Commit d526daeb authored by Javier Martinez Canillas's avatar Javier Martinez Canillas Committed by Tony Lindgren

ARM: dts: omap3-igep0020: Add pinmux setup for i2c devices

Add pin muxing support for IGEP boards i2c controllers.
Signed-off-by: default avatarJavier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent 9aa36dfd
...@@ -113,10 +113,33 @@ smsc911x_pins: pinmux_smsc911x_pins { ...@@ -113,10 +113,33 @@ smsc911x_pins: pinmux_smsc911x_pins {
>; >;
}; };
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,pins = <
0x18a (PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */
0x18c (PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */
>;
};
i2c2_pins: pinmux_i2c2_pins {
pinctrl-single,pins = <
0x18e (PIN_INPUT | MUX_MODE0) /* i2c2_scl.i2c2_scl */
0x190 (PIN_INPUT | MUX_MODE0) /* i2c2_sda.i2c2_sda */
>;
};
i2c3_pins: pinmux_i2c3_pins {
pinctrl-single,pins = <
0x192 (PIN_INPUT | MUX_MODE0) /* i2c3_scl.i2c3_scl */
0x194 (PIN_INPUT | MUX_MODE0) /* i2c3_sda.i2c3_sda */
>;
};
leds_pins: pinmux_leds_pins { }; leds_pins: pinmux_leds_pins { };
}; };
&i2c1 { &i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
clock-frequency = <2600000>; clock-frequency = <2600000>;
twl: twl@48 { twl: twl@48 {
...@@ -136,9 +159,16 @@ codec { ...@@ -136,9 +159,16 @@ codec {
#include "twl4030_omap3.dtsi" #include "twl4030_omap3.dtsi"
&i2c2 { &i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins>;
clock-frequency = <400000>; clock-frequency = <400000>;
}; };
&i2c3 {
pinctrl-names = "default";
pinctrl-0 = <&i2c3_pins>;
};
&mcbsp2 { &mcbsp2 {
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&mcbsp2_pins>; pinctrl-0 = <&mcbsp2_pins>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment