Commit d3bd1b4c authored by David S. Miller's avatar David S. Miller
parents 28801f35 0bf719df
......@@ -41,6 +41,9 @@ static struct usb_device_id ath3k_table[] = {
/* Atheros AR9285 Malbec with sflash firmware */
{ USB_DEVICE(0x03F0, 0x311D) },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE02C) },
{ } /* Terminating entry */
};
......
......@@ -105,6 +105,9 @@ static struct usb_device_id blacklist_table[] = {
/* Atheros AR9285 Malbec with sflash firmware */
{ USB_DEVICE(0x03f0, 0x311d), .driver_info = BTUSB_IGNORE },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
/* Broadcom BCM2035 */
{ USB_DEVICE(0x0a5c, 0x2035), .driver_info = BTUSB_WRONG_SCO_MTU },
{ USB_DEVICE(0x0a5c, 0x200a), .driver_info = BTUSB_WRONG_SCO_MTU },
......@@ -829,7 +832,7 @@ static void btusb_work(struct work_struct *work)
if (hdev->conn_hash.sco_num > 0) {
if (!test_bit(BTUSB_DID_ISO_RESUME, &data->flags)) {
err = usb_autopm_get_interface(data->isoc);
err = usb_autopm_get_interface(data->isoc ? data->isoc : data->intf);
if (err < 0) {
clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
usb_kill_anchored_urbs(&data->isoc_anchor);
......@@ -858,7 +861,7 @@ static void btusb_work(struct work_struct *work)
__set_isoc_interface(hdev, 0);
if (test_and_clear_bit(BTUSB_DID_ISO_RESUME, &data->flags))
usb_autopm_put_interface(data->isoc);
usb_autopm_put_interface(data->isoc ? data->isoc : data->intf);
}
}
......
......@@ -282,6 +282,34 @@ int ath5k_hw_phy_disable(struct ath5k_hw *ah)
return 0;
}
/*
* Wait for synth to settle
*/
static void ath5k_hw_wait_for_synth(struct ath5k_hw *ah,
struct ieee80211_channel *channel)
{
/*
* On 5211+ read activation -> rx delay
* and use it (100ns steps).
*/
if (ah->ah_version != AR5K_AR5210) {
u32 delay;
delay = ath5k_hw_reg_read(ah, AR5K_PHY_RX_DELAY) &
AR5K_PHY_RX_DELAY_M;
delay = (channel->hw_value & CHANNEL_CCK) ?
((delay << 2) / 22) : (delay / 10);
if (ah->ah_bwmode == AR5K_BWMODE_10MHZ)
delay = delay << 1;
if (ah->ah_bwmode == AR5K_BWMODE_5MHZ)
delay = delay << 2;
/* XXX: /2 on turbo ? Let's be safe
* for now */
udelay(100 + delay);
} else {
mdelay(1);
}
}
/**********************\
* RF Gain optimization *
......@@ -1253,6 +1281,7 @@ static int ath5k_hw_channel(struct ath5k_hw *ah,
case AR5K_RF5111:
ret = ath5k_hw_rf5111_channel(ah, channel);
break;
case AR5K_RF2317:
case AR5K_RF2425:
ret = ath5k_hw_rf2425_channel(ah, channel);
break;
......@@ -3237,6 +3266,13 @@ int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel,
/* Failed */
if (i >= 100)
return -EIO;
/* Set channel and wait for synth */
ret = ath5k_hw_channel(ah, channel);
if (ret)
return ret;
ath5k_hw_wait_for_synth(ah, channel);
}
/*
......@@ -3251,13 +3287,53 @@ int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel,
if (ret)
return ret;
/* Write OFDM timings on 5212*/
if (ah->ah_version == AR5K_AR5212 &&
channel->hw_value & CHANNEL_OFDM) {
ret = ath5k_hw_write_ofdm_timings(ah, channel);
if (ret)
return ret;
/* Spur info is available only from EEPROM versions
* greater than 5.3, but the EEPROM routines will use
* static values for older versions */
if (ah->ah_mac_srev >= AR5K_SREV_AR5424)
ath5k_hw_set_spur_mitigation_filter(ah,
channel);
}
/* If we used fast channel switching
* we are done, release RF bus and
* fire up NF calibration.
*
* Note: Only NF calibration due to
* channel change, not AGC calibration
* since AGC is still running !
*/
if (fast) {
/*
* Release RF Bus grant
*/
AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_RFBUS_REQ,
AR5K_PHY_RFBUS_REQ_REQUEST);
/*
* Start NF calibration
*/
AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL,
AR5K_PHY_AGCCTL_NF);
return ret;
}
/*
* For 5210 we do all initialization using
* initvals, so we don't have to modify
* any settings (5210 also only supports
* a/aturbo modes)
*/
if ((ah->ah_version != AR5K_AR5210) && !fast) {
if (ah->ah_version != AR5K_AR5210) {
/*
* Write initial RF gain settings
......@@ -3276,22 +3352,6 @@ int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel,
if (ret)
return ret;
/* Write OFDM timings on 5212*/
if (ah->ah_version == AR5K_AR5212 &&
channel->hw_value & CHANNEL_OFDM) {
ret = ath5k_hw_write_ofdm_timings(ah, channel);
if (ret)
return ret;
/* Spur info is available only from EEPROM versions
* greater than 5.3, but the EEPROM routines will use
* static values for older versions */
if (ah->ah_mac_srev >= AR5K_SREV_AR5424)
ath5k_hw_set_spur_mitigation_filter(ah,
channel);
}
/*Enable/disable 802.11b mode on 5111
(enable 2111 frequency converter + CCK)*/
if (ah->ah_radio == AR5K_RF5111) {
......@@ -3322,47 +3382,20 @@ int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel,
*/
ath5k_hw_reg_write(ah, AR5K_PHY_ACT_ENABLE, AR5K_PHY_ACT);
ath5k_hw_wait_for_synth(ah, channel);
/*
* On 5211+ read activation -> rx delay
* and use it.
* Perform ADC test to see if baseband is ready
* Set tx hold and check adc test register
*/
if (ah->ah_version != AR5K_AR5210) {
u32 delay;
delay = ath5k_hw_reg_read(ah, AR5K_PHY_RX_DELAY) &
AR5K_PHY_RX_DELAY_M;
delay = (channel->hw_value & CHANNEL_CCK) ?
((delay << 2) / 22) : (delay / 10);
if (ah->ah_bwmode == AR5K_BWMODE_10MHZ)
delay = delay << 1;
if (ah->ah_bwmode == AR5K_BWMODE_5MHZ)
delay = delay << 2;
/* XXX: /2 on turbo ? Let's be safe
* for now */
udelay(100 + delay);
} else {
mdelay(1);
}
if (fast)
/*
* Release RF Bus grant
*/
AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_RFBUS_REQ,
AR5K_PHY_RFBUS_REQ_REQUEST);
else {
/*
* Perform ADC test to see if baseband is ready
* Set tx hold and check adc test register
*/
phy_tst1 = ath5k_hw_reg_read(ah, AR5K_PHY_TST1);
ath5k_hw_reg_write(ah, AR5K_PHY_TST1_TXHOLD, AR5K_PHY_TST1);
for (i = 0; i <= 20; i++) {
if (!(ath5k_hw_reg_read(ah, AR5K_PHY_ADC_TEST) & 0x10))
break;
udelay(200);
}
ath5k_hw_reg_write(ah, phy_tst1, AR5K_PHY_TST1);
phy_tst1 = ath5k_hw_reg_read(ah, AR5K_PHY_TST1);
ath5k_hw_reg_write(ah, AR5K_PHY_TST1_TXHOLD, AR5K_PHY_TST1);
for (i = 0; i <= 20; i++) {
if (!(ath5k_hw_reg_read(ah, AR5K_PHY_ADC_TEST) & 0x10))
break;
udelay(200);
}
ath5k_hw_reg_write(ah, phy_tst1, AR5K_PHY_TST1);
/*
* Start automatic gain control calibration
......
......@@ -21,7 +21,6 @@
#include <linux/device.h>
#include <linux/leds.h>
#include <linux/completion.h>
#include <linux/pm_qos_params.h>
#include "debug.h"
#include "common.h"
......@@ -57,8 +56,6 @@ struct ath_node;
#define A_MAX(a, b) ((a) > (b) ? (a) : (b))
#define ATH9K_PM_QOS_DEFAULT_VALUE 55
#define TSF_TO_TU(_h,_l) \
((((u32)(_h)) << 22) | (((u32)(_l)) >> 10))
......@@ -633,8 +630,6 @@ struct ath_softc {
struct ath_descdma txsdma;
struct ath_ant_comb ant_comb;
struct pm_qos_request_list pm_qos_req;
};
struct ath_wiphy {
......@@ -666,7 +661,6 @@ static inline void ath_read_cachesize(struct ath_common *common, int *csz)
extern struct ieee80211_ops ath9k_ops;
extern int ath9k_modparam_nohwcrypt;
extern int led_blink;
extern int ath9k_pm_qos_value;
extern bool is_ath9k_unloaded;
irqreturn_t ath_isr(int irq, void *dev);
......
......@@ -41,10 +41,6 @@ static int ath9k_btcoex_enable;
module_param_named(btcoex_enable, ath9k_btcoex_enable, int, 0444);
MODULE_PARM_DESC(btcoex_enable, "Enable wifi-BT coexistence");
int ath9k_pm_qos_value = ATH9K_PM_QOS_DEFAULT_VALUE;
module_param_named(pmqos, ath9k_pm_qos_value, int, S_IRUSR | S_IRGRP | S_IROTH);
MODULE_PARM_DESC(pmqos, "User specified PM-QOS value");
bool is_ath9k_unloaded;
/* We use the hw_value as an index into our private channel structure */
......@@ -762,9 +758,6 @@ int ath9k_init_device(u16 devid, struct ath_softc *sc, u16 subsysid,
ath_init_leds(sc);
ath_start_rfkill_poll(sc);
pm_qos_add_request(&sc->pm_qos_req, PM_QOS_CPU_DMA_LATENCY,
PM_QOS_DEFAULT_VALUE);
return 0;
error_world:
......@@ -831,7 +824,6 @@ void ath9k_deinit_device(struct ath_softc *sc)
}
ieee80211_unregister_hw(hw);
pm_qos_remove_request(&sc->pm_qos_req);
ath_rx_cleanup(sc);
ath_tx_cleanup(sc);
ath9k_deinit_softc(sc);
......
......@@ -1173,12 +1173,6 @@ static int ath9k_start(struct ieee80211_hw *hw)
ath9k_btcoex_timer_resume(sc);
}
/* User has the option to provide pm-qos value as a module
* parameter rather than using the default value of
* 'ATH9K_PM_QOS_DEFAULT_VALUE'.
*/
pm_qos_update_request(&sc->pm_qos_req, ath9k_pm_qos_value);
if (ah->caps.pcie_lcr_extsync_en && common->bus_ops->extn_synch_en)
common->bus_ops->extn_synch_en(common);
......@@ -1345,8 +1339,6 @@ static void ath9k_stop(struct ieee80211_hw *hw)
sc->sc_flags |= SC_OP_INVALID;
pm_qos_update_request(&sc->pm_qos_req, PM_QOS_DEFAULT_VALUE);
mutex_unlock(&sc->mutex);
ath_dbg(common, ATH_DBG_CONFIG, "Driver halt\n");
......
......@@ -199,6 +199,7 @@ static void p54p_check_rx_ring(struct ieee80211_hw *dev, u32 *index,
while (i != idx) {
u16 len;
struct sk_buff *skb;
dma_addr_t dma_addr;
desc = &ring[i];
len = le16_to_cpu(desc->len);
skb = rx_buf[i];
......@@ -216,17 +217,20 @@ static void p54p_check_rx_ring(struct ieee80211_hw *dev, u32 *index,
len = priv->common.rx_mtu;
}
dma_addr = le32_to_cpu(desc->host_addr);
pci_dma_sync_single_for_cpu(priv->pdev, dma_addr,
priv->common.rx_mtu + 32, PCI_DMA_FROMDEVICE);
skb_put(skb, len);
if (p54_rx(dev, skb)) {
pci_unmap_single(priv->pdev,
le32_to_cpu(desc->host_addr),
priv->common.rx_mtu + 32,
PCI_DMA_FROMDEVICE);
pci_unmap_single(priv->pdev, dma_addr,
priv->common.rx_mtu + 32, PCI_DMA_FROMDEVICE);
rx_buf[i] = NULL;
desc->host_addr = 0;
desc->host_addr = cpu_to_le32(0);
} else {
skb_trim(skb, 0);
pci_dma_sync_single_for_device(priv->pdev, dma_addr,
priv->common.rx_mtu + 32, PCI_DMA_FROMDEVICE);
desc->len = cpu_to_le16(priv->common.rx_mtu + 32);
}
......
......@@ -652,6 +652,12 @@ static void rt2800pci_fill_rxdone(struct queue_entry *entry,
*/
rxdesc->flags |= RX_FLAG_IV_STRIPPED;
/*
* The hardware has already checked the Michael Mic and has
* stripped it from the frame. Signal this to mac80211.
*/
rxdesc->flags |= RX_FLAG_MMIC_STRIPPED;
if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS)
rxdesc->flags |= RX_FLAG_DECRYPTED;
else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC)
......@@ -1065,6 +1071,8 @@ static DEFINE_PCI_DEVICE_TABLE(rt2800pci_device_table) = {
{ PCI_DEVICE(0x1814, 0x3390), PCI_DEVICE_DATA(&rt2800pci_ops) },
#endif
#ifdef CONFIG_RT2800PCI_RT35XX
{ PCI_DEVICE(0x1432, 0x7711), PCI_DEVICE_DATA(&rt2800pci_ops) },
{ PCI_DEVICE(0x1432, 0x7722), PCI_DEVICE_DATA(&rt2800pci_ops) },
{ PCI_DEVICE(0x1814, 0x3060), PCI_DEVICE_DATA(&rt2800pci_ops) },
{ PCI_DEVICE(0x1814, 0x3062), PCI_DEVICE_DATA(&rt2800pci_ops) },
{ PCI_DEVICE(0x1814, 0x3562), PCI_DEVICE_DATA(&rt2800pci_ops) },
......
......@@ -486,6 +486,12 @@ static void rt2800usb_fill_rxdone(struct queue_entry *entry,
*/
rxdesc->flags |= RX_FLAG_IV_STRIPPED;
/*
* The hardware has already checked the Michael Mic and has
* stripped it from the frame. Signal this to mac80211.
*/
rxdesc->flags |= RX_FLAG_MMIC_STRIPPED;
if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS)
rxdesc->flags |= RX_FLAG_DECRYPTED;
else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC)
......
......@@ -727,7 +727,9 @@ static int rfcomm_tty_open(struct tty_struct *tty, struct file *filp)
break;
}
tty_unlock();
schedule();
tty_lock();
}
set_current_state(TASK_RUNNING);
remove_wait_queue(&dev->wait, &wait);
......
......@@ -1033,6 +1033,12 @@ void ieee80211_sta_rx_notify(struct ieee80211_sub_if_data *sdata,
if (is_multicast_ether_addr(hdr->addr1))
return;
/*
* In case we receive frames after disassociation.
*/
if (!sdata->u.mgd.associated)
return;
ieee80211_sta_reset_conn_monitor(sdata);
}
......
......@@ -802,11 +802,11 @@ int cfg80211_wext_siwfreq(struct net_device *dev,
return freq;
if (freq == 0)
return -EINVAL;
wdev_lock(wdev);
mutex_lock(&rdev->devlist_mtx);
wdev_lock(wdev);
err = cfg80211_set_freq(rdev, wdev, freq, NL80211_CHAN_NO_HT);
mutex_unlock(&rdev->devlist_mtx);
wdev_unlock(wdev);
mutex_unlock(&rdev->devlist_mtx);
return err;
default:
return -EOPNOTSUPP;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment