iio: st_sensors: fix scale configuration for h3lis331dl

fix scale configuration/parsing for h3lis331dl accel driver
when sensitivity is higher than 1(m/s^2)/digit
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
Fixes: 1e52fefc ("iio: accel: Add support for the h3lis331dl accelerometer")
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

drivers/iio/accel/st_accel_core.c

@@ -743,8 +743,8 @@ static int st_accel_read_raw(struct iio_dev *indio_dev,
 
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_SCALE:
-		*val = 0;
-		*val2 = adata->current_fullscale->gain;
+		*val = adata->current_fullscale->gain / 1000000;
+		*val2 = adata->current_fullscale->gain % 1000000;
 		return IIO_VAL_INT_PLUS_MICRO;
 	case IIO_CHAN_INFO_SAMP_FREQ:
 		*val = adata->odr;
@@ -763,9 +763,13 @@ static int st_accel_write_raw(struct iio_dev *indio_dev,
 	int err;
 
 	switch (mask) {
-	case IIO_CHAN_INFO_SCALE:
-		err = st_sensors_set_fullscale_by_gain(indio_dev, val2);
+	case IIO_CHAN_INFO_SCALE: {
+		int gain;
+
+		gain = val * 1000000 + val2;
+		err = st_sensors_set_fullscale_by_gain(indio_dev, gain);
 		break;
+	}
 	case IIO_CHAN_INFO_SAMP_FREQ:
 		if (val2)
 			return -EINVAL;

drivers/iio/common/st_sensors/st_sensors_core.c

@@ -612,7 +612,7 @@ EXPORT_SYMBOL(st_sensors_sysfs_sampling_frequency_avail);
 ssize_t st_sensors_sysfs_scale_avail(struct device *dev,
 				struct device_attribute *attr, char *buf)
 {
-	int i, len = 0;
+	int i, len = 0, q, r;
 	struct iio_dev *indio_dev = dev_get_drvdata(dev);
 	struct st_sensor_data *sdata = iio_priv(indio_dev);
 
@@ -621,8 +621,10 @@ ssize_t st_sensors_sysfs_scale_avail(struct device *dev,
 		if (sdata->sensor_settings->fs.fs_avl[i].num == 0)
 			break;
 
-		len += scnprintf(buf + len, PAGE_SIZE - len, "0.%06u ",
-				sdata->sensor_settings->fs.fs_avl[i].gain);
+		q = sdata->sensor_settings->fs.fs_avl[i].gain / 1000000;
+		r = sdata->sensor_settings->fs.fs_avl[i].gain % 1000000;
+
+		len += scnprintf(buf + len, PAGE_SIZE - len, "%u.%06u ", q, r);
 	}
 	mutex_unlock(&indio_dev->mlock);
 	buf[len - 1] = '\n';