[ARM] Split ARM MM initialisation for !mmu

Move the MMU specific code from init.c into mmu.c, and add nommu
fixups to nommu.c
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

arch/arm/mm/Makefile

@@ -6,7 +6,7 @@ obj-y				:= consistent.o extable.o fault.o init.o \
 				   iomap.o
 
 obj-$(CONFIG_MMU)		+= fault-armv.o flush.o ioremap.o mmap.o \
-				   mm-armv.o
+				   mm-armv.o mmu.o
 
 ifneq ($(CONFIG_MMU),y)
 obj-y				+= nommu.o

arch/arm/mm/init.c

@@ -27,10 +27,7 @@
 
 #include "mm.h"
 
-DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
-
-extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
-extern void _stext, _text, _etext, __data_start, _end, __init_begin, __init_end;
+extern void _text, _etext, __data_start, _end, __init_begin, __init_end;
 extern unsigned long phys_initrd_start;
 extern unsigned long phys_initrd_size;
 
@@ -40,17 +37,6 @@ extern unsigned long phys_initrd_size;
  */
 static struct meminfo meminfo __initdata = { 0, };
 
-/*
- * empty_zero_page is a special page that is used for
- * zero-initialized data and COW.
- */
-struct page *empty_zero_page;
-
-/*
- * The pmd table for the upper-most set of pages.
- */
-pmd_t *top_pmd;
-
 void show_mem(void)
 {
 	int free = 0, total = 0, reserved = 0;
@@ -173,87 +159,9 @@ static int __init check_initrd(struct meminfo *mi)
 	return initrd_node;
 }
 
-/*
- * Reserve the various regions of node 0
- */
-static __init void reserve_node_zero(pg_data_t *pgdat)
-{
-	unsigned long res_size = 0;
-
-	/*
-	 * Register the kernel text and data with bootmem.
-	 * Note that this can only be in node 0.
-	 */
-#ifdef CONFIG_XIP_KERNEL
-	reserve_bootmem_node(pgdat, __pa(&__data_start), &_end - &__data_start);
-#else
-	reserve_bootmem_node(pgdat, __pa(&_stext), &_end - &_stext);
-#endif
-
-	/*
-	 * Reserve the page tables.  These are already in use,
-	 * and can only be in node 0.
-	 */
-	reserve_bootmem_node(pgdat, __pa(swapper_pg_dir),
-			     PTRS_PER_PGD * sizeof(pgd_t));
-
-	/*
-	 * Hmm... This should go elsewhere, but we really really need to
-	 * stop things allocating the low memory; ideally we need a better
-	 * implementation of GFP_DMA which does not assume that DMA-able
-	 * memory starts at zero.
-	 */
-	if (machine_is_integrator() || machine_is_cintegrator())
-		res_size = __pa(swapper_pg_dir) - PHYS_OFFSET;
-
-	/*
-	 * These should likewise go elsewhere.  They pre-reserve the
-	 * screen memory region at the start of main system memory.
-	 */
-	if (machine_is_edb7211())
-		res_size = 0x00020000;
-	if (machine_is_p720t())
-		res_size = 0x00014000;
-
-#ifdef CONFIG_SA1111
-	/*
-	 * Because of the SA1111 DMA bug, we want to preserve our
-	 * precious DMA-able memory...
-	 */
-	res_size = __pa(swapper_pg_dir) - PHYS_OFFSET;
-#endif
-	if (res_size)
-		reserve_bootmem_node(pgdat, PHYS_OFFSET, res_size);
-}
-
-static inline void prepare_page_table(struct meminfo *mi)
-{
-	unsigned long addr;
-
-	/*
-	 * Clear out all the mappings below the kernel image.
-	 */
-	for (addr = 0; addr < MODULE_START; addr += PGDIR_SIZE)
-		pmd_clear(pmd_off_k(addr));
-
-#ifdef CONFIG_XIP_KERNEL
-	/* The XIP kernel is mapped in the module area -- skip over it */
-	addr = ((unsigned long)&_etext + PGDIR_SIZE - 1) & PGDIR_MASK;
-#endif
-	for ( ; addr < PAGE_OFFSET; addr += PGDIR_SIZE)
-		pmd_clear(pmd_off_k(addr));
-
-	/*
-	 * Clear out all the kernel space mappings, except for the first
-	 * memory bank, up to the end of the vmalloc region.
-	 */
-	for (addr = __phys_to_virt(mi->bank[0].start + mi->bank[0].size);
-	     addr < VMALLOC_END; addr += PGDIR_SIZE)
-		pmd_clear(pmd_off_k(addr));
-}
-
 static inline void map_memory_bank(struct membank *bank)
 {
+#ifdef CONFIG_MMU
 	struct map_desc map;
 
 	map.pfn = __phys_to_pfn(bank->start);
@@ -262,6 +170,7 @@ static inline void map_memory_bank(struct membank *bank)
 	map.type = MT_MEMORY;
 
 	create_mapping(&map);
+#endif
 }
 
 static unsigned long __init
@@ -373,7 +282,7 @@ bootmem_init_node(int node, int initrd_node, struct meminfo *mi)
 	return end_pfn;
 }
 
-static void __init bootmem_init(struct meminfo *mi)
+void __init bootmem_init(struct meminfo *mi)
 {
 	unsigned long memend_pfn = 0;
 	int node, initrd_node, i;
@@ -387,8 +296,6 @@ static void __init bootmem_init(struct meminfo *mi)
 
 	memcpy(&meminfo, mi, sizeof(meminfo));
 
-	prepare_page_table(mi);
-
 	/*
 	 * Locate which node contains the ramdisk image, if any.
 	 */
@@ -422,114 +329,6 @@ static void __init bootmem_init(struct meminfo *mi)
 	max_pfn = max_low_pfn = memend_pfn - PHYS_PFN_OFFSET;
 }
 
-/*
- * Set up device the mappings.  Since we clear out the page tables for all
- * mappings above VMALLOC_END, we will remove any debug device mappings.
- * This means you have to be careful how you debug this function, or any
- * called function.  This means you can't use any function or debugging
- * method which may touch any device, otherwise the kernel _will_ crash.
- */
-static void __init devicemaps_init(struct machine_desc *mdesc)
-{
-	struct map_desc map;
-	unsigned long addr;
-	void *vectors;
-
-	/*
-	 * Allocate the vector page early.
-	 */
-	vectors = alloc_bootmem_low_pages(PAGE_SIZE);
-	BUG_ON(!vectors);
-
-	for (addr = VMALLOC_END; addr; addr += PGDIR_SIZE)
-		pmd_clear(pmd_off_k(addr));
-
-	/*
-	 * Map the kernel if it is XIP.
-	 * It is always first in the modulearea.
-	 */
-#ifdef CONFIG_XIP_KERNEL
-	map.pfn = __phys_to_pfn(CONFIG_XIP_PHYS_ADDR & SECTION_MASK);
-	map.virtual = MODULE_START;
-	map.length = ((unsigned long)&_etext - map.virtual + ~SECTION_MASK) & SECTION_MASK;
-	map.type = MT_ROM;
-	create_mapping(&map);
-#endif
-
-	/*
-	 * Map the cache flushing regions.
-	 */
-#ifdef FLUSH_BASE
-	map.pfn = __phys_to_pfn(FLUSH_BASE_PHYS);
-	map.virtual = FLUSH_BASE;
-	map.length = SZ_1M;
-	map.type = MT_CACHECLEAN;
-	create_mapping(&map);
-#endif
-#ifdef FLUSH_BASE_MINICACHE
-	map.pfn = __phys_to_pfn(FLUSH_BASE_PHYS + SZ_1M);
-	map.virtual = FLUSH_BASE_MINICACHE;
-	map.length = SZ_1M;
-	map.type = MT_MINICLEAN;
-	create_mapping(&map);
-#endif
-
-	/*
-	 * Create a mapping for the machine vectors at the high-vectors
-	 * location (0xffff0000).  If we aren't using high-vectors, also
-	 * create a mapping at the low-vectors virtual address.
-	 */
-	map.pfn = __phys_to_pfn(virt_to_phys(vectors));
-	map.virtual = 0xffff0000;
-	map.length = PAGE_SIZE;
-	map.type = MT_HIGH_VECTORS;
-	create_mapping(&map);
-
-	if (!vectors_high()) {
-		map.virtual = 0;
-		map.type = MT_LOW_VECTORS;
-		create_mapping(&map);
-	}
-
-	/*
-	 * Ask the machine support to map in the statically mapped devices.
-	 */
-	if (mdesc->map_io)
-		mdesc->map_io();
-
-	/*
-	 * Finally flush the caches and tlb to ensure that we're in a
-	 * consistent state wrt the writebuffer.  This also ensures that
-	 * any write-allocated cache lines in the vector page are written
-	 * back.  After this point, we can start to touch devices again.
-	 */
-	local_flush_tlb_all();
-	flush_cache_all();
-}
-
-/*
- * paging_init() sets up the page tables, initialises the zone memory
- * maps, and sets up the zero page, bad page and bad page tables.
- */
-void __init paging_init(struct meminfo *mi, struct machine_desc *mdesc)
-{
-	void *zero_page;
-
-	build_mem_type_table();
-	bootmem_init(mi);
-	devicemaps_init(mdesc);
-
-	top_pmd = pmd_off_k(0xffff0000);
-
-	/*
-	 * allocate the zero page.  Note that we count on this going ok.
-	 */
-	zero_page = alloc_bootmem_low_pages(PAGE_SIZE);
-	memzero(zero_page, PAGE_SIZE);
-	empty_zero_page = virt_to_page(zero_page);
-	flush_dcache_page(empty_zero_page);
-}
-
 static inline void free_area(unsigned long addr, unsigned long end, char *s)
 {
 	unsigned int size = (end - addr) >> 10;

arch/arm/mm/mm.h

@@ -14,6 +14,10 @@ static inline pmd_t *pmd_off_k(unsigned long virt)
 }
 
 struct map_desc;
+struct meminfo;
+struct pglist_data;
 
 void __init build_mem_type_table(void);
 void __init create_mapping(struct map_desc *md);
+void __init bootmem_init(struct meminfo *mi);
+void reserve_node_zero(struct pglist_data *pgdat);

arch/arm/mm/mmu.c

+/*
+ *  linux/arch/arm/mm/mmu.c
+ *
+ *  Copyright (C) 1995-2005 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/bootmem.h>
+#include <linux/mman.h>
+#include <linux/nodemask.h>
+
+#include <asm/mach-types.h>
+#include <asm/setup.h>
+#include <asm/sizes.h>
+#include <asm/tlb.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include "mm.h"
+
+DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
+
+extern void _stext, __data_start, _end;
+extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
+
+/*
+ * empty_zero_page is a special page that is used for
+ * zero-initialized data and COW.
+ */
+struct page *empty_zero_page;
+
+/*
+ * The pmd table for the upper-most set of pages.
+ */
+pmd_t *top_pmd;
+
+static inline void prepare_page_table(struct meminfo *mi)
+{
+	unsigned long addr;
+
+	/*
+	 * Clear out all the mappings below the kernel image.
+	 */
+	for (addr = 0; addr < MODULE_START; addr += PGDIR_SIZE)
+		pmd_clear(pmd_off_k(addr));
+
+#ifdef CONFIG_XIP_KERNEL
+	/* The XIP kernel is mapped in the module area -- skip over it */
+	addr = ((unsigned long)&_etext + PGDIR_SIZE - 1) & PGDIR_MASK;
+#endif
+	for ( ; addr < PAGE_OFFSET; addr += PGDIR_SIZE)
+		pmd_clear(pmd_off_k(addr));
+
+	/*
+	 * Clear out all the kernel space mappings, except for the first
+	 * memory bank, up to the end of the vmalloc region.
+	 */
+	for (addr = __phys_to_virt(mi->bank[0].start + mi->bank[0].size);
+	     addr < VMALLOC_END; addr += PGDIR_SIZE)
+		pmd_clear(pmd_off_k(addr));
+}
+
+/*
+ * Reserve the various regions of node 0
+ */
+void __init reserve_node_zero(pg_data_t *pgdat)
+{
+	unsigned long res_size = 0;
+
+	/*
+	 * Register the kernel text and data with bootmem.
+	 * Note that this can only be in node 0.
+	 */
+#ifdef CONFIG_XIP_KERNEL
+	reserve_bootmem_node(pgdat, __pa(&__data_start), &_end - &__data_start);
+#else
+	reserve_bootmem_node(pgdat, __pa(&_stext), &_end - &_stext);
+#endif
+
+	/*
+	 * Reserve the page tables.  These are already in use,
+	 * and can only be in node 0.
+	 */
+	reserve_bootmem_node(pgdat, __pa(swapper_pg_dir),
+			     PTRS_PER_PGD * sizeof(pgd_t));
+
+	/*
+	 * Hmm... This should go elsewhere, but we really really need to
+	 * stop things allocating the low memory; ideally we need a better
+	 * implementation of GFP_DMA which does not assume that DMA-able
+	 * memory starts at zero.
+	 */
+	if (machine_is_integrator() || machine_is_cintegrator())
+		res_size = __pa(swapper_pg_dir) - PHYS_OFFSET;
+
+	/*
+	 * These should likewise go elsewhere.  They pre-reserve the
+	 * screen memory region at the start of main system memory.
+	 */
+	if (machine_is_edb7211())
+		res_size = 0x00020000;
+	if (machine_is_p720t())
+		res_size = 0x00014000;
+
+#ifdef CONFIG_SA1111
+	/*
+	 * Because of the SA1111 DMA bug, we want to preserve our
+	 * precious DMA-able memory...
+	 */
+	res_size = __pa(swapper_pg_dir) - PHYS_OFFSET;
+#endif
+	if (res_size)
+		reserve_bootmem_node(pgdat, PHYS_OFFSET, res_size);
+}
+
+/*
+ * Set up device the mappings.  Since we clear out the page tables for all
+ * mappings above VMALLOC_END, we will remove any debug device mappings.
+ * This means you have to be careful how you debug this function, or any
+ * called function.  This means you can't use any function or debugging
+ * method which may touch any device, otherwise the kernel _will_ crash.
+ */
+static void __init devicemaps_init(struct machine_desc *mdesc)
+{
+	struct map_desc map;
+	unsigned long addr;
+	void *vectors;
+
+	/*
+	 * Allocate the vector page early.
+	 */
+	vectors = alloc_bootmem_low_pages(PAGE_SIZE);
+	BUG_ON(!vectors);
+
+	for (addr = VMALLOC_END; addr; addr += PGDIR_SIZE)
+		pmd_clear(pmd_off_k(addr));
+
+	/*
+	 * Map the kernel if it is XIP.
+	 * It is always first in the modulearea.
+	 */
+#ifdef CONFIG_XIP_KERNEL
+	map.pfn = __phys_to_pfn(CONFIG_XIP_PHYS_ADDR & SECTION_MASK);
+	map.virtual = MODULE_START;
+	map.length = ((unsigned long)&_etext - map.virtual + ~SECTION_MASK) & SECTION_MASK;
+	map.type = MT_ROM;
+	create_mapping(&map);
+#endif
+
+	/*
+	 * Map the cache flushing regions.
+	 */
+#ifdef FLUSH_BASE
+	map.pfn = __phys_to_pfn(FLUSH_BASE_PHYS);
+	map.virtual = FLUSH_BASE;
+	map.length = SZ_1M;
+	map.type = MT_CACHECLEAN;
+	create_mapping(&map);
+#endif
+#ifdef FLUSH_BASE_MINICACHE
+	map.pfn = __phys_to_pfn(FLUSH_BASE_PHYS + SZ_1M);
+	map.virtual = FLUSH_BASE_MINICACHE;
+	map.length = SZ_1M;
+	map.type = MT_MINICLEAN;
+	create_mapping(&map);
+#endif
+
+	/*
+	 * Create a mapping for the machine vectors at the high-vectors
+	 * location (0xffff0000).  If we aren't using high-vectors, also
+	 * create a mapping at the low-vectors virtual address.
+	 */
+	map.pfn = __phys_to_pfn(virt_to_phys(vectors));
+	map.virtual = 0xffff0000;
+	map.length = PAGE_SIZE;
+	map.type = MT_HIGH_VECTORS;
+	create_mapping(&map);
+
+	if (!vectors_high()) {
+		map.virtual = 0;
+		map.type = MT_LOW_VECTORS;
+		create_mapping(&map);
+	}
+
+	/*
+	 * Ask the machine support to map in the statically mapped devices.
+	 */
+	if (mdesc->map_io)
+		mdesc->map_io();
+
+	/*
+	 * Finally flush the caches and tlb to ensure that we're in a
+	 * consistent state wrt the writebuffer.  This also ensures that
+	 * any write-allocated cache lines in the vector page are written
+	 * back.  After this point, we can start to touch devices again.
+	 */
+	local_flush_tlb_all();
+	flush_cache_all();
+}
+
+/*
+ * paging_init() sets up the page tables, initialises the zone memory
+ * maps, and sets up the zero page, bad page and bad page tables.
+ */
+void __init paging_init(struct meminfo *mi, struct machine_desc *mdesc)
+{
+	void *zero_page;
+
+	build_mem_type_table();
+	prepare_page_table(mi);
+	bootmem_init(mi);
+	devicemaps_init(mdesc);
+
+	top_pmd = pmd_off_k(0xffff0000);
+
+	/*
+	 * allocate the zero page.  Note that we count on this going ok.
+	 */
+	zero_page = alloc_bootmem_low_pages(PAGE_SIZE);
+	memzero(zero_page, PAGE_SIZE);
+	empty_zero_page = virt_to_page(zero_page);
+	flush_dcache_page(empty_zero_page);
+}

arch/arm/mm/nommu.c

@@ -11,6 +11,42 @@
 #include <asm/io.h>
 #include <asm/page.h>
 
+#include "mm.h"
+
+extern void _stext, __data_start, _end;
+
+/*
+ * Reserve the various regions of node 0
+ */
+void __init reserve_node_zero(pg_data_t *pgdat)
+{
+	/*
+	 * Register the kernel text and data with bootmem.
+	 * Note that this can only be in node 0.
+	 */
+#ifdef CONFIG_XIP_KERNEL
+	reserve_bootmem_node(pgdat, __pa(&__data_start), &_end - &__data_start);
+#else
+	reserve_bootmem_node(pgdat, __pa(&_stext), &_end - &_stext);
+#endif
+
+	/*
+	 * Register the exception vector page.
+	 * some architectures which the DRAM is the exception vector to trap,
+	 * alloc_page breaks with error, although it is not NULL, but "0."
+	 */
+	reserve_bootmem_node(pgdat, CONFIG_VECTORS_BASE, PAGE_SIZE);
+}
+
+/*
+ * paging_init() sets up the page tables, initialises the zone memory
+ * maps, and sets up the zero page, bad page and bad page tables.
+ */
+void __init paging_init(struct meminfo *mi, struct machine_desc *mdesc)
+{
+	bootmem_init(mi);
+}
+
 void flush_dcache_page(struct page *page)
 {
 	__cpuc_flush_dcache_page(page_address(page));