Commit d3423ed9 authored by Jakub Kicinski's avatar Jakub Kicinski

Merge branch 'selftests-mptcp-share-code-and-fix-shellcheck-warnings'

Matthieu Baerts says:

====================
selftests: mptcp: share code and fix shellcheck warnings

This series cleans MPTCP selftests code.

Patch 1 stops using 'iptables-legacy' if available, but uses 'iptables',
which is likely 'iptables-nft' behind.

Patches 2, 4 and 6 move duplicated code to mptcp_lib.sh. Patch 3 is a
preparation for patch 4, and patch 5 adds generic actions at the
creation and deletion of netns.

Patches 7 to 11 disable a few shellcheck warnings, and fix the rest, so
it is easy to spot real issues later. MPTCP CI is checking that now.

Patch 12 avoids redoing some actions at init time twice, e.g. restarting
the pm events tool.

v1: https://lore.kernel.org/r/20240305-upstream-net-next-20240304-selftests-mptcp-shared-code-shellcheck-v1-0-66618ea5504e@kernel.org
====================

Link: https://lore.kernel.org/r/20240306-upstream-net-next-20240304-selftests-mptcp-shared-code-shellcheck-v2-0-bc79e6e5e6a0@kernel.orgSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
parents c3874bbe c66fb480
#!/bin/bash
# SPDX-License-Identifier: GPL-2.0
# Double quotes to prevent globbing and word splitting is recommended in new
# code but we accept it, especially because there were too many before having
# address all other issues detected by shellcheck.
#shellcheck disable=SC2086
. "$(dirname "${0}")/mptcp_lib.sh"
sec=$(date +%s)
rndh=$(printf %x $sec)-$(mktemp -u XXXXXX)
ns="ns1-$rndh"
ksft_skip=4
ns=""
test_cnt=1
timeout_poll=30
timeout_test=$((timeout_poll * 2 + 1))
......@@ -26,25 +28,17 @@ flush_pids()
done
}
# This function is used in the cleanup trap
#shellcheck disable=SC2317
cleanup()
{
ip netns pids "${ns}" | xargs --no-run-if-empty kill -SIGKILL &>/dev/null
ip netns del $ns
mptcp_lib_ns_exit "${ns}"
}
mptcp_lib_check_mptcp
ip -Version > /dev/null 2>&1
if [ $? -ne 0 ];then
echo "SKIP: Could not run test without ip tool"
exit $ksft_skip
fi
ss -h | grep -q MPTCP
if [ $? -ne 0 ];then
echo "SKIP: ss tool does not support MPTCP"
exit $ksft_skip
fi
mptcp_lib_check_tools ip ss
get_msk_inuse()
{
......@@ -186,7 +180,7 @@ chk_msk_inuse()
expected=$((expected + listen_nr))
for _ in $(seq 10); do
if [ $(get_msk_inuse) -eq $expected ];then
if [ "$(get_msk_inuse)" -eq $expected ]; then
break
fi
sleep 0.1
......@@ -224,8 +218,7 @@ wait_connected()
}
trap cleanup EXIT
ip netns add $ns
ip -n $ns link set dev lo up
mptcp_lib_ns_init ns
echo "a" | \
timeout ${timeout_test} \
......@@ -273,7 +266,7 @@ chk_msk_inuse 0 "1->0"
chk_msk_cestab 0 "1->0"
NR_CLIENTS=100
for I in `seq 1 $NR_CLIENTS`; do
for I in $(seq 1 $NR_CLIENTS); do
echo "a" | \
timeout ${timeout_test} \
ip netns exec $ns \
......@@ -282,7 +275,7 @@ for I in `seq 1 $NR_CLIENTS`; do
done
mptcp_lib_wait_local_port_listen $ns $((NR_CLIENTS + 10001))
for I in `seq 1 $NR_CLIENTS`; do
for I in $(seq 1 $NR_CLIENTS); do
echo "b" | \
timeout ${timeout_test} \
ip netns exec $ns \
......
#!/bin/bash
# SPDX-License-Identifier: GPL-2.0
# Double quotes to prevent globbing and word splitting is recommended in new
# code but we accept it, especially because there were too many before having
# address all other issues detected by shellcheck.
#shellcheck disable=SC2086
. "$(dirname "${0}")/mptcp_lib.sh"
time_start=$(date +%s)
......@@ -13,7 +18,6 @@ sout=""
cin_disconnect=""
cin=""
cout=""
ksft_skip=4
capture=false
timeout_poll=30
timeout_test=$((timeout_poll * 2 + 1))
......@@ -121,16 +125,16 @@ while getopts "$optstring" option;do
esac
done
sec=$(date +%s)
rndh=$(printf %x $sec)-$(mktemp -u XXXXXX)
ns1="ns1-$rndh"
ns2="ns2-$rndh"
ns3="ns3-$rndh"
ns4="ns4-$rndh"
ns1=""
ns2=""
ns3=""
ns4=""
TEST_COUNT=0
TEST_GROUP=""
# This function is used in the cleanup trap
#shellcheck disable=SC2317
cleanup()
{
rm -f "$cin_disconnect" "$cout_disconnect"
......@@ -138,21 +142,12 @@ cleanup()
rm -f "$sin" "$sout"
rm -f "$capout"
local netns
for netns in "$ns1" "$ns2" "$ns3" "$ns4";do
ip netns del $netns
rm -f /tmp/$netns.{nstat,out}
done
mptcp_lib_ns_exit "${ns1}" "${ns2}" "${ns3}" "${ns4}"
}
mptcp_lib_check_mptcp
mptcp_lib_check_kallsyms
ip -Version > /dev/null 2>&1
if [ $? -ne 0 ];then
echo "SKIP: Could not run test without ip tool"
exit $ksft_skip
fi
mptcp_lib_check_tools ip
sin=$(mktemp)
sout=$(mktemp)
......@@ -163,10 +158,7 @@ cin_disconnect="$cin".disconnect
cout_disconnect="$cout".disconnect
trap cleanup EXIT
for i in "$ns1" "$ns2" "$ns3" "$ns4";do
ip netns add $i || exit $ksft_skip
ip -net $i link set lo up
done
mptcp_lib_ns_init ns1 ns2 ns3 ns4
# "$ns1" ns2 ns3 ns4
# ns1eth2 ns2eth1 ns2eth3 ns3eth2 ns3eth4 ns4eth3
......@@ -225,8 +217,9 @@ set_ethtool_flags() {
local dev="$2"
local flags="$3"
ip netns exec $ns ethtool -K $dev $flags 2>/dev/null
[ $? -eq 0 ] && echo "INFO: set $ns dev $dev: ethtool -K $flags"
if ip netns exec $ns ethtool -K $dev $flags 2>/dev/null; then
echo "INFO: set $ns dev $dev: ethtool -K $flags"
fi
}
set_random_ethtool_flags() {
......@@ -256,8 +249,8 @@ fi
check_mptcp_disabled()
{
local disabled_ns="ns_disabled-$rndh"
ip netns add ${disabled_ns} || exit $ksft_skip
local disabled_ns
mptcp_lib_ns_init disabled_ns
# net.mptcp.enabled should be enabled by default
if [ "$(ip netns exec ${disabled_ns} sysctl net.mptcp.enabled | awk '{ print $3 }')" -ne 1 ]; then
......@@ -271,7 +264,7 @@ check_mptcp_disabled()
local err=0
LC_ALL=C ip netns exec ${disabled_ns} ./mptcp_connect -p 10000 -s MPTCP 127.0.0.1 < "$cin" 2>&1 | \
grep -q "^socket: Protocol not available$" && err=1
ip netns delete ${disabled_ns}
mptcp_lib_ns_exit "${disabled_ns}"
if [ ${err} -eq 0 ]; then
echo -e "New MPTCP socket cannot be blocked via sysctl\t\t[ FAIL ]"
......@@ -321,7 +314,7 @@ do_transfer()
local extra_args="$7"
local port
port=$((10000+$TEST_COUNT))
port=$((10000+TEST_COUNT))
TEST_COUNT=$((TEST_COUNT+1))
if [ "$rcvbuf" -gt 0 ]; then
......@@ -353,6 +346,7 @@ do_transfer()
if $capture; then
local capuser
local rndh="${connector_ns:4}"
if [ -z $SUDO_USER ] ; then
capuser=""
else
......@@ -378,12 +372,18 @@ do_transfer()
nstat -n
fi
local stat_synrx_last_l=$(mptcp_lib_get_counter "${listener_ns}" "MPTcpExtMPCapableSYNRX")
local stat_ackrx_last_l=$(mptcp_lib_get_counter "${listener_ns}" "MPTcpExtMPCapableACKRX")
local stat_cookietx_last=$(mptcp_lib_get_counter "${listener_ns}" "TcpExtSyncookiesSent")
local stat_cookierx_last=$(mptcp_lib_get_counter "${listener_ns}" "TcpExtSyncookiesRecv")
local stat_csum_err_s=$(mptcp_lib_get_counter "${listener_ns}" "MPTcpExtDataCsumErr")
local stat_csum_err_c=$(mptcp_lib_get_counter "${connector_ns}" "MPTcpExtDataCsumErr")
local stat_synrx_last_l
local stat_ackrx_last_l
local stat_cookietx_last
local stat_cookierx_last
local stat_csum_err_s
local stat_csum_err_c
stat_synrx_last_l=$(mptcp_lib_get_counter "${listener_ns}" "MPTcpExtMPCapableSYNRX")
stat_ackrx_last_l=$(mptcp_lib_get_counter "${listener_ns}" "MPTcpExtMPCapableACKRX")
stat_cookietx_last=$(mptcp_lib_get_counter "${listener_ns}" "TcpExtSyncookiesSent")
stat_cookierx_last=$(mptcp_lib_get_counter "${listener_ns}" "TcpExtSyncookiesRecv")
stat_csum_err_s=$(mptcp_lib_get_counter "${listener_ns}" "MPTcpExtDataCsumErr")
stat_csum_err_c=$(mptcp_lib_get_counter "${connector_ns}" "MPTcpExtDataCsumErr")
timeout ${timeout_test} \
ip netns exec ${listener_ns} \
......@@ -446,11 +446,16 @@ do_transfer()
mptcp_lib_check_transfer $cin $sout "file received by server"
rets=$?
local stat_synrx_now_l=$(mptcp_lib_get_counter "${listener_ns}" "MPTcpExtMPCapableSYNRX")
local stat_ackrx_now_l=$(mptcp_lib_get_counter "${listener_ns}" "MPTcpExtMPCapableACKRX")
local stat_cookietx_now=$(mptcp_lib_get_counter "${listener_ns}" "TcpExtSyncookiesSent")
local stat_cookierx_now=$(mptcp_lib_get_counter "${listener_ns}" "TcpExtSyncookiesRecv")
local stat_ooo_now=$(mptcp_lib_get_counter "${listener_ns}" "TcpExtTCPOFOQueue")
local stat_synrx_now_l
local stat_ackrx_now_l
local stat_cookietx_now
local stat_cookierx_now
local stat_ooo_now
stat_synrx_now_l=$(mptcp_lib_get_counter "${listener_ns}" "MPTcpExtMPCapableSYNRX")
stat_ackrx_now_l=$(mptcp_lib_get_counter "${listener_ns}" "MPTcpExtMPCapableACKRX")
stat_cookietx_now=$(mptcp_lib_get_counter "${listener_ns}" "TcpExtSyncookiesSent")
stat_cookierx_now=$(mptcp_lib_get_counter "${listener_ns}" "TcpExtSyncookiesRecv")
stat_ooo_now=$(mptcp_lib_get_counter "${listener_ns}" "TcpExtTCPOFOQueue")
expect_synrx=$((stat_synrx_last_l))
expect_ackrx=$((stat_ackrx_last_l))
......@@ -459,8 +464,8 @@ do_transfer()
cookies=${cookies##*=}
if [ ${cl_proto} = "MPTCP" ] && [ ${srv_proto} = "MPTCP" ]; then
expect_synrx=$((stat_synrx_last_l+$connect_per_transfer))
expect_ackrx=$((stat_ackrx_last_l+$connect_per_transfer))
expect_synrx=$((stat_synrx_last_l+connect_per_transfer))
expect_ackrx=$((stat_ackrx_last_l+connect_per_transfer))
fi
if [ ${stat_synrx_now_l} -lt ${expect_synrx} ]; then
......@@ -468,7 +473,7 @@ do_transfer()
"${stat_synrx_now_l}" "${expect_synrx}" 1>&2
retc=1
fi
if [ ${stat_ackrx_now_l} -lt ${expect_ackrx} -a ${stat_ooo_now} -eq 0 ]; then
if [ ${stat_ackrx_now_l} -lt ${expect_ackrx} ] && [ ${stat_ooo_now} -eq 0 ]; then
if [ ${stat_ooo_now} -eq 0 ]; then
printf "[ FAIL ] lower MPC ACK rx (%d) than expected (%d)\n" \
"${stat_ackrx_now_l}" "${expect_ackrx}" 1>&2
......@@ -479,18 +484,20 @@ do_transfer()
fi
if $checksum; then
local csum_err_s=$(mptcp_lib_get_counter "${listener_ns}" "MPTcpExtDataCsumErr")
local csum_err_c=$(mptcp_lib_get_counter "${connector_ns}" "MPTcpExtDataCsumErr")
local csum_err_s
local csum_err_c
csum_err_s=$(mptcp_lib_get_counter "${listener_ns}" "MPTcpExtDataCsumErr")
csum_err_c=$(mptcp_lib_get_counter "${connector_ns}" "MPTcpExtDataCsumErr")
local csum_err_s_nr=$((csum_err_s - stat_csum_err_s))
if [ $csum_err_s_nr -gt 0 ]; then
printf "[ FAIL ]\nserver got $csum_err_s_nr data checksum error[s]"
printf "[ FAIL ]\nserver got %d data checksum error[s]" ${csum_err_s_nr}
rets=1
fi
local csum_err_c_nr=$((csum_err_c - stat_csum_err_c))
if [ $csum_err_c_nr -gt 0 ]; then
printf "[ FAIL ]\nclient got $csum_err_c_nr data checksum error[s]"
printf "[ FAIL ]\nclient got %d data checksum error[s]" ${csum_err_c_nr}
retc=1
fi
fi
......@@ -658,7 +665,7 @@ run_test_transparent()
return
fi
ip netns exec "$listener_ns" nft -f /dev/stdin <<"EOF"
if ! ip netns exec "$listener_ns" nft -f /dev/stdin <<"EOF"
flush ruleset
table inet mangle {
chain divert {
......@@ -669,7 +676,7 @@ table inet mangle {
}
}
EOF
if [ $? -ne 0 ]; then
then
echo "SKIP: $msg, could not load nft ruleset"
mptcp_lib_fail_if_expected_feature "nft rules"
mptcp_lib_result_skip "${TEST_GROUP}"
......@@ -684,8 +691,7 @@ EOF
local_addr="0.0.0.0"
fi
ip -net "$listener_ns" $r6flag rule add fwmark 1 lookup 100
if [ $? -ne 0 ]; then
if ! ip -net "$listener_ns" $r6flag rule add fwmark 1 lookup 100; then
ip netns exec "$listener_ns" nft flush ruleset
echo "SKIP: $msg, ip $r6flag rule failed"
mptcp_lib_fail_if_expected_feature "ip rule"
......@@ -693,8 +699,7 @@ EOF
return
fi
ip -net "$listener_ns" route add local $local_addr/0 dev lo table 100
if [ $? -ne 0 ]; then
if ! ip -net "$listener_ns" route add local $local_addr/0 dev lo table 100; then
ip netns exec "$listener_ns" nft flush ruleset
ip -net "$listener_ns" $r6flag rule del fwmark 1 lookup 100
echo "SKIP: $msg, ip route add local $local_addr failed"
......@@ -857,7 +862,7 @@ stop_if_error "Could not even run ping tests"
echo -n "INFO: Using loss of $tc_loss "
test "$tc_delay" -gt 0 && echo -n "delay $tc_delay ms "
reorder_delay=$(($tc_delay / 4))
reorder_delay=$((tc_delay / 4))
if [ -z "${tc_reorder}" ]; then
reorder1=$((RANDOM%10))
......
......@@ -86,21 +86,11 @@ init_partial()
{
capout=$(mktemp)
local sec rndh
sec=$(date +%s)
rndh=$(printf %x $sec)-$(mktemp -u XXXXXX)
ns1="ns1-$rndh"
ns2="ns2-$rndh"
mptcp_lib_ns_init ns1 ns2
local netns
for netns in "$ns1" "$ns2"; do
ip netns add $netns || exit $ksft_skip
ip -net $netns link set lo up
ip netns exec $netns sysctl -q net.mptcp.enabled=1
ip netns exec $netns sysctl -q net.mptcp.pm_type=0 2>/dev/null || true
ip netns exec $netns sysctl -q net.ipv4.conf.all.rp_filter=0
ip netns exec $netns sysctl -q net.ipv4.conf.default.rp_filter=0
if $checksum; then
ip netns exec $netns sysctl -q net.mptcp.checksum_enabled=1
fi
......@@ -145,45 +135,15 @@ cleanup_partial()
{
rm -f "$capout"
local netns
for netns in "$ns1" "$ns2"; do
ip netns del $netns
rm -f /tmp/$netns.{nstat,out}
done
}
check_tools()
{
mptcp_lib_check_mptcp
mptcp_lib_check_kallsyms
if ! ip -Version &> /dev/null; then
echo "SKIP: Could not run test without ip tool"
exit $ksft_skip
fi
if ! ss -h | grep -q MPTCP; then
echo "SKIP: ss tool does not support MPTCP"
exit $ksft_skip
fi
# Use the legacy version if available to support old kernel versions
if iptables-legacy -V &> /dev/null; then
iptables="iptables-legacy"
ip6tables="ip6tables-legacy"
elif ! iptables -V &> /dev/null; then
echo "SKIP: Could not run all tests without iptables tool"
exit $ksft_skip
elif ! ip6tables -V &> /dev/null; then
echo "SKIP: Could not run all tests without ip6tables tool"
exit $ksft_skip
fi
mptcp_lib_ns_exit "${ns1}" "${ns2}"
}
init() {
init=1
check_tools
mptcp_lib_check_mptcp
mptcp_lib_check_kallsyms
mptcp_lib_check_tools ip ss "${iptables}" "${ip6tables}"
sin=$(mktemp)
sout=$(mktemp)
......@@ -470,12 +430,8 @@ reset_with_events()
{
reset "${1}" || return 1
:> "$evts_ns1"
:> "$evts_ns2"
ip netns exec $ns1 ./pm_nl_ctl events >> "$evts_ns1" 2>&1 &
evts_ns1_pid=$!
ip netns exec $ns2 ./pm_nl_ctl events >> "$evts_ns2" 2>&1 &
evts_ns2_pid=$!
mptcp_lib_events "${ns1}" "${evts_ns1}" evts_ns1_pid
mptcp_lib_events "${ns2}" "${evts_ns2}" evts_ns2_pid
}
reset_with_tcp_filter()
......@@ -648,7 +604,9 @@ wait_mpj()
kill_events_pids()
{
mptcp_lib_kill_wait $evts_ns1_pid
evts_ns1_pid=0
mptcp_lib_kill_wait $evts_ns2_pid
evts_ns2_pid=0
}
pm_nl_set_limits()
......
......@@ -342,3 +342,71 @@ mptcp_lib_check_output() {
return 1
fi
}
mptcp_lib_check_tools() {
local tool
for tool in "${@}"; do
case "${tool}" in
"ip")
if ! ip -Version &> /dev/null; then
mptcp_lib_print_warn "SKIP: Could not run test without ip tool"
exit ${KSFT_SKIP}
fi
;;
"ss")
if ! ss -h | grep -q MPTCP; then
mptcp_lib_print_warn "SKIP: ss tool does not support MPTCP"
exit ${KSFT_SKIP}
fi
;;
"iptables"* | "ip6tables"*)
if ! "${tool}" -V &> /dev/null; then
mptcp_lib_print_warn "SKIP: Could not run all tests without ${tool}"
exit ${KSFT_SKIP}
fi
;;
*)
mptcp_lib_print_err "Internal error: unsupported tool: ${tool}"
exit ${KSFT_FAIL}
;;
esac
done
}
mptcp_lib_ns_init() {
local sec rndh
sec=$(date +%s)
rndh=$(printf %x "${sec}")-$(mktemp -u XXXXXX)
local netns
for netns in "${@}"; do
eval "${netns}=${netns}-${rndh}"
ip netns add "${!netns}" || exit ${KSFT_SKIP}
ip -net "${!netns}" link set lo up
ip netns exec "${!netns}" sysctl -q net.mptcp.enabled=1
ip netns exec "${!netns}" sysctl -q net.ipv4.conf.all.rp_filter=0
ip netns exec "${!netns}" sysctl -q net.ipv4.conf.default.rp_filter=0
done
}
mptcp_lib_ns_exit() {
local netns
for netns in "${@}"; do
ip netns del "${netns}"
rm -f /tmp/"${netns}".{nstat,out}
done
}
mptcp_lib_events() {
local ns="${1}"
local evts="${2}"
declare -n pid="${3}"
:>"${evts}"
mptcp_lib_kill_wait "${pid:-0}"
ip netns exec "${ns}" ./pm_nl_ctl events >> "${evts}" 2>&1 &
pid=$!
}
#!/bin/bash
# SPDX-License-Identifier: GPL-2.0
# Double quotes to prevent globbing and word splitting is recommended in new
# code but we accept it, especially because there were too many before having
# address all other issues detected by shellcheck.
#shellcheck disable=SC2086
. "$(dirname "${0}")/mptcp_lib.sh"
ret=0
......@@ -8,17 +13,14 @@ sin=""
sout=""
cin=""
cout=""
ksft_skip=4
timeout_poll=30
timeout_test=$((timeout_poll * 2 + 1))
iptables="iptables"
ip6tables="ip6tables"
sec=$(date +%s)
rndh=$(printf %x $sec)-$(mktemp -u XXXXXX)
ns1="ns1-$rndh"
ns2="ns2-$rndh"
ns_sbox="ns_sbox-$rndh"
ns1=""
ns2=""
ns_sbox=""
add_mark_rules()
{
......@@ -40,17 +42,10 @@ add_mark_rules()
init()
{
local netns
for netns in "$ns1" "$ns2" "$ns_sbox";do
ip netns add $netns || exit $ksft_skip
ip -net $netns link set lo up
ip netns exec $netns sysctl -q net.mptcp.enabled=1
ip netns exec $netns sysctl -q net.ipv4.conf.all.rp_filter=0
ip netns exec $netns sysctl -q net.ipv4.conf.default.rp_filter=0
done
mptcp_lib_ns_init ns1 ns2 ns_sbox
local i
for i in `seq 1 4`; do
for i in $(seq 1 4); do
ip link add ns1eth$i netns "$ns1" type veth peer name ns2eth$i netns "$ns2"
ip -net "$ns1" addr add 10.0.$i.1/24 dev ns1eth$i
ip -net "$ns1" addr add dead:beef:$i::1/64 dev ns1eth$i nodad
......@@ -77,36 +72,18 @@ init()
add_mark_rules $ns2 2
}
# This function is used in the cleanup trap
#shellcheck disable=SC2317
cleanup()
{
local netns
for netns in "$ns1" "$ns2" "$ns_sbox"; do
ip netns del $netns
done
mptcp_lib_ns_exit "${ns1}" "${ns2}" "${ns_sbox}"
rm -f "$cin" "$cout"
rm -f "$sin" "$sout"
}
mptcp_lib_check_mptcp
mptcp_lib_check_kallsyms
ip -Version > /dev/null 2>&1
if [ $? -ne 0 ];then
echo "SKIP: Could not run test without ip tool"
exit $ksft_skip
fi
# Use the legacy version if available to support old kernel versions
if iptables-legacy -V &> /dev/null; then
iptables="iptables-legacy"
ip6tables="ip6tables-legacy"
elif ! iptables -V &> /dev/null; then
echo "SKIP: Could not run all tests without iptables tool"
exit $ksft_skip
elif ! ip6tables -V &> /dev/null; then
echo "SKIP: Could not run all tests without ip6tables tool"
exit $ksft_skip
fi
mptcp_lib_check_tools ip "${iptables}" "${ip6tables}"
check_mark()
{
......@@ -286,12 +263,12 @@ do_tcpinq_test()
local lret=$?
if [ $lret -ne 0 ];then
ret=$lret
echo "FAIL: mptcp_inq $@" 1>&2
echo "FAIL: mptcp_inq $*" 1>&2
mptcp_lib_result_fail "TCP_INQ: $*"
return $lret
fi
echo "PASS: TCP_INQ cmsg/ioctl $@"
echo "PASS: TCP_INQ cmsg/ioctl $*"
mptcp_lib_result_pass "TCP_INQ: $*"
return $lret
}
......
#!/bin/bash
# SPDX-License-Identifier: GPL-2.0
# Double quotes to prevent globbing and word splitting is recommended in new
# code but we accept it, especially because there were too many before having
# address all other issues detected by shellcheck.
#shellcheck disable=SC2086
. "$(dirname "${0}")/mptcp_lib.sh"
ksft_skip=4
ret=0
usage() {
echo "Usage: $0 [ -h ]"
}
optstring=h
while getopts "$optstring" option;do
case "$option" in
"h")
......@@ -24,30 +28,23 @@ while getopts "$optstring" option;do
esac
done
sec=$(date +%s)
rndh=$(printf %x $sec)-$(mktemp -u XXXXXX)
ns1="ns1-$rndh"
ns1=""
err=$(mktemp)
# This function is used in the cleanup trap
#shellcheck disable=SC2317
cleanup()
{
rm -f $err
ip netns del $ns1
mptcp_lib_ns_exit "${ns1}"
}
mptcp_lib_check_mptcp
ip -Version > /dev/null 2>&1
if [ $? -ne 0 ];then
echo "SKIP: Could not run test without ip tool"
exit $ksft_skip
fi
mptcp_lib_check_tools ip
trap cleanup EXIT
ip netns add $ns1 || exit $ksft_skip
ip -net $ns1 link set lo up
ip netns exec $ns1 sysctl -q net.mptcp.enabled=1
mptcp_lib_ns_init ns1
check()
{
......@@ -100,14 +97,14 @@ check "ip netns exec $ns1 ./pm_nl_ctl get 4" "" "duplicate addr"
ip netns exec $ns1 ./pm_nl_ctl add 10.0.1.4 flags signal
check "ip netns exec $ns1 ./pm_nl_ctl get 4" "id 4 flags signal 10.0.1.4" "id addr increment"
for i in `seq 5 9`; do
for i in $(seq 5 9); do
ip netns exec $ns1 ./pm_nl_ctl add 10.0.1.$i flags signal >/dev/null 2>&1
done
check "ip netns exec $ns1 ./pm_nl_ctl get 9" "id 9 flags signal 10.0.1.9" "hard addr limit"
check "ip netns exec $ns1 ./pm_nl_ctl get 10" "" "above hard addr limit"
ip netns exec $ns1 ./pm_nl_ctl del 9
for i in `seq 10 255`; do
for i in $(seq 10 255); do
ip netns exec $ns1 ./pm_nl_ctl add 10.0.0.9 id $i
ip netns exec $ns1 ./pm_nl_ctl del $i
done
......
#!/bin/bash
# SPDX-License-Identifier: GPL-2.0
# Double quotes to prevent globbing and word splitting is recommended in new
# code but we accept it, especially because there were too many before having
# address all other issues detected by shellcheck.
#shellcheck disable=SC2086
. "$(dirname "${0}")/mptcp_lib.sh"
sec=$(date +%s)
rndh=$(printf %x $sec)-$(mktemp -u XXXXXX)
ns1="ns1-$rndh"
ns2="ns2-$rndh"
ns3="ns3-$rndh"
ns1=""
ns2=""
ns3=""
capture=false
ksft_skip=4
timeout_poll=30
timeout_test=$((timeout_poll * 2 + 1))
test_cnt=1
......@@ -30,25 +32,19 @@ usage() {
echo -e "\t-d: debug this script"
}
# This function is used in the cleanup trap
#shellcheck disable=SC2317
cleanup()
{
rm -f "$cout" "$sout"
rm -f "$large" "$small"
rm -f "$capout"
local netns
for netns in "$ns1" "$ns2" "$ns3";do
ip netns del $netns
done
mptcp_lib_ns_exit "${ns1}" "${ns2}" "${ns3}"
}
mptcp_lib_check_mptcp
ip -Version > /dev/null 2>&1
if [ $? -ne 0 ];then
echo "SKIP: Could not run test without ip tool"
exit $ksft_skip
fi
mptcp_lib_check_tools ip
# "$ns1" ns2 ns3
# ns1eth1 ns2eth1 ns2eth3 ns3eth1
......@@ -70,12 +66,7 @@ setup()
trap cleanup EXIT
for i in "$ns1" "$ns2" "$ns3";do
ip netns add $i || exit $ksft_skip
ip -net $i link set lo up
ip netns exec $i sysctl -q net.ipv4.conf.all.rp_filter=0
ip netns exec $i sysctl -q net.ipv4.conf.default.rp_filter=0
done
mptcp_lib_ns_init ns1 ns2 ns3
ip link add ns1eth1 netns "$ns1" type veth peer name ns2eth1 netns "$ns2"
ip link add ns1eth2 netns "$ns1" type veth peer name ns2eth2 netns "$ns2"
......@@ -135,7 +126,7 @@ do_transfer()
local sin=$2
local max_time=$3
local port
port=$((10000+$test_cnt))
port=$((10000+test_cnt))
test_cnt=$((test_cnt+1))
:> "$cout"
......@@ -144,6 +135,7 @@ do_transfer()
if $capture; then
local capuser
local rndh="${ns1:4}"
if [ -z $SUDO_USER ] ; then
capuser=""
else
......
......@@ -17,11 +17,7 @@ if ! mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then
echo "userspace pm tests are not supported by the kernel: SKIP"
exit ${KSFT_SKIP}
fi
if ! ip -Version &> /dev/null; then
echo "SKIP: Cannot not run test without ip tool"
exit ${KSFT_SKIP}
fi
mptcp_lib_check_tools ip
ANNOUNCED=6 # MPTCP_EVENT_ANNOUNCED
REMOVED=7 # MPTCP_EVENT_REMOVED
......@@ -54,10 +50,8 @@ app6_port=50004
client_addr_id=${RANDOM:0:2}
server_addr_id=${RANDOM:0:2}
sec=$(date +%s)
rndh=$(printf %x "$sec")-$(mktemp -u XXXXXX)
ns1="ns1-$rndh"
ns2="ns2-$rndh"
ns1=""
ns2=""
ret=0
test_name=""
......@@ -122,10 +116,7 @@ cleanup()
mptcp_lib_kill_wait $pid
done
local netns
for netns in "$ns1" "$ns2" ;do
ip netns del "$netns"
done
mptcp_lib_ns_exit "${ns1}" "${ns2}"
rm -rf $file $client_evts $server_evts
......@@ -135,10 +126,8 @@ cleanup()
trap cleanup EXIT
# Create and configure network namespaces for testing
mptcp_lib_ns_init ns1 ns2
for i in "$ns1" "$ns2" ;do
ip netns add "$i" || exit 1
ip -net "$i" link set lo up
ip netns exec "$i" sysctl -q net.mptcp.enabled=1
ip netns exec "$i" sysctl -q net.mptcp.pm_type=1
done
......@@ -160,17 +149,23 @@ ip -net "$ns2" addr add dead:beef:1::2/64 dev ns2eth1 nodad
ip -net "$ns2" addr add dead:beef:2::2/64 dev ns2eth1 nodad
ip -net "$ns2" link set ns2eth1 up
file=$(mktemp)
mptcp_lib_make_file "$file" 2 1
# Capture netlink events over the two network namespaces running
# the MPTCP client and server
client_evts=$(mktemp)
mptcp_lib_events "${ns2}" "${client_evts}" client_evts_pid
server_evts=$(mktemp)
mptcp_lib_events "${ns1}" "${server_evts}" server_evts_pid
sleep 0.5
print_title "Init"
print_test "Created network namespaces ns1, ns2"
test_pass
make_connection()
{
if [ -z "$file" ]; then
file=$(mktemp)
fi
mptcp_lib_make_file "$file" 2 1
local is_v6=$1
local app_port=$app4_port
local connect_addr="10.0.1.1"
......@@ -184,27 +179,8 @@ make_connection()
is_v6="v4"
fi
# Capture netlink events over the two network namespaces running
# the MPTCP client and server
if [ -z "$client_evts" ]; then
client_evts=$(mktemp)
fi
:>"$client_evts"
if [ $client_evts_pid -ne 0 ]; then
mptcp_lib_kill_wait $client_evts_pid
fi
ip netns exec "$ns2" ./pm_nl_ctl events >> "$client_evts" 2>&1 &
client_evts_pid=$!
if [ -z "$server_evts" ]; then
server_evts=$(mktemp)
fi
:>"$server_evts"
if [ $server_evts_pid -ne 0 ]; then
mptcp_lib_kill_wait $server_evts_pid
fi
ip netns exec "$ns1" ./pm_nl_ctl events >> "$server_evts" 2>&1 &
server_evts_pid=$!
sleep 0.5
# Run the server
ip netns exec "$ns1" \
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment