Merge tag 'mvebu-dt64-5.13-1' of...

Merge tag 'mvebu-dt64-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/dt

mvebu dt64 for 5.13 (part 1)

Add DT for fan control on SolidRun Clearfog GT8k platform

Add syscon compatible to NB clk node allowing improving cpufreq
support on Armada 37xx

Add support for UTMI PHY allowing removing kernel dependency from the
boot loader for UBS port connected to this PHY (Armada 7K, 8K and
CN91xx)

* tag 'mvebu-dt64-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
  arm64: dts: marvell: enable CP110 UTMI PHY usage
  arm64: dts: marvell: add support for Marvell CP110 UTMI PHY
  arm64: dts: marvell: armada-37xx: add syscon compatible to NB clk node
  arm64: dts: marvell: clearfog-gt-8k: add cooling maps
  arm64: dts: marvell: clearfog-gt-8k: add pwm-fan

Link: https://lore.kernel.org/r/874kgocs7t.fsf@BL-laptopSigned-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm64/boot/dts/marvell/armada-37xx.dtsi

@@ -156,7 +156,8 @@ uart1: serial@12200 {
 			};
 
 			nb_periph_clk: nb-periph-clk@13000 {
-				compatible = "marvell,armada-3700-periph-clock-nb";
+				compatible = "marvell,armada-3700-periph-clock-nb",
+					     "syscon";
 				reg = <0x13000 0x100>;
 				clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>,
 				<&tbg 3>, <&xtalclk>;

arch/arm64/boot/dts/marvell/armada-7040-db.dts

@@ -218,6 +218,10 @@ sata-port@1 {
 	};
 };
 
+&cp0_utmi {
+	status = "okay";
+};
+
 &cp0_comphy1 {
 	cp0_usbh0_con: connector {
 		compatible = "usb-a-connector";
@@ -226,8 +230,9 @@ cp0_usbh0_con: connector {
 };
 
 &cp0_usb3_0 {
-	phys = <&cp0_comphy1 0>;
-	phy-names = "cp0-usb3h0-comphy";
+	phys = <&cp0_comphy1 0>, <&cp0_utmi0>;
+	phy-names = "cp0-usb3h0-comphy", "utmi";
+	dr_mode = "host";
 	status = "okay";
 };
 
@@ -239,8 +244,9 @@ cp0_usbh1_con: connector {
 };
 
 &cp0_usb3_1 {
-	phys = <&cp0_comphy4 1>;
-	phy-names = "cp0-usb3h1-comphy";
+	phys = <&cp0_comphy4 1>, <&cp0_utmi1>;
+	phy-names = "cp0-usb3h1-comphy", "utmi";
+	dr_mode = "host";
 	status = "okay";
 };
 

arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts

@@ -31,6 +31,16 @@ aliases {
 		ethernet2 = &cp1_eth2;
 	};
 
+	fan: pwm {
+		compatible = "pwm-fan";
+		/* 20% steps */
+		cooling-levels = <0 51 102 153 204 255>;
+		#cooling-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp0_fan_pwm_pins>;
+		pwms = <&cp0_gpio2 16 40000>;
+	};
+
 	v_3_3: regulator-3-3v {
 		compatible = "regulator-fixed";
 		regulator-name = "v_3_3";
@@ -102,6 +112,123 @@ button_1 {
 	};
 };
 
+&ap_thermal_ic {
+	polling-delay = <1000>; /* milliseconds */
+	trips {
+		ap_active: trip-active {
+			temperature = <40000>; /* millicelsius */
+			hysteresis = <4000>; /* millicelsius */
+			type = "active";
+		};
+	};
+	cooling-maps {
+		map0 {
+			trip = <&ap_active>;
+			cooling-device = <&fan THERMAL_NO_LIMIT 4>;
+		};
+		map1 {
+			trip = <&ap_crit>;
+			cooling-device = <&fan 4 5>;
+		};
+	};
+};
+
+&cp0_thermal_ic {
+	polling-delay = <1000>; /* milliseconds */
+	trips {
+		cp0_active0: trip-active0 {
+			temperature = <40000>; /* millicelsius */
+			hysteresis = <2500>; /* millicelsius */
+			type = "active";
+		};
+		cp0_active1: trip-active1 {
+			temperature = <45000>; /* millicelsius */
+			hysteresis = <2500>; /* millicelsius */
+			type = "active";
+		};
+		cp0_active2: trip-active2 {
+			temperature = <50000>; /* millicelsius */
+			hysteresis = <2500>; /* millicelsius */
+			type = "active";
+		};
+		cp0_active3: trip-active3 {
+			temperature = <60000>; /* millicelsius */
+			hysteresis = <2500>; /* millicelsius */
+			type = "active";
+		};
+	};
+	cooling-maps {
+		map0 {
+			trip = <&cp0_active0>;
+			cooling-device = <&fan 0 1>;
+		};
+		map1 {
+			trip = <&cp0_active1>;
+			cooling-device = <&fan 1 2>;
+		};
+		map2 {
+			trip = <&cp0_active2>;
+			cooling-device = <&fan 2 3>;
+		};
+		map3 {
+			trip = <&cp0_active3>;
+			cooling-device = <&fan 3 4>;
+		};
+		map4 {
+			trip = <&cp0_crit>;
+			cooling-device = <&fan 4 5>;
+		};
+	};
+};
+
+&cp1_thermal_ic {
+	polling-delay = <1000>; /* milliseconds */
+	trips {
+		cp1_active0: trip-active0 {
+			temperature = <40000>; /* millicelsius */
+			hysteresis = <2500>; /* millicelsius */
+			type = "active";
+		};
+		cp1_active1: trip-active1 {
+			temperature = <45000>; /* millicelsius */
+			hysteresis = <2500>; /* millicelsius */
+			type = "active";
+		};
+		cp1_active2: trip-active2 {
+			temperature = <50000>; /* millicelsius */
+			hysteresis = <2500>; /* millicelsius */
+			type = "active";
+		};
+		cp1_active3: trip-active3 {
+			temperature = <60000>; /* millicelsius */
+			hysteresis = <2500>; /* millicelsius */
+			type = "active";
+		};
+	};
+	cooling-maps {
+		map0 {
+			trip = <&cp1_active0>;
+			cooling-device = <&fan 0 1>;
+		};
+		map1 {
+			trip = <&cp1_active1>;
+			cooling-device = <&fan 1 2>;
+		};
+		map2 {
+			trip = <&cp1_active2>;
+			cooling-device = <&fan 2 3>;
+		};
+		map3 {
+			trip = <&cp1_active3>;
+			cooling-device = <&fan 3 4>;
+		};
+		map4 {
+			trip = <&cp1_crit>;
+			cooling-device = <&fan 4 5>;
+		};
+	};
+};
+
 &uart0 {
 	status = "okay";
 	pinctrl-0 = <&uart0_pins>;

arch/arm64/boot/dts/marvell/armada-8040-db.dts

@@ -154,8 +154,15 @@ sata-port@1 {
 };
 
 /* CON9 on CP0 expansion */
+&cp0_utmi {
+	status = "okay";
+};
+
 &cp0_usb3_0 {
 	usb-phy = <&cp0_usb3_0_phy>;
+	phys = <&cp0_utmi0>;
+	phy-names = "utmi";
+	dr_mode = "host";
 	status = "okay";
 };
 
@@ -168,8 +175,9 @@ cp0_usbh1_con: connector {
 
 /* CON10 on CP0 expansion */
 &cp0_usb3_1 {
-	phys = <&cp0_comphy4 1>;
-	phy-names = "cp0-usb3h1-comphy";
+	phys = <&cp0_comphy4 1>, <&cp0_utmi1>;
+	phy-names = "usb", "utmi";
+	dr_mode = "host";
 	status = "okay";
 };
 
@@ -306,14 +314,23 @@ sata-port@1 {
 	};
 };
 
+&cp1_utmi {
+	status = "okay";
+};
+
 /* CON9 on CP1 expansion */
 &cp1_usb3_0 {
 	usb-phy = <&cp1_usb3_0_phy>;
+	phys = <&cp1_utmi0>;
+	phy-names = "utmi";
+	dr_mode = "host";
 	status = "okay";
 };
 
 /* CON10 on CP1 expansion */
 &cp1_usb3_1 {
+	phys = <&cp1_utmi1>;
+	phy-names = "utmi";
 	status = "okay";
 };
 

arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi

@@ -259,13 +259,23 @@ &cp0_sdhci0 {
 	vqmmc-supply = <&v_3_3>;
 };
 
+&cp0_utmi {
+	status = "okay";
+};
+
 &cp0_usb3_0 {
 	/* J38? - USB2.0 only */
+	phys = <&cp0_utmi0>;
+	phy-names = "utmi";
+	dr_mode = "host";
 	status = "okay";
 };
 
 &cp0_usb3_1 {
 	/* J38? - USB2.0 only */
+	phys = <&cp0_utmi1>;
+	phy-names = "utmi";
+	dr_mode = "host";
 	status = "okay";
 };
 
@@ -364,9 +374,14 @@ cp1_usbh0_con: connector {
 	};
 };
 
+&cp1_utmi {
+	status = "okay";
+};
+
 &cp1_usb3_0 {
 	/* CPS Lane 2 - CON7 */
-	phys = <&cp1_comphy2 0>;
-	phy-names = "cp1-usb3h0-comphy";
+	phys = <&cp1_comphy2 0>, <&cp1_utmi0>;
+	phy-names = "cp1-usb3h0-comphy", "utmi";
+	dr_mode = "host";
 	status = "okay";
 };

arch/arm64/boot/dts/marvell/armada-cp11x.dtsi

@@ -285,6 +285,25 @@ CP11X_LABEL(thermal): thermal-sensor@70 {
 			};
 		};
 
+		CP11X_LABEL(utmi): utmi@580000 {
+			compatible = "marvell,cp110-utmi-phy";
+			reg = <0x580000 0x2000>;
+			marvell,system-controller = <&CP11X_LABEL(syscon0)>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			CP11X_LABEL(utmi0): usb-phy@0 {
+				reg = <0>;
+				#phy-cells = <0>;
+			};
+
+			CP11X_LABEL(utmi1): usb-phy@1 {
+				reg = <1>;
+				#phy-cells = <0>;
+			};
+		};
+
 		CP11X_LABEL(usb3_0): usb@500000 {
 			compatible = "marvell,armada-8k-xhci",
 			"generic-xhci";

arch/arm64/boot/dts/marvell/cn9130-db.dts

@@ -392,14 +392,22 @@ nand_rb: nand-rb {
 	};
 };
 
+&cp0_utmi {
+	status = "okay";
+};
+
 &cp0_usb3_0 {
 	status = "okay";
 	usb-phy = <&cp0_usb3_0_phy0>;
-	phy-names = "usb";
+	phys = <&cp0_utmi0>;
+	phy-names = "utmi";
+	dr_mode = "host";
 };
 
 &cp0_usb3_1 {
 	status = "okay";
 	usb-phy = <&cp0_usb3_0_phy1>;
-	phy-names = "usb";
+	phys =  <&cp0_utmi1>;
+	phy-names = "utmi";
+	dr_mode = "host";
 };

arch/arm64/boot/dts/marvell/cn9131-db.dts

@@ -193,10 +193,15 @@ cp1_pcie_reset_pins: cp1-pcie-reset-pins {
 };
 
 /* CON58 */
+&cp1_utmi {
+	status = "okay";
+};
+
 &cp1_usb3_1 {
 	status = "okay";
 	usb-phy = <&cp1_usb3_0_phy0>;
 	/* Generic PHY, providing serdes lanes */
-	phys = <&cp1_comphy3 1>;
-	phy-names = "usb";
+	phys = <&cp1_comphy3 1>, <&cp1_utmi1>;
+	phy-names = "usb", "utmi";
+	dr_mode = "host";
 };

arch/arm64/boot/dts/marvell/cn9132-db.dts

@@ -205,17 +205,24 @@ cp2_sdhci_pins: cp2-sdhi-pins-0 {
 	};
 };
 
+&cp2_utmi {
+	status = "okay";
+};
+
 &cp2_usb3_0 {
 	status = "okay";
 	usb-phy = <&cp2_usb3_0_phy0>;
+	phys = <&cp2_utmi0>;
 	phy-names = "usb";
+	dr_mode = "host";
 };
 
 /* SLM-1521-V2, CON11 */
 &cp2_usb3_1 {
 	status = "okay";
 	usb-phy = <&cp2_usb3_0_phy1>;
-	phy-names = "usb";
 	/* Generic PHY, providing serdes lanes */
-	phys = <&cp2_comphy3 1>;
+	phys = <&cp2_comphy3 1>, <&cp2_utmi1>;
+	phy-names = "usb", "utmi";
+	dr_mode = "host";
 };