Commit d3045064 authored by Linus Torvalds's avatar Linus Torvalds

Automatic merge of 'misc-fixes' branch from

	rsync://rsync.kernel.org/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
parents 8be3de3f 910313aa
...@@ -1274,6 +1274,9 @@ static int el3_close(struct net_device *dev) ...@@ -1274,6 +1274,9 @@ static int el3_close(struct net_device *dev)
spin_lock_irqsave(&lp->window_lock, flags); spin_lock_irqsave(&lp->window_lock, flags);
update_stats(dev); update_stats(dev);
spin_unlock_irqrestore(&lp->window_lock, flags); spin_unlock_irqrestore(&lp->window_lock, flags);
/* force interrupts off */
outw(SetIntrEnb | 0x0000, ioaddr + EL3_CMD);
} }
link->open--; link->open--;
......
...@@ -1585,8 +1585,8 @@ rtl8169_hw_start(struct net_device *dev) ...@@ -1585,8 +1585,8 @@ rtl8169_hw_start(struct net_device *dev)
RTL_W8(ChipCmd, CmdTxEnb | CmdRxEnb); RTL_W8(ChipCmd, CmdTxEnb | CmdRxEnb);
RTL_W8(EarlyTxThres, EarlyTxThld); RTL_W8(EarlyTxThres, EarlyTxThld);
/* For gigabit rtl8169, MTU + header + CRC + VLAN */ /* Low hurts. Let's disable the filtering. */
RTL_W16(RxMaxSize, tp->rx_buf_sz); RTL_W16(RxMaxSize, 16383);
/* Set Rx Config register */ /* Set Rx Config register */
i = rtl8169_rx_config | i = rtl8169_rx_config |
...@@ -2127,6 +2127,11 @@ rtl8169_tx_interrupt(struct net_device *dev, struct rtl8169_private *tp, ...@@ -2127,6 +2127,11 @@ rtl8169_tx_interrupt(struct net_device *dev, struct rtl8169_private *tp,
} }
} }
static inline int rtl8169_fragmented_frame(u32 status)
{
return (status & (FirstFrag | LastFrag)) != (FirstFrag | LastFrag);
}
static inline void rtl8169_rx_csum(struct sk_buff *skb, struct RxDesc *desc) static inline void rtl8169_rx_csum(struct sk_buff *skb, struct RxDesc *desc)
{ {
u32 opts1 = le32_to_cpu(desc->opts1); u32 opts1 = le32_to_cpu(desc->opts1);
...@@ -2177,27 +2182,41 @@ rtl8169_rx_interrupt(struct net_device *dev, struct rtl8169_private *tp, ...@@ -2177,27 +2182,41 @@ rtl8169_rx_interrupt(struct net_device *dev, struct rtl8169_private *tp,
while (rx_left > 0) { while (rx_left > 0) {
unsigned int entry = cur_rx % NUM_RX_DESC; unsigned int entry = cur_rx % NUM_RX_DESC;
struct RxDesc *desc = tp->RxDescArray + entry;
u32 status; u32 status;
rmb(); rmb();
status = le32_to_cpu(tp->RxDescArray[entry].opts1); status = le32_to_cpu(desc->opts1);
if (status & DescOwn) if (status & DescOwn)
break; break;
if (status & RxRES) { if (status & RxRES) {
printk(KERN_INFO "%s: Rx ERROR!!!\n", dev->name); printk(KERN_INFO "%s: Rx ERROR. status = %08x\n",
dev->name, status);
tp->stats.rx_errors++; tp->stats.rx_errors++;
if (status & (RxRWT | RxRUNT)) if (status & (RxRWT | RxRUNT))
tp->stats.rx_length_errors++; tp->stats.rx_length_errors++;
if (status & RxCRC) if (status & RxCRC)
tp->stats.rx_crc_errors++; tp->stats.rx_crc_errors++;
rtl8169_mark_to_asic(desc, tp->rx_buf_sz);
} else { } else {
struct RxDesc *desc = tp->RxDescArray + entry;
struct sk_buff *skb = tp->Rx_skbuff[entry]; struct sk_buff *skb = tp->Rx_skbuff[entry];
int pkt_size = (status & 0x00001FFF) - 4; int pkt_size = (status & 0x00001FFF) - 4;
void (*pci_action)(struct pci_dev *, dma_addr_t, void (*pci_action)(struct pci_dev *, dma_addr_t,
size_t, int) = pci_dma_sync_single_for_device; size_t, int) = pci_dma_sync_single_for_device;
/*
* The driver does not support incoming fragmented
* frames. They are seen as a symptom of over-mtu
* sized frames.
*/
if (unlikely(rtl8169_fragmented_frame(status))) {
tp->stats.rx_dropped++;
tp->stats.rx_length_errors++;
rtl8169_mark_to_asic(desc, tp->rx_buf_sz);
goto move_on;
}
rtl8169_rx_csum(skb, desc); rtl8169_rx_csum(skb, desc);
pci_dma_sync_single_for_cpu(tp->pci_dev, pci_dma_sync_single_for_cpu(tp->pci_dev,
...@@ -2224,7 +2243,7 @@ rtl8169_rx_interrupt(struct net_device *dev, struct rtl8169_private *tp, ...@@ -2224,7 +2243,7 @@ rtl8169_rx_interrupt(struct net_device *dev, struct rtl8169_private *tp,
tp->stats.rx_bytes += pkt_size; tp->stats.rx_bytes += pkt_size;
tp->stats.rx_packets++; tp->stats.rx_packets++;
} }
move_on:
cur_rx++; cur_rx++;
rx_left--; rx_left--;
} }
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment