Commit d1b069f5 authored by Randy Dunlap's avatar Randy Dunlap Committed by Linus Torvalds

EXPERT Kconfig menu: fix broken EXPERT menu

Clean up the EXPERT menu (yet again).

Move FHANDLE and CHECKPOINT_RESTORE into the primary EXPERT menu since
they already depend on EXPERT.

Move BPF_SYSCALL and USERFAULTFD out of the EXPERT Kconfig symbols menu
list since they do not depend on EXPERT and were breaking the continuity
of that menu list.

Move all of the KALLSYMS Kconfig symbols to the end of the EXPERT menu.
This separates the kernel services from the build options.

This patch depends on [PATCH] pci: move PCI_QUIRKS to the PCI bus menu
(https://lkml.org/lkml/2017/11/2/907).

Link: http://lkml.kernel.org/r/72e4465a-a5ff-cb3c-1a90-11aa4861b161@infradead.orgSigned-off-by: default avatarRandy Dunlap <rdunlap@infradead.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>	[BPF]
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent 7016383b
...@@ -283,19 +283,6 @@ config CROSS_MEMORY_ATTACH ...@@ -283,19 +283,6 @@ config CROSS_MEMORY_ATTACH
to directly read from or write to another process' address space. to directly read from or write to another process' address space.
See the man page for more details. See the man page for more details.
config FHANDLE
bool "open by fhandle syscalls" if EXPERT
select EXPORTFS
default y
help
If you say Y here, a user level program will be able to map
file names to handle and then later use the handle for
different file system operations. This is useful in implementing
userspace file servers, which now track files using handles instead
of names. The handle would remain the same even if file names
get renamed. Enables open_by_handle_at(2) and name_to_handle_at(2)
syscalls.
config USELIB config USELIB
bool "uselib syscall" bool "uselib syscall"
def_bool ALPHA || M68K || SPARC || X86_32 || IA32_EMULATION def_bool ALPHA || M68K || SPARC || X86_32 || IA32_EMULATION
...@@ -883,18 +870,6 @@ config SOCK_CGROUP_DATA ...@@ -883,18 +870,6 @@ config SOCK_CGROUP_DATA
endif # CGROUPS endif # CGROUPS
config CHECKPOINT_RESTORE
bool "Checkpoint/restore support" if EXPERT
select PROC_CHILDREN
default n
help
Enables additional kernel features in a sake of checkpoint/restore.
In particular it adds auxiliary prctl codes to setup process text,
data and heap segment sizes, and a few additional /proc filesystem
entries.
If unsure, say N here.
menuconfig NAMESPACES menuconfig NAMESPACES
bool "Namespaces support" if EXPERT bool "Namespaces support" if EXPERT
depends on MULTIUSER depends on MULTIUSER
...@@ -1163,6 +1138,19 @@ config SYSCTL_SYSCALL ...@@ -1163,6 +1138,19 @@ config SYSCTL_SYSCALL
If unsure say N here. If unsure say N here.
config FHANDLE
bool "open by fhandle syscalls" if EXPERT
select EXPORTFS
default y
help
If you say Y here, a user level program will be able to map
file names to handle and then later use the handle for
different file system operations. This is useful in implementing
userspace file servers, which now track files using handles instead
of names. The handle would remain the same even if file names
get renamed. Enables open_by_handle_at(2) and name_to_handle_at(2)
syscalls.
config POSIX_TIMERS config POSIX_TIMERS
bool "Posix Clocks & timers" if EXPERT bool "Posix Clocks & timers" if EXPERT
default y default y
...@@ -1180,54 +1168,6 @@ config POSIX_TIMERS ...@@ -1180,54 +1168,6 @@ config POSIX_TIMERS
If unsure say y. If unsure say y.
config KALLSYMS
bool "Load all symbols for debugging/ksymoops" if EXPERT
default y
help
Say Y here to let the kernel print out symbolic crash information and
symbolic stack backtraces. This increases the size of the kernel
somewhat, as all symbols have to be loaded into the kernel image.
config KALLSYMS_ALL
bool "Include all symbols in kallsyms"
depends on DEBUG_KERNEL && KALLSYMS
help
Normally kallsyms only contains the symbols of functions for nicer
OOPS messages and backtraces (i.e., symbols from the text and inittext
sections). This is sufficient for most cases. And only in very rare
cases (e.g., when a debugger is used) all symbols are required (e.g.,
names of variables from the data sections, etc).
This option makes sure that all symbols are loaded into the kernel
image (i.e., symbols from all sections) in cost of increased kernel
size (depending on the kernel configuration, it may be 300KiB or
something like this).
Say N unless you really need all symbols.
config KALLSYMS_ABSOLUTE_PERCPU
bool
depends on KALLSYMS
default X86_64 && SMP
config KALLSYMS_BASE_RELATIVE
bool
depends on KALLSYMS
default !IA64 && !(TILE && 64BIT)
help
Instead of emitting them as absolute values in the native word size,
emit the symbol references in the kallsyms table as 32-bit entries,
each containing a relative value in the range [base, base + U32_MAX]
or, when KALLSYMS_ABSOLUTE_PERCPU is in effect, each containing either
an absolute value in the range [0, S32_MAX] or a relative value in the
range [base, base + S32_MAX], where base is the lowest relative symbol
address encountered in the image.
On 64-bit builds, this reduces the size of the address table by 50%,
but more importantly, it results in entries whose values are build
time constants, and no relocation pass is required at runtime to fix
up the entries based on the runtime load address of the kernel.
config PRINTK config PRINTK
default y default y
bool "Enable support for printk" if EXPERT bool "Enable support for printk" if EXPERT
...@@ -1339,16 +1279,6 @@ config EVENTFD ...@@ -1339,16 +1279,6 @@ config EVENTFD
If unsure, say Y. If unsure, say Y.
# syscall, maps, verifier
config BPF_SYSCALL
bool "Enable bpf() system call"
select ANON_INODES
select BPF
default n
help
Enable the bpf() system call that allows to manipulate eBPF
programs and maps via file descriptors.
config SHMEM config SHMEM
bool "Use full shmem filesystem" if EXPERT bool "Use full shmem filesystem" if EXPERT
default y default y
...@@ -1378,14 +1308,6 @@ config ADVISE_SYSCALLS ...@@ -1378,14 +1308,6 @@ config ADVISE_SYSCALLS
applications use these syscalls, you can disable this option to save applications use these syscalls, you can disable this option to save
space. space.
config USERFAULTFD
bool "Enable userfaultfd() system call"
select ANON_INODES
depends on MMU
help
Enable the userfaultfd() system call that allows to intercept and
handle page faults in userland.
config MEMBARRIER config MEMBARRIER
bool "Enable membarrier() system call" if EXPERT bool "Enable membarrier() system call" if EXPERT
default y default y
...@@ -1398,6 +1320,86 @@ config MEMBARRIER ...@@ -1398,6 +1320,86 @@ config MEMBARRIER
If unsure, say Y. If unsure, say Y.
config CHECKPOINT_RESTORE
bool "Checkpoint/restore support" if EXPERT
select PROC_CHILDREN
default n
help
Enables additional kernel features in a sake of checkpoint/restore.
In particular it adds auxiliary prctl codes to setup process text,
data and heap segment sizes, and a few additional /proc filesystem
entries.
If unsure, say N here.
config KALLSYMS
bool "Load all symbols for debugging/ksymoops" if EXPERT
default y
help
Say Y here to let the kernel print out symbolic crash information and
symbolic stack backtraces. This increases the size of the kernel
somewhat, as all symbols have to be loaded into the kernel image.
config KALLSYMS_ALL
bool "Include all symbols in kallsyms"
depends on DEBUG_KERNEL && KALLSYMS
help
Normally kallsyms only contains the symbols of functions for nicer
OOPS messages and backtraces (i.e., symbols from the text and inittext
sections). This is sufficient for most cases. And only in very rare
cases (e.g., when a debugger is used) all symbols are required (e.g.,
names of variables from the data sections, etc).
This option makes sure that all symbols are loaded into the kernel
image (i.e., symbols from all sections) in cost of increased kernel
size (depending on the kernel configuration, it may be 300KiB or
something like this).
Say N unless you really need all symbols.
config KALLSYMS_ABSOLUTE_PERCPU
bool
depends on KALLSYMS
default X86_64 && SMP
config KALLSYMS_BASE_RELATIVE
bool
depends on KALLSYMS
default !IA64 && !(TILE && 64BIT)
help
Instead of emitting them as absolute values in the native word size,
emit the symbol references in the kallsyms table as 32-bit entries,
each containing a relative value in the range [base, base + U32_MAX]
or, when KALLSYMS_ABSOLUTE_PERCPU is in effect, each containing either
an absolute value in the range [0, S32_MAX] or a relative value in the
range [base, base + S32_MAX], where base is the lowest relative symbol
address encountered in the image.
On 64-bit builds, this reduces the size of the address table by 50%,
but more importantly, it results in entries whose values are build
time constants, and no relocation pass is required at runtime to fix
up the entries based on the runtime load address of the kernel.
# end of the "standard kernel features (expert users)" menu
# syscall, maps, verifier
config BPF_SYSCALL
bool "Enable bpf() system call"
select ANON_INODES
select BPF
default n
help
Enable the bpf() system call that allows to manipulate eBPF
programs and maps via file descriptors.
config USERFAULTFD
bool "Enable userfaultfd() system call"
select ANON_INODES
depends on MMU
help
Enable the userfaultfd() system call that allows to intercept and
handle page faults in userland.
config EMBEDDED config EMBEDDED
bool "Embedded system" bool "Embedded system"
option allnoconfig_y option allnoconfig_y
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment