Commit d2a52f67 authored by Jonas Karlman's avatar Jonas Karlman Committed by Heiko Stuebner

arm64: dts: rockchip: Rename LED related pinctrl nodes on rk3308-rock-pi-s

The nodename, <name>-gpio, of referenced pinctrl nodes for the two LEDs
on the ROCK Pi S cause DT schema validation error:

  leds: green-led-gpio: {'rockchip,pins': [[0, 6, 0, 90]], 'phandle': [[98]]} is not of type 'array'
        from schema $id: http://devicetree.org/schemas/gpio/gpio-consumer.yaml#
  leds: heartbeat-led-gpio: {'rockchip,pins': [[0, 5, 0, 90]], 'phandle': [[99]]} is not of type 'array'
        from schema $id: http://devicetree.org/schemas/gpio/gpio-consumer.yaml#

Rename the pinctrl nodes and symbols to pass DT schema validation, also
extend LED nodes with information about color and function.

Fixes: 2e04c25b ("arm64: dts: rockchip: add ROCK Pi S DTS support")
Signed-off-by: default avatarJonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20240521211029.1236094-7-jonas@kwiboo.seSigned-off-by: default avatarHeiko Stuebner <heiko@sntech.de>
parent 1fb98c85
......@@ -5,6 +5,8 @@
*/
/dts-v1/;
#include <dt-bindings/leds/common.h>
#include "rk3308.dtsi"
/ {
......@@ -24,17 +26,21 @@ chosen {
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&green_led_gio>, <&heartbeat_led_gpio>;
pinctrl-0 = <&green_led>, <&heartbeat_led>;
green-led {
color = <LED_COLOR_ID_GREEN>;
default-state = "on";
function = LED_FUNCTION_POWER;
gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
label = "rockpis:green:power";
linux,default-trigger = "default-on";
};
blue-led {
color = <LED_COLOR_ID_BLUE>;
default-state = "on";
function = LED_FUNCTION_HEARTBEAT;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
label = "rockpis:blue:user";
linux,default-trigger = "heartbeat";
......@@ -216,11 +222,11 @@ &pinctrl {
pinctrl-0 = <&rtc_32k>;
leds {
green_led_gio: green-led-gpio {
green_led: green-led {
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
};
heartbeat_led_gpio: heartbeat-led-gpio {
heartbeat_led: heartbeat-led {
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment