Commit d28c74c1 authored by Josef Friedl's avatar Josef Friedl Committed by Lee Jones

power: reset: add driver for mt6323 poweroff

add poweroff driver for mt6323 and make Makefile and Kconfig-Entries
Suggested-by: default avatarFrank Wunderlich <frank-w@public-files.de>
Signed-off-by: default avatarJosef Friedl <josef.friedl@speed.at>
Signed-off-by: default avatarFrank Wunderlich <frank-w@public-files.de>
Acked-by: default avatarSebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: default avatarSean Wang <sean.wang@mediatek.com>
Signed-off-by: default avatarLee Jones <lee.jones@linaro.org>
parent 47e56812
......@@ -140,6 +140,16 @@ config POWER_RESET_LTC2952
This driver supports an external powerdown trigger and board power
down via the LTC2952. Bindings are made in the device tree.
config POWER_RESET_MT6323
bool "MediaTek MT6323 power-off driver"
depends on MFD_MT6397
help
The power-off driver is responsible for externally shutdown down
the power of a remote MediaTek SoC MT6323 is connected to through
controlling a tiny circuit BBPU inside MT6323 RTC.
Say Y if you have a board where MT6323 could be found.
config POWER_RESET_QNAP
bool "QNAP power-off driver"
depends on OF_GPIO && PLAT_ORION
......
......@@ -11,6 +11,7 @@ obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o
obj-$(CONFIG_POWER_RESET_GPIO_RESTART) += gpio-restart.o
obj-$(CONFIG_POWER_RESET_HISI) += hisi-reboot.o
obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o
obj-$(CONFIG_POWER_RESET_MT6323) += mt6323-poweroff.o
obj-$(CONFIG_POWER_RESET_QCOM_PON) += qcom-pon.o
obj-$(CONFIG_POWER_RESET_OCELOT_RESET) += ocelot-reset.o
obj-$(CONFIG_POWER_RESET_PIIX4_POWEROFF) += piix4-poweroff.o
......
// SPDX-License-Identifier: GPL-2.0
/*
* Power off through MediaTek PMIC
*
* Copyright (C) 2018 MediaTek Inc.
*
* Author: Sean Wang <sean.wang@mediatek.com>
*
*/
#include <linux/err.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/mfd/mt6397/core.h>
#include <linux/mfd/mt6397/rtc.h>
struct mt6323_pwrc {
struct device *dev;
struct regmap *regmap;
u32 base;
};
static struct mt6323_pwrc *mt_pwrc;
static void mt6323_do_pwroff(void)
{
struct mt6323_pwrc *pwrc = mt_pwrc;
unsigned int val;
int ret;
regmap_write(pwrc->regmap, pwrc->base + RTC_BBPU, RTC_BBPU_KEY);
regmap_write(pwrc->regmap, pwrc->base + RTC_WRTGR, 1);
ret = regmap_read_poll_timeout(pwrc->regmap,
pwrc->base + RTC_BBPU, val,
!(val & RTC_BBPU_CBUSY),
MTK_RTC_POLL_DELAY_US,
MTK_RTC_POLL_TIMEOUT);
if (ret)
dev_err(pwrc->dev, "failed to write BBPU: %d\n", ret);
/* Wait some time until system down, otherwise, notice with a warn */
mdelay(1000);
WARN_ONCE(1, "Unable to power off system\n");
}
static int mt6323_pwrc_probe(struct platform_device *pdev)
{
struct mt6397_chip *mt6397_chip = dev_get_drvdata(pdev->dev.parent);
struct mt6323_pwrc *pwrc;
struct resource *res;
pwrc = devm_kzalloc(&pdev->dev, sizeof(*pwrc), GFP_KERNEL);
if (!pwrc)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
pwrc->base = res->start;
pwrc->regmap = mt6397_chip->regmap;
pwrc->dev = &pdev->dev;
mt_pwrc = pwrc;
pm_power_off = &mt6323_do_pwroff;
return 0;
}
static int mt6323_pwrc_remove(struct platform_device *pdev)
{
if (pm_power_off == &mt6323_do_pwroff)
pm_power_off = NULL;
return 0;
}
static const struct of_device_id mt6323_pwrc_dt_match[] = {
{ .compatible = "mediatek,mt6323-pwrc" },
{},
};
MODULE_DEVICE_TABLE(of, mt6323_pwrc_dt_match);
static struct platform_driver mt6323_pwrc_driver = {
.probe = mt6323_pwrc_probe,
.remove = mt6323_pwrc_remove,
.driver = {
.name = "mt6323-pwrc",
.of_match_table = mt6323_pwrc_dt_match,
},
};
module_platform_driver(mt6323_pwrc_driver);
MODULE_DESCRIPTION("Poweroff driver for MT6323 PMIC");
MODULE_AUTHOR("Sean Wang <sean.wang@mediatek.com>");
MODULE_LICENSE("GPL v2");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment