ARM: lpc32xx: clean up header files

All device drivers have stopped relying on mach/*.h headers,
so move the remaining headers into arch/arm/mach-lpc32xx/lpc32xx.h
to prepare for multiplatform builds.

The mach/entry-macro.S file has been unused for a long time now
and can simply get removed.

Link: https://lore.kernel.org/r/20190809144043.476786-13-arnd@arndb.deAcked-by: Sylvain Lemieux <slemieux.tyco@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/mach-lpc32xx/common.c

@@ -13,8 +13,7 @@
 #include <asm/mach/map.h>
 #include <asm/system_info.h>
 
-#include <mach/hardware.h>
-#include <mach/platform.h>
+#include "lpc32xx.h"
 #include "common.h"
 
 /*

arch/arm/mach-lpc32xx/include/mach/entry-macro.S

-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * arch/arm/mach-lpc32xx/include/mach/entry-macro.S
- *
- * Author: Kevin Wells <kevin.wells@nxp.com>
- *
- * Copyright (C) 2010 NXP Semiconductors
- */
-
-#include <mach/hardware.h>
-#include <mach/platform.h>
-
-#define LPC32XX_INTC_MASKED_STATUS_OFS	0x8
-
-	.macro  get_irqnr_preamble, base, tmp
-	ldr	\base, =IO_ADDRESS(LPC32XX_MIC_BASE)
-	.endm
-
-/*
- * Return IRQ number in irqnr. Also return processor Z flag status in CPSR
- * as set if an interrupt is pending.
- */
-	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-	ldr	\irqstat, [\base, #LPC32XX_INTC_MASKED_STATUS_OFS]
-	clz	\irqnr, \irqstat
-	rsb	\irqnr, \irqnr, #31
-	teq	\irqstat, #0
-	.endm

arch/arm/mach-lpc32xx/include/mach/hardware.h

-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * arch/arm/mach-lpc32xx/include/mach/hardware.h
- *
- * Copyright (c) 2005 MontaVista Software, Inc. <source@mvista.com>
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-/*
- * Start of virtual addresses for IO devices
- */
-#define IO_BASE		0xF0000000
-
-/*
- * This macro relies on fact that for all HW i/o addresses bits 20-23 are 0
- */
-#define IO_ADDRESS(x)	IOMEM(((((x) & 0xff000000) >> 4) | ((x) & 0xfffff)) |\
-			 IO_BASE)
-
-#define io_p2v(x)	((void __iomem *) (unsigned long) IO_ADDRESS(x))
-#define io_v2p(x)	((((x) & 0x0ff00000) << 4) | ((x) & 0x000fffff))
-
-#endif

arch/arm/mach-lpc32xx/include/mach/uncompress.h

@@ -12,15 +12,13 @@
 
 #include <linux/io.h>
 
-#include <mach/hardware.h>
-#include <mach/platform.h>
-
 /*
  * Uncompress output is hardcoded to standard UART 5
  */
 
 #define UART_FIFO_CTL_TX_RESET	(1 << 2)
 #define UART_STATUS_TX_MT	(1 << 6)
+#define LPC32XX_UART5_BASE	0x40090000
 
 #define _UARTREG(x)		(void __iomem *)(LPC32XX_UART5_BASE + (x))
 

arch/arm/mach-lpc32xx/include/mach/platform.h → arch/arm/mach-lpc32xx/lpc32xx.h

@@ -7,8 +7,8 @@
  * Copyright (C) 2010 NXP Semiconductors
  */
 
-#ifndef __ASM_ARCH_PLATFORM_H
-#define __ASM_ARCH_PLATFORM_H
+#ifndef __ARM_LPC32XX_H
+#define __ARM_LPC32XX_H
 
 #define _SBF(f, v)				((v) << (f))
 #define _BIT(n)					_SBF(n, 1)
@@ -700,4 +700,18 @@
 #define LPC32XX_USB_OTG_DEV_CLOCK_ON	_BIT(1)
 #define LPC32XX_USB_OTG_HOST_CLOCK_ON	_BIT(0)
 
+/*
+ * Start of virtual addresses for IO devices
+ */
+#define IO_BASE		0xF0000000
+
+/*
+ * This macro relies on fact that for all HW i/o addresses bits 20-23 are 0
+ */
+#define IO_ADDRESS(x)	IOMEM(((((x) & 0xff000000) >> 4) | ((x) & 0xfffff)) |\
+			 IO_BASE)
+
+#define io_p2v(x)	((void __iomem *) (unsigned long) IO_ADDRESS(x))
+#define io_v2p(x)	((((x) & 0x0ff00000) << 4) | ((x) & 0x000fffff))
+
 #endif

arch/arm/mach-lpc32xx/pm.c

@@ -70,8 +70,7 @@
 
 #include <asm/cacheflush.h>
 
-#include <mach/hardware.h>
-#include <mach/platform.h>
+#include "lpc32xx.h"
 #include "common.h"
 
 #define TEMP_IRAM_AREA  IO_ADDRESS(LPC32XX_IRAM_BASE)

arch/arm/mach-lpc32xx/serial.c

@@ -16,8 +16,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include <mach/hardware.h>
-#include <mach/platform.h>
+#include "lpc32xx.h"
 #include "common.h"
 
 #define LPC32XX_SUART_FIFO_SIZE	64

arch/arm/mach-lpc32xx/suspend.S

@@ -11,8 +11,7 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <mach/platform.h>
-#include <mach/hardware.h>
+#include "lpc32xx.h"
 
 /* Using named register defines makes the code easier to follow */
 #define WORK1_REG			r0