Skip to content

L
linux
Commit d43fb9f3 authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge tag 'fbdev-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux 

Pull fbdev updates from Tomi Valkeinen:
 "Summary:

   - pxafb: device-tree support
   - An unsafe kernel parameter 'lockless_register_fb' for debugging
     problems happening while inside the console lock
   - Small miscellaneous fixes & cleanups
   - omapdss: add writeback support functions
   - Separation of omapfb and omapdrm (see below)

  About the separation of omapfb and omapdrm, see

    http://permalink.gmane.org/gmane.comp.video.dri.devel/143151

  for longer story.  The short version:

  omapfb and omapdrm have shared low level drivers (omapdss and panel
  drivers), making further development of omapdrm difficult.  After
  these patches omapfb and omapdrm have their own versions of the
  drivers, which are more or less direct copies for now but will diverge
  soon.

  This also means that omapfb (everything under drivers/video/fbdev/omap2/)
  is now in maintenance mode, and all new development will be done for
  omapdrm (drivers/gpu/drm/omapdrm/)"

* tag 'fbdev-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (49 commits)
  video: fbdev: pxafb: fix out of memory error path
  drm/omap: make omapdrm select OMAP2_DSS
  drm/omap: move omapdss & displays under omapdrm
  omapfb: move vrfb into omapfb
  omapfb: take omapfb's private omapdss into use
  omapfb/displays: change CONFIG_DISPLAY_* to CONFIG_FB_OMAP2_*
  omapfb/dss: change CONFIG_OMAP* to CONFIG_FB_OMAP*
  omapdss: remove CONFIG_OMAP2_DSS_VENC from omapdss.h
  omapfb: copy omapdss & displays for omapfb
  omapfb: allow compilation only if DRM_OMAP is disabled
  fbdev: omap2: panel-dpi: simplify gpio setting
  fbdev: omap2: panel-dpi: in .disable first disable backlight then display
  OMAPDSS: DSS: fix a warning message
  video: omapdss: delete unneeded of_node_put
  OMAPDSS: DISPC: Remove boolean comparisons
  OMAPDSS: DSI: cleanup DSI_IRQ_ERROR_MASK define
  OMAPDSS: remove extra out == NULL checks
  OMAPDSS: change internal dispc functions to static
  OMAPDSS: make a two dss feat funcs internal to omapdss
  OMAPDSS: remove extra EXPORT_SYMBOLs
  ...
parents 5807fcaa 6f6abd36
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 36836 additions and 1701 deletions
Documentation/devicetree/bindings/display/simple-framebuffer.txt
View file @ d43fb9f3
......@@ -47,10 +47,14 @@ Required properties:
- a8b8g8r8 (32-bit pixels, d[31:24]=a, d[23:16]=b, d[15:8]=g, d[7:0]=r).
Optional properties:
- clocks : List of clocks used by the framebuffer. Clocks listed here
are expected to already be configured correctly. The OS must
ensure these clocks are not modified or disabled while the
simple framebuffer remains active.
- clocks : List of clocks used by the framebuffer.
- *-supply : Any number of regulators used by the framebuffer. These should
be named according to the names in the device's design.
The above resources are expected to already be configured correctly.
The OS must ensure they are not modified or disabled while the simple
framebuffer remains active.
- display : phandle pointing to the primary display hardware node
Example:
......@@ -68,6 +72,7 @@ chosen {
stride = <(1600 * 2)>;
format = "r5g6b5";
clocks = <&ahb_gates 36>, <&ahb_gates 43>, <&ahb_gates 44>;
lcd-supply = <&reg_dc1sw>;
display = <&lcdc0>;
};
stdout-path = "display0";
......
drivers/gpu/drm/Makefile
View file @ d43fb9f3
......@@ -62,7 +62,7 @@ obj-$(CONFIG_DRM_ARMADA) += armada/
obj-$(CONFIG_DRM_ATMEL_HLCDC) += atmel-hlcdc/
obj-$(CONFIG_DRM_RCAR_DU) += rcar-du/
obj-$(CONFIG_DRM_SHMOBILE) +=shmobile/
obj-$(CONFIG_DRM_OMAP) += omapdrm/
obj-y += omapdrm/
obj-y += tilcdc/
obj-$(CONFIG_DRM_QXL) += qxl/
obj-$(CONFIG_DRM_BOCHS) += bochs/
......
drivers/gpu/drm/omapdrm/Kconfig
View file @ d43fb9f3
config DRM_OMAP
tristate "OMAP DRM"
depends on DRM
depends on ARCH_OMAP2PLUS || ARCH_MULTIPLATFORM
depends on OMAP2_DSS
select OMAP2_DSS
select DRM_KMS_HELPER
select DRM_KMS_FB_HELPER
select FB_SYS_FILLRECT
......@@ -14,13 +13,18 @@ config DRM_OMAP
help
DRM display driver for OMAP2/3/4 based boards.
if DRM_OMAP
config DRM_OMAP_NUM_CRTCS
int "Number of CRTCs"
range 1 10
default 1 if ARCH_OMAP2 || ARCH_OMAP3
default 2 if ARCH_OMAP4
depends on DRM_OMAP
help
Select the number of video overlays which can be used as framebuffers.
The remaining overlays are reserved for video.
source "drivers/gpu/drm/omapdrm/dss/Kconfig"
source "drivers/gpu/drm/omapdrm/displays/Kconfig"
endif
drivers/gpu/drm/omapdrm/Makefile
View file @ d43fb9f3
......@@ -3,6 +3,9 @@
# Direct Rendering Infrastructure (DRI)
#
obj-y += dss/
obj-y += displays/
ccflags-y := -Iinclude/drm -Werror
omapdrm-y := omap_drv.o \
omap_irq.o \
......
drivers/video/fbdev/omap2/displays-new/Kconfig → drivers/gpu/drm/omapdrm/displays/Kconfig
View file @ d43fb9f3
menu "OMAP Display Device Drivers (new device model)"
depends on OMAP2_DSS
menu "OMAPDRM External Display Device Drivers"
config DISPLAY_ENCODER_OPA362
tristate "OPA362 external analog amplifier"
......
drivers/video/fbdev/omap2/displays-new/panel-dpi.c → drivers/gpu/drm/omapdrm/displays/panel-dpi.c
View file @ d43fb9f3
......@@ -83,8 +83,7 @@ static int panel_dpi_enable(struct omap_dss_device *dssdev)
if (r)
return r;
if (ddata->enable_gpio)
gpiod_set_value_cansleep(ddata->enable_gpio, 1);
gpiod_set_value_cansleep(ddata->enable_gpio, 1);
if (gpio_is_valid(ddata->backlight_gpio))
gpio_set_value_cansleep(ddata->backlight_gpio, 1);
......@@ -102,12 +101,11 @@ static void panel_dpi_disable(struct omap_dss_device *dssdev)
if (!omapdss_device_is_enabled(dssdev))
return;
if (ddata->enable_gpio)
gpiod_set_value_cansleep(ddata->enable_gpio, 0);
if (gpio_is_valid(ddata->backlight_gpio))
gpio_set_value_cansleep(ddata->backlight_gpio, 0);
gpiod_set_value_cansleep(ddata->enable_gpio, 0);
in->ops.dpi->disable(in);
dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
......
drivers/video/fbdev/omap2/dss/dispc-compat.c → drivers/gpu/drm/omapdrm/dss/dispc-compat.c
View file @ d43fb9f3
......@@ -476,7 +476,7 @@ static void dispc_mgr_disable_lcd_out(enum omap_channel channel)
int r;
u32 irq;
if (dispc_mgr_is_enabled(channel) == false)
if (!dispc_mgr_is_enabled(channel))
return;
/*
......@@ -524,7 +524,7 @@ static void dispc_mgr_enable_digit_out(void)
int r;
u32 irq_mask;
if (dispc_mgr_is_enabled(OMAP_DSS_CHANNEL_DIGIT) == true)
if (dispc_mgr_is_enabled(OMAP_DSS_CHANNEL_DIGIT))
return;
/*
......@@ -562,7 +562,7 @@ static void dispc_mgr_disable_digit_out(void)
u32 irq_mask;
int num_irqs;
if (dispc_mgr_is_enabled(OMAP_DSS_CHANNEL_DIGIT) == false)
if (!dispc_mgr_is_enabled(OMAP_DSS_CHANNEL_DIGIT))
return;
/*
......
drivers/video/fbdev/omap2/dss/dispc.h → drivers/gpu/drm/omapdrm/dss/dispc.h
View file @ d43fb9f3
......@@ -908,6 +908,8 @@ static inline u16 DISPC_MFLAG_THRESHOLD_OFFSET(enum omap_plane plane)
return 0x0868;
case OMAP_DSS_VIDEO3:
return 0x086c;
case OMAP_DSS_WB:
return 0x0870;
default:
BUG();
return 0;
......
drivers/video/fbdev/omap2/dss/dpi.c → drivers/gpu/drm/omapdrm/dss/dpi.c
View file @ d43fb9f3
......@@ -395,7 +395,7 @@ static int dpi_display_enable(struct omap_dss_device *dssdev)
goto err_no_reg;
}
if (out == NULL || out->manager == NULL) {
if (out->manager == NULL) {
DSSERR("failed to enable display: no output/manager\n");
r = -ENODEV;
goto err_no_out_mgr;
......
drivers/video/fbdev/omap2/dss/dsi.c → drivers/gpu/drm/omapdrm/dss/dsi.c
View file @ d43fb9f3
......@@ -144,7 +144,7 @@ struct dsi_reg { u16 module; u16 idx; };
#define DSI_IRQ_TA_TIMEOUT (1 << 20)
#define DSI_IRQ_ERROR_MASK \
(DSI_IRQ_HS_TX_TIMEOUT | DSI_IRQ_LP_RX_TIMEOUT | DSI_IRQ_SYNC_LOST | \
DSI_IRQ_TA_TIMEOUT | DSI_IRQ_SYNC_LOST)
DSI_IRQ_TA_TIMEOUT)
#define DSI_IRQ_CHANNEL_MASK 0xf
/* Virtual channel interrupts */
......@@ -3833,7 +3833,7 @@ static int dsi_enable_video_output(struct omap_dss_device *dssdev, int channel)
u16 word_count;
int r;
if (out == NULL || out->manager == NULL) {
if (out->manager == NULL) {
DSSERR("failed to enable display: no output/manager\n");
return -ENODEV;
}
......
drivers/video/fbdev/omap2/dss/dss.c → drivers/gpu/drm/omapdrm/dss/dss.c
View file @ d43fb9f3
......@@ -1264,12 +1264,18 @@ static int dss_runtime_suspend(struct device *dev)
{
dss_save_context();
dss_set_min_bus_tput(dev, 0);
pinctrl_pm_select_sleep_state(dev);
return 0;
}
static int dss_runtime_resume(struct device *dev)
{
int r;
pinctrl_pm_select_default_state(dev);
/*
* Set an arbitrarily high tput request to ensure OPP100.
* What we should really do is to make a request to stay in OPP100,
......
drivers/video/fbdev/omap2/dss/dss.h → drivers/gpu/drm/omapdrm/dss/dss.h
View file @ d43fb9f3
......@@ -343,7 +343,8 @@ u8 dsi_get_pixel_size(enum omap_dss_dsi_pixel_format fmt);
#else
static inline u8 dsi_get_pixel_size(enum omap_dss_dsi_pixel_format fmt)
{
WARN("%s: DSI not compiled in, returning pixel_size as 0\n", __func__);
WARN(1, "%s: DSI not compiled in, returning pixel_size as 0\n",
__func__);
return 0;
}
#endif
......@@ -378,7 +379,6 @@ void dispc_lcd_enable_signal(bool enable);
void dispc_pck_free_enable(bool enable);
void dispc_enable_fifomerge(bool enable);
void dispc_enable_gamma_table(bool enable);
void dispc_set_loadmode(enum omap_dss_load_mode mode);
typedef bool (*dispc_div_calc_func)(int lckd, int pckd, unsigned long lck,
unsigned long pck, void *data);
......@@ -388,7 +388,6 @@ bool dispc_div_calc(unsigned long dispc,
bool dispc_mgr_timings_ok(enum omap_channel channel,
const struct omap_video_timings *timings);
unsigned long dispc_fclk_rate(void);
int dispc_calc_clock_rates(unsigned long dispc_fclk_rate,
struct dispc_clock_info *cinfo);
......@@ -398,9 +397,6 @@ void dispc_ovl_compute_fifo_thresholds(enum omap_plane plane,
u32 *fifo_low, u32 *fifo_high, bool use_fifomerge,
bool manual_update);
unsigned long dispc_mgr_lclk_rate(enum omap_channel channel);
unsigned long dispc_mgr_pclk_rate(enum omap_channel channel);
unsigned long dispc_core_clk_rate(void);
void dispc_mgr_set_clock_div(enum omap_channel channel,
const struct dispc_clock_info *cinfo);
int dispc_mgr_get_clock_div(enum omap_channel channel,
......
drivers/video/fbdev/omap2/dss/dss_features.c → drivers/gpu/drm/omapdrm/dss/dss_features.c
View file @ d43fb9f3
......@@ -46,7 +46,6 @@ struct omap_dss_features {
const int num_mgrs;
const int num_ovls;
const int num_wbs;
const enum omap_display_type *supported_displays;
const enum omap_dss_output_id *supported_outputs;
const enum omap_color_mode *supported_color_modes;
......@@ -735,7 +734,6 @@ static const struct omap_dss_features omap4430_es1_0_dss_features = {
.num_mgrs = 3,
.num_ovls = 4,
.num_wbs = 1,
.supported_displays = omap4_dss_supported_displays,
.supported_outputs = omap4_dss_supported_outputs,
.supported_color_modes = omap4_dss_supported_color_modes,
......@@ -757,7 +755,6 @@ static const struct omap_dss_features omap4430_es2_0_1_2_dss_features = {
.num_mgrs = 3,
.num_ovls = 4,
.num_wbs = 1,
.supported_displays = omap4_dss_supported_displays,
.supported_outputs = omap4_dss_supported_outputs,
.supported_color_modes = omap4_dss_supported_color_modes,
......@@ -779,7 +776,6 @@ static const struct omap_dss_features omap4_dss_features = {
.num_mgrs = 3,
.num_ovls = 4,
.num_wbs = 1,
.supported_displays = omap4_dss_supported_displays,
.supported_outputs = omap4_dss_supported_outputs,
.supported_color_modes = omap4_dss_supported_color_modes,
......@@ -825,11 +821,6 @@ int dss_feat_get_num_ovls(void)
}
EXPORT_SYMBOL(dss_feat_get_num_ovls);
int dss_feat_get_num_wbs(void)
{
return omap_current_dss_features->num_wbs;
}
unsigned long dss_feat_get_param_min(enum dss_range_param param)
{
return omap_current_dss_features->dss_params[param].min;
......@@ -844,13 +835,11 @@ enum omap_display_type dss_feat_get_supported_displays(enum omap_channel channel
{
return omap_current_dss_features->supported_displays[channel];
}
EXPORT_SYMBOL(dss_feat_get_supported_displays);
enum omap_dss_output_id dss_feat_get_supported_outputs(enum omap_channel channel)
{
return omap_current_dss_features->supported_outputs[channel];
}
EXPORT_SYMBOL(dss_feat_get_supported_outputs);
enum omap_color_mode dss_feat_get_supported_color_modes(enum omap_plane plane)
{
......
drivers/video/fbdev/omap2/dss/dss_features.h → drivers/gpu/drm/omapdrm/dss/dss_features.h
View file @ d43fb9f3
......@@ -86,7 +86,6 @@ enum dss_range_param {
};
/* DSS Feature Functions */
int dss_feat_get_num_wbs(void);
unsigned long dss_feat_get_param_min(enum dss_range_param param);
unsigned long dss_feat_get_param_max(enum dss_range_param param);
enum omap_overlay_caps dss_feat_get_overlay_caps(enum omap_plane plane);
......@@ -102,4 +101,8 @@ bool dss_feat_rotation_type_supported(enum omap_dss_rotation_type rot_type);
bool dss_has_feature(enum dss_feat_id id);
void dss_feat_get_reg_field(enum dss_feat_reg_field id, u8 *start, u8 *end);
void dss_features_init(enum omapdss_version version);
enum omap_display_type dss_feat_get_supported_displays(enum omap_channel channel);
enum omap_dss_output_id dss_feat_get_supported_outputs(enum omap_channel channel);
#endif
drivers/video/fbdev/omap2/dss/hdmi4.c → drivers/gpu/drm/omapdrm/dss/hdmi4.c
View file @ d43fb9f3
......@@ -343,7 +343,7 @@ static int hdmi_display_enable(struct omap_dss_device *dssdev)
mutex_lock(&hdmi.lock);
if (out == NULL || out->manager == NULL) {
if (out->manager == NULL) {
DSSERR("failed to enable display: no output/manager\n");
r = -ENODEV;
goto err0;
......
drivers/video/fbdev/omap2/dss/hdmi5.c → drivers/gpu/drm/omapdrm/dss/hdmi5.c
View file @ d43fb9f3
......@@ -373,7 +373,7 @@ static int hdmi_display_enable(struct omap_dss_device *dssdev)
mutex_lock(&hdmi.lock);
if (out == NULL || out->manager == NULL) {
if (out->manager == NULL) {
DSSERR("failed to enable display: no output/manager\n");
r = -ENODEV;
goto err0;
......
drivers/video/fbdev/omap2/dss/manager.c → drivers/gpu/drm/omapdrm/dss/manager.c
View file @ d43fb9f3
......@@ -210,7 +210,7 @@ static int dss_mgr_check_lcd_config(struct omap_overlay_manager *mgr,
return -EINVAL;
/* fifohandcheck should be used only with stallmode */
if (stallmode == false && fifohandcheck == true)
if (!stallmode && fifohandcheck)
return -EINVAL;
/*
......
drivers/video/fbdev/omap2/dss/omapdss-boot-init.c → drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c
View file @ d43fb9f3
......@@ -199,10 +199,8 @@ static int __init omapdss_boot_init(void)
omapdss_walk_device(dss, true);
for_each_available_child_of_node(dss, child) {
if (!of_find_property(child, "compatible", NULL)) {
of_node_put(child);
if (!of_find_property(child, "compatible", NULL))
continue;
}
omapdss_walk_device(child, true);
}
......
drivers/video/fbdev/omap2/dss/rfbi.c → drivers/gpu/drm/omapdrm/dss/rfbi.c
View file @ d43fb9f3
......@@ -880,7 +880,7 @@ static int rfbi_display_enable(struct omap_dss_device *dssdev)
struct omap_dss_device *out = &rfbi.output;
int r;
if (out == NULL || out->manager == NULL) {
if (out->manager == NULL) {
DSSERR("failed to enable display: no output/manager\n");
return -ENODEV;
}
......
drivers/video/fbdev/omap2/dss/sdi.c → drivers/gpu/drm/omapdrm/dss/sdi.c
View file @ d43fb9f3
......@@ -136,7 +136,7 @@ static int sdi_display_enable(struct omap_dss_device *dssdev)
unsigned long pck;
int r;
if (out == NULL || out->manager == NULL) {
if (out->manager == NULL) {
DSSERR("failed to enable display: no output/manager\n");
return -ENODEV;
}
......
drivers/video/fbdev/omap2/dss/venc.c → drivers/gpu/drm/omapdrm/dss/venc.c
View file @ d43fb9f3
......@@ -515,7 +515,7 @@ static int venc_display_enable(struct omap_dss_device *dssdev)
mutex_lock(&venc.venc_lock);
if (out == NULL || out->manager == NULL) {
if (out->manager == NULL) {
DSSERR("Failed to enable display: no output/manager\n");
r = -ENODEV;
goto err0;
......
drivers/media/platform/omap/Kconfig
View file @ d43fb9f3
......@@ -5,9 +5,9 @@ config VIDEO_OMAP2_VOUT
tristate "OMAP2/OMAP3 V4L2-Display driver"
depends on MMU
depends on ARCH_OMAP2 || ARCH_OMAP3
depends on FB_OMAP2
select VIDEOBUF_GEN
select VIDEOBUF_DMA_CONTIG
select OMAP2_DSS if HAS_IOMEM && ARCH_OMAP2PLUS
select OMAP2_VRFB if ARCH_OMAP2 || ARCH_OMAP3
select VIDEO_OMAP2_VOUT_VRFB if VIDEO_OMAP2_VOUT && OMAP2_VRFB
select FRAME_VECTOR
......
drivers/video/fbdev/Kconfig
View file @ d43fb9f3
......@@ -5,6 +5,7 @@
menuconfig FB
tristate "Support for frame buffer devices"
select FB_CMDLINE
select FB_NOTIFY
---help---
The frame buffer device provides an abstraction for the graphics
hardware. It represents the frame buffer of some video hardware and
......@@ -56,6 +57,9 @@ config FIRMWARE_EDID
config FB_CMDLINE
bool
config FB_NOTIFY
bool
config FB_DDC
tristate
depends on FB
......@@ -1506,6 +1510,7 @@ config FB_SIS
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
select FB_BOOT_VESA_SUPPORT if FB_SIS = y
select FB_SIS_300 if !FB_SIS_315
help
This is the frame buffer device driver for the SiS 300, 315, 330
and 340 series as well as XGI V3XT, V5, V8, Z7 graphics chipsets.
......@@ -1880,6 +1885,8 @@ config FB_PXA
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
select VIDEOMODE_HELPERS if OF
select FB_MODE_HELPERS if OF
---help---
Frame buffer driver for the built-in LCD controller in the Intel
PXA2x0 processor.
......@@ -1990,16 +1997,6 @@ config FB_SH_MOBILE_LCDC
---help---
Frame buffer driver for the on-chip SH-Mobile LCD controller.
config FB_SH_MOBILE_HDMI
tristate "SuperH Mobile HDMI controller support"
depends on FB_SH_MOBILE_LCDC
select FB_MODE_HELPERS
select SOUND
select SND
select SND_SOC
---help---
Driver for the on-chip SH-Mobile HDMI controller.
config FB_TMIO
tristate "Toshiba Mobile IO FrameBuffer support"
depends on FB && (MFD_TMIO || COMPILE_TEST)
......
drivers/video/fbdev/Makefile
View file @ d43fb9f3
......@@ -118,7 +118,6 @@ obj-$(CONFIG_FB_UDL) += udlfb.o
obj-$(CONFIG_FB_SMSCUFX) += smscufx.o
obj-$(CONFIG_FB_XILINX) += xilinxfb.o
obj-$(CONFIG_SH_MIPI_DSI) += sh_mipi_dsi.o
obj-$(CONFIG_FB_SH_MOBILE_HDMI) += sh_mobile_hdmi.o
obj-$(CONFIG_FB_SH_MOBILE_MERAM) += sh_mobile_meram.o
obj-$(CONFIG_FB_SH_MOBILE_LCDC) += sh_mobile_lcdcfb.o
obj-$(CONFIG_FB_OMAP) += omap/
......
drivers/video/fbdev/auo_k190x.c
View file @ d43fb9f3
......@@ -773,9 +773,7 @@ static void auok190x_recover(struct auok190xfb_par *par)
/*
* Power-management
*/
#ifdef CONFIG_PM
static int auok190x_runtime_suspend(struct device *dev)
static int __maybe_unused auok190x_runtime_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct fb_info *info = platform_get_drvdata(pdev);
......@@ -822,7 +820,7 @@ static int auok190x_runtime_suspend(struct device *dev)
return 0;
}
static int auok190x_runtime_resume(struct device *dev)
static int __maybe_unused auok190x_runtime_resume(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct fb_info *info = platform_get_drvdata(pdev);
......@@ -856,7 +854,7 @@ static int auok190x_runtime_resume(struct device *dev)
return 0;
}
static int auok190x_suspend(struct device *dev)
static int __maybe_unused auok190x_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct fb_info *info = platform_get_drvdata(pdev);
......@@ -896,7 +894,7 @@ static int auok190x_suspend(struct device *dev)
return 0;
}
static int auok190x_resume(struct device *dev)
static int __maybe_unused auok190x_resume(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct fb_info *info = platform_get_drvdata(pdev);
......@@ -933,7 +931,6 @@ static int auok190x_resume(struct device *dev)
return 0;
}
#endif
const struct dev_pm_ops auok190x_pm = {
SET_RUNTIME_PM_OPS(auok190x_runtime_suspend, auok190x_runtime_resume,
......
drivers/video/fbdev/core/Makefile
View file @ d43fb9f3
obj-y += fb_notify.o
obj-$(CONFIG_FB_CMDLINE) += fb_cmdline.o
obj-$(CONFIG_FB_NOTIFY) += fb_notify.o
obj-$(CONFIG_FB) += fb.o
fb-y := fbmem.o fbmon.o fbcmap.o fbsysfs.o \
modedb.o fbcvt.o
......
drivers/video/fbdev/core/fbmem.c
View file @ d43fb9f3
......@@ -1608,6 +1608,11 @@ static int do_remove_conflicting_framebuffers(struct apertures_struct *a,
return 0;
}
static bool lockless_register_fb;
module_param_named_unsafe(lockless_register_fb, lockless_register_fb, bool, 0400);
MODULE_PARM_DESC(lockless_register_fb,
"Lockless framebuffer registration for debugging [default=off]");
static int do_register_framebuffer(struct fb_info *fb_info)
{
int i, ret;
......@@ -1675,15 +1680,18 @@ static int do_register_framebuffer(struct fb_info *fb_info)
registered_fb[i] = fb_info;
event.info = fb_info;
console_lock();
if (!lockless_register_fb)
console_lock();
if (!lock_fb_info(fb_info)) {
console_unlock();
if (!lockless_register_fb)
console_unlock();
return -ENODEV;
}
fb_notifier_call_chain(FB_EVENT_FB_REGISTERED, &event);
unlock_fb_info(fb_info);
console_unlock();
if (!lockless_register_fb)
console_unlock();
return 0;
}
......
drivers/video/fbdev/geode/display_gx1.c
View file @ d43fb9f3
......@@ -208,7 +208,7 @@ static void gx1_set_hw_palette_reg(struct fb_info *info, unsigned regno,
writel(val, par->dc_regs + DC_PAL_DATA);
}
struct geode_dc_ops gx1_dc_ops = {
const struct geode_dc_ops gx1_dc_ops = {
.set_mode = gx1_set_mode,
.set_palette_reg = gx1_set_hw_palette_reg,
};
drivers/video/fbdev/geode/display_gx1.h
View file @ d43fb9f3
......@@ -18,7 +18,7 @@
unsigned gx1_gx_base(void);
int gx1_frame_buffer_size(void);
extern struct geode_dc_ops gx1_dc_ops;
extern const struct geode_dc_ops gx1_dc_ops;
/* GX1 configuration I/O registers */
......
drivers/video/fbdev/geode/geodefb.h
View file @ d43fb9f3
......@@ -31,8 +31,8 @@ struct geodefb_par {
int panel_y;
void __iomem *dc_regs;
void __iomem *vid_regs;
struct geode_dc_ops *dc_ops;
struct geode_vid_ops *vid_ops;
const struct geode_dc_ops *dc_ops;
const struct geode_vid_ops *vid_ops;
};
#endif /* !__GEODEFB_H__ */
drivers/video/fbdev/geode/video_cs5530.c
View file @ d43fb9f3
......@@ -186,7 +186,7 @@ static int cs5530_blank_display(struct fb_info *info, int blank_mode)
return 0;
}
struct geode_vid_ops cs5530_vid_ops = {
const struct geode_vid_ops cs5530_vid_ops = {
.set_dclk = cs5530_set_dclk_frequency,
.configure_display = cs5530_configure_display,
.blank_display = cs5530_blank_display,
......
drivers/video/fbdev/geode/video_cs5530.h
View file @ d43fb9f3
......@@ -15,7 +15,7 @@
#ifndef __VIDEO_CS5530_H__
#define __VIDEO_CS5530_H__
extern struct geode_vid_ops cs5530_vid_ops;
extern const struct geode_vid_ops cs5530_vid_ops;
/* CS5530 Video device registers */
......
drivers/video/fbdev/i740fb.c
View file @ d43fb9f3
......@@ -346,11 +346,10 @@ static void i740_calc_vclk(u32 freq, struct i740fb_par *par)
const u32 err_target = freq / (1000 * I740_RFREQ / I740_FFIX);
u32 err_best = 512 * I740_FFIX;
u32 f_err, f_vco;
int m_best = 0, n_best = 0, p_best = 0, d_best = 0;
int m_best = 0, n_best = 0, p_best = 0;
int m, n;
p_best = min(15, ilog2(I740_MAX_VCO_FREQ / (freq / I740_RFREQ_FIX)));
d_best = 0;
f_vco = (freq * (1 << p_best)) / I740_RFREQ_FIX;
freq = freq / I740_RFREQ_FIX;
......@@ -363,7 +362,7 @@ static void i740_calc_vclk(u32 freq, struct i740fb_par *par)
m = 3;
{
u32 f_out = (((m * I740_REF_FREQ * (4 << 2 * d_best))
u32 f_out = (((m * I740_REF_FREQ * 4)
/ n) + ((1 << p_best) / 2)) / (1 << p_best);
f_err = (freq - f_out);
......@@ -386,8 +385,7 @@ static void i740_calc_vclk(u32 freq, struct i740fb_par *par)
par->video_clk2_n = (n_best - 2) & 0xFF;
par->video_clk2_mn_msbs = ((((n_best - 2) >> 4) & VCO_N_MSBS)
| (((m_best - 2) >> 8) & VCO_M_MSBS));
par->video_clk2_div_sel =
((p_best << 4) | (d_best ? 4 : 0) | REF_DIV_1);
par->video_clk2_div_sel = ((p_best << 4) | REF_DIV_1);
}
static int i740fb_decode_var(const struct fb_var_screeninfo *var,
......
drivers/video/fbdev/omap2/Kconfig
View file @ d43fb9f3
config OMAP2_VRFB
bool
if ARCH_OMAP2PLUS
source "drivers/video/fbdev/omap2/dss/Kconfig"
source "drivers/video/fbdev/omap2/omapfb/Kconfig"
source "drivers/video/fbdev/omap2/displays-new/Kconfig"
endif
drivers/video/fbdev/omap2/Makefile
View file @ d43fb9f3
obj-$(CONFIG_OMAP2_VRFB) += vrfb.o
obj-y += dss/
obj-y += displays-new/
obj-$(CONFIG_FB_OMAP2) += omapfb/
obj-y += omapfb/
drivers/video/fbdev/omap2/omapfb/Kconfig
View file @ d43fb9f3
config OMAP2_VRFB
bool
menuconfig FB_OMAP2
tristate "OMAP2+ frame buffer support"
depends on FB && OMAP2_DSS && !DRM_OMAP
depends on FB
depends on DRM_OMAP = n
select FB_OMAP2_DSS
select OMAP2_VRFB if ARCH_OMAP2 || ARCH_OMAP3
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
......@@ -9,6 +14,8 @@ menuconfig FB_OMAP2
help
Frame buffer driver for OMAP2+ based boards.
if FB_OMAP2
config FB_OMAP2_DEBUG_SUPPORT
bool "Debug support for OMAP2+ FB"
default y
......@@ -25,3 +32,8 @@ config FB_OMAP2_NUM_FBS
help
Select the number of framebuffers created. OMAP2/3 has 3 overlays
so normally this would be 3.
source "drivers/video/fbdev/omap2/omapfb/dss/Kconfig"
source "drivers/video/fbdev/omap2/omapfb/displays/Kconfig"
endif
drivers/video/fbdev/omap2/omapfb/Makefile
View file @ d43fb9f3
obj-$(CONFIG_OMAP2_VRFB) += vrfb.o
obj-y += dss/
obj-y += displays/
obj-$(CONFIG_FB_OMAP2) += omapfb.o
omapfb-y := omapfb-main.o omapfb-sysfs.o omapfb-ioctl.o
drivers/video/fbdev/omap2/omapfb/displays/Kconfig 0 → 100644
View file @ d43fb9f3
menu "OMAPFB Panel and Encoder Drivers"
depends on FB_OMAP2_DSS
config FB_OMAP2_ENCODER_OPA362
tristate "OPA362 external analog amplifier"
help
Driver for OPA362 external analog TV amplifier controlled
through a GPIO.
config FB_OMAP2_ENCODER_TFP410
tristate "TFP410 DPI to DVI Encoder"
help
Driver for TFP410 DPI to DVI encoder.
config FB_OMAP2_ENCODER_TPD12S015
tristate "TPD12S015 HDMI ESD protection and level shifter"
help
Driver for TPD12S015, which offers HDMI ESD protection and level
shifting.
config FB_OMAP2_CONNECTOR_DVI
tristate "DVI Connector"
depends on I2C
help
Driver for a generic DVI connector.
config FB_OMAP2_CONNECTOR_HDMI
tristate "HDMI Connector"
help
Driver for a generic HDMI connector.
config FB_OMAP2_CONNECTOR_ANALOG_TV
tristate "Analog TV Connector"
help
Driver for a generic analog TV connector.
config FB_OMAP2_PANEL_DPI
tristate "Generic DPI panel"
help
Driver for generic DPI panels.
config FB_OMAP2_PANEL_DSI_CM
tristate "Generic DSI Command Mode Panel"
depends on BACKLIGHT_CLASS_DEVICE
help
Driver for generic DSI command mode panels.
config FB_OMAP2_PANEL_SONY_ACX565AKM
tristate "ACX565AKM Panel"
depends on SPI && BACKLIGHT_CLASS_DEVICE
help
This is the LCD panel used on Nokia N900
config FB_OMAP2_PANEL_LGPHILIPS_LB035Q02
tristate "LG.Philips LB035Q02 LCD Panel"
depends on SPI
help
LCD Panel used on the Gumstix Overo Palo35
config FB_OMAP2_PANEL_SHARP_LS037V7DW01
tristate "Sharp LS037V7DW01 LCD Panel"
depends on BACKLIGHT_CLASS_DEVICE
help
LCD Panel used in TI's SDP3430 and EVM boards
config FB_OMAP2_PANEL_TPO_TD028TTEC1
tristate "TPO TD028TTEC1 LCD Panel"
depends on SPI
help
LCD panel used in Openmoko.
config FB_OMAP2_PANEL_TPO_TD043MTEA1
tristate "TPO TD043MTEA1 LCD Panel"
depends on SPI
help
LCD Panel used in OMAP3 Pandora
config FB_OMAP2_PANEL_NEC_NL8048HL11
tristate "NEC NL8048HL11 Panel"
depends on SPI
depends on BACKLIGHT_CLASS_DEVICE
help
This NEC NL8048HL11 panel is TFT LCD used in the
Zoom2/3/3630 sdp boards.
endmenu
drivers/video/fbdev/omap2/omapfb/displays/Makefile 0 → 100644
View file @ d43fb9f3
obj-$(CONFIG_FB_OMAP2_ENCODER_OPA362) += encoder-opa362.o
obj-$(CONFIG_FB_OMAP2_ENCODER_TFP410) += encoder-tfp410.o
obj-$(CONFIG_FB_OMAP2_ENCODER_TPD12S015) += encoder-tpd12s015.o
obj-$(CONFIG_FB_OMAP2_CONNECTOR_DVI) += connector-dvi.o
obj-$(CONFIG_FB_OMAP2_CONNECTOR_HDMI) += connector-hdmi.o
obj-$(CONFIG_FB_OMAP2_CONNECTOR_ANALOG_TV) += connector-analog-tv.o
obj-$(CONFIG_FB_OMAP2_PANEL_DPI) += panel-dpi.o
obj-$(CONFIG_FB_OMAP2_PANEL_DSI_CM) += panel-dsi-cm.o
obj-$(CONFIG_FB_OMAP2_PANEL_SONY_ACX565AKM) += panel-sony-acx565akm.o
obj-$(CONFIG_FB_OMAP2_PANEL_LGPHILIPS_LB035Q02) += panel-lgphilips-lb035q02.o
obj-$(CONFIG_FB_OMAP2_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o
obj-$(CONFIG_FB_OMAP2_PANEL_TPO_TD028TTEC1) += panel-tpo-td028ttec1.o
obj-$(CONFIG_FB_OMAP2_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o
obj-$(CONFIG_FB_OMAP2_PANEL_NEC_NL8048HL11) += panel-nec-nl8048hl11.o
drivers/video/fbdev/omap2/omapfb/displays/connector-analog-tv.c 0 → 100644
View file @ d43fb9f3
/*
* Analog TV Connector driver
*
* Copyright (C) 2013 Texas Instruments
* Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*/
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/of.h>
#include <video/omapdss.h>
#include <video/omap-panel-data.h>
struct panel_drv_data {
struct omap_dss_device dssdev;
struct omap_dss_device *in;
struct device *dev;
struct omap_video_timings timings;
enum omap_dss_venc_type connector_type;
bool invert_polarity;
};
static const struct omap_video_timings tvc_pal_timings = {
.x_res = 720,
.y_res = 574,
.pixelclock = 13500000,
.hsw = 64,
.hfp = 12,
.hbp = 68,
.vsw = 5,
.vfp = 5,
.vbp = 41,
.interlace = true,
};
static const struct of_device_id tvc_of_match[];
struct tvc_of_data {
enum omap_dss_venc_type connector_type;
};
#define to_panel_data(x) container_of(x, struct panel_drv_data, dssdev)
static int tvc_connect(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *in = ddata->in;
int r;
dev_dbg(ddata->dev, "connect\n");
if (omapdss_device_is_connected(dssdev))
return 0;
r = in->ops.atv->connect(in, dssdev);
if (r)
return r;
return 0;
}
static void tvc_disconnect(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *in = ddata->in;
dev_dbg(ddata->dev, "disconnect\n");
if (!omapdss_device_is_connected(dssdev))
return;
in->ops.atv->disconnect(in, dssdev);
}
static int tvc_enable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *in = ddata->in;
int r;
dev_dbg(ddata->dev, "enable\n");
if (!omapdss_device_is_connected(dssdev))
return -ENODEV;
if (omapdss_device_is_enabled(dssdev))
return 0;
in->ops.atv->set_timings(in, &ddata->timings);
if (!ddata->dev->of_node) {
in->ops.atv->set_type(in, ddata->connector_type);
in->ops.atv->invert_vid_out_polarity(in,
ddata->invert_polarity);
}
r = in->ops.atv->enable(in);
if (r)
return r;
dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
return r;
}
static void tvc_disable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *in = ddata->in;
dev_dbg(ddata->dev, "disable\n");
if (!omapdss_device_is_enabled(dssdev))
return;
in->ops.atv->disable(in);
dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
}
static void tvc_set_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *in = ddata->in;
ddata->timings = *timings;
dssdev->panel.timings = *timings;
in->ops.atv->set_timings(in, timings);
}
static void tvc_get_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
*timings = ddata->timings;
}
static int tvc_check_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *in = ddata->in;
return in->ops.atv->check_timings(in, timings);
}
static u32 tvc_get_wss(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *in = ddata->in;
return in->ops.atv->get_wss(in);
}
static int tvc_set_wss(struct omap_dss_device *dssdev, u32 wss)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *in = ddata->in;
return in->ops.atv->set_wss(in, wss);
}
static struct omap_dss_driver tvc_driver = {
.connect = tvc_connect,
.disconnect = tvc_disconnect,
.enable = tvc_enable,
.disable = tvc_disable,
.set_timings = tvc_set_timings,
.get_timings = tvc_get_timings,
.check_timings = tvc_check_timings,
.get_resolution = omapdss_default_get_resolution,
.get_wss = tvc_get_wss,
.set_wss = tvc_set_wss,
};
static int tvc_probe_pdata(struct platform_device *pdev)
{
struct panel_drv_data *ddata = platform_get_drvdata(pdev);
struct connector_atv_platform_data *pdata;
struct omap_dss_device *in, *dssdev;
pdata = dev_get_platdata(&pdev->dev);
in = omap_dss_find_output(pdata->source);
if (in == NULL) {
dev_err(&pdev->dev, "Failed to find video source\n");
return -EPROBE_DEFER;
}
ddata->in = in;
ddata->connector_type = pdata->connector_type;
ddata->invert_polarity = pdata->invert_polarity;
dssdev = &ddata->dssdev;
dssdev->name = pdata->name;
return 0;
}
static int tvc_probe_of(struct platform_device *pdev)
{
struct panel_drv_data *ddata = platform_get_drvdata(pdev);
struct device_node *node = pdev->dev.of_node;
struct omap_dss_device *in;
in = omapdss_of_find_source_for_first_ep(node);
if (IS_ERR(in)) {
dev_err(&pdev->dev, "failed to find video source\n");
return PTR_ERR(in);
}
ddata->in = in;
return 0;
}
static int tvc_probe(struct platform_device *pdev)
{
struct panel_drv_data *ddata;
struct omap_dss_device *dssdev;
int r;
ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
if (!ddata)
return -ENOMEM;
platform_set_drvdata(pdev, ddata);
ddata->dev = &pdev->dev;
if (dev_get_platdata(&pdev->dev)) {
r = tvc_probe_pdata(pdev);
if (r)
return r;
} else if (pdev->dev.of_node) {
r = tvc_probe_of(pdev);
if (r)
return r;
} else {
return -ENODEV;
}
ddata->timings = tvc_pal_timings;
dssdev = &ddata->dssdev;
dssdev->driver = &tvc_driver;
dssdev->dev = &pdev->dev;
dssdev->type = OMAP_DISPLAY_TYPE_VENC;
dssdev->owner = THIS_MODULE;
dssdev->panel.timings = tvc_pal_timings;
r = omapdss_register_display(dssdev);
if (r) {
dev_err(&pdev->dev, "Failed to register panel\n");
goto err_reg;
}
return 0;
err_reg:
omap_dss_put_device(ddata->in);
return r;
}
static int __exit tvc_remove(struct platform_device *pdev)
{
struct panel_drv_data *ddata = platform_get_drvdata(pdev);
struct omap_dss_device *dssdev = &ddata->dssdev;
struct omap_dss_device *in = ddata->in;
omapdss_unregister_display(&ddata->dssdev);
tvc_disable(dssdev);
tvc_disconnect(dssdev);
omap_dss_put_device(in);
return 0;
}
static const struct of_device_id tvc_of_match[] = {
{ .compatible = "omapdss,svideo-connector", },
{ .compatible = "omapdss,composite-video-connector", },
{},
};
MODULE_DEVICE_TABLE(of, tvc_of_match);
static struct platform_driver tvc_connector_driver = {
.probe = tvc_probe,
.remove = __exit_p(tvc_remove),
.driver = {
.name = "connector-analog-tv",
.of_match_table = tvc_of_match,
.suppress_bind_attrs = true,
},
};
module_platform_driver(tvc_connector_driver);
MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
MODULE_DESCRIPTION("Analog TV Connector driver");
MODULE_LICENSE("GPL");
drivers/video/fbdev/omap2/omapfb/displays/connector-dvi.c 0 → 100644
View file @ d43fb9f3
/*
* Generic DVI Connector driver
*
* Copyright (C) 2013 Texas Instruments
* Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*/
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <drm/drm_edid.h>
#include <video/omapdss.h>
#include <video/omap-panel-data.h>
static const struct omap_video_timings dvic_default_timings = {
.x_res = 640,
.y_res = 480,
.pixelclock = 23500000,
.hfp = 48,
.hsw = 32,
.hbp = 80,
.vfp = 3,
.vsw = 4,
.vbp = 7,
.vsync_level = OMAPDSS_SIG_ACTIVE_HIGH,
.hsync_level = OMAPDSS_SIG_ACTIVE_HIGH,
.data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE,
.de_level = OMAPDSS_SIG_ACTIVE_HIGH,
.sync_pclk_edge = OMAPDSS_DRIVE_SIG_FALLING_EDGE,
};
struct panel_drv_data {
struct omap_dss_device dssdev;
struct omap_dss_device *in;
struct omap_video_timings timings;
struct i2c_adapter *i2c_adapter;
};
#define to_panel_data(x) container_of(x, struct panel_drv_data, dssdev)
static int dvic_connect(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *in = ddata->in;
int r;
if (omapdss_device_is_connected(dssdev))
return 0;
r = in->ops.dvi->connect(in, dssdev);
if (r)
return r;
return 0;
}
static void dvic_disconnect(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *in = ddata->in;
if (!omapdss_device_is_connected(dssdev))
return;
in->ops.dvi->disconnect(in, dssdev);
}
static int dvic_enable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *in = ddata->in;
int r;
if (!omapdss_device_is_connected(dssdev))
return -ENODEV;
if (omapdss_device_is_enabled(dssdev))
return 0;
in->ops.dvi->set_timings(in, &ddata->timings);
r = in->ops.dvi->enable(in);
if (r)
return r;
dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
return 0;
}
static void dvic_disable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *in = ddata->in;
if (!omapdss_device_is_enabled(dssdev))
return;
in->ops.dvi->disable(in);
dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
}
static void dvic_set_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *in = ddata->in;
ddata->timings = *timings;
dssdev->panel.timings = *timings;
in->ops.dvi->set_timings(in, timings);
}
static void dvic_get_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
*timings = ddata->timings;
}
static int dvic_check_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *in = ddata->in;
return in->ops.dvi->check_timings(in, timings);
}
static int dvic_ddc_read(struct i2c_adapter *adapter,
unsigned char *buf, u16 count, u8 offset)
{
int r, retries;
for (retries = 3; retries > 0; retries--) {
struct i2c_msg msgs[] = {
{
.addr = DDC_ADDR,
.flags = 0,
.len = 1,
.buf = &offset,
}, {
.addr = DDC_ADDR,
.flags = I2C_M_RD,
.len = count,
.buf = buf,
}
};
r = i2c_transfer(adapter, msgs, 2);
if (r == 2)
return 0;
if (r != -EAGAIN)
break;
}
return r < 0 ? r : -EIO;
}
static int dvic_read_edid(struct omap_dss_device *dssdev,
u8 *edid, int len)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
int r, l, bytes_read;
if (!ddata->i2c_adapter)
return -ENODEV;
l = min(EDID_LENGTH, len);
r = dvic_ddc_read(ddata->i2c_adapter, edid, l, 0);
if (r)
return r;
bytes_read = l;
/* if there are extensions, read second block */
if (len > EDID_LENGTH && edid[0x7e] > 0) {
l = min(EDID_LENGTH, len - EDID_LENGTH);
r = dvic_ddc_read(ddata->i2c_adapter, edid + EDID_LENGTH,
l, EDID_LENGTH);
if (r)
return r;
bytes_read += l;
}
return bytes_read;
}
static bool dvic_detect(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
unsigned char out;
int r;
if (!ddata->i2c_adapter)
return true;
r = dvic_ddc_read(ddata->i2c_adapter, &out, 1, 0);
return r == 0;
}
static struct omap_dss_driver dvic_driver = {
.connect = dvic_connect,
.disconnect = dvic_disconnect,
.enable = dvic_enable,
.disable = dvic_disable,
.set_timings = dvic_set_timings,
.get_timings = dvic_get_timings,
.check_timings = dvic_check_timings,
.get_resolution = omapdss_default_get_resolution,
.read_edid = dvic_read_edid,
.detect = dvic_detect,
};
static int dvic_probe_pdata(struct platform_device *pdev)
{
struct panel_drv_data *ddata = platform_get_drvdata(pdev);
struct connector_dvi_platform_data *pdata;
struct omap_dss_device *in, *dssdev;
int i2c_bus_num;
pdata = dev_get_platdata(&pdev->dev);
i2c_bus_num = pdata->i2c_bus_num;
if (i2c_bus_num != -1) {
struct i2c_adapter *adapter;
adapter = i2c_get_adapter(i2c_bus_num);
if (!adapter) {
dev_err(&pdev->dev,
"Failed to get I2C adapter, bus %d\n",
i2c_bus_num);
return -EPROBE_DEFER;
}
ddata->i2c_adapter = adapter;
}
in = omap_dss_find_output(pdata->source);
if (in == NULL) {
i2c_put_adapter(ddata->i2c_adapter);
dev_err(&pdev->dev, "Failed to find video source\n");
return -EPROBE_DEFER;
}
ddata->in = in;
dssdev = &ddata->dssdev;
dssdev->name = pdata->name;
return 0;
}
static int dvic_probe_of(struct platform_device *pdev)
{
struct panel_drv_data *ddata = platform_get_drvdata(pdev);
struct device_node *node = pdev->dev.of_node;
struct omap_dss_device *in;
struct device_node *adapter_node;
struct i2c_adapter *adapter;
in = omapdss_of_find_source_for_first_ep(node);
if (IS_ERR(in)) {
dev_err(&pdev->dev, "failed to find video source\n");
return PTR_ERR(in);
}
ddata->in = in;
adapter_node = of_parse_phandle(node, "ddc-i2c-bus", 0);
if (adapter_node) {
adapter = of_get_i2c_adapter_by_node(adapter_node);
if (adapter == NULL) {
dev_err(&pdev->dev, "failed to parse ddc-i2c-bus\n");
omap_dss_put_device(ddata->in);
return -EPROBE_DEFER;
}
ddata->i2c_adapter = adapter;
}
return 0;
}
static int dvic_probe(struct platform_device *pdev)
{
struct panel_drv_data *ddata;
struct omap_dss_device *dssdev;
int r;
ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
if (!ddata)
return -ENOMEM;
platform_set_drvdata(pdev, ddata);
if (dev_get_platdata(&pdev->dev)) {
r = dvic_probe_pdata(pdev);
if (r)
return r;
} else if (pdev->dev.of_node) {
r = dvic_probe_of(pdev);
if (r)
return r;
} else {
return -ENODEV;
}
ddata->timings = dvic_default_timings;
dssdev = &ddata->dssdev;
dssdev->driver = &dvic_driver;
dssdev->dev = &pdev->dev;
dssdev->type = OMAP_DISPLAY_TYPE_DVI;
dssdev->owner = THIS_MODULE;
dssdev->panel.timings = dvic_default_timings;
r = omapdss_register_display(dssdev);
if (r) {
dev_err(&pdev->dev, "Failed to register panel\n");
goto err_reg;
}
return 0;
err_reg:
omap_dss_put_device(ddata->in);
i2c_put_adapter(ddata->i2c_adapter);
return r;
}
static int __exit dvic_remove(struct platform_device *pdev)
{
struct panel_drv_data *ddata = platform_get_drvdata(pdev);
struct omap_dss_device *dssdev = &ddata->dssdev;
struct omap_dss_device *in = ddata->in;
omapdss_unregister_display(&ddata->dssdev);
dvic_disable(dssdev);
dvic_disconnect(dssdev);
omap_dss_put_device(in);
i2c_put_adapter(ddata->i2c_adapter);
return 0;
}
static const struct of_device_id dvic_of_match[] = {
{ .compatible = "omapdss,dvi-connector", },
{},
};
MODULE_DEVICE_TABLE(of, dvic_of_match);
static struct platform_driver dvi_connector_driver = {
.probe = dvic_probe,
.remove = __exit_p(dvic_remove),
.driver = {
.name = "connector-dvi",
.of_match_table = dvic_of_match,
.suppress_bind_attrs = true,
},
};
module_platform_driver(dvi_connector_driver);
MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
MODULE_DESCRIPTION("Generic DVI Connector driver");
MODULE_LICENSE("GPL");
drivers/video/fbdev/omap2/omapfb/displays/connector-hdmi.c 0 → 100644
View file @ d43fb9f3
/*
* HDMI Connector driver
*
* Copyright (C) 2013 Texas Instruments
* Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*/
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
#include <drm/drm_edid.h>
#include <video/omapdss.h>
#include <video/omap-panel-data.h>
static const struct omap_video_timings hdmic_default_timings = {
.x_res = 640,
.y_res = 480,
.pixelclock = 25175000,
.hsw = 96,
.hfp = 16,
.hbp = 48,
.vsw = 2,
.vfp = 11,
.vbp = 31,
.vsync_level = OMAPDSS_SIG_ACTIVE_LOW,
.hsync_level = OMAPDSS_SIG_ACTIVE_LOW,
.interlace = false,
};
struct panel_drv_data {
struct omap_dss_device dssdev;
struct omap_dss_device *in;
struct device *dev;
struct omap_video_timings timings;
int hpd_gpio;
};
#define to_panel_data(x) container_of(x, struct panel_drv_data, dssdev)
static int hdmic_connect(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *in = ddata->in;
int r;
dev_dbg(ddata->dev, "connect\n");
if (omapdss_device_is_connected(dssdev))
return 0;
r = in->ops.hdmi->connect(in, dssdev);
if (r)
return r;
return 0;
}
static void hdmic_disconnect(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *in = ddata->in;
dev_dbg(ddata->dev, "disconnect\n");
if (!omapdss_device_is_connected(dssdev))
return;
in->ops.hdmi->disconnect(in, dssdev);
}
static int hdmic_enable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *in = ddata->in;
int r;
dev_dbg(ddata->dev, "enable\n");
if (!omapdss_device_is_connected(dssdev))
return -ENODEV;
if (omapdss_device_is_enabled(dssdev))
return 0;
in->ops.hdmi->set_timings(in, &ddata->timings);
r = in->ops.hdmi->enable(in);
if (r)
return r;
dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
return r;
}
static void hdmic_disable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *in = ddata->in;
dev_dbg(ddata->dev, "disable\n");
if (!omapdss_device_is_enabled(dssdev))
return;
in->ops.hdmi->disable(in);
dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
}
static void hdmic_set_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *in = ddata->in;
ddata->timings = *timings;
dssdev->panel.timings = *timings;
in->ops.hdmi->set_timings(in, timings);
}
static void hdmic_get_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
*timings = ddata->timings;
}
static int hdmic_check_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *in = ddata->in;
return in->ops.hdmi->check_timings(in, timings);
}
static int hdmic_read_edid(struct omap_dss_device *dssdev,
u8 *edid, int len)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *in = ddata->in;
return in->ops.hdmi->read_edid(in, edid, len);
}
static bool hdmic_detect(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *in = ddata->in;
if (gpio_is_valid(ddata->hpd_gpio))
return gpio_get_value_cansleep(ddata->hpd_gpio);
else
return in->ops.hdmi->detect(in);
}
static int hdmic_set_hdmi_mode(struct omap_dss_device *dssdev, bool hdmi_mode)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *in = ddata->in;
return in->ops.hdmi->set_hdmi_mode(in, hdmi_mode);
}
static int hdmic_set_infoframe(struct omap_dss_device *dssdev,
const struct hdmi_avi_infoframe *avi)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *in = ddata->in;
return in->ops.hdmi->set_infoframe(in, avi);
}
static struct omap_dss_driver hdmic_driver = {
.connect = hdmic_connect,
.disconnect = hdmic_disconnect,
.enable = hdmic_enable,
.disable = hdmic_disable,
.set_timings = hdmic_set_timings,
.get_timings = hdmic_get_timings,
.check_timings = hdmic_check_timings,
.get_resolution = omapdss_default_get_resolution,
.read_edid = hdmic_read_edid,
.detect = hdmic_detect,
.set_hdmi_mode = hdmic_set_hdmi_mode,
.set_hdmi_infoframe = hdmic_set_infoframe,
};
static int hdmic_probe_pdata(struct platform_device *pdev)
{
struct panel_drv_data *ddata = platform_get_drvdata(pdev);
struct connector_hdmi_platform_data *pdata;
struct omap_dss_device *in, *dssdev;
pdata = dev_get_platdata(&pdev->dev);
ddata->hpd_gpio = -ENODEV;
in = omap_dss_find_output(pdata->source);
if (in == NULL) {
dev_err(&pdev->dev, "Failed to find video source\n");
return -EPROBE_DEFER;
}
ddata->in = in;
dssdev = &ddata->dssdev;
dssdev->name = pdata->name;
return 0;
}
static int hdmic_probe_of(struct platform_device *pdev)
{
struct panel_drv_data *ddata = platform_get_drvdata(pdev);
struct device_node *node = pdev->dev.of_node;
struct omap_dss_device *in;
int gpio;
/* HPD GPIO */
gpio = of_get_named_gpio(node, "hpd-gpios", 0);
if (gpio_is_valid(gpio))
ddata->hpd_gpio = gpio;
else
ddata->hpd_gpio = -ENODEV;
in = omapdss_of_find_source_for_first_ep(node);
if (IS_ERR(in)) {
dev_err(&pdev->dev, "failed to find video source\n");
return PTR_ERR(in);
}
ddata->in = in;
return 0;
}
static int hdmic_probe(struct platform_device *pdev)
{
struct panel_drv_data *ddata;
struct omap_dss_device *dssdev;
int r;
ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
if (!ddata)
return -ENOMEM;
platform_set_drvdata(pdev, ddata);
ddata->dev = &pdev->dev;
if (dev_get_platdata(&pdev->dev)) {
r = hdmic_probe_pdata(pdev);
if (r)
return r;
} else if (pdev->dev.of_node) {
r = hdmic_probe_of(pdev);
if (r)
return r;
} else {
return -ENODEV;
}
if (gpio_is_valid(ddata->hpd_gpio)) {
r = devm_gpio_request_one(&pdev->dev, ddata->hpd_gpio,
GPIOF_DIR_IN, "hdmi_hpd");
if (r)
goto err_reg;
}
ddata->timings = hdmic_default_timings;
dssdev = &ddata->dssdev;
dssdev->driver = &hdmic_driver;
dssdev->dev = &pdev->dev;
dssdev->type = OMAP_DISPLAY_TYPE_HDMI;
dssdev->owner = THIS_MODULE;
dssdev->panel.timings = hdmic_default_timings;
r = omapdss_register_display(dssdev);
if (r) {
dev_err(&pdev->dev, "Failed to register panel\n");
goto err_reg;
}
return 0;
err_reg:
omap_dss_put_device(ddata->in);
return r;
}
static int __exit hdmic_remove(struct platform_device *pdev)
{
struct panel_drv_data *ddata = platform_get_drvdata(pdev);
struct omap_dss_device *dssdev = &ddata->dssdev;
struct omap_dss_device *in = ddata->in;
omapdss_unregister_display(&ddata->dssdev);
hdmic_disable(dssdev);
hdmic_disconnect(dssdev);
omap_dss_put_device(in);
return 0;
}
static const struct of_device_id hdmic_of_match[] = {
{ .compatible = "omapdss,hdmi-connector", },
{},
};
MODULE_DEVICE_TABLE(of, hdmic_of_match);
static struct platform_driver hdmi_connector_driver = {
.probe = hdmic_probe,
.remove = __exit_p(hdmic_remove),
.driver = {
.name = "connector-hdmi",
.of_match_table = hdmic_of_match,
.suppress_bind_attrs = true,
},
};
module_platform_driver(hdmi_connector_driver);
MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
MODULE_DESCRIPTION("HDMI Connector driver");
MODULE_LICENSE("GPL");
drivers/video/fbdev/omap2/omapfb/displays/encoder-opa362.c 0 → 100644
View file @ d43fb9f3
/*
* OPA362 analog video amplifier with output/power control
*
* Copyright (C) 2014 Golden Delicious Computers
* Author: H. Nikolaus Schaller <hns@goldelico.com>
*
* based on encoder-tfp410
*
* Copyright (C) 2013 Texas Instruments
* Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*/
#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/of_gpio.h>
#include <video/omapdss.h>
struct panel_drv_data {
struct omap_dss_device dssdev;
struct omap_dss_device *in;
struct gpio_desc *enable_gpio;
struct omap_video_timings timings;
};
#define to_panel_data(x) container_of(x, struct panel_drv_data, dssdev)
static int opa362_connect(struct omap_dss_device *dssdev,
struct omap_dss_device *dst)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *in = ddata->in;
int r;
dev_dbg(dssdev->dev, "connect\n");
if (omapdss_device_is_connected(dssdev))
return -EBUSY;
r = in->ops.atv->connect(in, dssdev);
if (r)
return r;
dst->src = dssdev;
dssdev->dst = dst;
return 0;
}
static void opa362_disconnect(struct omap_dss_device *dssdev,
struct omap_dss_device *dst)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *in = ddata->in;
dev_dbg(dssdev->dev, "disconnect\n");
WARN_ON(!omapdss_device_is_connected(dssdev));
if (!omapdss_device_is_connected(dssdev))
return;
WARN_ON(dst != dssdev->dst);
if (dst != dssdev->dst)
return;
dst->src = NULL;
dssdev->dst = NULL;
in->ops.atv->disconnect(in, &ddata->dssdev);
}
static int opa362_enable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *in = ddata->in;
int r;
dev_dbg(dssdev->dev, "enable\n");
if (!omapdss_device_is_connected(dssdev))
return -ENODEV;
if (omapdss_device_is_enabled(dssdev))
return 0;
in->ops.atv->set_timings(in, &ddata->timings);
r = in->ops.atv->enable(in);
if (r)
return r;
if (ddata->enable_gpio)
gpiod_set_value_cansleep(ddata->enable_gpio, 1);
dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
return 0;
}
static void opa362_disable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *in = ddata->in;
dev_dbg(dssdev->dev, "disable\n");
if (!omapdss_device_is_enabled(dssdev))
return;
if (ddata->enable_gpio)
gpiod_set_value_cansleep(ddata->enable_gpio, 0);
in->ops.atv->disable(in);
dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
}
static void opa362_set_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *in = ddata->in;
dev_dbg(dssdev->dev, "set_timings\n");
ddata->timings = *timings;
dssdev->panel.timings = *timings;
in->ops.atv->set_timings(in, timings);
}
static void opa362_get_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
dev_dbg(dssdev->dev, "get_timings\n");
*timings = ddata->timings;
}
static int opa362_check_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *in = ddata->in;
dev_dbg(dssdev->dev, "check_timings\n");
return in->ops.atv->check_timings(in, timings);
}
static void opa362_set_type(struct omap_dss_device *dssdev,
enum omap_dss_venc_type type)
{
/* we can only drive a COMPOSITE output */
WARN_ON(type != OMAP_DSS_VENC_TYPE_COMPOSITE);
}
static const struct omapdss_atv_ops opa362_atv_ops = {
.connect = opa362_connect,
.disconnect = opa362_disconnect,
.enable = opa362_enable,
.disable = opa362_disable,
.check_timings = opa362_check_timings,
.set_timings = opa362_set_timings,
.get_timings = opa362_get_timings,
.set_type = opa362_set_type,
};
static int opa362_probe(struct platform_device *pdev)
{
struct device_node *node = pdev->dev.of_node;
struct panel_drv_data *ddata;
struct omap_dss_device *dssdev, *in;
struct gpio_desc *gpio;
int r;
dev_dbg(&pdev->dev, "probe\n");
if (node == NULL) {
dev_err(&pdev->dev, "Unable to find device tree\n");
return -EINVAL;
}
ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
if (!ddata)
return -ENOMEM;
platform_set_drvdata(pdev, ddata);
gpio = devm_gpiod_get_optional(&pdev->dev, "enable", GPIOD_OUT_LOW);
if (IS_ERR(gpio))
return PTR_ERR(gpio);
ddata->enable_gpio = gpio;
in = omapdss_of_find_source_for_first_ep(node);
if (IS_ERR(in)) {
dev_err(&pdev->dev, "failed to find video source\n");
return PTR_ERR(in);
}
ddata->in = in;
dssdev = &ddata->dssdev;
dssdev->ops.atv = &opa362_atv_ops;
dssdev->dev = &pdev->dev;
dssdev->type = OMAP_DISPLAY_TYPE_VENC;
dssdev->output_type = OMAP_DISPLAY_TYPE_VENC;
dssdev->owner = THIS_MODULE;
r = omapdss_register_output(dssdev);
if (r) {
dev_err(&pdev->dev, "Failed to register output\n");
goto err_reg;
}
return 0;
err_reg:
omap_dss_put_device(ddata->in);
return r;
}
static int __exit opa362_remove(struct platform_device *pdev)
{
struct panel_drv_data *ddata = platform_get_drvdata(pdev);
struct omap_dss_device *dssdev = &ddata->dssdev;
struct omap_dss_device *in = ddata->in;
omapdss_unregister_output(&ddata->dssdev);
WARN_ON(omapdss_device_is_enabled(dssdev));
if (omapdss_device_is_enabled(dssdev))
opa362_disable(dssdev);
WARN_ON(omapdss_device_is_connected(dssdev));
if (omapdss_device_is_connected(dssdev))
opa362_disconnect(dssdev, dssdev->dst);
omap_dss_put_device(in);
return 0;
}
static const struct of_device_id opa362_of_match[] = {
{ .compatible = "omapdss,ti,opa362", },
{},
};
MODULE_DEVICE_TABLE(of, opa362_of_match);
static struct platform_driver opa362_driver = {
.probe = opa362_probe,
.remove = __exit_p(opa362_remove),
.driver = {
.name = "amplifier-opa362",
.of_match_table = opa362_of_match,
.suppress_bind_attrs = true,
},
};
module_platform_driver(opa362_driver);
MODULE_AUTHOR("H. Nikolaus Schaller <hns@goldelico.com>");
MODULE_DESCRIPTION("OPA362 analog video amplifier with output/power control");
MODULE_LICENSE("GPL v2");
drivers/video/fbdev/omap2/omapfb/displays/encoder-tfp410.c 0 → 100644
View file @ d43fb9f3
/*
* TFP410 DPI-to-DVI encoder driver
*
* Copyright (C) 2013 Texas Instruments
* Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*/
#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/of_gpio.h>
#include <video/omapdss.h>
#include <video/omap-panel-data.h>
struct panel_drv_data {
struct omap_dss_device dssdev;
struct omap_dss_device *in;
int pd_gpio;
int data_lines;
struct omap_video_timings timings;
};
#define to_panel_data(x) container_of(x, struct panel_drv_data, dssdev)
static int tfp410_connect(struct omap_dss_device *dssdev,
struct omap_dss_device *dst)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *in = ddata->in;
int r;
if (omapdss_device_is_connected(dssdev))
return -EBUSY;
r = in->ops.dpi->connect(in, dssdev);
if (r)
return r;
dst->src = dssdev;
dssdev->dst = dst;
return 0;
}
static void tfp410_disconnect(struct omap_dss_device *dssdev,
struct omap_dss_device *dst)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *in = ddata->in;
WARN_ON(!omapdss_device_is_connected(dssdev));
if (!omapdss_device_is_connected(dssdev))
return;
WARN_ON(dst != dssdev->dst);
if (dst != dssdev->dst)
return;
dst->src = NULL;
dssdev->dst = NULL;
in->ops.dpi->disconnect(in, &ddata->dssdev);
}
static int tfp410_enable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *in = ddata->in;
int r;
if (!omapdss_device_is_connected(dssdev))
return -ENODEV;
if (omapdss_device_is_enabled(dssdev))
return 0;
in->ops.dpi->set_timings(in, &ddata->timings);
if (ddata->data_lines)
in->ops.dpi->set_data_lines(in, ddata->data_lines);
r = in->ops.dpi->enable(in);
if (r)
return r;
if (gpio_is_valid(ddata->pd_gpio))
gpio_set_value_cansleep(ddata->pd_gpio, 1);
dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
return 0;
}
static void tfp410_disable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *in = ddata->in;
if (!omapdss_device_is_enabled(dssdev))
return;
if (gpio_is_valid(ddata->pd_gpio))
gpio_set_value_cansleep(ddata->pd_gpio, 0);
in->ops.dpi->disable(in);
dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
}
static void tfp410_fix_timings(struct omap_video_timings *timings)
{
timings->data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE;
timings->sync_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE;
timings->de_level = OMAPDSS_SIG_ACTIVE_HIGH;
}
static void tfp410_set_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *in = ddata->in;
tfp410_fix_timings(timings);
ddata->timings = *timings;
dssdev->panel.timings = *timings;
in->ops.dpi->set_timings(in, timings);
}
static void tfp410_get_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
*timings = ddata->timings;
}
static int tfp410_check_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *in = ddata->in;
tfp410_fix_timings(timings);
return in->ops.dpi->check_timings(in, timings);
}
static const struct omapdss_dvi_ops tfp410_dvi_ops = {
.connect = tfp410_connect,
.disconnect = tfp410_disconnect,
.enable = tfp410_enable,
.disable = tfp410_disable,
.check_timings = tfp410_check_timings,
.set_timings = tfp410_set_timings,
.get_timings = tfp410_get_timings,
};
static int tfp410_probe_pdata(struct platform_device *pdev)
{
struct panel_drv_data *ddata = platform_get_drvdata(pdev);
struct encoder_tfp410_platform_data *pdata;
struct omap_dss_device *dssdev, *in;
pdata = dev_get_platdata(&pdev->dev);
ddata->pd_gpio = pdata->power_down_gpio;
ddata->data_lines = pdata->data_lines;
in = omap_dss_find_output(pdata->source);
if (in == NULL) {
dev_err(&pdev->dev, "Failed to find video source\n");
return -ENODEV;
}
ddata->in = in;
dssdev = &ddata->dssdev;
dssdev->name = pdata->name;
return 0;
}
static int tfp410_probe_of(struct platform_device *pdev)
{
struct panel_drv_data *ddata = platform_get_drvdata(pdev);
struct device_node *node = pdev->dev.of_node;
struct omap_dss_device *in;
int gpio;
gpio = of_get_named_gpio(node, "powerdown-gpios", 0);
if (gpio_is_valid(gpio) || gpio == -ENOENT) {
ddata->pd_gpio = gpio;
} else {
dev_err(&pdev->dev, "failed to parse PD gpio\n");
return gpio;
}
in = omapdss_of_find_source_for_first_ep(node);
if (IS_ERR(in)) {
dev_err(&pdev->dev, "failed to find video source\n");
return PTR_ERR(in);
}
ddata->in = in;
return 0;
}
static int tfp410_probe(struct platform_device *pdev)
{
struct panel_drv_data *ddata;
struct omap_dss_device *dssdev;
int r;
ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
if (!ddata)
return -ENOMEM;
platform_set_drvdata(pdev, ddata);
if (dev_get_platdata(&pdev->dev)) {
r = tfp410_probe_pdata(pdev);
if (r)
return r;
} else if (pdev->dev.of_node) {
r = tfp410_probe_of(pdev);
if (r)
return r;
} else {
return -ENODEV;
}
if (gpio_is_valid(ddata->pd_gpio)) {
r = devm_gpio_request_one(&pdev->dev, ddata->pd_gpio,
GPIOF_OUT_INIT_LOW, "tfp410 PD");
if (r) {
dev_err(&pdev->dev, "Failed to request PD GPIO %d\n",
ddata->pd_gpio);
goto err_gpio;
}
}
dssdev = &ddata->dssdev;
dssdev->ops.dvi = &tfp410_dvi_ops;
dssdev->dev = &pdev->dev;
dssdev->type = OMAP_DISPLAY_TYPE_DPI;
dssdev->output_type = OMAP_DISPLAY_TYPE_DVI;
dssdev->owner = THIS_MODULE;
dssdev->phy.dpi.data_lines = ddata->data_lines;
dssdev->port_num = 1;
r = omapdss_register_output(dssdev);
if (r) {
dev_err(&pdev->dev, "Failed to register output\n");
goto err_reg;
}
return 0;
err_reg:
err_gpio:
omap_dss_put_device(ddata->in);
return r;
}
static int __exit tfp410_remove(struct platform_device *pdev)
{
struct panel_drv_data *ddata = platform_get_drvdata(pdev);
struct omap_dss_device *dssdev = &ddata->dssdev;
struct omap_dss_device *in = ddata->in;
omapdss_unregister_output(&ddata->dssdev);
WARN_ON(omapdss_device_is_enabled(dssdev));
if (omapdss_device_is_enabled(dssdev))
tfp410_disable(dssdev);
WARN_ON(omapdss_device_is_connected(dssdev));
if (omapdss_device_is_connected(dssdev))
tfp410_disconnect(dssdev, dssdev->dst);
omap_dss_put_device(in);
return 0;
}
static const struct of_device_id tfp410_of_match[] = {
{ .compatible = "omapdss,ti,tfp410", },
{},
};
MODULE_DEVICE_TABLE(of, tfp410_of_match);
static struct platform_driver tfp410_driver = {
.probe = tfp410_probe,
.remove = __exit_p(tfp410_remove),
.driver = {
.name = "tfp410",
.of_match_table = tfp410_of_match,
.suppress_bind_attrs = true,
},
};
module_platform_driver(tfp410_driver);
MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
MODULE_DESCRIPTION("TFP410 DPI to DVI encoder driver");
MODULE_LICENSE("GPL");
drivers/video/fbdev/omap2/omapfb/displays/encoder-tpd12s015.c 0 → 100644
View file @ d43fb9f3
/*
* TPD12S015 HDMI ESD protection & level shifter chip driver
*
* Copyright (C) 2013 Texas Instruments
* Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*/
#include <linux/completion.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/gpio/consumer.h>
#include <video/omapdss.h>
#include <video/omap-panel-data.h>
struct panel_drv_data {
struct omap_dss_device dssdev;
struct omap_dss_device *in;
struct gpio_desc *ct_cp_hpd_gpio;
struct gpio_desc *ls_oe_gpio;
struct gpio_desc *hpd_gpio;
struct omap_video_timings timings;
};
#define to_panel_data(x) container_of(x, struct panel_drv_data, dssdev)
static int tpd_connect(struct omap_dss_device *dssdev,
struct omap_dss_device *dst)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *in = ddata->in;
int r;
r = in->ops.hdmi->connect(in, dssdev);
if (r)
return r;
dst->src = dssdev;
dssdev->dst = dst;
if (ddata->ct_cp_hpd_gpio) {
gpiod_set_value_cansleep(ddata->ct_cp_hpd_gpio, 1);
/* DC-DC converter needs at max 300us to get to 90% of 5V */
udelay(300);
}
return 0;
}
static void tpd_disconnect(struct omap_dss_device *dssdev,
struct omap_dss_device *dst)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *in = ddata->in;
WARN_ON(dst != dssdev->dst);
if (dst != dssdev->dst)
return;
gpiod_set_value_cansleep(ddata->ct_cp_hpd_gpio, 0);
dst->src = NULL;
dssdev->dst = NULL;
in->ops.hdmi->disconnect(in, &ddata->dssdev);
}
static int tpd_enable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *in = ddata->in;
int r;
if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
return 0;
in->ops.hdmi->set_timings(in, &ddata->timings);
r = in->ops.hdmi->enable(in);
if (r)
return r;
dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
return r;
}
static void tpd_disable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *in = ddata->in;
if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
return;
in->ops.hdmi->disable(in);
dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
}
static void tpd_set_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *in = ddata->in;
ddata->timings = *timings;
dssdev->panel.timings = *timings;
in->ops.hdmi->set_timings(in, timings);
}
static void tpd_get_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
*timings = ddata->timings;
}
static int tpd_check_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *in = ddata->in;
int r;
r = in->ops.hdmi->check_timings(in, timings);
return r;
}
static int tpd_read_edid(struct omap_dss_device *dssdev,
u8 *edid, int len)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *in = ddata->in;
int r;
if (!gpiod_get_value_cansleep(ddata->hpd_gpio))
return -ENODEV;
gpiod_set_value_cansleep(ddata->ls_oe_gpio, 1);
r = in->ops.hdmi->read_edid(in, edid, len);
gpiod_set_value_cansleep(ddata->ls_oe_gpio, 0);
return r;
}
static bool tpd_detect(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
return gpiod_get_value_cansleep(ddata->hpd_gpio);
}
static int tpd_set_infoframe(struct omap_dss_device *dssdev,
const struct hdmi_avi_infoframe *avi)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *in = ddata->in;
return in->ops.hdmi->set_infoframe(in, avi);
}
static int tpd_set_hdmi_mode(struct omap_dss_device *dssdev,
bool hdmi_mode)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *in = ddata->in;
return in->ops.hdmi->set_hdmi_mode(in, hdmi_mode);
}
static const struct omapdss_hdmi_ops tpd_hdmi_ops = {
.connect = tpd_connect,
.disconnect = tpd_disconnect,
.enable = tpd_enable,
.disable = tpd_disable,
.check_timings = tpd_check_timings,
.set_timings = tpd_set_timings,
.get_timings = tpd_get_timings,
.read_edid = tpd_read_edid,
.detect = tpd_detect,
.set_infoframe = tpd_set_infoframe,
.set_hdmi_mode = tpd_set_hdmi_mode,
};
static int tpd_probe_of(struct platform_device *pdev)
{
struct panel_drv_data *ddata = platform_get_drvdata(pdev);
struct device_node *node = pdev->dev.of_node;
struct omap_dss_device *in;
in = omapdss_of_find_source_for_first_ep(node);
if (IS_ERR(in)) {
dev_err(&pdev->dev, "failed to find video source\n");
return PTR_ERR(in);
}
ddata->in = in;
return 0;
}
static int tpd_probe(struct platform_device *pdev)
{
struct omap_dss_device *in, *dssdev;
struct panel_drv_data *ddata;
int r;
struct gpio_desc *gpio;
ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
if (!ddata)
return -ENOMEM;
platform_set_drvdata(pdev, ddata);
if (pdev->dev.of_node) {
r = tpd_probe_of(pdev);
if (r)
return r;
} else {
return -ENODEV;
}
gpio = devm_gpiod_get_index_optional(&pdev->dev, NULL, 0,
GPIOD_OUT_LOW);
if (IS_ERR(gpio))
goto err_gpio;
ddata->ct_cp_hpd_gpio = gpio;
gpio = devm_gpiod_get_index_optional(&pdev->dev, NULL, 1,
GPIOD_OUT_LOW);
if (IS_ERR(gpio))
goto err_gpio;
ddata->ls_oe_gpio = gpio;
gpio = devm_gpiod_get_index(&pdev->dev, NULL, 2,
GPIOD_IN);
if (IS_ERR(gpio))
goto err_gpio;
ddata->hpd_gpio = gpio;
dssdev = &ddata->dssdev;
dssdev->ops.hdmi = &tpd_hdmi_ops;
dssdev->dev = &pdev->dev;
dssdev->type = OMAP_DISPLAY_TYPE_HDMI;
dssdev->output_type = OMAP_DISPLAY_TYPE_HDMI;
dssdev->owner = THIS_MODULE;
dssdev->port_num = 1;
in = ddata->in;
r = omapdss_register_output(dssdev);
if (r) {
dev_err(&pdev->dev, "Failed to register output\n");
goto err_reg;
}
return 0;
err_reg:
err_gpio:
omap_dss_put_device(ddata->in);
return r;
}
static int __exit tpd_remove(struct platform_device *pdev)
{
struct panel_drv_data *ddata = platform_get_drvdata(pdev);
struct omap_dss_device *dssdev = &ddata->dssdev;
struct omap_dss_device *in = ddata->in;
omapdss_unregister_output(&ddata->dssdev);
WARN_ON(omapdss_device_is_enabled(dssdev));
if (omapdss_device_is_enabled(dssdev))
tpd_disable(dssdev);
WARN_ON(omapdss_device_is_connected(dssdev));
if (omapdss_device_is_connected(dssdev))
tpd_disconnect(dssdev, dssdev->dst);
omap_dss_put_device(in);
return 0;
}
static const struct of_device_id tpd_of_match[] = {
{ .compatible = "omapdss,ti,tpd12s015", },
{},
};
MODULE_DEVICE_TABLE(of, tpd_of_match);
static struct platform_driver tpd_driver = {
.probe = tpd_probe,
.remove = __exit_p(tpd_remove),
.driver = {
.name = "tpd12s015",
.of_match_table = tpd_of_match,
.suppress_bind_attrs = true,
},
};
module_platform_driver(tpd_driver);
MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
MODULE_DESCRIPTION("TPD12S015 driver");
MODULE_LICENSE("GPL");
drivers/video/fbdev/omap2/omapfb/displays/panel-dpi.c 0 → 100644
View file @ d43fb9f3
/*
* Generic MIPI DPI Panel Driver
*
* Copyright (C) 2013 Texas Instruments
* Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*/
#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
#include <video/omapdss.h>
#include <video/omap-panel-data.h>
#include <video/of_display_timing.h>
struct panel_drv_data {
struct omap_dss_device dssdev;
struct omap_dss_device *in;
int data_lines;
struct omap_video_timings videomode;
/* used for non-DT boot, to be removed */
int backlight_gpio;
struct gpio_desc *enable_gpio;
};
#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
static int panel_dpi_connect(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *in = ddata->in;
int r;
if (omapdss_device_is_connected(dssdev))
return 0;
r = in->ops.dpi->connect(in, dssdev);
if (r)
return r;
return 0;
}
static void panel_dpi_disconnect(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *in = ddata->in;
if (!omapdss_device_is_connected(dssdev))
return;
in->ops.dpi->disconnect(in, dssdev);
}
static int panel_dpi_enable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *in = ddata->in;
int r;
if (!omapdss_device_is_connected(dssdev))
return -ENODEV;
if (omapdss_device_is_enabled(dssdev))
return 0;
if (ddata->data_lines)
in->ops.dpi->set_data_lines(in, ddata->data_lines);
in->ops.dpi->set_timings(in, &ddata->videomode);
r = in->ops.dpi->enable(in);
if (r)
return r;
gpiod_set_value_cansleep(ddata->enable_gpio, 1);
if (gpio_is_valid(ddata->backlight_gpio))
gpio_set_value_cansleep(ddata->backlight_gpio, 1);
dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
return 0;
}
static void panel_dpi_disable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *in = ddata->in;
if (!omapdss_device_is_enabled(dssdev))
return;
if (gpio_is_valid(ddata->backlight_gpio))
gpio_set_value_cansleep(ddata->backlight_gpio, 0);
gpiod_set_value_cansleep(ddata->enable_gpio, 0);
in->ops.dpi->disable(in);
dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
}
static void panel_dpi_set_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *in = ddata->in;
ddata->videomode = *timings;
dssdev->panel.timings = *timings;
in->ops.dpi->set_timings(in, timings);
}
static void panel_dpi_get_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
*timings = ddata->videomode;
}
static int panel_dpi_check_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *in = ddata->in;
return in->ops.dpi->check_timings(in, timings);
}
static struct omap_dss_driver panel_dpi_ops = {
.connect = panel_dpi_connect,
.disconnect = panel_dpi_disconnect,
.enable = panel_dpi_enable,
.disable = panel_dpi_disable,
.set_timings = panel_dpi_set_timings,
.get_timings = panel_dpi_get_timings,
.check_timings = panel_dpi_check_timings,
.get_resolution = omapdss_default_get_resolution,
};
static int panel_dpi_probe_pdata(struct platform_device *pdev)
{
const struct panel_dpi_platform_data *pdata;
struct panel_drv_data *ddata = platform_get_drvdata(pdev);
struct omap_dss_device *dssdev, *in;
struct videomode vm;
int r;
pdata = dev_get_platdata(&pdev->dev);
in = omap_dss_find_output(pdata->source);
if (in == NULL) {
dev_err(&pdev->dev, "failed to find video source '%s'\n",
pdata->source);
return -EPROBE_DEFER;
}
ddata->in = in;
ddata->data_lines = pdata->data_lines;
videomode_from_timing(pdata->display_timing, &vm);
videomode_to_omap_video_timings(&vm, &ddata->videomode);
dssdev = &ddata->dssdev;
dssdev->name = pdata->name;
r = devm_gpio_request_one(&pdev->dev, pdata->enable_gpio,
GPIOF_OUT_INIT_LOW, "panel enable");
if (r)
goto err_gpio;
ddata->enable_gpio = gpio_to_desc(pdata->enable_gpio);
ddata->backlight_gpio = pdata->backlight_gpio;
return 0;
err_gpio:
omap_dss_put_device(ddata->in);
return r;
}
static int panel_dpi_probe_of(struct platform_device *pdev)
{
struct panel_drv_data *ddata = platform_get_drvdata(pdev);
struct device_node *node = pdev->dev.of_node;
struct omap_dss_device *in;
int r;
struct display_timing timing;
struct videomode vm;
struct gpio_desc *gpio;
gpio = devm_gpiod_get_optional(&pdev->dev, "enable", GPIOD_OUT_LOW);
if (IS_ERR(gpio))
return PTR_ERR(gpio);
ddata->enable_gpio = gpio;
ddata->backlight_gpio = -ENOENT;
r = of_get_display_timing(node, "panel-timing", &timing);
if (r) {
dev_err(&pdev->dev, "failed to get video timing\n");
return r;
}
videomode_from_timing(&timing, &vm);
videomode_to_omap_video_timings(&vm, &ddata->videomode);
in = omapdss_of_find_source_for_first_ep(node);
if (IS_ERR(in)) {
dev_err(&pdev->dev, "failed to find video source\n");
return PTR_ERR(in);
}
ddata->in = in;
return 0;
}
static int panel_dpi_probe(struct platform_device *pdev)
{
struct panel_drv_data *ddata;
struct omap_dss_device *dssdev;
int r;
ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
if (ddata == NULL)
return -ENOMEM;
platform_set_drvdata(pdev, ddata);
if (dev_get_platdata(&pdev->dev)) {
r = panel_dpi_probe_pdata(pdev);
if (r)
return r;
} else if (pdev->dev.of_node) {
r = panel_dpi_probe_of(pdev);
if (r)
return r;
} else {
return -ENODEV;
}
if (gpio_is_valid(ddata->backlight_gpio)) {
r = devm_gpio_request_one(&pdev->dev, ddata->backlight_gpio,
GPIOF_OUT_INIT_LOW, "panel backlight");
if (r)
goto err_gpio;
}
dssdev = &ddata->dssdev;
dssdev->dev = &pdev->dev;
dssdev->driver = &panel_dpi_ops;
dssdev->type = OMAP_DISPLAY_TYPE_DPI;
dssdev->owner = THIS_MODULE;
dssdev->panel.timings = ddata->videomode;
dssdev->phy.dpi.data_lines = ddata->data_lines;
r = omapdss_register_display(dssdev);
if (r) {
dev_err(&pdev->dev, "Failed to register panel\n");
goto err_reg;
}
return 0;
err_reg:
err_gpio:
omap_dss_put_device(ddata->in);
return r;
}
static int __exit panel_dpi_remove(struct platform_device *pdev)
{
struct panel_drv_data *ddata = platform_get_drvdata(pdev);
struct omap_dss_device *dssdev = &ddata->dssdev;
struct omap_dss_device *in = ddata->in;
omapdss_unregister_display(dssdev);
panel_dpi_disable(dssdev);
panel_dpi_disconnect(dssdev);
omap_dss_put_device(in);
return 0;
}
static const struct of_device_id panel_dpi_of_match[] = {
{ .compatible = "omapdss,panel-dpi", },
{},
};
MODULE_DEVICE_TABLE(of, panel_dpi_of_match);
static struct platform_driver panel_dpi_driver = {
.probe = panel_dpi_probe,
.remove = __exit_p(panel_dpi_remove),
.driver = {
.name = "panel-dpi",
.of_match_table = panel_dpi_of_match,
.suppress_bind_attrs = true,
},
};
module_platform_driver(panel_dpi_driver);
MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
MODULE_DESCRIPTION("Generic MIPI DPI Panel Driver");
MODULE_LICENSE("GPL");
drivers/video/fbdev/omap2/omapfb/displays/panel-dsi-cm.c 0 → 100644
View file @ d43fb9f3
This diff is collapsed.
drivers/video/fbdev/omap2/omapfb/dss/Kconfig 0 → 100644
View file @ d43fb9f3
config FB_OMAP2_DSS_INIT
bool
config FB_OMAP2_DSS
tristate
select VIDEOMODE_HELPERS
select FB_OMAP2_DSS_INIT
select HDMI
config FB_OMAP2_DSS_DEBUG
bool "Debug support"
default n
help
This enables printing of debug messages. Alternatively, debug messages
can also be enabled by setting CONFIG_DYNAMIC_DEBUG and then setting
appropriate flags in <debugfs>/dynamic_debug/control.
config FB_OMAP2_DSS_DEBUGFS
bool "Debugfs filesystem support"
depends on DEBUG_FS
default n
help
This enables debugfs for OMAPDSS at <debugfs>/omapdss. This enables
querying about clock configuration and register configuration of dss,
dispc, dsi, hdmi and rfbi.
config FB_OMAP2_DSS_COLLECT_IRQ_STATS
bool "Collect DSS IRQ statistics"
depends on FB_OMAP2_DSS_DEBUGFS
default n
help
Collect DSS IRQ statistics, printable via debugfs.
The statistics can be found from
<debugfs>/omapdss/dispc_irq for DISPC interrupts, and
<debugfs>/omapdss/dsi_irq for DSI interrupts.
config FB_OMAP2_DSS_DPI
bool "DPI support"
default y
help
DPI Interface. This is the Parallel Display Interface.
config FB_OMAP2_DSS_RFBI
bool "RFBI support"
depends on BROKEN
default n
help
MIPI DBI support (RFBI, Remote Framebuffer Interface, in Texas
Instrument's terminology).
DBI is a bus between the host processor and a peripheral,
such as a display or a framebuffer chip.
See http://www.mipi.org/ for DBI specifications.
config FB_OMAP2_DSS_VENC
bool "VENC support"
default y
help
OMAP Video Encoder support for S-Video and composite TV-out.
config FB_OMAP2_DSS_HDMI_COMMON
bool
config FB_OMAP4_DSS_HDMI
bool "HDMI support for OMAP4"
default y
select FB_OMAP2_DSS_HDMI_COMMON
help
HDMI support for OMAP4 based SoCs.
config FB_OMAP5_DSS_HDMI
bool "HDMI support for OMAP5"
default n
select FB_OMAP2_DSS_HDMI_COMMON
help
HDMI Interface for OMAP5 and similar cores. This adds the High
Definition Multimedia Interface. See http://www.hdmi.org/ for HDMI
specification.
config FB_OMAP2_DSS_SDI
bool "SDI support"
default n
help
SDI (Serial Display Interface) support.
SDI is a high speed one-way display serial bus between the host
processor and a display.
config FB_OMAP2_DSS_DSI
bool "DSI support"
default n
help
MIPI DSI (Display Serial Interface) support.
DSI is a high speed half-duplex serial interface between the host
processor and a peripheral, such as a display or a framebuffer chip.
See http://www.mipi.org/ for DSI specifications.
config FB_OMAP2_DSS_MIN_FCK_PER_PCK
int "Minimum FCK/PCK ratio (for scaling)"
range 0 32
default 0
help
This can be used to adjust the minimum FCK/PCK ratio.
With this you can make sure that DISPC FCK is at least
n x PCK. Video plane scaling requires higher FCK than
normally.
If this is set to 0, there's no extra constraint on the
DISPC FCK. However, the FCK will at minimum be
2xPCK (if active matrix) or 3xPCK (if passive matrix).
Max FCK is 173MHz, so this doesn't work if your PCK
is very high.
config FB_OMAP2_DSS_SLEEP_AFTER_VENC_RESET
bool "Sleep 20ms after VENC reset"
default y
help
There is a 20ms sleep after VENC reset which seemed to fix the
reset. The reason for the bug is unclear, and it's also unclear
on what platforms this happens.
This option enables the sleep, and is enabled by default. You can
disable the sleep if it doesn't cause problems on your platform.
drivers/video/fbdev/omap2/omapfb/dss/Makefile 0 → 100644
View file @ d43fb9f3
obj-$(CONFIG_FB_OMAP2_DSS_INIT) += omapdss-boot-init.o
obj-$(CONFIG_FB_OMAP2_DSS) += omapdss.o
# Core DSS files
omapdss-y := core.o dss.o dss_features.o dispc.o dispc_coefs.o display.o \
output.o dss-of.o pll.o video-pll.o
# DSS compat layer files
omapdss-y += manager.o manager-sysfs.o overlay.o overlay-sysfs.o apply.o \
dispc-compat.o display-sysfs.o
omapdss-$(CONFIG_FB_OMAP2_DSS_DPI) += dpi.o
omapdss-$(CONFIG_FB_OMAP2_DSS_RFBI) += rfbi.o
omapdss-$(CONFIG_FB_OMAP2_DSS_VENC) += venc.o
omapdss-$(CONFIG_FB_OMAP2_DSS_SDI) += sdi.o
omapdss-$(CONFIG_FB_OMAP2_DSS_DSI) += dsi.o
omapdss-$(CONFIG_FB_OMAP2_DSS_HDMI_COMMON) += hdmi_common.o hdmi_wp.o hdmi_pll.o \
hdmi_phy.o
omapdss-$(CONFIG_FB_OMAP4_DSS_HDMI) += hdmi4.o hdmi4_core.o
omapdss-$(CONFIG_FB_OMAP5_DSS_HDMI) += hdmi5.o hdmi5_core.o
ccflags-$(CONFIG_FB_OMAP2_DSS_DEBUG) += -DDEBUG
drivers/video/fbdev/omap2/omapfb/dss/apply.c 0 → 100644
View file @ d43fb9f3
This diff is collapsed.
drivers/video/fbdev/omap2/omapfb/dss/core.c 0 → 100644
View file @ d43fb9f3
This diff is collapsed.
drivers/video/fbdev/omap2/omapfb/dss/dispc-compat.c 0 → 100644
View file @ d43fb9f3
This diff is collapsed.
drivers/video/fbdev/omap2/omapfb/dss/dispc-compat.h 0 → 100644
View file @ d43fb9f3
/*
* Copyright (C) 2012 Texas Instruments
* Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef __OMAP2_DSS_DISPC_COMPAT_H
#define __OMAP2_DSS_DISPC_COMPAT_H
void dispc_mgr_enable_sync(enum omap_channel channel);
void dispc_mgr_disable_sync(enum omap_channel channel);
int omap_dispc_wait_for_irq_interruptible_timeout(u32 irqmask,
unsigned long timeout);
int dss_dispc_initialize_irq(void);
void dss_dispc_uninitialize_irq(void);
#endif
drivers/video/fbdev/omap2/omapfb/dss/dispc.c 0 → 100644
View file @ d43fb9f3
This diff is collapsed.
drivers/video/fbdev/omap2/omapfb/dss/dispc.h 0 → 100644
View file @ d43fb9f3
This diff is collapsed.
drivers/video/fbdev/omap2/omapfb/dss/dispc_coefs.c 0 → 100644
View file @ d43fb9f3
This diff is collapsed.
drivers/video/fbdev/omap2/omapfb/dss/display-sysfs.c 0 → 100644
View file @ d43fb9f3
This diff is collapsed.
drivers/video/fbdev/omap2/omapfb/dss/display.c 0 → 100644
View file @ d43fb9f3
This diff is collapsed.
drivers/video/fbdev/omap2/omapfb/dss/dpi.c 0 → 100644
View file @ d43fb9f3
This diff is collapsed.
drivers/video/fbdev/omap2/omapfb/dss/dsi.c 0 → 100644
View file @ d43fb9f3
This diff is collapsed.
drivers/video/fbdev/omap2/omapfb/dss/dss-of.c 0 → 100644
View file @ d43fb9f3
This diff is collapsed.
drivers/video/fbdev/omap2/omapfb/dss/dss.c 0 → 100644
View file @ d43fb9f3
This diff is collapsed.
drivers/video/fbdev/omap2/omapfb/dss/dss.h 0 → 100644
View file @ d43fb9f3
This diff is collapsed.
drivers/video/fbdev/omap2/omapfb/dss/dss_features.c 0 → 100644
View file @ d43fb9f3
This diff is collapsed.
drivers/video/fbdev/omap2/omapfb/dss/dss_features.h 0 → 100644
View file @ d43fb9f3
This diff is collapsed.
drivers/video/fbdev/omap2/omapfb/dss/hdmi.h 0 → 100644
View file @ d43fb9f3
This diff is collapsed.
drivers/video/fbdev/omap2/omapfb/dss/hdmi4.c 0 → 100644
View file @ d43fb9f3
This diff is collapsed.
drivers/video/fbdev/omap2/omapfb/dss/hdmi4_core.c 0 → 100644
View file @ d43fb9f3
This diff is collapsed.
drivers/video/fbdev/omap2/omapfb/dss/hdmi4_core.h 0 → 100644
View file @ d43fb9f3
This diff is collapsed.
drivers/video/fbdev/omap2/omapfb/dss/hdmi5.c 0 → 100644
View file @ d43fb9f3
This diff is collapsed.
drivers/video/fbdev/omap2/omapfb/dss/hdmi5_core.c 0 → 100644
View file @ d43fb9f3
This diff is collapsed.
drivers/video/fbdev/omap2/omapfb/dss/hdmi5_core.h 0 → 100644
View file @ d43fb9f3
This diff is collapsed.
drivers/video/fbdev/omap2/omapfb/dss/hdmi_common.c 0 → 100644
View file @ d43fb9f3
This diff is collapsed.
drivers/video/fbdev/omap2/omapfb/dss/hdmi_phy.c 0 → 100644
View file @ d43fb9f3
This diff is collapsed.
drivers/video/fbdev/omap2/omapfb/dss/hdmi_pll.c 0 → 100644
View file @ d43fb9f3
This diff is collapsed.
drivers/video/fbdev/omap2/omapfb/dss/hdmi_wp.c 0 → 100644
View file @ d43fb9f3
This diff is collapsed.
drivers/video/fbdev/omap2/omapfb/dss/manager-sysfs.c 0 → 100644
View file @ d43fb9f3
This diff is collapsed.
drivers/video/fbdev/omap2/omapfb/dss/manager.c 0 → 100644
View file @ d43fb9f3
This diff is collapsed.
drivers/video/fbdev/omap2/omapfb/dss/omapdss-boot-init.c 0 → 100644
View file @ d43fb9f3
This diff is collapsed.
drivers/video/fbdev/omap2/omapfb/dss/output.c 0 → 100644
View file @ d43fb9f3
This diff is collapsed.
drivers/video/fbdev/omap2/omapfb/dss/overlay-sysfs.c 0 → 100644
View file @ d43fb9f3
This diff is collapsed.
drivers/video/fbdev/omap2/omapfb/dss/overlay.c 0 → 100644
View file @ d43fb9f3
This diff is collapsed.
drivers/video/fbdev/omap2/omapfb/dss/pll.c 0 → 100644
View file @ d43fb9f3
This diff is collapsed.
drivers/video/fbdev/omap2/omapfb/dss/rfbi.c 0 → 100644
View file @ d43fb9f3
This diff is collapsed.
drivers/video/fbdev/omap2/omapfb/dss/sdi.c 0 → 100644
View file @ d43fb9f3
This diff is collapsed.
drivers/video/fbdev/omap2/omapfb/dss/venc.c 0 → 100644
View file @ d43fb9f3
This diff is collapsed.
drivers/video/fbdev/omap2/omapfb/dss/video-pll.c 0 → 100644
View file @ d43fb9f3
This diff is collapsed.
drivers/video/fbdev/pxafb.c
View file @ d43fb9f3
This diff is collapsed.
drivers/video/fbdev/pxafb.h
View file @ d43fb9f3
This diff is collapsed.
drivers/video/fbdev/riva/fbdev.c
View file @ d43fb9f3
This diff is collapsed.
drivers/video/fbdev/sh_mobile_hdmi.c deleted 100644 → 0
View file @ 5807fcaa
This diff is collapsed.
drivers/video/fbdev/simplefb.c
View file @ d43fb9f3
This diff is collapsed.
drivers/video/fbdev/sm712fb.c
View file @ d43fb9f3
This diff is collapsed.
include/linux/fb.h
View file @ d43fb9f3
This diff is collapsed.
include/video/omapdss.h
View file @ d43fb9f3
This diff is collapsed.
include/video/sh_mobile_hdmi.h deleted 100644 → 0
View file @ 5807fcaa
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7