Commit d0749adb authored by Laurent Pinchart's avatar Laurent Pinchart Committed by Mauro Carvalho Chehab

media: v4l2-subdev: Add subdev .(enable|disable)_streams() operations

Add two new subdev pad operations, .enable_streams() and
.disable_streams(), to allow control of individual streams per pad. This
is a superset of what the video .s_stream() operation implements.

To help with handling of backward compatibility, add two wrapper
functions around those operations, and require their usage in drivers.
Signed-off-by: default avatarTomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: default avatarLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: default avatarJacopo Mondi <jacopo@jmondi.org>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@kernel.org>
parent c4a73f31
......@@ -1743,6 +1743,230 @@ int v4l2_subdev_routing_validate(struct v4l2_subdev *sd,
}
EXPORT_SYMBOL_GPL(v4l2_subdev_routing_validate);
static int v4l2_subdev_enable_streams_fallback(struct v4l2_subdev *sd, u32 pad,
u64 streams_mask)
{
struct device *dev = sd->entity.graph_obj.mdev->dev;
unsigned int i;
int ret;
/*
* The subdev doesn't implement pad-based stream enable, fall back
* on the .s_stream() operation. This can only be done for subdevs that
* have a single source pad, as sd->enabled_streams is global to the
* subdev.
*/
if (!(sd->entity.pads[pad].flags & MEDIA_PAD_FL_SOURCE))
return -EOPNOTSUPP;
for (i = 0; i < sd->entity.num_pads; ++i) {
if (i != pad && sd->entity.pads[i].flags & MEDIA_PAD_FL_SOURCE)
return -EOPNOTSUPP;
}
if (sd->enabled_streams & streams_mask) {
dev_dbg(dev, "set of streams %#llx already enabled on %s:%u\n",
streams_mask, sd->entity.name, pad);
return -EALREADY;
}
/* Start streaming when the first streams are enabled. */
if (!sd->enabled_streams) {
ret = v4l2_subdev_call(sd, video, s_stream, 1);
if (ret)
return ret;
}
sd->enabled_streams |= streams_mask;
return 0;
}
int v4l2_subdev_enable_streams(struct v4l2_subdev *sd, u32 pad,
u64 streams_mask)
{
struct device *dev = sd->entity.graph_obj.mdev->dev;
struct v4l2_subdev_state *state;
u64 found_streams = 0;
unsigned int i;
int ret;
/* A few basic sanity checks first. */
if (pad >= sd->entity.num_pads)
return -EINVAL;
if (!streams_mask)
return 0;
/* Fallback on .s_stream() if .enable_streams() isn't available. */
if (!sd->ops->pad || !sd->ops->pad->enable_streams)
return v4l2_subdev_enable_streams_fallback(sd, pad,
streams_mask);
state = v4l2_subdev_lock_and_get_active_state(sd);
/*
* Verify that the requested streams exist and that they are not
* already enabled.
*/
for (i = 0; i < state->stream_configs.num_configs; ++i) {
struct v4l2_subdev_stream_config *cfg =
&state->stream_configs.configs[i];
if (cfg->pad != pad || !(streams_mask & BIT_ULL(cfg->stream)))
continue;
found_streams |= BIT_ULL(cfg->stream);
if (cfg->enabled) {
dev_dbg(dev, "stream %u already enabled on %s:%u\n",
cfg->stream, sd->entity.name, pad);
ret = -EALREADY;
goto done;
}
}
if (found_streams != streams_mask) {
dev_dbg(dev, "streams 0x%llx not found on %s:%u\n",
streams_mask & ~found_streams, sd->entity.name, pad);
ret = -EINVAL;
goto done;
}
/* Call the .enable_streams() operation. */
ret = v4l2_subdev_call(sd, pad, enable_streams, state, pad,
streams_mask);
if (ret)
goto done;
/* Mark the streams as enabled. */
for (i = 0; i < state->stream_configs.num_configs; ++i) {
struct v4l2_subdev_stream_config *cfg =
&state->stream_configs.configs[i];
if (cfg->pad == pad && (streams_mask & BIT_ULL(cfg->stream)))
cfg->enabled = true;
}
done:
v4l2_subdev_unlock_state(state);
return ret;
}
EXPORT_SYMBOL_GPL(v4l2_subdev_enable_streams);
static int v4l2_subdev_disable_streams_fallback(struct v4l2_subdev *sd, u32 pad,
u64 streams_mask)
{
struct device *dev = sd->entity.graph_obj.mdev->dev;
unsigned int i;
int ret;
/*
* If the subdev doesn't implement pad-based stream enable, fall back
* on the .s_stream() operation. This can only be done for subdevs that
* have a single source pad, as sd->enabled_streams is global to the
* subdev.
*/
if (!(sd->entity.pads[pad].flags & MEDIA_PAD_FL_SOURCE))
return -EOPNOTSUPP;
for (i = 0; i < sd->entity.num_pads; ++i) {
if (i != pad && sd->entity.pads[i].flags & MEDIA_PAD_FL_SOURCE)
return -EOPNOTSUPP;
}
if ((sd->enabled_streams & streams_mask) != streams_mask) {
dev_dbg(dev, "set of streams %#llx already disabled on %s:%u\n",
streams_mask, sd->entity.name, pad);
return -EALREADY;
}
/* Stop streaming when the last streams are disabled. */
if (!(sd->enabled_streams & ~streams_mask)) {
ret = v4l2_subdev_call(sd, video, s_stream, 0);
if (ret)
return ret;
}
sd->enabled_streams &= ~streams_mask;
return 0;
}
int v4l2_subdev_disable_streams(struct v4l2_subdev *sd, u32 pad,
u64 streams_mask)
{
struct device *dev = sd->entity.graph_obj.mdev->dev;
struct v4l2_subdev_state *state;
u64 found_streams = 0;
unsigned int i;
int ret;
/* A few basic sanity checks first. */
if (pad >= sd->entity.num_pads)
return -EINVAL;
if (!streams_mask)
return 0;
/* Fallback on .s_stream() if .disable_streams() isn't available. */
if (!sd->ops->pad || !sd->ops->pad->disable_streams)
return v4l2_subdev_disable_streams_fallback(sd, pad,
streams_mask);
state = v4l2_subdev_lock_and_get_active_state(sd);
/*
* Verify that the requested streams exist and that they are not
* already disabled.
*/
for (i = 0; i < state->stream_configs.num_configs; ++i) {
struct v4l2_subdev_stream_config *cfg =
&state->stream_configs.configs[i];
if (cfg->pad != pad || !(streams_mask & BIT_ULL(cfg->stream)))
continue;
found_streams |= BIT_ULL(cfg->stream);
if (!cfg->enabled) {
dev_dbg(dev, "stream %u already disabled on %s:%u\n",
cfg->stream, sd->entity.name, pad);
ret = -EALREADY;
goto done;
}
}
if (found_streams != streams_mask) {
dev_dbg(dev, "streams 0x%llx not found on %s:%u\n",
streams_mask & ~found_streams, sd->entity.name, pad);
ret = -EINVAL;
goto done;
}
/* Call the .disable_streams() operation. */
ret = v4l2_subdev_call(sd, pad, disable_streams, state, pad,
streams_mask);
if (ret)
goto done;
/* Mark the streams as disabled. */
for (i = 0; i < state->stream_configs.num_configs; ++i) {
struct v4l2_subdev_stream_config *cfg =
&state->stream_configs.configs[i];
if (cfg->pad == pad && (streams_mask & BIT_ULL(cfg->stream)))
cfg->enabled = false;
}
done:
v4l2_subdev_unlock_state(state);
return ret;
}
EXPORT_SYMBOL_GPL(v4l2_subdev_disable_streams);
#endif /* CONFIG_VIDEO_V4L2_SUBDEV_API */
#endif /* CONFIG_MEDIA_CONTROLLER */
......
......@@ -705,6 +705,7 @@ struct v4l2_subdev_pad_config {
*
* @pad: pad number
* @stream: stream number
* @enabled: has the stream been enabled with v4l2_subdev_enable_stream()
* @fmt: &struct v4l2_mbus_framefmt
* @crop: &struct v4l2_rect to be used for crop
* @compose: &struct v4l2_rect to be used for compose
......@@ -714,6 +715,7 @@ struct v4l2_subdev_pad_config {
struct v4l2_subdev_stream_config {
u32 pad;
u32 stream;
bool enabled;
struct v4l2_mbus_framefmt fmt;
struct v4l2_rect crop;
......@@ -819,6 +821,18 @@ struct v4l2_subdev_state {
*
* @set_routing: enable or disable data connection routes described in the
* subdevice routing table.
*
* @enable_streams: Enable the streams defined in streams_mask on the given
* source pad. Subdevs that implement this operation must use the active
* state management provided by the subdev core (enabled through a call to
* v4l2_subdev_init_finalize() at initialization time). Do not call
* directly, use v4l2_subdev_enable_streams() instead.
*
* @disable_streams: Disable the streams defined in streams_mask on the given
* source pad. Subdevs that implement this operation must use the active
* state management provided by the subdev core (enabled through a call to
* v4l2_subdev_init_finalize() at initialization time). Do not call
* directly, use v4l2_subdev_disable_streams() instead.
*/
struct v4l2_subdev_pad_ops {
int (*init_cfg)(struct v4l2_subdev *sd,
......@@ -865,6 +879,12 @@ struct v4l2_subdev_pad_ops {
struct v4l2_subdev_state *state,
enum v4l2_subdev_format_whence which,
struct v4l2_subdev_krouting *route);
int (*enable_streams)(struct v4l2_subdev *sd,
struct v4l2_subdev_state *state, u32 pad,
u64 streams_mask);
int (*disable_streams)(struct v4l2_subdev *sd,
struct v4l2_subdev_state *state, u32 pad,
u64 streams_mask);
};
/**
......@@ -1010,6 +1030,10 @@ struct v4l2_subdev_platform_data {
* @active_state: Active state for the subdev (NULL for subdevs tracking the
* state internally). Initialized by calling
* v4l2_subdev_init_finalize().
* @enabled_streams: Bitmask of enabled streams used by
* v4l2_subdev_enable_streams() and
* v4l2_subdev_disable_streams() helper functions for fallback
* cases.
*
* Each instance of a subdev driver should create this struct, either
* stand-alone or embedded in a larger struct.
......@@ -1055,6 +1079,7 @@ struct v4l2_subdev {
* doesn't support it.
*/
struct v4l2_subdev_state *active_state;
u64 enabled_streams;
};
......@@ -1646,6 +1671,66 @@ int v4l2_subdev_routing_validate(struct v4l2_subdev *sd,
const struct v4l2_subdev_krouting *routing,
enum v4l2_subdev_routing_restriction disallow);
/**
* v4l2_subdev_enable_streams() - Enable streams on a pad
* @sd: The subdevice
* @pad: The pad
* @streams_mask: Bitmask of streams to enable
*
* This function enables streams on a source @pad of a subdevice. The pad is
* identified by its index, while the streams are identified by the
* @streams_mask bitmask. This allows enabling multiple streams on a pad at
* once.
*
* Enabling a stream that is already enabled isn't allowed. If @streams_mask
* contains an already enabled stream, this function returns -EALREADY without
* performing any operation.
*
* Per-stream enable is only available for subdevs that implement the
* .enable_streams() and .disable_streams() operations. For other subdevs, this
* function implements a best-effort compatibility by calling the .s_stream()
* operation, limited to subdevs that have a single source pad.
*
* Return:
* * 0: Success
* * -EALREADY: One of the streams in streams_mask is already enabled
* * -EINVAL: The pad index is invalid, or doesn't correspond to a source pad
* * -EOPNOTSUPP: Falling back to the legacy .s_stream() operation is
* impossible because the subdev has multiple source pads
*/
int v4l2_subdev_enable_streams(struct v4l2_subdev *sd, u32 pad,
u64 streams_mask);
/**
* v4l2_subdev_disable_streams() - Disable streams on a pad
* @sd: The subdevice
* @pad: The pad
* @streams_mask: Bitmask of streams to disable
*
* This function disables streams on a source @pad of a subdevice. The pad is
* identified by its index, while the streams are identified by the
* @streams_mask bitmask. This allows disabling multiple streams on a pad at
* once.
*
* Disabling a streams that is not enabled isn't allowed. If @streams_mask
* contains a disabled stream, this function returns -EALREADY without
* performing any operation.
*
* Per-stream disable is only available for subdevs that implement the
* .enable_streams() and .disable_streams() operations. For other subdevs, this
* function implements a best-effort compatibility by calling the .s_stream()
* operation, limited to subdevs that have a single source pad.
*
* Return:
* * 0: Success
* * -EALREADY: One of the streams in streams_mask is not enabled
* * -EINVAL: The pad index is invalid, or doesn't correspond to a source pad
* * -EOPNOTSUPP: Falling back to the legacy .s_stream() operation is
* impossible because the subdev has multiple source pads
*/
int v4l2_subdev_disable_streams(struct v4l2_subdev *sd, u32 pad,
u64 streams_mask);
#endif /* CONFIG_VIDEO_V4L2_SUBDEV_API */
#endif /* CONFIG_MEDIA_CONTROLLER */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment