Commit d2146cb2 authored by Giuseppe Coviello's avatar Giuseppe Coviello Committed by Josh Boyer

powerpc/4xx: Convert Sam440ep DTS to dts-v1

This makes the sam440ep.dts dts-v1 compliant.
Signed-off-by: default avatarGiuseppe Coviello <gicoviello@gmail.com>
Signed-off-by: default avatarJosh Boyer <jwboyer@linux.vnet.ibm.com>
parent b6014e15
......@@ -13,12 +13,13 @@
* any warranty of any kind, whether express or implied.
*/
/dts-v1/;
/ {
#address-cells = <2>;
#size-cells = <1>;
model = "acube,sam440ep";
compatible = "acube,sam440ep";
dcr-parent = <&/cpus/cpu@0>;
aliases {
ethernet0 = &EMAC0;
......@@ -39,10 +40,10 @@ cpu@0 {
reg = <0>;
clock-frequency = <0>; /* Filled in by zImage */
timebase-frequency = <0>; /* Filled in by zImage */
i-cache-line-size = <20>;
d-cache-line-size = <20>;
i-cache-size = <8000>;
d-cache-size = <8000>;
i-cache-line-size = <32>;
d-cache-line-size = <32>;
i-cache-size = <32768>;
d-cache-size = <32768>;
dcr-controller;
dcr-access-method = "native";
};
......@@ -57,7 +58,7 @@ UIC0: interrupt-controller0 {
compatible = "ibm,uic-440ep","ibm,uic";
interrupt-controller;
cell-index = <0>;
dcr-reg = <0c0 009>;
dcr-reg = <0x0c0 9>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
......@@ -67,22 +68,22 @@ UIC1: interrupt-controller1 {
compatible = "ibm,uic-440ep","ibm,uic";
interrupt-controller;
cell-index = <1>;
dcr-reg = <0d0 009>;
dcr-reg = <0x0d0 9>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
interrupts = <1e 4 1f 4>; /* cascade */
interrupts = <0x1e 4 0x1f 4>; /* cascade */
interrupt-parent = <&UIC0>;
};
SDR0: sdr {
compatible = "ibm,sdr-440ep";
dcr-reg = <00e 002>;
dcr-reg = <0x00e 2>;
};
CPR0: cpr {
compatible = "ibm,cpr-440ep";
dcr-reg = <00c 002>;
dcr-reg = <0x00c 2>;
};
plb {
......@@ -94,17 +95,17 @@ plb {
SDRAM0: sdram {
compatible = "ibm,sdram-440ep", "ibm,sdram-405gp";
dcr-reg = <010 2>;
dcr-reg = <0x010 2>;
};
DMA0: dma {
compatible = "ibm,dma-440ep", "ibm,dma-440gp";
dcr-reg = <100 027>;
dcr-reg = <0x100 0x027>;
};
MAL0: mcmal {
compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal";
dcr-reg = <180 62>;
dcr-reg = <0x180 0x062>;
num-tx-chans = <4>;
num-rx-chans = <2>;
interrupt-parent = <&MAL0>;
......@@ -112,8 +113,8 @@ MAL0: mcmal {
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
/*RXEOB*/ 1 &UIC0 b 4
interrupt-map = </*TXEOB*/ 0 &UIC0 10 4
/*RXEOB*/ 1 &UIC0 11 4
/*SERR*/ 2 &UIC1 0 4
/*TXDE*/ 3 &UIC1 1 4
/*RXDE*/ 4 &UIC1 2 4>;
......@@ -126,15 +127,15 @@ POB0: opb {
/* Bamboo is oddball in the 44x world and doesn't use the ERPN
* bits.
*/
ranges = <00000000 0 00000000 80000000
80000000 0 80000000 80000000>;
ranges = <0x00000000 0 0x00000000 0x80000000
0x80000000 0 0x80000000 0x80000000>;
interrupt-parent = <&UIC1>;
interrupts = <7 4>;
clock-frequency = <0>; /* Filled in by zImage */
EBC0: ebc {
compatible = "ibm,ebc-440ep", "ibm,ebc-440gp", "ibm,ebc";
dcr-reg = <012 2>;
dcr-reg = <0x012 2>;
#address-cells = <2>;
#size-cells = <1>;
clock-frequency = <0>; /* Filled in by zImage */
......@@ -145,10 +146,10 @@ EBC0: ebc {
UART0: serial@ef600300 {
device_type = "serial";
compatible = "ns16550";
reg = <ef600300 8>;
virtual-reg = <ef600300>;
reg = <0xef600300 8>;
virtual-reg = <0xef600300>;
clock-frequency = <0>; /* Filled in by zImage */
current-speed = <1c200>;
current-speed = <0x1c200>;
interrupt-parent = <&UIC0>;
interrupts = <0 4>;
};
......@@ -156,8 +157,8 @@ UART0: serial@ef600300 {
UART1: serial@ef600400 {
device_type = "serial";
compatible = "ns16550";
reg = <ef600400 8>;
virtual-reg = <ef600400>;
reg = <0xef600400 8>;
virtual-reg = <0xef600400>;
clock-frequency = <0>;
current-speed = <0>;
interrupt-parent = <&UIC0>;
......@@ -167,8 +168,8 @@ UART1: serial@ef600400 {
UART2: serial@ef600500 {
device_type = "serial";
compatible = "ns16550";
reg = <ef600500 8>;
virtual-reg = <ef600500>;
reg = <0xef600500 8>;
virtual-reg = <0xef600500>;
clock-frequency = <0>;
current-speed = <0>;
interrupt-parent = <&UIC0>;
......@@ -178,8 +179,8 @@ UART2: serial@ef600500 {
UART3: serial@ef600600 {
device_type = "serial";
compatible = "ns16550";
reg = <ef600600 8>;
virtual-reg = <ef600600>;
reg = <0xef600600 8>;
virtual-reg = <0xef600600>;
clock-frequency = <0>;
current-speed = <0>;
interrupt-parent = <&UIC0>;
......@@ -191,26 +192,26 @@ IIC0: i2c@ef600700 {
#size-cells = <0>;
compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
index = <0>;
reg = <ef600700 14>;
reg = <0xef600700 0x14>;
interrupt-parent = <&UIC0>;
interrupts = <2 4>;
rtc@68 {
compatible = "stm,m41t80";
reg = <68>;
reg = <0x68>;
};
};
IIC1: i2c@ef600800 {
compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
index = <5>;
reg = <ef600800 14>;
reg = <0xef600800 0x14>;
interrupt-parent = <&UIC0>;
interrupts = <7 4>;
};
ZMII0: emac-zmii@ef600d00 {
compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii";
reg = <ef600d00 c>;
reg = <0xef600d00 0xc>;
};
EMAC0: ethernet@ef600e00 {
......@@ -218,16 +219,16 @@ EMAC0: ethernet@ef600e00 {
device_type = "network";
compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
interrupt-parent = <&UIC1>;
interrupts = <1c 4 1d 4>;
reg = <ef600e00 70>;
interrupts = <0x1c 4 0x1d 4>;
reg = <0xef600e00 0x70>;
local-mac-address = [000000000000];
mal-device = <&MAL0>;
mal-tx-channel = <0 1>;
mal-rx-channel = <0>;
cell-index = <0>;
max-frame-size = <5dc>;
rx-fifo-size = <1000>;
tx-fifo-size = <800>;
max-frame-size = <0x5dc>;
rx-fifo-size = <0x1000>;
tx-fifo-size = <0x800>;
phy-mode = "rmii";
phy-map = <00000000>;
zmii-device = <&ZMII0>;
......@@ -239,16 +240,16 @@ EMAC1: ethernet@ef600f00 {
device_type = "network";
compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
interrupt-parent = <&UIC1>;
interrupts = <1e 4 1f 4>;
reg = <ef600f00 70>;
interrupts = <0x1e 4 0x1f 4>;
reg = <0xef600f00 0x70>;
local-mac-address = [000000000000];
mal-device = <&MAL0>;
mal-tx-channel = <2 3>;
mal-rx-channel = <1>;
cell-index = <1>;
max-frame-size = <5dc>;
rx-fifo-size = <1000>;
tx-fifo-size = <800>;
max-frame-size = <0x5dc>;
rx-fifo-size = <0x1000>;
tx-fifo-size = <0x800>;
phy-mode = "rmii";
phy-map = <00000000>;
zmii-device = <&ZMII0>;
......@@ -256,9 +257,9 @@ EMAC1: ethernet@ef600f00 {
};
usb@ef601000 {
compatible = "ohci-be";
reg = <ef601000 80>;
reg = <0xef601000 0x80>;
interrupts = <8 4 9 4>;
interrupt-parent = < &UIC1 >;
interrupt-parent = <&UIC1>;
};
};
......@@ -269,20 +270,20 @@ PCI0: pci@ec000000 {
#address-cells = <3>;
compatible = "ibm,plb440ep-pci", "ibm,plb-pci";
primary;
reg = <0 eec00000 8 /* Config space access */
0 eed00000 4 /* IACK */
0 eed00000 4 /* Special cycle */
0 ef400000 40>; /* Internal registers */
reg = <0 0xeec00000 8 /* Config space access */
0 0xeed00000 4 /* IACK */
0 0xeed00000 4 /* Special cycle */
0 0xef400000 0x40>; /* Internal registers */
/* Outbound ranges, one memory and one IO,
* later cannot be changed. Chip supports a second
* IO range but we don't use it for now
*/
ranges = <02000000 0 a0000000 0 a0000000 0 20000000
01000000 0 00000000 0 e8000000 0 00010000>;
ranges = <0x02000000 0 0xa0000000 0 0xa0000000 0 0x20000000
0x01000000 0 0x00000000 0 0xe8000000 0 0x00010000>;
/* Inbound 2GB range starting at 0 */
dma-ranges = <42000000 0 0 0 0 0 80000000>;
dma-ranges = <0x42000000 0 0 0 0 0 0x80000000>;
};
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment