Commit cfb12c89 authored by Robin Gong's avatar Robin Gong Committed by Shawn Guo

arm64: dts: imx8mn-ddr4-evk: correct ldo1/ldo2 voltage range

Correct ldo1 voltage range from wrong high group(3.0V~3.3V) to low group
(1.6V~1.9V) because the ldo1 should be 1.8V. Actually, two voltage groups
have been supported at bd718x7-regulator driver, hence, just corrrect the
voltage range to 1.6V~3.3V. For ldo2@0.8V, correct voltage range too.
Otherwise, ldo1 would be kept @3.0V and ldo2@0.9V which violate i.mx8mn
datasheet as the below warning log in kernel:

[    0.995524] LDO1: Bringing 1800000uV into 3000000-3000000uV
[    0.999196] LDO2: Bringing 800000uV into 900000-900000uV

Fixes: 3e44dd09 ("arm64: dts: imx8mn-ddr4-evk: Add rohm,bd71847 PMIC support")
Cc: stable@vger.kernel.org
Signed-off-by: default avatarRobin Gong <yibin.gong@nxp.com>
Reviewed-by: default avatarDong Aisheng <aisheng.dong@nxp.com>
Reviewed-by: default avatarFabio Estevam <festevam@gmail.com>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent 4fd6b573
...@@ -113,7 +113,7 @@ buck6_reg: BUCK6 { ...@@ -113,7 +113,7 @@ buck6_reg: BUCK6 {
ldo1_reg: LDO1 { ldo1_reg: LDO1 {
regulator-name = "LDO1"; regulator-name = "LDO1";
regulator-min-microvolt = <3000000>; regulator-min-microvolt = <1600000>;
regulator-max-microvolt = <3300000>; regulator-max-microvolt = <3300000>;
regulator-boot-on; regulator-boot-on;
regulator-always-on; regulator-always-on;
...@@ -121,7 +121,7 @@ ldo1_reg: LDO1 { ...@@ -121,7 +121,7 @@ ldo1_reg: LDO1 {
ldo2_reg: LDO2 { ldo2_reg: LDO2 {
regulator-name = "LDO2"; regulator-name = "LDO2";
regulator-min-microvolt = <900000>; regulator-min-microvolt = <800000>;
regulator-max-microvolt = <900000>; regulator-max-microvolt = <900000>;
regulator-boot-on; regulator-boot-on;
regulator-always-on; regulator-always-on;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment