Commit d0228aeb authored by Longfang Liu's avatar Longfang Liu Committed by Herbert Xu

crypto: hisilicon/sec2 - update SEC initialization and reset

Updates the initialization and reset of SEC driver's
register operation.
Signed-off-by: default avatarLongfang Liu <liulongfang@huawei.com>
Signed-off-by: default avatarHerbert Xu <herbert@gondor.apana.org.au>
parent 9597efc3
......@@ -44,6 +44,7 @@
#define QM_AXI_M_CFG 0x1000ac
#define AXI_M_CFG 0xffff
#define QM_AXI_M_CFG_ENABLE 0x1000b0
#define AM_CFG_SINGLE_PORT_MAX_TRANS 0x300014
#define AXI_M_CFG_ENABLE 0xffffffff
#define QM_PEH_AXUSER_CFG 0x1000cc
#define QM_PEH_AXUSER_CFG_ENABLE 0x1000d0
......
......@@ -22,11 +22,9 @@
#define SEC_PF_PCI_DEVICE_ID 0xa255
#define SEC_VF_PCI_DEVICE_ID 0xa256
#define SEC_XTS_MIV_ENABLE_REG 0x301384
#define SEC_XTS_MIV_ENABLE_MSK 0x7FFFFFFF
#define SEC_XTS_MIV_DISABLE_MSK 0xFFFFFFFF
#define SEC_BD_ERR_CHK_EN1 0xfffff7fd
#define SEC_BD_ERR_CHK_EN2 0xffffbfff
#define SEC_BD_ERR_CHK_EN0 0xEFFFFFFF
#define SEC_BD_ERR_CHK_EN1 0x7ffff7fd
#define SEC_BD_ERR_CHK_EN3 0xffffbfff
#define SEC_SQE_SIZE 128
#define SEC_SQ_SIZE (SEC_SQE_SIZE * QM_Q_DEPTH)
......@@ -47,17 +45,18 @@
#define SEC_ECC_ADDR(err) ((err) >> 0)
#define SEC_CORE_INT_DISABLE 0x0
#define SEC_CORE_INT_ENABLE 0x1ff
#define SEC_CORE_INT_CLEAR 0x1ff
#define SEC_SAA_ENABLE 0x17f
#define SEC_RAS_CE_REG 0x50
#define SEC_RAS_FE_REG 0x54
#define SEC_RAS_NFE_REG 0x58
#define SEC_RAS_CE_REG 0x301050
#define SEC_RAS_FE_REG 0x301054
#define SEC_RAS_NFE_REG 0x301058
#define SEC_RAS_CE_ENB_MSK 0x88
#define SEC_RAS_FE_ENB_MSK 0x0
#define SEC_RAS_NFE_ENB_MSK 0x177
#define SEC_RAS_DISABLE 0x0
#define SEC_MEM_START_INIT_REG 0x0100
#define SEC_MEM_INIT_DONE_REG 0x0104
#define SEC_QM_ABNORMAL_INT_MASK 0x100004
#define SEC_CONTROL_REG 0x0200
#define SEC_TRNG_EN_SHIFT 8
......@@ -68,8 +67,10 @@
#define SEC_INTERFACE_USER_CTRL0_REG 0x0220
#define SEC_INTERFACE_USER_CTRL1_REG 0x0224
#define SEC_SAA_EN_REG 0x0270
#define SEC_BD_ERR_CHK_EN_REG0 0x0380
#define SEC_BD_ERR_CHK_EN_REG1 0x0384
#define SEC_BD_ERR_CHK_EN_REG2 0x038c
#define SEC_BD_ERR_CHK_EN_REG3 0x038c
#define SEC_USER0_SMMU_NORMAL (BIT(23) | BIT(15))
#define SEC_USER1_SMMU_NORMAL (BIT(31) | BIT(23) | BIT(15) | BIT(7))
......@@ -77,8 +78,8 @@
#define SEC_DELAY_10_US 10
#define SEC_POLL_TIMEOUT_US 1000
#define SEC_VF_CNT_MASK 0xffffffc0
#define SEC_DBGFS_VAL_MAX_LEN 20
#define SEC_SINGLE_PORT_MAX_TRANS 0x2060
#define SEC_SQE_MASK_OFFSET 64
#define SEC_SQE_MASK_LEN 48
......@@ -297,25 +298,25 @@ static int sec_engine_init(struct hisi_qm *qm)
reg |= SEC_USER1_SMMU_NORMAL;
writel_relaxed(reg, SEC_ADDR(qm, SEC_INTERFACE_USER_CTRL1_REG));
writel(SEC_SINGLE_PORT_MAX_TRANS,
qm->io_base + AM_CFG_SINGLE_PORT_MAX_TRANS);
writel(SEC_SAA_ENABLE, SEC_ADDR(qm, SEC_SAA_EN_REG));
/* Enable sm4 extra mode, as ctr/ecb */
writel_relaxed(SEC_BD_ERR_CHK_EN0,
SEC_ADDR(qm, SEC_BD_ERR_CHK_EN_REG0));
/* Enable sm4 xts mode multiple iv */
writel_relaxed(SEC_BD_ERR_CHK_EN1,
SEC_ADDR(qm, SEC_BD_ERR_CHK_EN_REG1));
writel_relaxed(SEC_BD_ERR_CHK_EN2,
SEC_ADDR(qm, SEC_BD_ERR_CHK_EN_REG2));
/* enable clock gate control */
reg = readl_relaxed(SEC_ADDR(qm, SEC_CONTROL_REG));
reg |= SEC_CLK_GATE_ENABLE;
writel_relaxed(reg, SEC_ADDR(qm, SEC_CONTROL_REG));
writel_relaxed(SEC_BD_ERR_CHK_EN3,
SEC_ADDR(qm, SEC_BD_ERR_CHK_EN_REG3));
/* config endian */
reg = readl_relaxed(SEC_ADDR(qm, SEC_CONTROL_REG));
reg |= sec_get_endian(qm);
writel_relaxed(reg, SEC_ADDR(qm, SEC_CONTROL_REG));
/* Enable sm4 xts mode multiple iv */
writel_relaxed(SEC_XTS_MIV_ENABLE_MSK,
qm->io_base + SEC_XTS_MIV_ENABLE_REG);
return 0;
}
......@@ -374,10 +375,10 @@ static void sec_hw_error_enable(struct hisi_qm *qm)
return;
}
val = readl(qm->io_base + SEC_CONTROL_REG);
val = readl(SEC_ADDR(qm, SEC_CONTROL_REG));
/* clear SEC hw error source if having */
writel(SEC_CORE_INT_DISABLE, qm->io_base + SEC_CORE_INT_SOURCE);
writel(SEC_CORE_INT_CLEAR, qm->io_base + SEC_CORE_INT_SOURCE);
/* enable SEC hw error interrupts */
writel(SEC_CORE_INT_ENABLE, qm->io_base + SEC_CORE_INT_MASK);
......@@ -390,14 +391,14 @@ static void sec_hw_error_enable(struct hisi_qm *qm)
/* enable SEC block master OOO when m-bit error occur */
val = val | SEC_AXI_SHUTDOWN_ENABLE;
writel(val, qm->io_base + SEC_CONTROL_REG);
writel(val, SEC_ADDR(qm, SEC_CONTROL_REG));
}
static void sec_hw_error_disable(struct hisi_qm *qm)
{
u32 val;
val = readl(qm->io_base + SEC_CONTROL_REG);
val = readl(SEC_ADDR(qm, SEC_CONTROL_REG));
/* disable RAS int */
writel(SEC_RAS_DISABLE, qm->io_base + SEC_RAS_CE_REG);
......@@ -410,7 +411,7 @@ static void sec_hw_error_disable(struct hisi_qm *qm)
/* disable SEC block master OOO when m-bit error occur */
val = val & SEC_AXI_SHUTDOWN_DISABLE;
writel(val, qm->io_base + SEC_CONTROL_REG);
writel(val, SEC_ADDR(qm, SEC_CONTROL_REG));
}
static u32 sec_current_qm_read(struct sec_debug_file *file)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment