IB/rdmavt: Rename check_send_wqe as setup_wqe

The driver-provided function check_send_wqe allows the hardware driver to
check and set up the incoming send wqe before it is inserted into the swqe
ring. This patch will rename it as setup_wqe to better reflect its
usage. In addition, this function is only called when all setup is
complete in rdmavt.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

drivers/infiniband/hw/hfi1/qp.c

@@ -282,16 +282,21 @@ void hfi1_modify_qp(struct rvt_qp *qp, struct ib_qp_attr *attr,
 }
 
 /**
- * hfi1_check_send_wqe - validate wqe
+ * hfi1_setup_wqe - set up the wqe
  * @qp - The qp
  * @wqe - The built wqe
  * @call_send - Determine if the send should be posted or scheduled.
  *
+ * Perform setup of the wqe.  This is called
+ * prior to inserting the wqe into the ring but after
+ * the wqe has been setup by RDMAVT. This function
+ * allows the driver the opportunity to perform
+ * validation and additional setup of the wqe.
+ *
  * Returns 0 on success, -EINVAL on failure
  *
  */
-int hfi1_check_send_wqe(struct rvt_qp *qp,
-			struct rvt_swqe *wqe, bool *call_send)
+int hfi1_setup_wqe(struct rvt_qp *qp, struct rvt_swqe *wqe, bool *call_send)
 {
 	struct hfi1_ibport *ibp = to_iport(qp->ibqp.device, qp->port_num);
 	struct rvt_ah *ah;

drivers/infiniband/hw/hfi1/verbs.c

@@ -1937,7 +1937,7 @@ int hfi1_register_ib_device(struct hfi1_devdata *dd)
 	dd->verbs_dev.rdi.driver_f.check_modify_qp = hfi1_check_modify_qp;
 	dd->verbs_dev.rdi.driver_f.modify_qp = hfi1_modify_qp;
 	dd->verbs_dev.rdi.driver_f.notify_restart_rc = hfi1_restart_rc;
-	dd->verbs_dev.rdi.driver_f.check_send_wqe = hfi1_check_send_wqe;
+	dd->verbs_dev.rdi.driver_f.setup_wqe = hfi1_setup_wqe;
 	dd->verbs_dev.rdi.driver_f.comp_vect_cpu_lookup =
 						hfi1_comp_vect_mappings_lookup;
 

drivers/infiniband/hw/hfi1/verbs.h

@@ -343,8 +343,8 @@ int hfi1_check_modify_qp(struct rvt_qp *qp, struct ib_qp_attr *attr,
 void hfi1_modify_qp(struct rvt_qp *qp, struct ib_qp_attr *attr,
 		    int attr_mask, struct ib_udata *udata);
 void hfi1_restart_rc(struct rvt_qp *qp, u32 psn, int wait);
-int hfi1_check_send_wqe(struct rvt_qp *qp, struct rvt_swqe *wqe,
-			bool *call_send);
+int hfi1_setup_wqe(struct rvt_qp *qp, struct rvt_swqe *wqe,
+		   bool *call_send);
 
 extern const u32 rc_only_opcode;
 extern const u32 uc_only_opcode;

drivers/infiniband/hw/qib/qib_verbs.c

@@ -1588,7 +1588,7 @@ int qib_register_ib_device(struct qib_devdata *dd)
 	dd->verbs_dev.rdi.driver_f.port_callback = qib_create_port_files;
 	dd->verbs_dev.rdi.driver_f.get_pci_dev = qib_get_pci_dev;
 	dd->verbs_dev.rdi.driver_f.check_ah = qib_check_ah;
-	dd->verbs_dev.rdi.driver_f.check_send_wqe = qib_check_send_wqe;
+	dd->verbs_dev.rdi.driver_f.setup_wqe = qib_check_send_wqe;
 	dd->verbs_dev.rdi.driver_f.notify_new_ah = qib_notify_new_ah;
 	dd->verbs_dev.rdi.driver_f.alloc_qpn = qib_alloc_qpn;
 	dd->verbs_dev.rdi.driver_f.qp_priv_alloc = qib_qp_priv_alloc;

drivers/infiniband/sw/rdmavt/qp.c

@@ -1823,13 +1823,11 @@ static int rvt_post_one_wr(struct rvt_qp *qp,
 		wqe->wr.num_sge = j;
 	}
 
-	/* general part of wqe valid - allow for driver checks */
-	if (rdi->driver_f.check_send_wqe) {
-		ret = rdi->driver_f.check_send_wqe(qp, wqe, call_send);
-		if (ret < 0)
-			goto bail_inval_free;
-	}
-
+	/*
+	 * Calculate and set SWQE PSN values prior to handing it off
+	 * to the driver's check routine. This give the driver the
+	 * opportunity to adjust PSN values based on internal checks.
+	 */
 	log_pmtu = qp->log_pmtu;
 	if (qp->ibqp.qp_type != IB_QPT_UC &&
 	    qp->ibqp.qp_type != IB_QPT_RC) {
@@ -1854,8 +1852,18 @@ static int rvt_post_one_wr(struct rvt_qp *qp,
 				(wqe->length ?
 					((wqe->length - 1) >> log_pmtu) :
 					0);
-		qp->s_next_psn = wqe->lpsn + 1;
 	}
+
+	/* general part of wqe valid - allow for driver checks */
+	if (rdi->driver_f.setup_wqe) {
+		ret = rdi->driver_f.setup_wqe(qp, wqe, call_send);
+		if (ret < 0)
+			goto bail_inval_free_ref;
+	}
+
+	if (!(rdi->post_parms[wr->opcode].flags & RVT_OPERATION_LOCAL))
+		qp->s_next_psn = wqe->lpsn + 1;
+
 	if (unlikely(reserved_op)) {
 		wqe->wr.send_flags |= RVT_SEND_RESERVE_USED;
 		rvt_qp_wqe_reserve(qp, wqe);
@@ -1869,6 +1877,10 @@ static int rvt_post_one_wr(struct rvt_qp *qp,
 
 	return 0;
 
+bail_inval_free_ref:
+	if (qp->ibqp.qp_type != IB_QPT_UC &&
+	    qp->ibqp.qp_type != IB_QPT_RC)
+		atomic_dec(&ibah_to_rvtah(ud_wr(wr)->ah)->refcount);
 bail_inval_free:
 	/* release mr holds */
 	while (j) {

include/rdma/rdma_vt.h

@@ -215,13 +215,14 @@ struct rvt_driver_provided {
 	void (*schedule_send_no_lock)(struct rvt_qp *qp);
 
 	/*
-	 * Validate the wqe.  This needs to be done prior to inserting the
-	 * wqe into the ring, but after the wqe has been set up.  Allow for
-	 * driver specific work request checking by providing a callback.
-	 * call_send indicates if the wqe should be posted or scheduled.
+	 * Driver specific work request setup and checking.
+	 * This function is allowed to perform any setup, checks, or
+	 * adjustments required to the SWQE in order to be usable by
+	 * underlying protocols. This includes private data structure
+	 * allocations.
 	 */
-	int (*check_send_wqe)(struct rvt_qp *qp, struct rvt_swqe *wqe,
-			      bool *call_send);
+	int (*setup_wqe)(struct rvt_qp *qp, struct rvt_swqe *wqe,
+			 bool *call_send);
 
 	/*
 	 * Sometimes rdmavt needs to kick the driver's send progress. That is