Commit d4ec0cb0 authored by Simon Shields's avatar Simon Shields Committed by Krzysztof Kozlowski

ARM: dts: exynos: Add support for the touch-sensitive buttons on Midas family

Add support for the capacitive touch-sensitive buttons of the
following smartphones:
- Samsung Galaxy SIII (I9300)
- Samsung Galaxy SIII 4G (I9305)
- Samsung Galaxy Note II (N7100)
- Samsung Galaxy Note II 4G (N7105)

The keycodes correspond to markings on the phone case.
Signed-off-by: default avatarSimon Shields <simon@lineageos.org>
[GNUtoo@cyberdimension.org: Fixed keycodes, modified commit message]
Signed-off-by: default avatarDenis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
Signed-off-by: default avatarKrzysztof Kozlowski <krzk@kernel.org>
parent b6df5e2b
...@@ -168,3 +168,8 @@ &s5c73m3 { ...@@ -168,3 +168,8 @@ &s5c73m3 {
vdda-supply = <&ldo17_reg>; vdda-supply = <&ldo17_reg>;
status = "okay"; status = "okay";
}; };
&touchkey_reg {
gpio = <&gpm0 0 GPIO_ACTIVE_HIGH>;
status = "okay";
};
...@@ -13,6 +13,7 @@ ...@@ -13,6 +13,7 @@
#include "exynos4412.dtsi" #include "exynos4412.dtsi"
#include "exynos4412-ppmu-common.dtsi" #include "exynos4412-ppmu-common.dtsi"
#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/clock/maxim,max77686.h> #include <dt-bindings/clock/maxim,max77686.h>
#include <dt-bindings/pinctrl/samsung.h> #include <dt-bindings/pinctrl/samsung.h>
...@@ -92,6 +93,15 @@ vcc18mhl: voltage-regulator-5 { ...@@ -92,6 +93,15 @@ vcc18mhl: voltage-regulator-5 {
enable-active-high; enable-active-high;
}; };
touchkey_reg: voltage-regulator-6 {
compatible = "regulator-fixed";
regulator-name = "LED_VDD_3.3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
enable-active-high;
status = "disabled";
};
gpio-keys { gpio-keys {
compatible = "gpio-keys"; compatible = "gpio-keys";
pinctrl-names = "default"; pinctrl-names = "default";
...@@ -197,6 +207,25 @@ max77693-fuel-gauge@36 { ...@@ -197,6 +207,25 @@ max77693-fuel-gauge@36 {
}; };
}; };
i2c-gpio-4 {
compatible = "i2c-gpio";
sda-gpios = <&gpl0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
scl-gpios = <&gpl0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
i2c-gpio,delay-us = <2>;
#address-cells = <1>;
#size-cells = <0>;
touchkey@20 {
compatible = "cypress,midas-touchkey";
reg = <0x20>;
vdd-supply = <&touchkey_reg>;
vcc-supply = <&ldo5_reg>;
interrupt-parent = <&gpj0>;
interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
linux,keycodes = <KEY_BACK KEY_MENU>;
};
};
i2c-mhl { i2c-mhl {
compatible = "i2c-gpio"; compatible = "i2c-gpio";
gpios = <&gpf0 4 GPIO_ACTIVE_HIGH>, <&gpf0 6 GPIO_ACTIVE_HIGH>; gpios = <&gpf0 4 GPIO_ACTIVE_HIGH>, <&gpf0 6 GPIO_ACTIVE_HIGH>;
......
...@@ -73,3 +73,8 @@ &s5c73m3 { ...@@ -73,3 +73,8 @@ &s5c73m3 {
vdda-supply = <&cam_vdda_reg>; vdda-supply = <&cam_vdda_reg>;
status = "okay"; status = "okay";
}; };
&touchkey_reg {
gpio = <&gpm0 5 GPIO_ACTIVE_HIGH>;
status = "okay";
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment