Commit d44d6e02 authored by Bich HEMON's avatar Bich HEMON Committed by Alexandre Torgue

ARM: dts: stm32: change CAN RAM mapping on stm32mp157c

Split the 10Kbytes CAN message RAM to be able to use simultaneously
FDCAN1 and FDCAN2 instances.
First 5Kbytes are allocated to FDCAN1 and last 5Kbytes are used for
FDCAN2. To do so, set the offset to 0x1400 in mram-cfg for FDCAN2.
Signed-off-by: default avatarBich Hemon <bich.hemon@st.com>
Signed-off-by: default avatarAlexandre Torgue <alexandre.torgue@st.com>
parent 5ae71cea
...@@ -742,14 +742,14 @@ dfsdm5: filter@5 { ...@@ -742,14 +742,14 @@ dfsdm5: filter@5 {
m_can1: can@4400e000 { m_can1: can@4400e000 {
compatible = "bosch,m_can"; compatible = "bosch,m_can";
reg = <0x4400e000 0x400>, <0x44011000 0x2800>; reg = <0x4400e000 0x400>, <0x44011000 0x1400>;
reg-names = "m_can", "message_ram"; reg-names = "m_can", "message_ram";
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "int0", "int1"; interrupt-names = "int0", "int1";
clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>; clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>;
clock-names = "hclk", "cclk"; clock-names = "hclk", "cclk";
bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>; bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>;
status = "disabled"; status = "disabled";
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment