Commit d42b1c47 authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'devicetree-for-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull devicetree updates from Rob Herring:
 "Bindings:

   - Convert Qcom IOMMU, Amlogic timer, Freescale sec-v4.0, Toshiba
     TC358764 display bridge, Parade PS8622 display bridge, and Xilinx
     FPGA bindings to DT schema format

   - Add qdu1000 and sa8775p SoC support to Qcom PDC interrupt
     controller

   - Add MediaTek MT8365 UART and SYSIRQ bindings

   - Add Arm Cortex-A78C and X1C core compatibles

   - Add vendor prefix for Novatek

   - Remove bindings for stih415, sti416, stid127 platforms

   - Drop uneeded quotes in schema files. This is preparation for
     yamllint checking quoting for us.

   - Add missing (unevaluated|additional)Properties constraints on child
     node schemas

   - Clean-up schema comments formatting

   - Fix I2C and SPI node bus names in schema examples

   - Clean-up some display compatibles schema syntax

   - Fix incorrect references to lvds.yaml

   - Gather all cache controller bindings in a common directory

  DT core:

   - Convert unittest to new void .remove platform device hook

   - kerneldoc fixes for DT address of_pci_range_to_resource/
     of_address_to_resource functions"

* tag 'devicetree-for-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (46 commits)
  dt-bindings: rng: Drop unneeded quotes
  dt-bindings: arm/soc: mediatek: Drop unneeded quotes
  dt-bindings: soc: qcom: Drop unneeded quotes
  dt-bindings: i2c: samsung: Fix 'deprecated' value
  dt-bindings: display: Fix lvds.yaml references
  dt-bindings: display: simplify compatibles syntax
  dt-bindings: display: mediatek: simplify compatibles syntax
  dt-bindings: drm/bridge: ti-sn65dsi86: Fix the video-interfaces.yaml references
  dt-bindings: timer: Drop unneeded quotes
  dt-bindings: interrupt-controller: qcom,pdc: document qcom,qdu1000-pdc
  dt-bindings: interrupt-controller: qcom-pdc: add compatible for sa8775p
  dt-bindings: reset: remove stih415/stih416 reset
  dt-bindings: net: dwmac: sti: remove stih415/sti416/stid127
  dt-bindings: irqchip: sti: remove stih415/stih416 and stid127
  dt-bindings: iommu: Convert QCOM IOMMU to YAML
  dt-bindings: irqchip: ti,sci-inta: Add optional power-domains property
  dt-bindings: Add missing (unevaluated|additional)Properties on child node schemas
  of: address: Reshuffle to remove forward declarations
  of: address: Fix documented return value of of_pci_range_to_resource()
  of: address: Document return value of of_address_to_resource()
  ...
parents 6df969b7 66ae0535
...@@ -19,7 +19,7 @@ rules: ...@@ -19,7 +19,7 @@ rules:
colons: {max-spaces-before: 0, max-spaces-after: 1} colons: {max-spaces-before: 0, max-spaces-after: 1}
commas: {min-spaces-after: 1, max-spaces-after: 1} commas: {min-spaces-after: 1, max-spaces-after: 1}
comments: comments:
require-starting-space: false require-starting-space: true
min-spaces-from-content: 1 min-spaces-from-content: 1
comments-indentation: disable comments-indentation: disable
document-start: document-start:
......
...@@ -144,6 +144,7 @@ patternProperties: ...@@ -144,6 +144,7 @@ patternProperties:
it is stricter and always has two compatibles. it is stricter and always has two compatibles.
type: object type: object
$ref: '/schemas/simple-bus.yaml' $ref: '/schemas/simple-bus.yaml'
unevaluatedProperties: false
properties: properties:
compatible: compatible:
......
...@@ -30,6 +30,7 @@ properties: ...@@ -30,6 +30,7 @@ properties:
clocks: clocks:
type: object type: object
additionalProperties: false
properties: properties:
compatible: compatible:
...@@ -47,6 +48,7 @@ properties: ...@@ -47,6 +48,7 @@ properties:
reset: reset:
type: object type: object
additionalProperties: false
properties: properties:
compatible: compatible:
...@@ -63,6 +65,7 @@ properties: ...@@ -63,6 +65,7 @@ properties:
pwm: pwm:
type: object type: object
additionalProperties: false
properties: properties:
compatible: compatible:
...@@ -76,8 +79,6 @@ properties: ...@@ -76,8 +79,6 @@ properties:
- compatible - compatible
- "#pwm-cells" - "#pwm-cells"
additionalProperties: false
required: required:
- compatible - compatible
- mboxes - mboxes
......
...@@ -141,6 +141,7 @@ properties: ...@@ -141,6 +141,7 @@ properties:
- arm,cortex-a77 - arm,cortex-a77
- arm,cortex-a78 - arm,cortex-a78
- arm,cortex-a78ae - arm,cortex-a78ae
- arm,cortex-a78c
- arm,cortex-a510 - arm,cortex-a510
- arm,cortex-a710 - arm,cortex-a710
- arm,cortex-a715 - arm,cortex-a715
...@@ -153,6 +154,7 @@ properties: ...@@ -153,6 +154,7 @@ properties:
- arm,cortex-r5 - arm,cortex-r5
- arm,cortex-r7 - arm,cortex-r7
- arm,cortex-x1 - arm,cortex-x1
- arm,cortex-x1c
- arm,cortex-x2 - arm,cortex-x2
- arm,cortex-x3 - arm,cortex-x3
- arm,neoverse-e1 - arm,neoverse-e1
......
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2 %YAML 1.2
--- ---
$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,infracfg.yaml#" $id: http://devicetree.org/schemas/arm/mediatek/mediatek,infracfg.yaml#
$schema: "http://devicetree.org/meta-schemas/core.yaml#" $schema: http://devicetree.org/meta-schemas/core.yaml#
title: MediaTek Infrastructure System Configuration Controller title: MediaTek Infrastructure System Configuration Controller
......
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2 %YAML 1.2
--- ---
$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,mmsys.yaml#" $id: http://devicetree.org/schemas/arm/mediatek/mediatek,mmsys.yaml#
$schema: "http://devicetree.org/meta-schemas/core.yaml#" $schema: http://devicetree.org/meta-schemas/core.yaml#
title: MediaTek mmsys controller title: MediaTek mmsys controller
......
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2 %YAML 1.2
--- ---
$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,mt7622-pcie-mirror.yaml#" $id: http://devicetree.org/schemas/arm/mediatek/mediatek,mt7622-pcie-mirror.yaml#
$schema: "http://devicetree.org/meta-schemas/core.yaml#" $schema: http://devicetree.org/meta-schemas/core.yaml#
title: MediaTek PCIE Mirror Controller for MT7622 title: MediaTek PCIE Mirror Controller for MT7622
......
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2 %YAML 1.2
--- ---
$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,mt7622-wed.yaml#" $id: http://devicetree.org/schemas/arm/mediatek/mediatek,mt7622-wed.yaml#
$schema: "http://devicetree.org/meta-schemas/core.yaml#" $schema: http://devicetree.org/meta-schemas/core.yaml#
title: MediaTek Wireless Ethernet Dispatch Controller for MT7622 title: MediaTek Wireless Ethernet Dispatch Controller for MT7622
......
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2 %YAML 1.2
--- ---
$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,mt7986-wed-pcie.yaml#" $id: http://devicetree.org/schemas/arm/mediatek/mediatek,mt7986-wed-pcie.yaml#
$schema: "http://devicetree.org/meta-schemas/core.yaml#" $schema: http://devicetree.org/meta-schemas/core.yaml#
title: MediaTek PCIE WED Controller for MT7986 title: MediaTek PCIE WED Controller for MT7986
......
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2 %YAML 1.2
--- ---
$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,mt8186-clock.yaml#" $id: http://devicetree.org/schemas/arm/mediatek/mediatek,mt8186-clock.yaml#
$schema: "http://devicetree.org/meta-schemas/core.yaml#" $schema: http://devicetree.org/meta-schemas/core.yaml#
title: MediaTek Functional Clock Controller for MT8186 title: MediaTek Functional Clock Controller for MT8186
......
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2 %YAML 1.2
--- ---
$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,mt8186-sys-clock.yaml#" $id: http://devicetree.org/schemas/arm/mediatek/mediatek,mt8186-sys-clock.yaml#
$schema: "http://devicetree.org/meta-schemas/core.yaml#" $schema: http://devicetree.org/meta-schemas/core.yaml#
title: MediaTek System Clock Controller for MT8186 title: MediaTek System Clock Controller for MT8186
......
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2 %YAML 1.2
--- ---
$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,mt8192-clock.yaml#" $id: http://devicetree.org/schemas/arm/mediatek/mediatek,mt8192-clock.yaml#
$schema: "http://devicetree.org/meta-schemas/core.yaml#" $schema: http://devicetree.org/meta-schemas/core.yaml#
title: MediaTek Functional Clock Controller for MT8192 title: MediaTek Functional Clock Controller for MT8192
......
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2 %YAML 1.2
--- ---
$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,mt8192-sys-clock.yaml#" $id: http://devicetree.org/schemas/arm/mediatek/mediatek,mt8192-sys-clock.yaml#
$schema: "http://devicetree.org/meta-schemas/core.yaml#" $schema: http://devicetree.org/meta-schemas/core.yaml#
title: MediaTek System Clock Controller for MT8192 title: MediaTek System Clock Controller for MT8192
......
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2 %YAML 1.2
--- ---
$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,mt8195-clock.yaml#" $id: http://devicetree.org/schemas/arm/mediatek/mediatek,mt8195-clock.yaml#
$schema: "http://devicetree.org/meta-schemas/core.yaml#" $schema: http://devicetree.org/meta-schemas/core.yaml#
title: MediaTek Functional Clock Controller for MT8195 title: MediaTek Functional Clock Controller for MT8195
......
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2 %YAML 1.2
--- ---
$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,mt8195-sys-clock.yaml#" $id: http://devicetree.org/schemas/arm/mediatek/mediatek,mt8195-sys-clock.yaml#
$schema: "http://devicetree.org/meta-schemas/core.yaml#" $schema: http://devicetree.org/meta-schemas/core.yaml#
title: MediaTek System Clock Controller for MT8195 title: MediaTek System Clock Controller for MT8195
......
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2 %YAML 1.2
--- ---
$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,pericfg.yaml#" $id: http://devicetree.org/schemas/arm/mediatek/mediatek,pericfg.yaml#
$schema: "http://devicetree.org/meta-schemas/core.yaml#" $schema: http://devicetree.org/meta-schemas/core.yaml#
title: MediaTek Peripheral Configuration Controller title: MediaTek Peripheral Configuration Controller
......
...@@ -234,6 +234,7 @@ properties: ...@@ -234,6 +234,7 @@ properties:
patternProperties: patternProperties:
"^[a-z0-9]+$": "^[a-z0-9]+$":
type: object type: object
additionalProperties: false
properties: properties:
clocks: clocks:
...@@ -252,6 +253,9 @@ properties: ...@@ -252,6 +253,9 @@ properties:
for controlling a power-gate. for controlling a power-gate.
See ../reset/reset.txt for more details. See ../reset/reset.txt for more details.
power-domains:
maxItems: 1
'#power-domain-cells': '#power-domain-cells':
const: 0 const: 0
description: Must be 0. description: Must be 0.
......
...@@ -59,7 +59,7 @@ properties: ...@@ -59,7 +59,7 @@ properties:
const: sata-phy const: sata-phy
hba-cap: hba-cap:
$ref: '/schemas/types.yaml#/definitions/uint32' $ref: /schemas/types.yaml#/definitions/uint32
description: description:
Bitfield of the HBA generic platform capabilities like Staggered Bitfield of the HBA generic platform capabilities like Staggered
Spin-up or Mechanical Presence Switch support. It can be used to Spin-up or Mechanical Presence Switch support. It can be used to
...@@ -67,7 +67,7 @@ properties: ...@@ -67,7 +67,7 @@ properties:
in case if the system firmware hasn't done it. in case if the system firmware hasn't done it.
ports-implemented: ports-implemented:
$ref: '/schemas/types.yaml#/definitions/uint32' $ref: /schemas/types.yaml#/definitions/uint32
description: description:
Mask that indicates which ports the HBA supports. Useful if PI is not Mask that indicates which ports the HBA supports. Useful if PI is not
programmed by the BIOS, which is true for some embedded SoC's. programmed by the BIOS, which is true for some embedded SoC's.
...@@ -110,7 +110,7 @@ $defs: ...@@ -110,7 +110,7 @@ $defs:
description: Power regulator for SATA port target device description: Power regulator for SATA port target device
hba-port-cap: hba-port-cap:
$ref: '/schemas/types.yaml#/definitions/uint32' $ref: /schemas/types.yaml#/definitions/uint32
description: description:
Bitfield of the HBA port-specific platform capabilities like Hot Bitfield of the HBA port-specific platform capabilities like Hot
plugging, eSATA, FIS-based Switching, etc (see AHCI specification plugging, eSATA, FIS-based Switching, etc (see AHCI specification
......
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2 %YAML 1.2
--- ---
$id: "http://devicetree.org/schemas/ata/renesas,rcar-sata.yaml#" $id: http://devicetree.org/schemas/ata/renesas,rcar-sata.yaml#
$schema: "http://devicetree.org/meta-schemas/core.yaml#" $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Renesas R-Car Serial-ATA Interface title: Renesas R-Car Serial-ATA Interface
......
...@@ -72,7 +72,7 @@ examples: ...@@ -72,7 +72,7 @@ examples:
#include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/input/input.h> #include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h> #include <dt-bindings/leds/common.h>
i2c1 { i2c {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
......
...@@ -46,6 +46,7 @@ patternProperties: ...@@ -46,6 +46,7 @@ patternProperties:
# All other properties should be child nodes with unit-address and 'reg' # All other properties should be child nodes with unit-address and 'reg'
"^[a-zA-Z][a-zA-Z0-9,+\\-._]{0,63}@[0-9a-fA-F]+$": "^[a-zA-Z][a-zA-Z0-9,+\\-._]{0,63}@[0-9a-fA-F]+$":
type: object type: object
additionalProperties: true
properties: properties:
reg: reg:
maxItems: 1 maxItems: 1
......
...@@ -45,6 +45,7 @@ properties: ...@@ -45,6 +45,7 @@ properties:
patternProperties: patternProperties:
"^.*@[0-9a-fA-F]+$": "^.*@[0-9a-fA-F]+$":
type: object type: object
additionalProperties: true
properties: properties:
reg: reg:
maxItems: 1 maxItems: 1
......
...@@ -36,6 +36,7 @@ patternProperties: ...@@ -36,6 +36,7 @@ patternProperties:
# All other properties should be child nodes with unit-address and 'reg' # All other properties should be child nodes with unit-address and 'reg'
"@[0-9a-f]+$": "@[0-9a-f]+$":
type: object type: object
additionalProperties: true
properties: properties:
reg: reg:
maxItems: 1 maxItems: 1
......
...@@ -2,7 +2,7 @@ ...@@ -2,7 +2,7 @@
# Copyright (C) 2020 BAIKAL ELECTRONICS, JSC # Copyright (C) 2020 BAIKAL ELECTRONICS, JSC
%YAML 1.2 %YAML 1.2
--- ---
$id: http://devicetree.org/schemas/memory-controllers/baikal,bt1-l2-ctl.yaml# $id: http://devicetree.org/schemas/cache/baikal,bt1-l2-ctl.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Baikal-T1 L2-cache Control Block title: Baikal-T1 L2-cache Control Block
......
# SPDX-License-Identifier: GPL-2.0 # SPDX-License-Identifier: GPL-2.0
%YAML 1.2 %YAML 1.2
--- ---
$id: http://devicetree.org/schemas/arm/l2c2x0.yaml# $id: http://devicetree.org/schemas/cache/l2c2x0.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml#
title: ARM L2 Cache Controller title: ARM L2 Cache Controller
......
# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) # SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
%YAML 1.2 %YAML 1.2
--- ---
$id: http://devicetree.org/schemas/arm/msm/qcom,llcc.yaml# $id: http://devicetree.org/schemas/cache/qcom,llcc.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Last Level Cache Controller title: Last Level Cache Controller
......
...@@ -2,7 +2,7 @@ ...@@ -2,7 +2,7 @@
# Copyright (C) 2020 SiFive, Inc. # Copyright (C) 2020 SiFive, Inc.
%YAML 1.2 %YAML 1.2
--- ---
$id: http://devicetree.org/schemas/riscv/sifive,ccache0.yaml# $id: http://devicetree.org/schemas/cache/sifive,ccache0.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml#
title: SiFive Composable Cache Controller title: SiFive Composable Cache Controller
......
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2 %YAML 1.2
--- ---
$id: http://devicetree.org/schemas/arm/socionext/socionext,uniphier-system-cache.yaml# $id: http://devicetree.org/schemas/cache/socionext,uniphier-system-cache.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml#
title: UniPhier outer cache controller title: UniPhier outer cache controller
......
...@@ -41,7 +41,7 @@ additionalProperties: false ...@@ -41,7 +41,7 @@ additionalProperties: false
examples: examples:
- |+ - |+
spi0 { spi {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
......
...@@ -20,7 +20,7 @@ additionalProperties: false ...@@ -20,7 +20,7 @@ additionalProperties: false
examples: examples:
- | - |
spi0 { spi {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
......
...@@ -81,11 +81,11 @@ properties: ...@@ -81,11 +81,11 @@ properties:
maxItems: 1 maxItems: 1
lock-offset: lock-offset:
$ref: '/schemas/types.yaml#/definitions/uint32' $ref: /schemas/types.yaml#/definitions/uint32
description: Offset to the unlocking register for the oscillator description: Offset to the unlocking register for the oscillator
vco-offset: vco-offset:
$ref: '/schemas/types.yaml#/definitions/uint32' $ref: /schemas/types.yaml#/definitions/uint32
description: Offset to the VCO register for the oscillator description: Offset to the VCO register for the oscillator
deprecated: true deprecated: true
......
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2 %YAML 1.2
--- ---
$id: "http://devicetree.org/schemas/clock/mediatek,apmixedsys.yaml#" $id: http://devicetree.org/schemas/clock/mediatek,apmixedsys.yaml#
$schema: "http://devicetree.org/meta-schemas/core.yaml#" $schema: http://devicetree.org/meta-schemas/core.yaml#
title: MediaTek AP Mixedsys Controller title: MediaTek AP Mixedsys Controller
......
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2 %YAML 1.2
--- ---
$id: "http://devicetree.org/schemas/clock/mediatek,topckgen.yaml#" $id: http://devicetree.org/schemas/clock/mediatek,topckgen.yaml#
$schema: "http://devicetree.org/meta-schemas/core.yaml#" $schema: http://devicetree.org/meta-schemas/core.yaml#
title: MediaTek Top Clock Generator Controller title: MediaTek Top Clock Generator Controller
......
...@@ -45,14 +45,14 @@ required: ...@@ -45,14 +45,14 @@ required:
additionalProperties: false additionalProperties: false
examples: examples:
#Example 1 - A53 PLL found on MSM8916 devices # Example 1 - A53 PLL found on MSM8916 devices
- | - |
a53pll: clock@b016000 { a53pll: clock@b016000 {
compatible = "qcom,msm8916-a53pll"; compatible = "qcom,msm8916-a53pll";
reg = <0xb016000 0x40>; reg = <0xb016000 0x40>;
#clock-cells = <0>; #clock-cells = <0>;
}; };
#Example 2 - A53 PLL found on IPQ6018 devices # Example 2 - A53 PLL found on IPQ6018 devices
- | - |
a53pll_ipq: clock-controller@b116000 { a53pll_ipq: clock-controller@b116000 {
compatible = "qcom,ipq6018-a53pll"; compatible = "qcom,ipq6018-a53pll";
......
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2 %YAML 1.2
--- ---
$id: "http://devicetree.org/schemas/clock/renesas,cpg-mssr.yaml#" $id: http://devicetree.org/schemas/clock/renesas,cpg-mssr.yaml#
$schema: "http://devicetree.org/meta-schemas/core.yaml#" $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Renesas Clock Pulse Generator / Module Standby and Software Reset title: Renesas Clock Pulse Generator / Module Standby and Software Reset
......
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2 %YAML 1.2
--- ---
$id: "http://devicetree.org/schemas/clock/renesas,rcar-usb2-clock-sel.yaml#" $id: http://devicetree.org/schemas/clock/renesas,rcar-usb2-clock-sel.yaml#
$schema: "http://devicetree.org/meta-schemas/core.yaml#" $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Renesas R-Car USB 2.0 clock selector title: Renesas R-Car USB 2.0 clock selector
......
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2 %YAML 1.2
--- ---
$id: "http://devicetree.org/schemas/clock/renesas,rzg2l-cpg.yaml#" $id: http://devicetree.org/schemas/clock/renesas,rzg2l-cpg.yaml#
$schema: "http://devicetree.org/meta-schemas/core.yaml#" $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Renesas RZ/{G2L,V2L,V2M} Clock Pulse Generator / Module Standby Mode title: Renesas RZ/{G2L,V2L,V2M} Clock Pulse Generator / Module Standby Mode
......
...@@ -202,7 +202,7 @@ allOf: ...@@ -202,7 +202,7 @@ allOf:
- description: External RTC clock (32768 Hz) - description: External RTC clock (32768 Hz)
- description: CMU_HSI bus clock (from CMU_TOP) - description: CMU_HSI bus clock (from CMU_TOP)
- description: SD card clock (from CMU_TOP) - description: SD card clock (from CMU_TOP)
- description: "USB 2.0 DRD clock (from CMU_TOP)" - description: USB 2.0 DRD clock (from CMU_TOP)
clock-names: clock-names:
items: items:
......
...@@ -2,8 +2,8 @@ ...@@ -2,8 +2,8 @@
# Copyright 2019 Unisoc Inc. # Copyright 2019 Unisoc Inc.
%YAML 1.2 %YAML 1.2
--- ---
$id: "http://devicetree.org/schemas/clock/sprd,sc9863a-clk.yaml#" $id: http://devicetree.org/schemas/clock/sprd,sc9863a-clk.yaml#
$schema: "http://devicetree.org/meta-schemas/core.yaml#" $schema: http://devicetree.org/meta-schemas/core.yaml#
title: SC9863A Clock Control Unit title: SC9863A Clock Control Unit
......
...@@ -2,8 +2,8 @@ ...@@ -2,8 +2,8 @@
# Copyright 2022 Unisoc Inc. # Copyright 2022 Unisoc Inc.
%YAML 1.2 %YAML 1.2
--- ---
$id: "http://devicetree.org/schemas/clock/sprd,ums512-clk.yaml#" $id: http://devicetree.org/schemas/clock/sprd,ums512-clk.yaml#
$schema: "http://devicetree.org/meta-schemas/core.yaml#" $schema: http://devicetree.org/meta-schemas/core.yaml#
title: UMS512 Soc clock controller title: UMS512 Soc clock controller
......
...@@ -160,7 +160,7 @@ examples: ...@@ -160,7 +160,7 @@ examples:
}; };
}; };
spi0 { spi {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
......
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2 %YAML 1.2
--- ---
$id: "http://devicetree.org/schemas/clock/xlnx,clocking-wizard.yaml#" $id: http://devicetree.org/schemas/clock/xlnx,clocking-wizard.yaml#
$schema: "http://devicetree.org/meta-schemas/core.yaml#" $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Xilinx clocking wizard title: Xilinx clocking wizard
......
# SPDX-License-Identifier: GPL-2.0
# Copyright (C) 2008-2011 Freescale Semiconductor Inc.
%YAML 1.2
---
$id: http://devicetree.org/schemas/crypto/fsl,sec-v4.0-mon.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Freescale Secure Non-Volatile Storage (SNVS)
maintainers:
- '"Horia Geantă" <horia.geanta@nxp.com>'
- Pankaj Gupta <pankaj.gupta@nxp.com>
- Gaurav Jain <gaurav.jain@nxp.com>
description:
Node defines address range and the associated interrupt for the SNVS function.
This function monitors security state information & reports security
violations. This also included rtc, system power off and ON/OFF key.
properties:
compatible:
oneOf:
- items:
- const: fsl,sec-v4.0-mon
- const: syscon
- const: simple-mfd
- items:
- const: fsl,sec-v5.0-mon
- const: fsl,sec-v4.0-mon
- items:
- enum:
- fsl,sec-v5.3-mon
- fsl,sec-v5.4-mon
- const: fsl,sec-v5.0-mon
- const: fsl,sec-v4.0-mon
reg:
maxItems: 1
interrupts:
maxItems: 2
snvs-rtc-lp:
type: object
additionalProperties: false
description:
Secure Non-Volatile Storage (SNVS) Low Power (LP) RTC Node
properties:
compatible:
const: fsl,sec-v4.0-mon-rtc-lp
clocks:
maxItems: 1
clock-names:
const: snvs-rtc
interrupts:
# VFxxx has only one. What is the 2nd one?
minItems: 1
maxItems: 2
regmap:
description: Parent node containing registers
$ref: /schemas/types.yaml#/definitions/phandle
offset:
description: LP register offset
$ref: /schemas/types.yaml#/definitions/uint32
default: 0x34
required:
- compatible
- interrupts
- regmap
snvs-powerkey:
type: object
additionalProperties: false
description:
The snvs-pwrkey is designed to enable POWER key function which controlled
by SNVS ONOFF, the driver can report the status of POWER key and wakeup
system if pressed after system suspend.
properties:
compatible:
const: fsl,sec-v4.0-pwrkey
clocks:
maxItems: 1
clock-names:
const: snvs-pwrkey
interrupts:
maxItems: 1
regmap:
description: Parent node containing registers
$ref: /schemas/types.yaml#/definitions/phandle
wakeup-source: true
linux,keycode:
default: 116
required:
- compatible
- interrupts
- regmap
snvs-lpgpr:
$ref: /schemas/nvmem/snvs-lpgpr.yaml#
snvs-poweroff:
description:
The SNVS could drive signal to PMIC to turn off system power by setting
SNVS_LP LPCR register.
$ref: /schemas/power/reset/syscon-poweroff.yaml#
required:
- compatible
- reg
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/imx7d-clock.h>
sec_mon: sec-mon@314000 {
compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
reg = <0x314000 0x1000>;
snvs-rtc-lp {
compatible = "fsl,sec-v4.0-mon-rtc-lp";
regmap = <&sec_mon>;
offset = <0x34>;
clocks = <&clks IMX7D_SNVS_CLK>;
clock-names = "snvs-rtc";
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
};
snvs-powerkey {
compatible = "fsl,sec-v4.0-pwrkey";
regmap = <&sec_mon>;
clocks = <&clks IMX7D_SNVS_CLK>;
clock-names = "snvs-pwrkey";
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
linux,keycode = <116>; /* KEY_POWER */
wakeup-source;
};
};
# SPDX-License-Identifier: GPL-2.0
# Copyright (C) 2008-2011 Freescale Semiconductor Inc.
%YAML 1.2
---
$id: http://devicetree.org/schemas/crypto/fsl,sec-v4.0.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Freescale SEC 4
maintainers:
- '"Horia Geantă" <horia.geanta@nxp.com>'
- Pankaj Gupta <pankaj.gupta@nxp.com>
- Gaurav Jain <gaurav.jain@nxp.com>
description: |
NOTE: the SEC 4 is also known as Freescale's Cryptographic Accelerator
Accelerator and Assurance Module (CAAM).
SEC 4 h/w can process requests from 2 types of sources.
1. DPAA Queue Interface (HW interface between Queue Manager & SEC 4).
2. Job Rings (HW interface between cores & SEC 4 registers).
High Speed Data Path Configuration:
HW interface between QM & SEC 4 and also BM & SEC 4, on DPAA-enabled parts
such as the P4080. The number of simultaneous dequeues the QI can make is
equal to the number of Descriptor Controller (DECO) engines in a particular
SEC version. E.g., the SEC 4.0 in the P4080 has 5 DECOs and can thus
dequeue from 5 subportals simultaneously.
Job Ring Data Path Configuration:
Each JR is located on a separate 4k page, they may (or may not) be made visible
in the memory partition devoted to a particular core. The P4080 has 4 JRs, so
up to 4 JRs can be configured; and all 4 JRs process requests in parallel.
properties:
compatible:
oneOf:
- items:
- const: fsl,sec-v5.4
- const: fsl,sec-v5.0
- const: fsl,sec-v4.0
- items:
- enum:
- fsl,imx6ul-caam
- fsl,sec-v5.0
- const: fsl,sec-v4.0
- const: fsl,sec-v4.0
reg:
maxItems: 1
ranges:
maxItems: 1
'#address-cells':
enum: [1, 2]
'#size-cells':
enum: [1, 2]
clocks:
minItems: 1
maxItems: 4
clock-names:
minItems: 1
maxItems: 4
items:
enum: [mem, aclk, ipg, emi_slow]
dma-coherent: true
interrupts:
maxItems: 1
fsl,sec-era:
description: Defines the 'ERA' of the SEC device.
$ref: /schemas/types.yaml#/definitions/uint32
patternProperties:
'^jr@[0-9a-f]+$':
type: object
additionalProperties: false
description:
Job Ring (JR) Node. Defines data processing interface to SEC 4 across the
peripheral bus for purposes of processing cryptographic descriptors. The
specified address range can be made visible to one (or more) cores. The
interrupt defined for this node is controlled within the address range of
this node.
properties:
compatible:
oneOf:
- items:
- const: fsl,sec-v5.4-job-ring
- const: fsl,sec-v5.0-job-ring
- const: fsl,sec-v4.0-job-ring
- items:
- const: fsl,sec-v5.0-job-ring
- const: fsl,sec-v4.0-job-ring
- const: fsl,sec-v4.0-job-ring
reg:
maxItems: 1
interrupts:
maxItems: 1
fsl,liodn:
description:
Specifies the LIODN to be used in conjunction with the ppid-to-liodn
table that specifies the PPID to LIODN mapping. Needed if the PAMU is
used. Value is a 12 bit value where value is a LIODN ID for this JR.
This property is normally set by boot firmware.
$ref: /schemas/types.yaml#/definitions/uint32
maximum: 0xfff
'^rtic@[0-9a-f]+$':
type: object
additionalProperties: false
description:
Run Time Integrity Check (RTIC) Node. Defines a register space that
contains up to 5 sets of addresses and their lengths (sizes) that will be
checked at run time. After an initial hash result is calculated, these
addresses are checked by HW to monitor any change. If any memory is
modified, a Security Violation is triggered (see SNVS definition).
properties:
compatible:
oneOf:
- items:
- const: fsl,sec-v5.4-rtic
- const: fsl,sec-v5.0-rtic
- const: fsl,sec-v4.0-rtic
- const: fsl,sec-v4.0-rtic
reg:
maxItems: 1
ranges:
maxItems: 1
interrupts:
maxItems: 1
'#address-cells':
const: 1
'#size-cells':
const: 1
patternProperties:
'^rtic-[a-z]@[0-9a-f]+$':
type: object
additionalProperties: false
description:
Run Time Integrity Check (RTIC) Memory Node defines individual RTIC
memory regions that are used to perform run-time integrity check of
memory areas that should not modified. The node defines a register
that contains the memory address & length (combined) and a second
register that contains the hash result in big endian format.
properties:
compatible:
oneOf:
- items:
- const: fsl,sec-v5.4-rtic-memory
- const: fsl,sec-v5.0-rtic-memory
- const: fsl,sec-v4.0-rtic-memory
- const: fsl,sec-v4.0-rtic-memory
reg:
items:
- description: RTIC memory address
- description: RTIC hash result
fsl,liodn:
description:
Specifies the LIODN to be used in conjunction with the
ppid-to-liodn table that specifies the PPID to LIODN mapping.
Needed if the PAMU is used. Value is a 12 bit value where value
is a LIODN ID for this JR. This property is normally set by boot
firmware.
$ref: /schemas/types.yaml#/definitions/uint32
maximum: 0xfff
fsl,rtic-region:
description:
Specifies the HW address (36 bit address) for this region
followed by the length of the HW partition to be checked;
the address is represented as a 64 bit quantity followed
by a 32 bit length.
$ref: /schemas/types.yaml#/definitions/uint32-array
required:
- compatible
- reg
- ranges
additionalProperties: false
examples:
- |
crypto@300000 {
compatible = "fsl,sec-v4.0";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x300000 0x10000>;
ranges = <0 0x300000 0x10000>;
interrupts = <92 2>;
jr@1000 {
compatible = "fsl,sec-v4.0-job-ring";
reg = <0x1000 0x1000>;
interrupts = <88 2>;
};
jr@2000 {
compatible = "fsl,sec-v4.0-job-ring";
reg = <0x2000 0x1000>;
interrupts = <89 2>;
};
jr@3000 {
compatible = "fsl,sec-v4.0-job-ring";
reg = <0x3000 0x1000>;
interrupts = <90 2>;
};
jr@4000 {
compatible = "fsl,sec-v4.0-job-ring";
reg = <0x4000 0x1000>;
interrupts = <91 2>;
};
rtic@6000 {
compatible = "fsl,sec-v4.0-rtic";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x6000 0x100>;
ranges = <0x0 0x6100 0xe00>;
rtic-a@0 {
compatible = "fsl,sec-v4.0-rtic-memory";
reg = <0x00 0x20>, <0x100 0x80>;
};
rtic-b@20 {
compatible = "fsl,sec-v4.0-rtic-memory";
reg = <0x20 0x20>, <0x200 0x80>;
};
rtic-c@40 {
compatible = "fsl,sec-v4.0-rtic-memory";
reg = <0x40 0x20>, <0x300 0x80>;
};
rtic-d@60 {
compatible = "fsl,sec-v4.0-rtic-memory";
reg = <0x60 0x20>, <0x500 0x80>;
};
};
};
...
This diff is collapsed.
...@@ -26,8 +26,8 @@ properties: ...@@ -26,8 +26,8 @@ properties:
dmas: dmas:
items: items:
- description: TX DMA Channel - description: TX DMA Channel
- description: RX DMA Channel #1 - description: 'RX DMA Channel #1'
- description: RX DMA Channel #2 - description: 'RX DMA Channel #2'
dma-names: dma-names:
items: items:
......
...@@ -16,8 +16,7 @@ description: | ...@@ -16,8 +16,7 @@ description: |
properties: properties:
compatible: compatible:
items: const: analogix,anx7625
- const: analogix,anx7625
reg: reg:
maxItems: 1 maxItems: 1
...@@ -134,7 +133,7 @@ examples: ...@@ -134,7 +133,7 @@ examples:
- | - |
#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/gpio/gpio.h>
i2c0 { i2c {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
......
...@@ -61,7 +61,7 @@ additionalProperties: false ...@@ -61,7 +61,7 @@ additionalProperties: false
examples: examples:
- | - |
i2c0 { i2c {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
......
...@@ -67,7 +67,7 @@ examples: ...@@ -67,7 +67,7 @@ examples:
- | - |
#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/gpio/gpio.h>
i2c4 { i2c {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
......
...@@ -71,7 +71,7 @@ examples: ...@@ -71,7 +71,7 @@ examples:
- | - |
#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/gpio/gpio.h>
i2c1 { i2c {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
......
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/bridge/parade,ps8622.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Parade PS8622/PS8625 DisplayPort to LVDS Converter
maintainers:
- Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
properties:
compatible:
enum:
- parade,ps8622
- parade,ps8625
reg:
maxItems: 1
lane-count:
$ref: /schemas/types.yaml#/definitions/uint32
enum: [1, 2]
description: Number of DP lanes to use.
use-external-pwm:
type: boolean
description: Backlight will be controlled by an external PWM.
reset-gpios:
maxItems: 1
description: GPIO connected to RST_ pin.
sleep-gpios:
maxItems: 1
description: GPIO connected to PD_ pin.
vdd12-supply: true
ports:
$ref: /schemas/graph.yaml#/properties/ports
properties:
port@0:
$ref: /schemas/graph.yaml#/properties/port
description: Video port for LVDS output.
port@1:
$ref: /schemas/graph.yaml#/properties/port
description: Video port for DisplayPort input.
required:
- port@0
- port@1
required:
- compatible
- reg
- reset-gpios
- sleep-gpios
- ports
allOf:
- if:
properties:
compatible:
const: parade,ps8622
then:
properties:
lane-count:
const: 1
else:
properties:
lane-count:
const: 2
additionalProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
lvds-bridge@48 {
compatible = "parade,ps8625";
reg = <0x48>;
sleep-gpios = <&gpx3 5 GPIO_ACTIVE_HIGH>;
reset-gpios = <&gpy7 7 GPIO_ACTIVE_HIGH>;
lane-count = <2>;
use-external-pwm;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
bridge_out: endpoint {
remote-endpoint = <&panel_in>;
};
};
port@1 {
reg = <1>;
bridge_in: endpoint {
remote-endpoint = <&dp_out>;
};
};
};
};
};
ps8622-bridge bindings
Required properties:
- compatible: "parade,ps8622" or "parade,ps8625"
- reg: first i2c address of the bridge
- sleep-gpios: OF device-tree gpio specification for PD_ pin.
- reset-gpios: OF device-tree gpio specification for RST_ pin.
Optional properties:
- lane-count: number of DP lanes to use
- use-external-pwm: backlight will be controlled by an external PWM
- video interfaces: Device node can contain video interface port
nodes for panel according to [1].
[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
Example:
lvds-bridge@48 {
compatible = "parade,ps8622";
reg = <0x48>;
sleep-gpios = <&gpc3 6 1 0 0>;
reset-gpios = <&gpc3 1 1 0 0>;
lane-count = <1>;
ports {
port@0 {
bridge_out: endpoint {
remote-endpoint = <&panel_in>;
};
};
};
};
...@@ -73,7 +73,7 @@ additionalProperties: false ...@@ -73,7 +73,7 @@ additionalProperties: false
examples: examples:
- | - |
#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/gpio/gpio.h>
i2c0 { i2c {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
......
...@@ -71,7 +71,7 @@ examples: ...@@ -71,7 +71,7 @@ examples:
#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/irq.h>
i2c1 { i2c {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
......
...@@ -83,7 +83,7 @@ examples: ...@@ -83,7 +83,7 @@ examples:
- | - |
#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/gpio/gpio.h>
i2c1 { i2c {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
......
...@@ -90,7 +90,7 @@ properties: ...@@ -90,7 +90,7 @@ properties:
properties: properties:
endpoint: endpoint:
$ref: /schemas/graph.yaml#/$defs/endpoint-base $ref: /schemas/media/video-interfaces.yaml#
unevaluatedProperties: false unevaluatedProperties: false
properties: properties:
...@@ -106,7 +106,6 @@ properties: ...@@ -106,7 +106,6 @@ properties:
description: description:
If you have 1 logical lane the bridge supports routing If you have 1 logical lane the bridge supports routing
to either port 0 or port 1. Port 0 is suggested. to either port 0 or port 1. Port 0 is suggested.
See ../../media/video-interface.txt for details.
- minItems: 2 - minItems: 2
maxItems: 2 maxItems: 2
...@@ -118,7 +117,6 @@ properties: ...@@ -118,7 +117,6 @@ properties:
description: description:
If you have 2 logical lanes the bridge supports If you have 2 logical lanes the bridge supports
reordering but only on physical ports 0 and 1. reordering but only on physical ports 0 and 1.
See ../../media/video-interface.txt for details.
- minItems: 4 - minItems: 4
maxItems: 4 maxItems: 4
...@@ -132,7 +130,6 @@ properties: ...@@ -132,7 +130,6 @@ properties:
description: description:
If you have 4 logical lanes the bridge supports If you have 4 logical lanes the bridge supports
reordering in any way. reordering in any way.
See ../../media/video-interface.txt for details.
lane-polarities: lane-polarities:
minItems: 1 minItems: 1
...@@ -141,7 +138,6 @@ properties: ...@@ -141,7 +138,6 @@ properties:
enum: enum:
- 0 - 0
- 1 - 1
description: See ../../media/video-interface.txt
dependencies: dependencies:
lane-polarities: [data-lanes] lane-polarities: [data-lanes]
......
...@@ -51,7 +51,7 @@ additionalProperties: false ...@@ -51,7 +51,7 @@ additionalProperties: false
examples: examples:
- | - |
i2c1 { i2c {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
......
TC358764 MIPI-DSI to LVDS panel bridge
Required properties:
- compatible: "toshiba,tc358764"
- reg: the virtual channel number of a DSI peripheral
- vddc-supply: core voltage supply, 1.2V
- vddio-supply: I/O voltage supply, 1.8V or 3.3V
- vddlvds-supply: LVDS1/2 voltage supply, 3.3V
- reset-gpios: a GPIO spec for the reset pin
The device node can contain following 'port' child nodes,
according to the OF graph bindings defined in [1]:
0: DSI Input, not required, if the bridge is DSI controlled
1: LVDS Output, mandatory
[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
Example:
bridge@0 {
reg = <0>;
compatible = "toshiba,tc358764";
vddc-supply = <&vcc_1v2_reg>;
vddio-supply = <&vcc_1v8_reg>;
vddlvds-supply = <&vcc_3v3_reg>;
reset-gpios = <&gpd1 6 GPIO_ACTIVE_LOW>;
#address-cells = <1>;
#size-cells = <0>;
port@1 {
reg = <1>;
lvds_ep: endpoint {
remote-endpoint = <&panel_ep>;
};
};
};
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/bridge/toshiba,tc358764.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Toshiba TC358764 MIPI-DSI to LVDS bridge
maintainers:
- Andrzej Hajda <andrzej.hajda@intel.com>
properties:
compatible:
const: toshiba,tc358764
reg:
description: Virtual channel number of a DSI peripheral
maxItems: 1
reset-gpios:
maxItems: 1
vddc-supply:
description: Core voltage supply, 1.2V
vddio-supply:
description: I/O voltage supply, 1.8V or 3.3V
vddlvds-supply:
description: LVDS1/2 voltage supply, 3.3V
ports:
$ref: /schemas/graph.yaml#/properties/ports
properties:
port@0:
$ref: /schemas/graph.yaml#/properties/port
description:
Video port for MIPI DSI input, if the bridge DSI controlled
port@1:
$ref: /schemas/graph.yaml#/properties/port
description:
Video port for LVDS output (panel or connector).
required:
- port@1
required:
- compatible
- reg
- reset-gpios
- vddc-supply
- vddio-supply
- vddlvds-supply
- ports
additionalProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
bridge@0 {
compatible = "toshiba,tc358764";
reg = <0>;
reset-gpios = <&gpd1 6 GPIO_ACTIVE_LOW>;
vddc-supply = <&vcc_1v2_reg>;
vddio-supply = <&vcc_1v8_reg>;
vddlvds-supply = <&vcc_3v3_reg>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@1 {
reg = <1>;
lvds_ep: endpoint {
remote-endpoint = <&panel_ep>;
};
};
};
};
};
...@@ -87,7 +87,7 @@ examples: ...@@ -87,7 +87,7 @@ examples:
- | - |
#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/gpio/gpio.h>
i2c1 { i2c {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
......
...@@ -21,10 +21,9 @@ description: | ...@@ -21,10 +21,9 @@ description: |
properties: properties:
compatible: compatible:
oneOf: oneOf:
- items: - enum:
- const: mediatek,mt8183-disp-ccorr - mediatek,mt8183-disp-ccorr
- items: - mediatek,mt8192-disp-ccorr
- const: mediatek,mt8192-disp-ccorr
- items: - items:
- enum: - enum:
- mediatek,mt8186-disp-ccorr - mediatek,mt8186-disp-ccorr
......
...@@ -22,12 +22,10 @@ description: | ...@@ -22,12 +22,10 @@ description: |
properties: properties:
compatible: compatible:
oneOf: oneOf:
- items: - enum:
- const: mediatek,mt2701-disp-color - mediatek,mt2701-disp-color
- items: - mediatek,mt8167-disp-color
- const: mediatek,mt8167-disp-color - mediatek,mt8173-disp-color
- items:
- const: mediatek,mt8173-disp-color
- items: - items:
- enum: - enum:
- mediatek,mt7623-disp-color - mediatek,mt7623-disp-color
......
...@@ -22,8 +22,8 @@ description: | ...@@ -22,8 +22,8 @@ description: |
properties: properties:
compatible: compatible:
oneOf: oneOf:
- items: - enum:
- const: mediatek,mt8183-disp-dither - mediatek,mt8183-disp-dither
- items: - items:
- enum: - enum:
- mediatek,mt8186-disp-dither - mediatek,mt8186-disp-dither
......
...@@ -20,8 +20,8 @@ description: | ...@@ -20,8 +20,8 @@ description: |
properties: properties:
compatible: compatible:
oneOf: oneOf:
- items: - enum:
- const: mediatek,mt8195-disp-dsc - mediatek,mt8195-disp-dsc
reg: reg:
maxItems: 1 maxItems: 1
......
...@@ -21,10 +21,9 @@ description: | ...@@ -21,10 +21,9 @@ description: |
properties: properties:
compatible: compatible:
oneOf: oneOf:
- items: - enum:
- const: mediatek,mt8173-disp-gamma - mediatek,mt8173-disp-gamma
- items: - mediatek,mt8183-disp-gamma
- const: mediatek,mt8183-disp-gamma
- items: - items:
- enum: - enum:
- mediatek,mt8186-disp-gamma - mediatek,mt8186-disp-gamma
......
...@@ -21,10 +21,9 @@ description: | ...@@ -21,10 +21,9 @@ description: |
properties: properties:
compatible: compatible:
oneOf: oneOf:
- items: - enum:
- const: mediatek,mt8173-disp-merge - mediatek,mt8173-disp-merge
- items: - mediatek,mt8195-disp-merge
- const: mediatek,mt8195-disp-merge
reg: reg:
maxItems: 1 maxItems: 1
......
...@@ -21,10 +21,9 @@ description: | ...@@ -21,10 +21,9 @@ description: |
properties: properties:
compatible: compatible:
oneOf: oneOf:
- items: - enum:
- const: mediatek,mt2712-disp-od - mediatek,mt2712-disp-od
- items: - mediatek,mt8173-disp-od
- const: mediatek,mt8173-disp-od
reg: reg:
maxItems: 1 maxItems: 1
......
...@@ -21,10 +21,9 @@ description: | ...@@ -21,10 +21,9 @@ description: |
properties: properties:
compatible: compatible:
oneOf: oneOf:
- items: - enum:
- const: mediatek,mt8183-disp-ovl-2l - mediatek,mt8183-disp-ovl-2l
- items: - mediatek,mt8192-disp-ovl-2l
- const: mediatek,mt8192-disp-ovl-2l
- items: - items:
- enum: - enum:
- mediatek,mt8186-disp-ovl-2l - mediatek,mt8186-disp-ovl-2l
......
...@@ -21,14 +21,11 @@ description: | ...@@ -21,14 +21,11 @@ description: |
properties: properties:
compatible: compatible:
oneOf: oneOf:
- items: - enum:
- const: mediatek,mt2701-disp-ovl - mediatek,mt2701-disp-ovl
- items: - mediatek,mt8173-disp-ovl
- const: mediatek,mt8173-disp-ovl - mediatek,mt8183-disp-ovl
- items: - mediatek,mt8192-disp-ovl
- const: mediatek,mt8183-disp-ovl
- items:
- const: mediatek,mt8192-disp-ovl
- items: - items:
- enum: - enum:
- mediatek,mt7623-disp-ovl - mediatek,mt7623-disp-ovl
......
...@@ -21,8 +21,8 @@ description: | ...@@ -21,8 +21,8 @@ description: |
properties: properties:
compatible: compatible:
oneOf: oneOf:
- items: - enum:
- const: mediatek,mt8192-disp-postmask - mediatek,mt8192-disp-postmask
- items: - items:
- enum: - enum:
- mediatek,mt8186-disp-postmask - mediatek,mt8186-disp-postmask
......
...@@ -23,14 +23,11 @@ description: | ...@@ -23,14 +23,11 @@ description: |
properties: properties:
compatible: compatible:
oneOf: oneOf:
- items: - enum:
- const: mediatek,mt2701-disp-rdma - mediatek,mt2701-disp-rdma
- items: - mediatek,mt8173-disp-rdma
- const: mediatek,mt8173-disp-rdma - mediatek,mt8183-disp-rdma
- items: - mediatek,mt8195-disp-rdma
- const: mediatek,mt8183-disp-rdma
- items:
- const: mediatek,mt8195-disp-rdma
- items: - items:
- enum: - enum:
- mediatek,mt8188-disp-rdma - mediatek,mt8188-disp-rdma
......
...@@ -21,8 +21,8 @@ description: | ...@@ -21,8 +21,8 @@ description: |
properties: properties:
compatible: compatible:
oneOf: oneOf:
- items: - enum:
- const: mediatek,mt8173-disp-split - mediatek,mt8173-disp-split
reg: reg:
maxItems: 1 maxItems: 1
......
...@@ -22,8 +22,8 @@ description: | ...@@ -22,8 +22,8 @@ description: |
properties: properties:
compatible: compatible:
oneOf: oneOf:
- items: - enum:
- const: mediatek,mt8173-disp-ufoe - mediatek,mt8173-disp-ufoe
reg: reg:
maxItems: 1 maxItems: 1
......
...@@ -21,8 +21,8 @@ description: | ...@@ -21,8 +21,8 @@ description: |
properties: properties:
compatible: compatible:
oneOf: oneOf:
- items: - enum:
- const: mediatek,mt8173-disp-wdma - mediatek,mt8173-disp-wdma
reg: reg:
maxItems: 1 maxItems: 1
......
...@@ -61,7 +61,7 @@ properties: ...@@ -61,7 +61,7 @@ properties:
- const: lut - const: lut
- const: tbu - const: tbu
- const: tbu_rt - const: tbu_rt
#MSM8996 has additional iommu clock # MSM8996 has additional iommu clock
- items: - items:
- const: iface - const: iface
- const: bus - const: bus
......
...@@ -101,6 +101,7 @@ required: ...@@ -101,6 +101,7 @@ required:
patternProperties: patternProperties:
"^display-controller@[1-9a-f][0-9a-f]*$": "^display-controller@[1-9a-f][0-9a-f]*$":
type: object type: object
additionalProperties: true
properties: properties:
compatible: compatible:
contains: contains:
...@@ -108,6 +109,7 @@ patternProperties: ...@@ -108,6 +109,7 @@ patternProperties:
"^dsi@[1-9a-f][0-9a-f]*$": "^dsi@[1-9a-f][0-9a-f]*$":
type: object type: object
additionalProperties: true
properties: properties:
compatible: compatible:
contains: contains:
...@@ -115,6 +117,7 @@ patternProperties: ...@@ -115,6 +117,7 @@ patternProperties:
"^phy@[1-9a-f][0-9a-f]*$": "^phy@[1-9a-f][0-9a-f]*$":
type: object type: object
additionalProperties: true
properties: properties:
compatible: compatible:
enum: enum:
...@@ -132,6 +135,7 @@ patternProperties: ...@@ -132,6 +135,7 @@ patternProperties:
"^hdmi-tx@[1-9a-f][0-9a-f]*$": "^hdmi-tx@[1-9a-f][0-9a-f]*$":
type: object type: object
additionalProperties: true
properties: properties:
compatible: compatible:
enum: enum:
......
...@@ -12,7 +12,7 @@ maintainers: ...@@ -12,7 +12,7 @@ maintainers:
allOf: allOf:
- $ref: panel-common.yaml# - $ref: panel-common.yaml#
- $ref: /schemas/display/lvds.yaml/# - $ref: /schemas/display/lvds.yaml#
select: select:
properties: properties:
......
...@@ -12,7 +12,7 @@ maintainers: ...@@ -12,7 +12,7 @@ maintainers:
allOf: allOf:
- $ref: panel-common.yaml# - $ref: panel-common.yaml#
- $ref: /schemas/display/lvds.yaml/# - $ref: /schemas/display/lvds.yaml#
select: select:
properties: properties:
......
...@@ -12,7 +12,7 @@ maintainers: ...@@ -12,7 +12,7 @@ maintainers:
allOf: allOf:
- $ref: panel-common.yaml# - $ref: panel-common.yaml#
- $ref: /schemas/display/lvds.yaml/# - $ref: /schemas/display/lvds.yaml#
select: select:
properties: properties:
......
...@@ -12,7 +12,7 @@ maintainers: ...@@ -12,7 +12,7 @@ maintainers:
allOf: allOf:
- $ref: panel-common.yaml# - $ref: panel-common.yaml#
- $ref: /schemas/display/lvds.yaml/# - $ref: /schemas/display/lvds.yaml#
select: select:
properties: properties:
......
...@@ -41,7 +41,7 @@ examples: ...@@ -41,7 +41,7 @@ examples:
- | - |
#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/gpio/gpio.h>
spi0 { spi {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
......
...@@ -12,7 +12,7 @@ maintainers: ...@@ -12,7 +12,7 @@ maintainers:
allOf: allOf:
- $ref: panel-common.yaml# - $ref: panel-common.yaml#
- $ref: /schemas/display/lvds.yaml/# - $ref: /schemas/display/lvds.yaml#
select: select:
properties: properties:
......
...@@ -12,7 +12,7 @@ maintainers: ...@@ -12,7 +12,7 @@ maintainers:
allOf: allOf:
- $ref: panel-common.yaml# - $ref: panel-common.yaml#
- $ref: /schemas/display/lvds.yaml/# - $ref: /schemas/display/lvds.yaml#
select: select:
properties: properties:
......
...@@ -34,8 +34,8 @@ properties: ...@@ -34,8 +34,8 @@ properties:
- items: - items:
- const: sharp,lq101r1sx03 - const: sharp,lq101r1sx03
- const: sharp,lq101r1sx01 - const: sharp,lq101r1sx01
- items: - enum:
- const: sharp,lq101r1sx01 - sharp,lq101r1sx01
reg: true reg: true
power-supply: true power-supply: true
......
...@@ -14,14 +14,12 @@ properties: ...@@ -14,14 +14,12 @@ properties:
compatible: compatible:
oneOf: oneOf:
# Deprecated compatible strings # Deprecated compatible strings
- items:
- enum: - enum:
- solomon,ssd1305fb-i2c - solomon,ssd1305fb-i2c
- solomon,ssd1306fb-i2c - solomon,ssd1306fb-i2c
- solomon,ssd1307fb-i2c - solomon,ssd1307fb-i2c
- solomon,ssd1309fb-i2c - solomon,ssd1309fb-i2c
deprecated: true deprecated: true
- items:
- enum: - enum:
- sinowealth,sh1106 - sinowealth,sh1106
- solomon,ssd1305 - solomon,ssd1305
...@@ -226,7 +224,7 @@ unevaluatedProperties: false ...@@ -226,7 +224,7 @@ unevaluatedProperties: false
examples: examples:
- | - |
i2c1 { i2c {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
...@@ -239,7 +237,7 @@ examples: ...@@ -239,7 +237,7 @@ examples:
ssd1306_i2c: oled@3d { ssd1306_i2c: oled@3d {
compatible = "solomon,ssd1306"; compatible = "solomon,ssd1306";
reg = <0x3c>; reg = <0x3d>;
pwms = <&pwm 4 3000>; pwms = <&pwm 4 3000>;
reset-gpios = <&gpio2 7>; reset-gpios = <&gpio2 7>;
solomon,com-lrremap; solomon,com-lrremap;
......
...@@ -122,7 +122,7 @@ unevaluatedProperties: false ...@@ -122,7 +122,7 @@ unevaluatedProperties: false
examples: examples:
- | - |
#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/gpio/gpio.h>
spi0 { spi {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
......
...@@ -176,6 +176,8 @@ properties: ...@@ -176,6 +176,8 @@ properties:
description: Child nodes are just another property from a json-schema description: Child nodes are just another property from a json-schema
perspective. perspective.
type: object # DT nodes are json objects type: object # DT nodes are json objects
# Child nodes also need additionalProperties or unevaluatedProperties
additionalProperties: false
properties: properties:
vendor,a-child-node-property: vendor,a-child-node-property:
description: Child node properties have all the same schema description: Child node properties have all the same schema
......
...@@ -34,7 +34,7 @@ additionalProperties: false ...@@ -34,7 +34,7 @@ additionalProperties: false
examples: examples:
- | - |
spi0 { spi {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
cros-ec@0 { cros-ec@0 {
......
...@@ -30,7 +30,7 @@ additionalProperties: false ...@@ -30,7 +30,7 @@ additionalProperties: false
examples: examples:
- | - |
i2c0 { i2c {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
tusb320@61 { tusb320@61 {
......
Xilinx LogiCORE Partial Reconfig Decoupler Softcore
The Xilinx LogiCORE Partial Reconfig Decoupler manages one or more
decouplers / fpga bridges.
The controller can decouple/disable the bridges which prevents signal
changes from passing through the bridge. The controller can also
couple / enable the bridges which allows traffic to pass through the
bridge normally.
Xilinx LogiCORE Dynamic Function eXchange(DFX) AXI shutdown manager
Softcore is compatible with the Xilinx LogiCORE pr-decoupler.
The Dynamic Function eXchange AXI shutdown manager prevents AXI traffic
from passing through the bridge. The controller safely handles AXI4MM
and AXI4-Lite interfaces on a Reconfigurable Partition when it is
undergoing dynamic reconfiguration, preventing the system deadlock
that can occur if AXI transactions are interrupted by DFX
The Driver supports only MMIO handling. A PR region can have multiple
PR Decouplers which can be handled independently or chained via decouple/
decouple_status signals.
Required properties:
- compatible : Should contain "xlnx,pr-decoupler-1.00" followed by
"xlnx,pr-decoupler" or
"xlnx,dfx-axi-shutdown-manager-1.00" followed by
"xlnx,dfx-axi-shutdown-manager"
- regs : base address and size for decoupler module
- clocks : input clock to IP
- clock-names : should contain "aclk"
See Documentation/devicetree/bindings/fpga/fpga-region.txt and
Documentation/devicetree/bindings/fpga/fpga-bridge.txt for generic bindings.
Example:
Partial Reconfig Decoupler:
fpga-bridge@100000450 {
compatible = "xlnx,pr-decoupler-1.00",
"xlnx-pr-decoupler";
regs = <0x10000045 0x10>;
clocks = <&clkc 15>;
clock-names = "aclk";
bridge-enable = <0>;
};
Dynamic Function eXchange AXI shutdown manager:
fpga-bridge@100000450 {
compatible = "xlnx,dfx-axi-shutdown-manager-1.00",
"xlnx,dfx-axi-shutdown-manager";
regs = <0x10000045 0x10>;
clocks = <&clkc 15>;
clock-names = "aclk";
bridge-enable = <0>;
};
Xilinx Slave Serial SPI FPGA Manager
Xilinx Spartan-6 and 7 Series FPGAs support a method of loading the
bitstream over what is referred to as "slave serial" interface.
The slave serial link is not technically SPI, and might require extra
circuits in order to play nicely with other SPI slaves on the same bus.
See:
- https://www.xilinx.com/support/documentation/user_guides/ug380.pdf
- https://www.xilinx.com/support/documentation/user_guides/ug470_7Series_Config.pdf
- https://www.xilinx.com/support/documentation/application_notes/xapp583-fpga-configuration.pdf
Required properties:
- compatible: should contain "xlnx,fpga-slave-serial"
- reg: spi chip select of the FPGA
- prog_b-gpios: config pin (referred to as PROGRAM_B in the manual)
- done-gpios: config status pin (referred to as DONE in the manual)
Optional properties:
- init-b-gpios: initialization status and configuration error pin
(referred to as INIT_B in the manual)
Example for full FPGA configuration:
fpga-region0 {
compatible = "fpga-region";
fpga-mgr = <&fpga_mgr_spi>;
#address-cells = <0x1>;
#size-cells = <0x1>;
};
spi1: spi@10680 {
compatible = "marvell,armada-xp-spi", "marvell,orion-spi";
pinctrl-0 = <&spi0_pins>;
pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
cell-index = <1>;
interrupts = <92>;
clocks = <&coreclk 0>;
fpga_mgr_spi: fpga-mgr@0 {
compatible = "xlnx,fpga-slave-serial";
spi-max-frequency = <60000000>;
spi-cpha;
reg = <0>;
prog_b-gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
init-b-gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
done-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
};
};
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/fpga/xlnx,fpga-slave-serial.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Xilinx Slave Serial SPI FPGA
maintainers:
- Nava kishore Manne <nava.kishore.manne@amd.com>
description: |
Xilinx Spartan-6 and 7 Series FPGAs support a method of loading the bitstream
over what is referred to as slave serial interface.The slave serial link is
not technically SPI, and might require extra circuits in order to play nicely
with other SPI slaves on the same bus.
Datasheets:
https://www.xilinx.com/support/documentation/user_guides/ug380.pdf
https://www.xilinx.com/support/documentation/user_guides/ug470_7Series_Config.pdf
https://www.xilinx.com/support/documentation/application_notes/xapp583-fpga-configuration.pdf
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
properties:
compatible:
enum:
- xlnx,fpga-slave-serial
spi-cpha: true
spi-max-frequency:
maximum: 60000000
reg:
maxItems: 1
prog_b-gpios:
description:
config pin (referred to as PROGRAM_B in the manual)
maxItems: 1
done-gpios:
description:
config status pin (referred to as DONE in the manual)
maxItems: 1
init-b-gpios:
description:
initialization status and configuration error pin
(referred to as INIT_B in the manual)
maxItems: 1
required:
- compatible
- reg
- prog_b-gpios
- done-gpios
- init-b-gpios
additionalProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
spi {
#address-cells = <1>;
#size-cells = <0>;
fpga_mgr_spi: fpga-mgr@0 {
compatible = "xlnx,fpga-slave-serial";
spi-max-frequency = <60000000>;
spi-cpha;
reg = <0>;
prog_b-gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
init-b-gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
done-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
};
};
...
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/fpga/xlnx,pr-decoupler.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Xilinx LogiCORE Partial Reconfig Decoupler/AXI shutdown manager Softcore
maintainers:
- Nava kishore Manne <nava.kishore.manne@amd.com>
description: |
The Xilinx LogiCORE Partial Reconfig(PR) Decoupler manages one or more
decouplers/fpga bridges. The controller can decouple/disable the bridges
which prevents signal changes from passing through the bridge. The controller
can also couple / enable the bridges which allows traffic to pass through the
bridge normally.
Xilinx LogiCORE Dynamic Function eXchange(DFX) AXI shutdown manager Softcore
is compatible with the Xilinx LogiCORE pr-decoupler. The Dynamic Function
eXchange AXI shutdown manager prevents AXI traffic from passing through the
bridge. The controller safely handles AXI4MM and AXI4-Lite interfaces on a
Reconfigurable Partition when it is undergoing dynamic reconfiguration,
preventing the system deadlock that can occur if AXI transactions are
interrupted by DFX.
Please refer to fpga-region.txt and fpga-bridge.txt in this directory for
common binding part and usage.
properties:
compatible:
oneOf:
- items:
- const: xlnx,pr-decoupler-1.00
- const: xlnx,pr-decoupler
- items:
- const: xlnx,dfx-axi-shutdown-manager-1.00
- const: xlnx,dfx-axi-shutdown-manager
reg:
maxItems: 1
clocks:
maxItems: 1
clock-names:
items:
- const: aclk
required:
- compatible
- reg
- clocks
- clock-names
additionalProperties: false
examples:
- |
fpga-bridge@100000450 {
compatible = "xlnx,pr-decoupler-1.00", "xlnx,pr-decoupler";
reg = <0x10000045 0x10>;
clocks = <&clkc 15>;
clock-names = "aclk";
};
...
...@@ -34,7 +34,7 @@ additionalProperties: false ...@@ -34,7 +34,7 @@ additionalProperties: false
examples: examples:
- | - |
i2c0 { i2c {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
......
...@@ -151,7 +151,7 @@ examples: ...@@ -151,7 +151,7 @@ examples:
#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/irq.h>
i2c0 { i2c {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
...@@ -177,7 +177,7 @@ examples: ...@@ -177,7 +177,7 @@ examples:
- | - |
#include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/irq.h>
i2c1 { i2c {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
...@@ -203,7 +203,7 @@ examples: ...@@ -203,7 +203,7 @@ examples:
- | - |
#include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/irq.h>
i2c2 { i2c {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
...@@ -221,7 +221,7 @@ examples: ...@@ -221,7 +221,7 @@ examples:
}; };
- | - |
i2c3 { i2c {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
......
...@@ -35,6 +35,7 @@ properties: ...@@ -35,6 +35,7 @@ properties:
patternProperties: patternProperties:
"^.*-pins?$": "^.*-pins?$":
$ref: /schemas/pinctrl/pinmux-node.yaml# $ref: /schemas/pinctrl/pinmux-node.yaml#
additionalProperties: false
properties: properties:
pins: pins:
......
...@@ -32,6 +32,7 @@ properties: ...@@ -32,6 +32,7 @@ properties:
patternProperties: patternProperties:
"^channel@([0-1])$": "^channel@([0-1])$":
type: object type: object
additionalProperties: false
description: | description: |
Represents the two supplies to be monitored. Represents the two supplies to be monitored.
......
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment