Commit d2849fa5 authored by Mauro Carvalho Chehab's avatar Mauro Carvalho Chehab

[media] em28xx-audio: use bInterval on em28xx-audio

Just filling urb->interval with 1 is wrong, and causes a different
behaviour with xHCI.

With EHCI, the URB size is typically 192 bytes. However, as
xHCI specifies intervals in microframes, the URB size becomes
too short (24 bytes).

With this patch, the interval will be properly initialized, and
the device will behave the same if connected into a xHCI or an
EHCI device port.
Signed-off-by: default avatarMauro Carvalho Chehab <m.chehab@samsung.com>
parent d845fb3a
...@@ -620,10 +620,13 @@ static int em28xx_audio_init(struct em28xx *dev) ...@@ -620,10 +620,13 @@ static int em28xx_audio_init(struct em28xx *dev)
struct em28xx_audio *adev = &dev->adev; struct em28xx_audio *adev = &dev->adev;
struct snd_pcm *pcm; struct snd_pcm *pcm;
struct snd_card *card; struct snd_card *card;
struct usb_interface *intf;
struct usb_endpoint_descriptor *e, *ep = NULL;
static int devnr; static int devnr;
int err, i; int err, i;
const int sb_size = EM28XX_NUM_AUDIO_PACKETS * const int sb_size = EM28XX_NUM_AUDIO_PACKETS *
EM28XX_AUDIO_MAX_PACKET_SIZE; EM28XX_AUDIO_MAX_PACKET_SIZE;
u8 alt;
if (!dev->has_alsa_audio || dev->audio_ifnum < 0) { if (!dev->has_alsa_audio || dev->audio_ifnum < 0) {
/* This device does not support the extension (in this case /* This device does not support the extension (in this case
...@@ -679,6 +682,34 @@ static int em28xx_audio_init(struct em28xx *dev) ...@@ -679,6 +682,34 @@ static int em28xx_audio_init(struct em28xx *dev)
em28xx_cvol_new(card, dev, "Surround", AC97_SURROUND_MASTER); em28xx_cvol_new(card, dev, "Surround", AC97_SURROUND_MASTER);
} }
if (dev->audio_ifnum)
alt = 1;
else
alt = 7;
intf = usb_ifnum_to_if(dev->udev, dev->audio_ifnum);
if (intf->num_altsetting <= alt) {
em28xx_errdev("alt %d doesn't exist on interface %d\n",
dev->audio_ifnum, alt);
return -ENODEV;
}
for (i = 0; i < intf->altsetting[alt].desc.bNumEndpoints; i++) {
e = &intf->altsetting[alt].endpoint[i].desc;
if (!usb_endpoint_dir_in(e))
continue;
if (e->bEndpointAddress == EM28XX_EP_AUDIO) {
ep = e;
break;
}
}
if (!ep) {
em28xx_errdev("Couldn't find an audio endpoint");
return -ENODEV;
}
/* Alloc URB and transfer buffers */ /* Alloc URB and transfer buffers */
for (i = 0; i < EM28XX_AUDIO_BUFS; i++) { for (i = 0; i < EM28XX_AUDIO_BUFS; i++) {
struct urb *urb; struct urb *urb;
...@@ -707,11 +738,17 @@ static int em28xx_audio_init(struct em28xx *dev) ...@@ -707,11 +738,17 @@ static int em28xx_audio_init(struct em28xx *dev)
urb->pipe = usb_rcvisocpipe(dev->udev, EM28XX_EP_AUDIO); urb->pipe = usb_rcvisocpipe(dev->udev, EM28XX_EP_AUDIO);
urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP; urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP;
urb->transfer_buffer = dev->adev.transfer_buffer[i]; urb->transfer_buffer = dev->adev.transfer_buffer[i];
urb->interval = 1; urb->interval = 1 << (ep->bInterval - 1);
urb->complete = em28xx_audio_isocirq; urb->complete = em28xx_audio_isocirq;
urb->number_of_packets = EM28XX_NUM_AUDIO_PACKETS; urb->number_of_packets = EM28XX_NUM_AUDIO_PACKETS;
urb->transfer_buffer_length = sb_size; urb->transfer_buffer_length = sb_size;
if (!i)
dprintk("Will use ep 0x%02x on intf %d alt %d interval = %d (rcv isoc pipe: 0x%08x)\n",
EM28XX_EP_AUDIO, dev->audio_ifnum, alt,
urb->interval,
urb->pipe);
for (j = k = 0; j < EM28XX_NUM_AUDIO_PACKETS; for (j = k = 0; j < EM28XX_NUM_AUDIO_PACKETS;
j++, k += EM28XX_AUDIO_MAX_PACKET_SIZE) { j++, k += EM28XX_AUDIO_MAX_PACKET_SIZE) {
urb->iso_frame_desc[j].offset = k; urb->iso_frame_desc[j].offset = k;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment