Commit d31e2e84 authored by Thor Thayer's avatar Thor Thayer Committed by Borislav Petkov

ARM: dts: Add Altera L2 Cache and OCRAM EDAC entries

Add the device tree entries and bindings needed to support the Altera L2
cache and On-Chip RAM EDAC. This patch relies upon an earlier patch to
declare and setup On-chip RAM properly:

  8b907c8b ("arm: dts: socfpga: Add OCRAM node")
Signed-off-by: default avatarThor Thayer <tthayer@opensource.altera.com>
Acked-by: default avatarRob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: galak@codeaurora.org
Cc: grant.likely@linaro.org
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: ijc+devicetree@hellion.org.uk
Cc: Kumar Gala <galak@codeaurora.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux@arm.linux.org.uk
Cc: linux-doc@vger.kernel.org
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: m.chehab@samsung.com
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Russell King <linux@arm.linux.org.uk>
Link: http://lkml.kernel.org/r/1455132384-17108-2-git-send-email-tthayer@opensource.altera.comSigned-off-by: default avatarBorislav Petkov <bp@suse.de>
parent c3eea194
Altera SoCFPGA ECC Manager
This driver uses the EDAC framework to implement the SOCFPGA ECC Manager.
The ECC Manager counts and corrects single bit errors and counts/handles
double bit errors which are uncorrectable.
Required Properties:
- compatible : Should be "altr,socfpga-ecc-manager"
- #address-cells: must be 1
- #size-cells: must be 1
- ranges : standard definition, should translate from local addresses
Subcomponents:
L2 Cache ECC
Required Properties:
- compatible : Should be "altr,socfpga-l2-ecc"
- reg : Address and size for ECC error interrupt clear registers.
- interrupts : Should be single bit error interrupt, then double bit error
interrupt. Note the rising edge type.
On Chip RAM ECC
Required Properties:
- compatible : Should be "altr,socfpga-ocram-ecc"
- reg : Address and size for ECC error interrupt clear registers.
- iram : phandle to On-Chip RAM definition.
- interrupts : Should be single bit error interrupt, then double bit error
interrupt. Note the rising edge type.
Example:
eccmgr: eccmgr@ffd08140 {
compatible = "altr,socfpga-ecc-manager";
#address-cells = <1>;
#size-cells = <1>;
ranges;
l2-ecc@ffd08140 {
compatible = "altr,socfpga-l2-ecc";
reg = <0xffd08140 0x4>;
interrupts = <0 36 1>, <0 37 1>;
};
ocram-ecc@ffd08144 {
compatible = "altr,socfpga-ocram-ecc";
reg = <0xffd08144 0x4>;
iram = <&ocram>;
interrupts = <0 178 1>, <0 179 1>;
};
};
...@@ -656,6 +656,26 @@ i2c3: i2c@ffc07000 { ...@@ -656,6 +656,26 @@ i2c3: i2c@ffc07000 {
status = "disabled"; status = "disabled";
}; };
eccmgr: eccmgr@ffd08140 {
compatible = "altr,socfpga-ecc-manager";
#address-cells = <1>;
#size-cells = <1>;
ranges;
l2-ecc@ffd08140 {
compatible = "altr,socfpga-l2-ecc";
reg = <0xffd08140 0x4>;
interrupts = <0 36 1>, <0 37 1>;
};
ocram-ecc@ffd08144 {
compatible = "altr,socfpga-ocram-ecc";
reg = <0xffd08144 0x4>;
iram = <&ocram>;
interrupts = <0 178 1>, <0 179 1>;
};
};
L2: l2-cache@fffef000 { L2: l2-cache@fffef000 {
compatible = "arm,pl310-cache"; compatible = "arm,pl310-cache";
reg = <0xfffef000 0x1000>; reg = <0xfffef000 0x1000>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment