Commit d1419d50 authored by Roger Tseng's avatar Roger Tseng Committed by Ulf Hansson

mmc: rtsx_pci_sdmmc: fix incorrect last byte in R2 response

Current code erroneously fill the last byte of R2 response with an undefined
value. In addition, the controller actually 'offloads' the last byte
(CRC7, end bit) while receiving R2 response and thus it's impossible to get the
actual value. This could cause mmc stack to obtain inconsistent CID from the
same card after resume and misidentify it as a different card.

Fix by assigning dummy CRC and end bit: {7'b0, 1} = 0x1 to the last byte of R2.

Cc: <stable@vger.kernel.org> # v3.8+
Fixes: ff984e57 ("mmc: Add realtek pcie sdmmc host driver")
Signed-off-by: default avatarRoger Tseng <rogerable@realtek.com>
Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
parent ee9d19d4
......@@ -412,6 +412,13 @@ static void sd_send_cmd_get_rsp(struct realtek_pci_sdmmc *host,
}
if (rsp_type == SD_RSP_TYPE_R2) {
/*
* The controller offloads the last byte {CRC-7, end bit 1'b1}
* of response type R2. Assign dummy CRC, 0, and end bit to the
* byte(ptr[16], goes into the LSB of resp[3] later).
*/
ptr[16] = 1;
for (i = 0; i < 4; i++) {
cmd->resp[i] = get_unaligned_be32(ptr + 1 + i * 4);
dev_dbg(sdmmc_dev(host), "cmd->resp[%d] = 0x%08x\n",
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment