-$(CONFIG_MESON_GX_PM_DOMAINS) += meson-gx-pwrc-vpu.o
+obj-$(CONFIG_MESON_MX_SOCINFO) += meson-mx-socinfo.o

drivers/soc/amlogic/meson-gx-pwrc-vpu.c

+/*
+ * Copyright (c) 2017 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+#include <linux/bitfield.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+#include <linux/reset.h>
+#include <linux/clk.h>
+
+/* AO Offsets */
+
+#define AO_RTI_GEN_PWR_SLEEP0		(0x3a << 2)
+
+#define GEN_PWR_VPU_HDMI		BIT(8)
+#define GEN_PWR_VPU_HDMI_ISO		BIT(9)
+
+/* HHI Offsets */
+
+#define HHI_MEM_PD_REG0			(0x40 << 2)
+#define HHI_VPU_MEM_PD_REG0		(0x41 << 2)
+#define HHI_VPU_MEM_PD_REG1		(0x42 << 2)
+
+struct meson_gx_pwrc_vpu {
+	struct generic_pm_domain genpd;
+	struct regmap *regmap_ao;
+	struct regmap *regmap_hhi;
+	struct reset_control *rstc;
+	struct clk *vpu_clk;
+	struct clk *vapb_clk;
+};
+
+static inline
+struct meson_gx_pwrc_vpu *genpd_to_pd(struct generic_pm_domain *d)
+{
+	return container_of(d, struct meson_gx_pwrc_vpu, genpd);
+}
+
+static int meson_gx_pwrc_vpu_power_off(struct generic_pm_domain *genpd)
+{
+	struct meson_gx_pwrc_vpu *pd = genpd_to_pd(genpd);
+	int i;
+
+	regmap_update_bits(pd->regmap_ao, AO_RTI_GEN_PWR_SLEEP0,
+			   GEN_PWR_VPU_HDMI_ISO, GEN_PWR_VPU_HDMI_ISO);
+	udelay(20);
+
+	/* Power Down Memories */
+	for (i = 0; i < 32; i += 2) {
+		regmap_update_bits(pd->regmap_hhi, HHI_VPU_MEM_PD_REG0,
+				   0x2 << i, 0x3 << i);
+		udelay(5);
+	}
+	for (i = 0; i < 32; i += 2) {
+		regmap_update_bits(pd->regmap_hhi, HHI_VPU_MEM_PD_REG1,
+				   0x2 << i, 0x3 << i);
+		udelay(5);
+	}
+	for (i = 8; i < 16; i++) {
+		regmap_update_bits(pd->regmap_hhi, HHI_MEM_PD_REG0,
+				   BIT(i), BIT(i));
+		udelay(5);
+	}
+	udelay(20);
+
+	regmap_update_bits(pd->regmap_ao, AO_RTI_GEN_PWR_SLEEP0,
+			   GEN_PWR_VPU_HDMI, GEN_PWR_VPU_HDMI);
+
+	msleep(20);
+
+	clk_disable_unprepare(pd->vpu_clk);
+	clk_disable_unprepare(pd->vapb_clk);
+
+	return 0;
+}
+
+static int meson_gx_pwrc_vpu_setup_clk(struct meson_gx_pwrc_vpu *pd)
+{
+	int ret;
+
+	ret = clk_prepare_enable(pd->vpu_clk);
+	if (ret)
+		return ret;
+
+	ret = clk_prepare_enable(pd->vapb_clk);
+	if (ret)
+		clk_disable_unprepare(pd->vpu_clk);
+
+	return ret;
+}
+
+static int meson_gx_pwrc_vpu_power_on(struct generic_pm_domain *genpd)
+{
+	struct meson_gx_pwrc_vpu *pd = genpd_to_pd(genpd);
+	int ret;
+	int i;
+
+	regmap_update_bits(pd->regmap_ao, AO_RTI_GEN_PWR_SLEEP0,
+			   GEN_PWR_VPU_HDMI, 0);
+	udelay(20);
+
+	/* Power Up Memories */
+	for (i = 0; i < 32; i += 2) {
+		regmap_update_bits(pd->regmap_hhi, HHI_VPU_MEM_PD_REG0,
+				   0x2 << i, 0);
+		udelay(5);
+	}
+
+	for (i = 0; i < 32; i += 2) {
+		regmap_update_bits(pd->regmap_hhi, HHI_VPU_MEM_PD_REG1,
+				   0x2 << i, 0);
+		udelay(5);
+	}
+
+	for (i = 8; i < 16; i++) {
+		regmap_update_bits(pd->regmap_hhi, HHI_MEM_PD_REG0,
+				   BIT(i), 0);
+		udelay(5);
+	}
+	udelay(20);
+
+	ret = reset_control_assert(pd->rstc);
+	if (ret)
+		return ret;
+
+	regmap_update_bits(pd->regmap_ao, AO_RTI_GEN_PWR_SLEEP0,
+			   GEN_PWR_VPU_HDMI_ISO, 0);
+
+	ret = reset_control_deassert(pd->rstc);
+	if (ret)
+		return ret;
+
+	ret = meson_gx_pwrc_vpu_setup_clk(pd);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static bool meson_gx_pwrc_vpu_get_power(struct meson_gx_pwrc_vpu *pd)
+{
+	u32 reg;
+
+	regmap_read(pd->regmap_ao, AO_RTI_GEN_PWR_SLEEP0, &reg);
+
+	return (reg & GEN_PWR_VPU_HDMI);
+}
+
+static struct meson_gx_pwrc_vpu vpu_hdmi_pd = {
+	.genpd = {
+		.name = "vpu_hdmi",
+		.power_off = meson_gx_pwrc_vpu_power_off,
+		.power_on = meson_gx_pwrc_vpu_power_on,
+	},
+};
+
+static int meson_gx_pwrc_vpu_probe(struct platform_device *pdev)
+{
+	struct regmap *regmap_ao, *regmap_hhi;
+	struct reset_control *rstc;
+	struct clk *vpu_clk;
+	struct clk *vapb_clk;
+	bool powered_off;
+	int ret;
+
+	regmap_ao = syscon_node_to_regmap(of_get_parent(pdev->dev.of_node));
+	if (IS_ERR(regmap_ao)) {
+		dev_err(&pdev->dev, "failed to get regmap\n");
+		return PTR_ERR(regmap_ao);
+	}
+
+	regmap_hhi = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
+						     "amlogic,hhi-sysctrl");
+	if (IS_ERR(regmap_hhi)) {
+		dev_err(&pdev->dev, "failed to get HHI regmap\n");
+		return PTR_ERR(regmap_hhi);
+	}
+
+	rstc = devm_reset_control_array_get(&pdev->dev, false, false);
+	if (IS_ERR(rstc)) {
+		dev_err(&pdev->dev, "failed to get reset lines\n");
+		return PTR_ERR(rstc);
+	}
+
+	vpu_clk = devm_clk_get(&pdev->dev, "vpu");
+	if (IS_ERR(vpu_clk)) {
+		dev_err(&pdev->dev, "vpu clock request failed\n");
+		return PTR_ERR(vpu_clk);
+	}
+
+	vapb_clk = devm_clk_get(&pdev->dev, "vapb");
+	if (IS_ERR(vapb_clk)) {
+		dev_err(&pdev->dev, "vapb clock request failed\n");
+		return PTR_ERR(vapb_clk);
+	}
+
+	vpu_hdmi_pd.regmap_ao = regmap_ao;
+	vpu_hdmi_pd.regmap_hhi = regmap_hhi;
+	vpu_hdmi_pd.rstc = rstc;
+	vpu_hdmi_pd.vpu_clk = vpu_clk;
+	vpu_hdmi_pd.vapb_clk = vapb_clk;
+
+	powered_off = meson_gx_pwrc_vpu_get_power(&vpu_hdmi_pd);
+
+	/* If already powered, sync the clock states */
+	if (!powered_off) {
+		ret = meson_gx_pwrc_vpu_setup_clk(&vpu_hdmi_pd);
+		if (ret)
+			return ret;
+	}
+
+	pm_genpd_init(&vpu_hdmi_pd.genpd, &pm_domain_always_on_gov,
+		      powered_off);
+
+	return of_genpd_add_provider_simple(pdev->dev.of_node,
+					    &vpu_hdmi_pd.genpd);
+}
+
+static void meson_gx_pwrc_vpu_shutdown(struct platform_device *pdev)
+{
+	meson_gx_pwrc_vpu_power_off(&vpu_hdmi_pd.genpd);
+}
+
+static const struct of_device_id meson_gx_pwrc_vpu_match_table[] = {
+	{ .compatible = "amlogic,meson-gx-pwrc-vpu" },
+	{ /* sentinel */ }
+};
+
+static struct platform_driver meson_gx_pwrc_vpu_driver = {
+	.probe	= meson_gx_pwrc_vpu_probe,
+	.shutdown = meson_gx_pwrc_vpu_shutdown,
+	.driver = {
+		.name		= "meson_gx_pwrc_vpu",
+		.of_match_table	= meson_gx_pwrc_vpu_match_table,
+	},
+};
+builtin_platform_driver(meson_gx_pwrc_vpu_driver);

drivers/soc/amlogic/meson-mx-socinfo.c

+/*
+ * Copyright (c) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/sys_soc.h>
+#include <linux/bitfield.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+
+#define MESON_SOCINFO_MAJOR_VER_MESON6		0x16
+#define MESON_SOCINFO_MAJOR_VER_MESON8		0x19
+#define MESON_SOCINFO_MAJOR_VER_MESON8B		0x1b
+
+#define MESON_MX_ASSIST_HW_REV			0x14c
+
+#define MESON_MX_ANALOG_TOP_METAL_REVISION	0x0
+
+#define MESON_MX_BOOTROM_MISC_VER		0x4
+
+static const char *meson_mx_socinfo_revision(unsigned int major_ver,
+					     unsigned int misc_ver,
+					     unsigned int metal_rev)
+{
+	unsigned int minor_ver;
+
+	switch (major_ver) {
+	case MESON_SOCINFO_MAJOR_VER_MESON6:
+		minor_ver = 0xa;
+		break;
+
+	case MESON_SOCINFO_MAJOR_VER_MESON8:
+		if (metal_rev == 0x11111112)
+			major_ver = 0x1d;
+
+		if (metal_rev == 0x11111111 || metal_rev == 0x11111112)
+			minor_ver = 0xa;
+		else if (metal_rev == 0x11111113)
+			minor_ver = 0xb;
+		else if (metal_rev == 0x11111133)
+			minor_ver = 0xc;
+		else
+			minor_ver = 0xd;
+
+		break;
+
+	case MESON_SOCINFO_MAJOR_VER_MESON8B:
+		if (metal_rev == 0x11111111)
+			minor_ver = 0xa;
+		else
+			minor_ver = 0xb;
+
+		break;
+
+	default:
+		minor_ver = 0x0;
+		break;
+	}
+
+	return kasprintf(GFP_KERNEL, "Rev%X (%x - 0:%X)", minor_ver, major_ver,
+			 misc_ver);
+}
+
+static const char *meson_mx_socinfo_soc_id(unsigned int major_ver,
+					   unsigned int metal_rev)
+{
+	const char *soc_id;
+
+	switch (major_ver) {
+	case MESON_SOCINFO_MAJOR_VER_MESON6:
+		soc_id = "Meson6 (AML8726-MX)";
+		break;
+
+	case MESON_SOCINFO_MAJOR_VER_MESON8:
+		if (metal_rev == 0x11111112)
+			soc_id = "Meson8m2 (S812)";
+		else
+			soc_id = "Meson8 (S802)";
+
+		break;
+
+	case MESON_SOCINFO_MAJOR_VER_MESON8B:
+		soc_id = "Meson8b (S805)";
+		break;
+
+	default:
+		soc_id = "Unknown";
+		break;
+	}
+
+	return kstrdup_const(soc_id, GFP_KERNEL);
+}
+
+static const struct of_device_id meson_mx_socinfo_analog_top_ids[] = {
+	{ .compatible = "amlogic,meson8-analog-top", },
+	{ .compatible = "amlogic,meson8b-analog-top", },
+	{ /* sentinel */ }
+};
+
+int __init meson_mx_socinfo_init(void)
+{
+	struct soc_device_attribute *soc_dev_attr;
+	struct soc_device *soc_dev;
+	struct device_node *np;
+	struct regmap *assist_regmap, *bootrom_regmap, *analog_top_regmap;
+	unsigned int major_ver, misc_ver, metal_rev = 0;
+	int ret;
+
+	assist_regmap =
+		syscon_regmap_lookup_by_compatible("amlogic,meson-mx-assist");
+	if (IS_ERR(assist_regmap))
+		return PTR_ERR(assist_regmap);
+
+	bootrom_regmap =
+		syscon_regmap_lookup_by_compatible("amlogic,meson-mx-bootrom");
+	if (IS_ERR(bootrom_regmap))
+		return PTR_ERR(bootrom_regmap);
+
+	np = of_find_matching_node(NULL, meson_mx_socinfo_analog_top_ids);
+	if (np) {
+		analog_top_regmap = syscon_node_to_regmap(np);
+		if (IS_ERR(analog_top_regmap))
+			return PTR_ERR(analog_top_regmap);
+
+		ret = regmap_read(analog_top_regmap,
+				  MESON_MX_ANALOG_TOP_METAL_REVISION,
+				  &metal_rev);
+		if (ret)
+			return ret;
+	}
+
+	ret = regmap_read(assist_regmap, MESON_MX_ASSIST_HW_REV, &major_ver);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_read(bootrom_regmap, MESON_MX_BOOTROM_MISC_VER,
+			  &misc_ver);
+	if (ret < 0)
+		return ret;
+
+	soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
+	if (!soc_dev_attr)
+		return -ENODEV;
+
+	soc_dev_attr->family = "Amlogic Meson";
+
+	np = of_find_node_by_path("/");
+	of_property_read_string(np, "model", &soc_dev_attr->machine);
+	of_node_put(np);
+
+	soc_dev_attr->revision = meson_mx_socinfo_revision(major_ver, misc_ver,
+							   metal_rev);
+	soc_dev_attr->soc_id = meson_mx_socinfo_soc_id(major_ver, metal_rev);
+
+	soc_dev = soc_device_register(soc_dev_attr);
+	if (IS_ERR(soc_dev)) {
+		kfree_const(soc_dev_attr->revision);
+		kfree_const(soc_dev_attr->soc_id);
+		kfree(soc_dev_attr);
+		return PTR_ERR(soc_dev);
+	}
+
+	dev_info(soc_device_to_device(soc_dev), "Amlogic %s %s detected\n",
+		 soc_dev_attr->soc_id, soc_dev_attr->revision);
+
+	return 0;
+}
+device_initcall(meson_mx_socinfo_init);

drivers/soc/atmel/soc.c

@@ -72,6 +72,8 @@ static const struct at91_soc __initconst socs[] = {
 		 "sama5d21", "sama5d2"),
 	AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D22CU_EXID_MATCH,
 		 "sama5d22", "sama5d2"),
+	AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D225C_D1M_EXID_MATCH,
+		 "sama5d225c 16MiB SiP", "sama5d2"),
 	AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D23CU_EXID_MATCH,
 		 "sama5d23", "sama5d2"),
 	AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D24CX_EXID_MATCH,
@@ -84,10 +86,16 @@ static const struct at91_soc __initconst socs[] = {
 		 "sama5d27", "sama5d2"),
 	AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D27CN_EXID_MATCH,
 		 "sama5d27", "sama5d2"),
+	AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D27C_D1G_EXID_MATCH,
+		 "sama5d27c 128MiB SiP", "sama5d2"),
+	AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D27C_D5M_EXID_MATCH,
+		 "sama5d27c 64MiB SiP", "sama5d2"),
 	AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D28CU_EXID_MATCH,
 		 "sama5d28", "sama5d2"),
 	AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D28CN_EXID_MATCH,
 		 "sama5d28", "sama5d2"),
+	AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D28C_D1G_EXID_MATCH,
+		 "sama5d28c 128MiB SiP", "sama5d2"),
 	AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D31_EXID_MATCH,
 		 "sama5d31", "sama5d3"),
 	AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D33_EXID_MATCH,

drivers/soc/atmel/soc.h

@@ -64,14 +64,18 @@ at91_soc_init(const struct at91_soc *socs);
 
 #define SAMA5D2_CIDR_MATCH		0x0a5c08c0
 #define SAMA5D21CU_EXID_MATCH		0x0000005a
+#define SAMA5D225C_D1M_EXID_MATCH	0x00000053
 #define SAMA5D22CU_EXID_MATCH		0x00000059
 #define SAMA5D22CN_EXID_MATCH		0x00000069
 #define SAMA5D23CU_EXID_MATCH		0x00000058
 #define SAMA5D24CX_EXID_MATCH		0x00000004
 #define SAMA5D24CU_EXID_MATCH		0x00000014
 #define SAMA5D26CU_EXID_MATCH		0x00000012
+#define SAMA5D27C_D1G_EXID_MATCH	0x00000033
+#define SAMA5D27C_D5M_EXID_MATCH	0x00000032
 #define SAMA5D27CU_EXID_MATCH		0x00000011
 #define SAMA5D27CN_EXID_MATCH		0x00000021
+#define SAMA5D28C_D1G_EXID_MATCH	0x00000013
 #define SAMA5D28CU_EXID_MATCH		0x00000010
 #define SAMA5D28CN_EXID_MATCH		0x00000020
 

drivers/soc/bcm/Kconfig

@@ -20,4 +20,6 @@ config SOC_BRCMSTB
 
 	  If unsure, say N.
 
+source "drivers/soc/bcm/brcmstb/Kconfig"
+
 endmenu

drivers/soc/bcm/brcmstb/Kconfig

+if SOC_BRCMSTB
+
+config BRCMSTB_PM
+	bool "Support suspend/resume for STB platforms"
+	default y
+	depends on PM
+	depends on ARCH_BRCMSTB || BMIPS_GENERIC
+	select ARM_CPU_SUSPEND if ARM
+
+endif # SOC_BRCMSTB

drivers/soc/bcm/brcmstb/Makefile

 obj-y				+= common.o biuctrl.o
+obj-$(CONFIG_BRCMSTB_PM)	+= pm/

drivers/soc/bcm/brcmstb/pm/Makefile

+obj-$(CONFIG_ARM)		+= s2-arm.o pm-arm.o
+AFLAGS_s2-arm.o			:= -march=armv7-a
+obj-$(CONFIG_BMIPS_GENERIC)	+= s2-mips.o s3-mips.o pm-mips.o

drivers/soc/bcm/brcmstb/pm/aon_defs.h

+/*
+ * Always ON (AON) register interface between bootloader and Linux
+ *
+ * Copyright © 2014-2017 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __BRCMSTB_AON_DEFS_H__
+#define __BRCMSTB_AON_DEFS_H__
+
+#include <linux/compiler.h>
+
+/* Magic number in upper 16-bits */
+#define BRCMSTB_S3_MAGIC_MASK                   0xffff0000
+#define BRCMSTB_S3_MAGIC_SHORT                  0x5AFE0000
+
+enum {
+	/* Restore random key for AES memory verification (off = fixed key) */
+	S3_FLAG_LOAD_RANDKEY		= (1 << 0),
+
+	/* Scratch buffer page table is present */
+	S3_FLAG_SCRATCH_BUFFER_TABLE	= (1 << 1),
+
+	/* Skip all memory verification */
+	S3_FLAG_NO_MEM_VERIFY		= (1 << 2),
+
+	/*
+	 * Modification of this bit reserved for bootloader only.
+	 * 1=PSCI started Linux, 0=Direct jump to Linux.
+	 */
+	S3_FLAG_PSCI_BOOT		= (1 << 3),
+
+	/*
+	 * Modification of this bit reserved for bootloader only.
+	 * 1=64 bit boot, 0=32 bit boot.
+	 */
+	S3_FLAG_BOOTED64		= (1 << 4),
+};
+
+#define BRCMSTB_HASH_LEN			(128 / 8) /* 128-bit hash */
+
+#define AON_REG_MAGIC_FLAGS			0x00
+#define AON_REG_CONTROL_LOW			0x04
+#define AON_REG_CONTROL_HIGH			0x08
+#define AON_REG_S3_HASH				0x0c /* hash of S3 params */
+#define AON_REG_CONTROL_HASH_LEN		0x1c
+#define AON_REG_PANIC				0x20
+
+#define BRCMSTB_S3_MAGIC		0x5AFEB007
+#define BRCMSTB_PANIC_MAGIC		0x512E115E
+#define BOOTLOADER_SCRATCH_SIZE		64
+#define BRCMSTB_DTU_STATE_MAP_ENTRIES	(8*1024)
+#define BRCMSTB_DTU_CONFIG_ENTRIES	(512)
+#define BRCMSTB_DTU_COUNT		(2)
+
+#define IMAGE_DESCRIPTORS_BUFSIZE	(2 * 1024)
+#define S3_BOOTLOADER_RESERVED		(S3_FLAG_PSCI_BOOT | S3_FLAG_BOOTED64)
+
+struct brcmstb_bootloader_dtu_table {
+	uint32_t	dtu_state_map[BRCMSTB_DTU_STATE_MAP_ENTRIES];
+	uint32_t	dtu_config[BRCMSTB_DTU_CONFIG_ENTRIES];
+};
+
+/*
+ * Bootloader utilizes a custom parameter block left in DRAM for handling S3
+ * warm resume
+ */
+struct brcmstb_s3_params {
+	/* scratch memory for bootloader */
+	uint8_t scratch[BOOTLOADER_SCRATCH_SIZE];
+
+	uint32_t magic; /* BRCMSTB_S3_MAGIC */
+	uint64_t reentry; /* PA */
+
+	/* descriptors */
+	uint32_t hash[BRCMSTB_HASH_LEN / 4];
+
+	/*
+	 * If 0, then ignore this parameter (there is only one set of
+	 *   descriptors)
+	 *
+	 * If non-0, then a second set of descriptors is stored at:
+	 *
+	 *   descriptors + desc_offset_2
+	 *
+	 * The MAC result of both descriptors is XOR'd and stored in @hash
+	 */
+	uint32_t desc_offset_2;
+
+	/*
+	 * (Physical) address of a brcmstb_bootloader_scratch_table, for
+	 * providing a large DRAM buffer to the bootloader
+	 */
+	uint64_t buffer_table;
+
+	uint32_t spare[70];
+
+	uint8_t descriptors[IMAGE_DESCRIPTORS_BUFSIZE];
+	/*
+	 * Must be last member of struct. See brcmstb_pm_s3_finish() for reason.
+	 */
+	struct brcmstb_bootloader_dtu_table dtu[BRCMSTB_DTU_COUNT];
+} __packed;
+
+#endif /* __BRCMSTB_AON_DEFS_H__ */

drivers/soc/bcm/brcmstb/pm/pm.h

+/*
+ * Definitions for Broadcom STB power management / Always ON (AON) block
+ *
+ * Copyright © 2016-2017 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __BRCMSTB_PM_H__
+#define __BRCMSTB_PM_H__
+
+#define AON_CTRL_RESET_CTRL		0x00
+#define AON_CTRL_PM_CTRL		0x04
+#define AON_CTRL_PM_STATUS		0x08
+#define AON_CTRL_PM_CPU_WAIT_COUNT	0x10
+#define AON_CTRL_PM_INITIATE		0x88
+#define AON_CTRL_HOST_MISC_CMDS		0x8c
+#define AON_CTRL_SYSTEM_DATA_RAM_OFS	0x200
+
+/* MIPS PM constants */
+/* MEMC0 offsets */
+#define DDR40_PHY_CONTROL_REGS_0_PLL_STATUS	0x10
+#define DDR40_PHY_CONTROL_REGS_0_STANDBY_CTRL	0xa4
+
+/* TIMER offsets */
+#define TIMER_TIMER1_CTRL		0x0c
+#define TIMER_TIMER1_STAT		0x1c
+
+/* TIMER defines */
+#define RESET_TIMER			0x0
+#define START_TIMER			0xbfffffff
+#define TIMER_MASK			0x3fffffff
+
+/* PM_CTRL bitfield (Method #0) */
+#define PM_FAST_PWRDOWN			(1 << 6)
+#define PM_WARM_BOOT			(1 << 5)
+#define PM_DEEP_STANDBY			(1 << 4)
+#define PM_CPU_PWR			(1 << 3)
+#define PM_USE_CPU_RDY			(1 << 2)
+#define PM_PLL_PWRDOWN			(1 << 1)
+#define PM_PWR_DOWN			(1 << 0)
+
+/* PM_CTRL bitfield (Method #1) */
+#define PM_DPHY_STANDBY_CLEAR		(1 << 20)
+#define PM_MIN_S3_WIDTH_TIMER_BYPASS	(1 << 7)
+
+#define PM_S2_COMMAND	(PM_PLL_PWRDOWN | PM_USE_CPU_RDY | PM_PWR_DOWN)
+
+/* Method 0 bitmasks */
+#define PM_COLD_CONFIG	(PM_PLL_PWRDOWN | PM_DEEP_STANDBY)
+#define PM_WARM_CONFIG	(PM_COLD_CONFIG | PM_USE_CPU_RDY | PM_WARM_BOOT)
+
+/* Method 1 bitmask */
+#define M1_PM_WARM_CONFIG (PM_DPHY_STANDBY_CLEAR | \
+			   PM_MIN_S3_WIDTH_TIMER_BYPASS | \
+			   PM_WARM_BOOT | PM_DEEP_STANDBY | \
+			   PM_PLL_PWRDOWN | PM_PWR_DOWN)
+
+#define M1_PM_COLD_CONFIG (PM_DPHY_STANDBY_CLEAR | \
+			   PM_MIN_S3_WIDTH_TIMER_BYPASS | \
+			   PM_DEEP_STANDBY | \
+			   PM_PLL_PWRDOWN | PM_PWR_DOWN)
+
+#ifndef __ASSEMBLY__
+
+#ifndef CONFIG_MIPS
+extern const unsigned long brcmstb_pm_do_s2_sz;
+extern asmlinkage int brcmstb_pm_do_s2(void __iomem *aon_ctrl_base,
+		void __iomem *ddr_phy_pll_status);
+#else
+/* s2 asm */
+extern asmlinkage int brcm_pm_do_s2(u32 *s2_params);
+
+/* s3 asm */
+extern asmlinkage int brcm_pm_do_s3(void __iomem *aon_ctrl_base,
+		int dcache_linesz);
+extern int s3_reentry;
+#endif /* CONFIG_MIPS */
+
+#endif 
+
+#endif /* __BRCMSTB_PM_H__ */

drivers/soc/bcm/brcmstb/pm/s2-arm.S

+/*
+ * Copyright © 2014-2017 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+#include "pm.h"
+
+	.text
+	.align	3
+
+#define AON_CTRL_REG		r10
+#define DDR_PHY_STATUS_REG	r11
+
+/*
+ * r0: AON_CTRL base address
+ * r1: DDRY PHY PLL status register address
+ */
+ENTRY(brcmstb_pm_do_s2)
+	stmfd	sp!, {r4-r11, lr}
+	mov	AON_CTRL_REG, r0
+	mov	DDR_PHY_STATUS_REG, r1
+
+	/* Flush memory transactions */
+	dsb
+
+	/* Cache DDR_PHY_STATUS_REG translation */
+	ldr	r0, [DDR_PHY_STATUS_REG]
+
+	/* power down request */
+	ldr	r0, =PM_S2_COMMAND
+	ldr	r1, =0
+	str	r1, [AON_CTRL_REG, #AON_CTRL_PM_CTRL]
+	ldr	r1, [AON_CTRL_REG, #AON_CTRL_PM_CTRL]
+	str	r0, [AON_CTRL_REG, #AON_CTRL_PM_CTRL]
+	ldr	r0, [AON_CTRL_REG, #AON_CTRL_PM_CTRL]
+
+	/* Wait for interrupt */
+	wfi
+	nop
+
+	/* Bring MEMC back up */
+1:	ldr	r0, [DDR_PHY_STATUS_REG]
+	ands	r0, #1
+	beq	1b
+
+	/* Power-up handshake */
+	ldr	r0, =1
+	str	r0, [AON_CTRL_REG, #AON_CTRL_HOST_MISC_CMDS]
+	ldr	r0, [AON_CTRL_REG, #AON_CTRL_HOST_MISC_CMDS]
+
+	ldr	r0, =0
+	str	r0, [AON_CTRL_REG, #AON_CTRL_PM_CTRL]
+	ldr	r0, [AON_CTRL_REG, #AON_CTRL_PM_CTRL]
+
+	/* Return to caller */
+	ldr	r0, =0
+	ldmfd	sp!, {r4-r11, pc}
+
+	ENDPROC(brcmstb_pm_do_s2)
+
+	/* Place literal pool here */
+	.ltorg
+
+ENTRY(brcmstb_pm_do_s2_sz)
+	.word   . - brcmstb_pm_do_s2

drivers/soc/fsl/guts.c

@@ -213,6 +213,7 @@ static const struct of_device_id fsl_guts_of_match[] = {
 	{ .compatible = "fsl,ls1021a-dcfg", },
 	{ .compatible = "fsl,ls1043a-dcfg", },
 	{ .compatible = "fsl,ls2080a-dcfg", },
+	{ .compatible = "fsl,ls1088a-dcfg", },
 	{}
 };
 MODULE_DEVICE_TABLE(of, fsl_guts_of_match);

drivers/soc/fsl/qbman/Kconfig

 menuconfig FSL_DPAA
 	bool "Freescale DPAA 1.x support"
-	depends on FSL_SOC_BOOKE
+	depends on (FSL_SOC_BOOKE || ARCH_LAYERSCAPE)
 	select GENERIC_ALLOCATOR
 	help
 	  The Freescale Data Path Acceleration Architecture (DPAA) is a set of

drivers/soc/fsl/qbman/Makefile

 # SPDX-License-Identifier: GPL-2.0
 obj-$(CONFIG_FSL_DPAA)                          += bman_ccsr.o qman_ccsr.o \
 						   bman_portal.o qman_portal.o \
-						   bman.o qman.o
+						   bman.o qman.o dpaa_sys.o
 
 obj-$(CONFIG_FSL_BMAN_TEST)                     += bman-test.o
 bman-test-y                                      = bman_test.o