Skip to content

L
linux
Commit d5103604 authored by Hauke Mehrtens's avatar Hauke Mehrtens Committed by Ralf Baechle
Browse files
Options

MIPS: lantiq: remove old GPHY loader code 

The GPHY loader was replaced by a new more flexible driver. Remove the
old driver.
Signed-off-by: default avatarHauke Mehrtens <hauke@hauke-m.de>
Cc: martin.blumenstingl@googlemail.com
Cc: john@phrozen.org
Cc: robh@kernel.org
Cc: andy.shevchenko@gmail.com
Cc: p.zabel@pengutronix.de
Cc: kishon@ti.com
Cc: mark.rutland@arm.com
Cc: linux-mips@linux-mips.org
Cc: linux-mtd@lists.infradead.org
Cc: linux-watchdog@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-spi@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17129/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent 12653414
Hide whitespace changes
Inline Side-by-side
Showing with 0 additions and 221 deletions
arch/mips/lantiq/xway/Makefile
View file @ d5103604
obj-y := prom.o sysctrl.o clk.o reset.o dma.o gptu.o dcdc.o
obj-y += vmmc.o
obj-$(CONFIG_XRX200_PHY_FW) += xrx200_phy_fw.o
arch/mips/lantiq/xway/reset.c
View file @ d5103604
......@@ -27,18 +27,6 @@
#define RCU_RST_REQ 0x0010
/* reset status register */
#define RCU_RST_STAT 0x0014
/* vr9 gphy registers */
#define RCU_GFS_ADD0_XRX200 0x0020
#define RCU_GFS_ADD1_XRX200 0x0068
/* xRX300 gphy registers */
#define RCU_GFS_ADD0_XRX300 0x0020
#define RCU_GFS_ADD1_XRX300 0x0058
#define RCU_GFS_ADD2_XRX300 0x00AC
/* xRX330 gphy registers */
#define RCU_GFS_ADD0_XRX330 0x0020
#define RCU_GFS_ADD1_XRX330 0x0058
#define RCU_GFS_ADD2_XRX330 0x00AC
#define RCU_GFS_ADD3_XRX330 0x0264
/* xbar BE flag */
#define RCU_AHB_ENDIAN 0x004C
......@@ -48,15 +36,6 @@
#define RCU_RD_GPHY0_XRX200 BIT(31)
#define RCU_RD_SRST BIT(30)
#define RCU_RD_GPHY1_XRX200 BIT(29)
/* xRX300 bits */
#define RCU_RD_GPHY0_XRX300 BIT(31)
#define RCU_RD_GPHY1_XRX300 BIT(29)
#define RCU_RD_GPHY2_XRX300 BIT(28)
/* xRX330 bits */
#define RCU_RD_GPHY0_XRX330 BIT(31)
#define RCU_RD_GPHY1_XRX330 BIT(29)
#define RCU_RD_GPHY2_XRX330 BIT(28)
#define RCU_RD_GPHY3_XRX330 BIT(10)
/* reset cause */
#define RCU_STAT_SHIFT 26
......@@ -98,7 +77,6 @@
/* remapped base addr of the reset control unit */
static void __iomem *ltq_rcu_membase;
static struct device_node *ltq_rcu_np;
static DEFINE_SPINLOCK(ltq_rcu_lock);
static void ltq_rcu_w32(uint32_t val, uint32_t reg_off)
{
......@@ -110,90 +88,6 @@ static uint32_t ltq_rcu_r32(uint32_t reg_off)
return ltq_r32(ltq_rcu_membase + reg_off);
}
static void ltq_rcu_w32_mask(uint32_t clr, uint32_t set, uint32_t reg_off)
{
unsigned long flags;
spin_lock_irqsave(&ltq_rcu_lock, flags);
ltq_rcu_w32((ltq_rcu_r32(reg_off) & ~(clr)) | (set), reg_off);
spin_unlock_irqrestore(&ltq_rcu_lock, flags);
}
struct ltq_gphy_reset {
u32 rd;
u32 addr;
};
/* reset / boot a gphy */
static struct ltq_gphy_reset xrx200_gphy[] = {
{RCU_RD_GPHY0_XRX200, RCU_GFS_ADD0_XRX200},
{RCU_RD_GPHY1_XRX200, RCU_GFS_ADD1_XRX200},
};
/* reset / boot a gphy */
static struct ltq_gphy_reset xrx300_gphy[] = {
{RCU_RD_GPHY0_XRX300, RCU_GFS_ADD0_XRX300},
{RCU_RD_GPHY1_XRX300, RCU_GFS_ADD1_XRX300},
{RCU_RD_GPHY2_XRX300, RCU_GFS_ADD2_XRX300},
};
/* reset / boot a gphy */
static struct ltq_gphy_reset xrx330_gphy[] = {
{RCU_RD_GPHY0_XRX330, RCU_GFS_ADD0_XRX330},
{RCU_RD_GPHY1_XRX330, RCU_GFS_ADD1_XRX330},
{RCU_RD_GPHY2_XRX330, RCU_GFS_ADD2_XRX330},
{RCU_RD_GPHY3_XRX330, RCU_GFS_ADD3_XRX330},
};
static void xrx200_gphy_boot_addr(struct ltq_gphy_reset *phy_regs,
dma_addr_t dev_addr)
{
ltq_rcu_w32_mask(0, phy_regs->rd, RCU_RST_REQ);
ltq_rcu_w32(dev_addr, phy_regs->addr);
ltq_rcu_w32_mask(phy_regs->rd, 0, RCU_RST_REQ);
}
/* reset and boot a gphy. these phys only exist on xrx200 SoC */
int xrx200_gphy_boot(struct device *dev, unsigned int id, dma_addr_t dev_addr)
{
struct clk *clk;
if (!of_device_is_compatible(ltq_rcu_np, "lantiq,rcu-xrx200")) {
dev_err(dev, "this SoC has no GPHY\n");
return -EINVAL;
}
if (of_machine_is_compatible("lantiq,vr9")) {
clk = clk_get_sys("1f203000.rcu", "gphy");
if (IS_ERR(clk))
return PTR_ERR(clk);
clk_enable(clk);
}
dev_info(dev, "booting GPHY%u firmware at %X\n", id, dev_addr);
if (of_machine_is_compatible("lantiq,vr9")) {
if (id >= ARRAY_SIZE(xrx200_gphy)) {
dev_err(dev, "%u is an invalid gphy id\n", id);
return -EINVAL;
}
xrx200_gphy_boot_addr(&xrx200_gphy[id], dev_addr);
} else if (of_machine_is_compatible("lantiq,ar10")) {
if (id >= ARRAY_SIZE(xrx300_gphy)) {
dev_err(dev, "%u is an invalid gphy id\n", id);
return -EINVAL;
}
xrx200_gphy_boot_addr(&xrx300_gphy[id], dev_addr);
} else if (of_machine_is_compatible("lantiq,grx390")) {
if (id >= ARRAY_SIZE(xrx330_gphy)) {
dev_err(dev, "%u is an invalid gphy id\n", id);
return -EINVAL;
}
xrx200_gphy_boot_addr(&xrx330_gphy[id], dev_addr);
}
return 0;
}
static void ltq_machine_restart(char *command)
{
u32 val = ltq_rcu_r32(RCU_RST_REQ);
......
arch/mips/lantiq/xway/xrx200_phy_fw.c deleted 100644 → 0
View file @ 12653414
/*
* Lantiq XRX200 PHY Firmware Loader
* Author: John Crispin
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*
* Copyright (C) 2012 John Crispin <john@phrozen.org>
*/
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/firmware.h>
#include <linux/of_platform.h>
#include <lantiq_soc.h>
#define XRX200_GPHY_FW_ALIGN (16 * 1024)
static dma_addr_t xway_gphy_load(struct platform_device *pdev)
{
const struct firmware *fw;
dma_addr_t dev_addr = 0;
const char *fw_name;
void *fw_addr;
size_t size;
if (of_get_property(pdev->dev.of_node, "firmware1", NULL) ||
of_get_property(pdev->dev.of_node, "firmware2", NULL)) {
switch (ltq_soc_type()) {
case SOC_TYPE_VR9:
if (of_property_read_string(pdev->dev.of_node,
"firmware1", &fw_name)) {
dev_err(&pdev->dev,
"failed to load firmware filename\n");
return 0;
}
break;
case SOC_TYPE_VR9_2:
if (of_property_read_string(pdev->dev.of_node,
"firmware2", &fw_name)) {
dev_err(&pdev->dev,
"failed to load firmware filename\n");
return 0;
}
break;
}
} else if (of_property_read_string(pdev->dev.of_node,
"firmware", &fw_name)) {
dev_err(&pdev->dev, "failed to load firmware filename\n");
return 0;
}
dev_info(&pdev->dev, "requesting %s\n", fw_name);
if (request_firmware(&fw, fw_name, &pdev->dev)) {
dev_err(&pdev->dev, "failed to load firmware: %s\n", fw_name);
return 0;
}
/*
* GPHY cores need the firmware code in a persistent and contiguous
* memory area with a 16 kB boundary aligned start address
*/
size = fw->size + XRX200_GPHY_FW_ALIGN;
fw_addr = dma_alloc_coherent(&pdev->dev, size, &dev_addr, GFP_KERNEL);
if (fw_addr) {
fw_addr = PTR_ALIGN(fw_addr, XRX200_GPHY_FW_ALIGN);
dev_addr = ALIGN(dev_addr, XRX200_GPHY_FW_ALIGN);
memcpy(fw_addr, fw->data, fw->size);
} else {
dev_err(&pdev->dev, "failed to alloc firmware memory\n");
}
release_firmware(fw);
return dev_addr;
}
static int xway_phy_fw_probe(struct platform_device *pdev)
{
dma_addr_t fw_addr;
struct property *pp;
unsigned char *phyids;
int i, ret = 0;
fw_addr = xway_gphy_load(pdev);
if (!fw_addr)
return -EINVAL;
pp = of_find_property(pdev->dev.of_node, "phys", NULL);
if (!pp)
return -ENOENT;
phyids = pp->value;
for (i = 0; i < pp->length && !ret; i++)
ret = xrx200_gphy_boot(&pdev->dev, phyids[i], fw_addr);
if (!ret)
mdelay(100);
return ret;
}
static const struct of_device_id xway_phy_match[] = {
{ .compatible = "lantiq,phy-xrx200" },
{},
};
static struct platform_driver xway_phy_driver = {
.probe = xway_phy_fw_probe,
.driver = {
.name = "phy-xrx200",
.of_match_table = xway_phy_match,
},
};
builtin_platform_driver(xway_phy_driver);
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7