Commit cfbde697 authored by Faidon Liambotis's avatar Faidon Liambotis Committed by David S. Miller

[PATCH] Kconfig: remove references of pcmcia-cs

pcmcia-cs/cardmgr is deprecated and mentioning it in the help text is
misleading.
Signed-off-by: default avatarFaidon Liambotis <paravoid@debian.org>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent e12dcb05
...@@ -63,11 +63,6 @@ config WAVELAN ...@@ -63,11 +63,6 @@ config WAVELAN
a Radio LAN (wireless Ethernet-like Local Area Network) using the a Radio LAN (wireless Ethernet-like Local Area Network) using the
radio frequencies 900 MHz and 2.4 GHz. radio frequencies 900 MHz and 2.4 GHz.
This driver support the ISA version of the WaveLAN card. A separate
driver for the PCMCIA (PC-card) hardware is available in David
Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
for location).
If you want to use an ISA WaveLAN card under Linux, say Y and read If you want to use an ISA WaveLAN card under Linux, say Y and read
the Ethernet-HOWTO, available from the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>. Some more specific <http://www.tldp.org/docs.html#howto>. Some more specific
...@@ -390,12 +385,7 @@ config PCMCIA_HERMES ...@@ -390,12 +385,7 @@ config PCMCIA_HERMES
such as the Linksys, D-Link and Farallon Skyline. It should also such as the Linksys, D-Link and Farallon Skyline. It should also
work on Symbol cards such as the 3Com AirConnect and Ericsson WLAN. work on Symbol cards such as the 3Com AirConnect and Ericsson WLAN.
To use your PC-cards, you will need supporting software from David You will very likely need the Wireless Tools in order to
Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
for location). You also want to check out the PCMCIA-HOWTO,
available from <http://www.tldp.org/docs.html#howto>.
You will also very likely also need the Wireless Tools in order to
configure your card and that /etc/pcmcia/wireless.opts works: configure your card and that /etc/pcmcia/wireless.opts works:
<http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>. <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
...@@ -467,11 +457,6 @@ config AIRO_CS ...@@ -467,11 +457,6 @@ config AIRO_CS
and Cisco proprietary API, so both the Linux Wireless Tools and the and Cisco proprietary API, so both the Linux Wireless Tools and the
Cisco Linux utilities can be used to configure the card. Cisco Linux utilities can be used to configure the card.
To use your PC-cards, you will need supporting software from David
Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
for location). You also want to check out the PCMCIA-HOWTO,
available from <http://www.tldp.org/docs.html#howto>.
config PCMCIA_WL3501 config PCMCIA_WL3501
tristate "Planet WL3501 PCMCIA cards" tristate "Planet WL3501 PCMCIA cards"
depends on EXPERIMENTAL && PCMCIA && WLAN_80211 depends on EXPERIMENTAL && PCMCIA && WLAN_80211
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment