ath9k: clarify what hw code is and remove ath9k.h from a few files

hw code will be shared between ath9k and ath9k_htc.
Just a few more files are left to clean up, mark them as well.
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/ath/ath9k/Makefile

-ath9k-y +=	hw.o \
-		eeprom.o \
+ATH9K_HW_FIX +=	eeprom.o \
+		mac.o \
+
+ATH9K_HW +=	hw.o \
 		eeprom_def.o \
 		eeprom_4k.o \
 		eeprom_9287.o \
-		mac.o \
 		calib.o \
 		ani.o \
 		phy.o \
+		btcoex.o
+
+ath9k-y +=	$(ATH9K_HW) \
+		$(ATH9K_HW_FIX) \
 		beacon.o \
 		main.o \
 		recv.o \
 		xmit.o \
 		virtual.o \
-		rc.o \
-		btcoex.o
+		rc.o
 
 ath9k-$(CONFIG_PCI) += pci.o
 ath9k-$(CONFIG_ATHEROS_AR71XX) += ahb.o

drivers/net/wireless/ath/ath9k/ani.c

@@ -14,7 +14,7 @@
  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
 
-#include "ath9k.h"
+#include "hw.h"
 
 static int ath9k_hw_get_ani_channel_idx(struct ath_hw *ah,
 					struct ath9k_channel *chan)

drivers/net/wireless/ath/ath9k/ath9k.h

@@ -499,7 +499,6 @@ struct ath_led {
  * Used when PCI device not fully initialized by bootrom/BIOS
 */
 #define DEFAULT_CACHELINE       32
-#define	ATH_DEFAULT_NOISE_FLOOR -95
 #define ATH_REGCLASSIDS_MAX     10
 #define ATH_CABQ_READY_TIME     80      /* % of beacon interval */
 #define ATH_MAX_SW_RETRIES      10

drivers/net/wireless/ath/ath9k/btcoex.c

@@ -14,7 +14,7 @@
  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
 
-#include "ath9k.h"
+#include "hw.h"
 
 enum ath_bt_mode {
 	ATH_BT_COEX_MODE_LEGACY,        /* legacy rx_clear mode */

drivers/net/wireless/ath/ath9k/calib.c

@@ -14,7 +14,6 @@
  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
 
-#include "ath9k.h"
 #include "hw.h"
 
 /* We can tune this as we go by monitoring really low values */

drivers/net/wireless/ath/ath9k/eeprom_4k.c

@@ -14,7 +14,6 @@
  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
 
-#include "ath9k.h"
 #include "hw.h"
 
 static int ath9k_hw_4k_get_eeprom_ver(struct ath_hw *ah)

drivers/net/wireless/ath/ath9k/eeprom_9287.c

@@ -14,7 +14,6 @@
  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
 
-#include "ath9k.h"
 #include "hw.h"
 
 static int ath9k_hw_AR9287_get_eeprom_ver(struct ath_hw *ah)

drivers/net/wireless/ath/ath9k/eeprom_def.c

@@ -14,7 +14,6 @@
  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
 
-#include "ath9k.h"
 #include "hw.h"
 
 static void ath9k_get_txgain_index(struct ath_hw *ah,

drivers/net/wireless/ath/ath9k/hw.c

@@ -18,7 +18,7 @@
 #include <asm/unaligned.h>
 
 #include "hw.h"
-#include "ath9k.h"
+#include "rc.h"
 #include "initvals.h"
 
 #define ATH9K_CLOCK_RATE_CCK		22

drivers/net/wireless/ath/ath9k/hw.h

@@ -53,6 +53,8 @@
 
 #define ATH_AMPDU_LIMIT_MAX        (64 * 1024 - 1)
 
+#define	ATH_DEFAULT_NOISE_FLOOR -95
+
 /* Register read/write primitives */
 #define REG_WRITE(_ah, _reg, _val) \
 	ath9k_hw_common(_ah)->ops->write((_ah), (_val), (_reg))

drivers/net/wireless/ath/ath9k/mac.c

@@ -15,7 +15,6 @@
  */
 
 #include "ath9k.h"
-#include "hw.h"
 
 static void ath9k_hw_set_txq_interrupts(struct ath_hw *ah,
 					struct ath9k_tx_queue_info *qi)

drivers/net/wireless/ath/ath9k/phy.c

@@ -14,7 +14,7 @@
  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
 
-#include "ath9k.h"
+#include "hw.h"
 
 void
 ath9k_hw_write_regs(struct ath_hw *ah, u32 modesIndex, u32 freqIndex,