Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid

Pull HID fixes from Jiri Kosina:

 - Various functionality / regression fixes for Logitech devices from
   Hans de Goede

 - Fix for (recently added) GPIO support in mcp2221 driver from Lars
   Povlsen

 - Power management handling fix/quirk in i2c-hid driver for certain
   BIOSes that have strange aproach to power-cycle from Hans de Goede

 - a few device ID additions and device-specific quirks

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: logitech-dj: Fix Dinovo Mini when paired with a MX5x00 receiver
  HID: logitech-dj: Fix an error in mse_bluetooth_descriptor
  HID: Add Logitech Dinovo Edge battery quirk
  HID: logitech-hidpp: Add HIDPP_CONSUMER_VENDOR_KEYS quirk for the Dinovo Edge
  HID: logitech-dj: Handle quad/bluetooth keyboards with a builtin trackpad
  HID: add HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE for Gamevice devices
  HID: mcp2221: Fix GPIO output handling
  HID: hid-sensor-hub: Fix issue with devices with no report ID
  HID: i2c-hid: Put ACPI enumerated devices in D3 on shutdown
  HID: add support for Sega Saturn
  HID: cypress: Support Varmilo Keyboards' media hotkeys
  HID: ite: Replace ABS_MISC 120/121 events with touchpad on/off keypresses
  HID: logitech-hidpp: Add PID for MX Anywhere 2
  HID: uclogic: Add ID for Trust Flex Design Tablet

drivers/hid/hid-cypress.c

@@ -23,19 +23,17 @@
 #define CP_2WHEEL_MOUSE_HACK		0x02
 #define CP_2WHEEL_MOUSE_HACK_ON		0x04
 
+#define VA_INVAL_LOGICAL_BOUNDARY	0x08
+
 /*
  * Some USB barcode readers from cypress have usage min and usage max in
  * the wrong order
  */
-static __u8 *cp_report_fixup(struct hid_device *hdev, __u8 *rdesc,
+static __u8 *cp_rdesc_fixup(struct hid_device *hdev, __u8 *rdesc,
 		unsigned int *rsize)
 {
-	unsigned long quirks = (unsigned long)hid_get_drvdata(hdev);
 	unsigned int i;
 
-	if (!(quirks & CP_RDESC_SWAPPED_MIN_MAX))
-		return rdesc;
-
 	if (*rsize < 4)
 		return rdesc;
 
@@ -48,6 +46,40 @@ static __u8 *cp_report_fixup(struct hid_device *hdev, __u8 *rdesc,
 	return rdesc;
 }
 
+static __u8 *va_logical_boundary_fixup(struct hid_device *hdev, __u8 *rdesc,
+		unsigned int *rsize)
+{
+	/*
+	 * Varmilo VA104M (with VID Cypress and device ID 07B1) incorrectly
+	 * reports Logical Minimum of its Consumer Control device as 572
+	 * (0x02 0x3c). Fix this by setting its Logical Minimum to zero.
+	 */
+	if (*rsize == 25 &&
+			rdesc[0] == 0x05 && rdesc[1] == 0x0c &&
+			rdesc[2] == 0x09 && rdesc[3] == 0x01 &&
+			rdesc[6] == 0x19 && rdesc[7] == 0x00 &&
+			rdesc[11] == 0x16 && rdesc[12] == 0x3c && rdesc[13] == 0x02) {
+		hid_info(hdev,
+			 "fixing up varmilo VA104M consumer control report descriptor\n");
+		rdesc[12] = 0x00;
+		rdesc[13] = 0x00;
+	}
+	return rdesc;
+}
+
+static __u8 *cp_report_fixup(struct hid_device *hdev, __u8 *rdesc,
+		unsigned int *rsize)
+{
+	unsigned long quirks = (unsigned long)hid_get_drvdata(hdev);
+
+	if (quirks & CP_RDESC_SWAPPED_MIN_MAX)
+		rdesc = cp_rdesc_fixup(hdev, rdesc, rsize);
+	if (quirks & VA_INVAL_LOGICAL_BOUNDARY)
+		rdesc = va_logical_boundary_fixup(hdev, rdesc, rsize);
+
+	return rdesc;
+}
+
 static int cp_input_mapped(struct hid_device *hdev, struct hid_input *hi,
 		struct hid_field *field, struct hid_usage *usage,
 		unsigned long **bit, int *max)
@@ -128,6 +160,8 @@ static const struct hid_device_id cp_devices[] = {
 		.driver_data = CP_RDESC_SWAPPED_MIN_MAX },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_MOUSE),
 		.driver_data = CP_2WHEEL_MOUSE_HACK },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_VARMILO_VA104M_07B1),
+		.driver_data = VA_INVAL_LOGICAL_BOUNDARY },
 	{ }
 };
 MODULE_DEVICE_TABLE(hid, cp_devices);

drivers/hid/hid-ids.h

@@ -331,6 +331,8 @@
 #define USB_DEVICE_ID_CYPRESS_BARCODE_4	0xed81
 #define USB_DEVICE_ID_CYPRESS_TRUETOUCH	0xc001
 
+#define USB_DEVICE_ID_CYPRESS_VARMILO_VA104M_07B1   0X07b1
+
 #define USB_VENDOR_ID_DATA_MODUL	0x7374
 #define USB_VENDOR_ID_DATA_MODUL_EASYMAXTOUCH	0x1201
 
@@ -443,6 +445,10 @@
 #define USB_VENDOR_ID_FRUCTEL	0x25B6
 #define USB_DEVICE_ID_GAMETEL_MT_MODE	0x0002
 
+#define USB_VENDOR_ID_GAMEVICE	0x27F8
+#define USB_DEVICE_ID_GAMEVICE_GV186	0x0BBE
+#define USB_DEVICE_ID_GAMEVICE_KISHI	0x0BBF
+
 #define USB_VENDOR_ID_GAMERON		0x0810
 #define USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR	0x0001
 #define USB_DEVICE_ID_GAMERON_DUAL_PCS_ADAPTOR	0x0002
@@ -485,6 +491,7 @@
 #define USB_DEVICE_ID_PENPOWER		0x00f4
 
 #define USB_VENDOR_ID_GREENASIA		0x0e8f
+#define USB_DEVICE_ID_GREENASIA_DUAL_SAT_ADAPTOR 0x3010
 #define USB_DEVICE_ID_GREENASIA_DUAL_USB_JOYPAD	0x3013
 
 #define USB_VENDOR_ID_GRETAGMACBETH	0x0971
@@ -743,6 +750,7 @@
 #define USB_VENDOR_ID_LOGITECH		0x046d
 #define USB_DEVICE_ID_LOGITECH_AUDIOHUB 0x0a0e
 #define USB_DEVICE_ID_LOGITECH_T651	0xb00c
+#define USB_DEVICE_ID_LOGITECH_DINOVO_EDGE_KBD	0xb309
 #define USB_DEVICE_ID_LOGITECH_C007	0xc007
 #define USB_DEVICE_ID_LOGITECH_C077	0xc077
 #define USB_DEVICE_ID_LOGITECH_RECEIVER	0xc101
@@ -1298,6 +1306,7 @@
 
 #define USB_VENDOR_ID_UGTIZER			0x2179
 #define USB_DEVICE_ID_UGTIZER_TABLET_GP0610	0x0053
+#define USB_DEVICE_ID_UGTIZER_TABLET_GT5040	0x0077
 
 #define USB_VENDOR_ID_VIEWSONIC			0x0543
 #define USB_DEVICE_ID_VIEWSONIC_PD1011		0xe621

drivers/hid/hid-input.c

@@ -319,6 +319,9 @@ static const struct hid_device_id hid_battery_quirks[] = {
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_ASUSTEK,
 		USB_DEVICE_ID_ASUSTEK_T100CHI_KEYBOARD),
 	  HID_BATTERY_QUIRK_IGNORE },
+	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH,
+		USB_DEVICE_ID_LOGITECH_DINOVO_EDGE_KBD),
+	  HID_BATTERY_QUIRK_IGNORE },
 	{}
 };
 

drivers/hid/hid-ite.c

@@ -11,6 +11,48 @@
 
 #include "hid-ids.h"
 
+#define QUIRK_TOUCHPAD_ON_OFF_REPORT		BIT(0)
+
+static __u8 *ite_report_fixup(struct hid_device *hdev, __u8 *rdesc, unsigned int *rsize)
+{
+	unsigned long quirks = (unsigned long)hid_get_drvdata(hdev);
+
+	if (quirks & QUIRK_TOUCHPAD_ON_OFF_REPORT) {
+		if (*rsize == 188 && rdesc[162] == 0x81 && rdesc[163] == 0x02) {
+			hid_info(hdev, "Fixing up ITE keyboard report descriptor\n");
+			rdesc[163] = HID_MAIN_ITEM_RELATIVE;
+		}
+	}
+
+	return rdesc;
+}
+
+static int ite_input_mapping(struct hid_device *hdev,
+		struct hid_input *hi, struct hid_field *field,
+		struct hid_usage *usage, unsigned long **bit,
+		int *max)
+{
+
+	unsigned long quirks = (unsigned long)hid_get_drvdata(hdev);
+
+	if ((quirks & QUIRK_TOUCHPAD_ON_OFF_REPORT) &&
+	    (usage->hid & HID_USAGE_PAGE) == 0x00880000) {
+		if (usage->hid == 0x00880078) {
+			/* Touchpad on, userspace expects F22 for this */
+			hid_map_usage_clear(hi, usage, bit, max, EV_KEY, KEY_F22);
+			return 1;
+		}
+		if (usage->hid == 0x00880079) {
+			/* Touchpad off, userspace expects F23 for this */
+			hid_map_usage_clear(hi, usage, bit, max, EV_KEY, KEY_F23);
+			return 1;
+		}
+		return -1;
+	}
+
+	return 0;
+}
+
 static int ite_event(struct hid_device *hdev, struct hid_field *field,
 		     struct hid_usage *usage, __s32 value)
 {
@@ -37,13 +79,27 @@ static int ite_event(struct hid_device *hdev, struct hid_field *field,
 	return 0;
 }
 
+static int ite_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+	int ret;
+
+	hid_set_drvdata(hdev, (void *)id->driver_data);
+
+	ret = hid_open_report(hdev);
+	if (ret)
+		return ret;
+
+	return hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+}
+
 static const struct hid_device_id ite_devices[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ITE, USB_DEVICE_ID_ITE8595) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_258A, USB_DEVICE_ID_258A_6A88) },
 	/* ITE8595 USB kbd ctlr, with Synaptics touchpad connected to it. */
 	{ HID_DEVICE(BUS_USB, HID_GROUP_GENERIC,
 		     USB_VENDOR_ID_SYNAPTICS,
-		     USB_DEVICE_ID_SYNAPTICS_ACER_SWITCH5_012) },
+		     USB_DEVICE_ID_SYNAPTICS_ACER_SWITCH5_012),
+	  .driver_data = QUIRK_TOUCHPAD_ON_OFF_REPORT },
 	/* ITE8910 USB kbd ctlr, with Synaptics touchpad connected to it. */
 	{ HID_DEVICE(BUS_USB, HID_GROUP_GENERIC,
 		     USB_VENDOR_ID_SYNAPTICS,
@@ -55,6 +111,9 @@ MODULE_DEVICE_TABLE(hid, ite_devices);
 static struct hid_driver ite_driver = {
 	.name = "itetech",
 	.id_table = ite_devices,
+	.probe = ite_probe,
+	.report_fixup = ite_report_fixup,
+	.input_mapping = ite_input_mapping,
 	.event = ite_event,
 };
 module_hid_driver(ite_driver);

drivers/hid/hid-logitech-dj.c

@@ -328,7 +328,7 @@ static const char mse_bluetooth_descriptor[] = {
 	0x25, 0x01,		/*      LOGICAL_MAX (1)                 */
 	0x75, 0x01,		/*      REPORT_SIZE (1)                 */
 	0x95, 0x04,		/*      REPORT_COUNT (4)                */
-	0x81, 0x06,		/*      INPUT                           */
+	0x81, 0x02,		/*      INPUT (Data,Var,Abs)            */
 	0xC0,			/*    END_COLLECTION                    */
 	0xC0,			/*  END_COLLECTION                      */
 };
@@ -866,11 +866,24 @@ static void logi_dj_recv_queue_notification(struct dj_receiver_dev *djrcv_dev,
 	schedule_work(&djrcv_dev->work);
 }
 
+/*
+ * Some quad/bluetooth keyboards have a builtin touchpad in this case we see
+ * only 1 paired device with a device_type of REPORT_TYPE_KEYBOARD. For the
+ * touchpad to work we must also forward mouse input reports to the dj_hiddev
+ * created for the keyboard (instead of forwarding them to a second paired
+ * device with a device_type of REPORT_TYPE_MOUSE as we normally would).
+ */
+static const u16 kbd_builtin_touchpad_ids[] = {
+	0xb309, /* Dinovo Edge */
+	0xb30c, /* Dinovo Mini */
+};
+
 static void logi_hidpp_dev_conn_notif_equad(struct hid_device *hdev,
 					    struct hidpp_event *hidpp_report,
 					    struct dj_workitem *workitem)
 {
 	struct dj_receiver_dev *djrcv_dev = hid_get_drvdata(hdev);
+	int i, id;
 
 	workitem->type = WORKITEM_TYPE_PAIRED;
 	workitem->device_type = hidpp_report->params[HIDPP_PARAM_DEVICE_INFO] &
@@ -882,6 +895,13 @@ static void logi_hidpp_dev_conn_notif_equad(struct hid_device *hdev,
 		workitem->reports_supported |= STD_KEYBOARD | MULTIMEDIA |
 					       POWER_KEYS | MEDIA_CENTER |
 					       HIDPP;
+		id = (workitem->quad_id_msb << 8) | workitem->quad_id_lsb;
+		for (i = 0; i < ARRAY_SIZE(kbd_builtin_touchpad_ids); i++) {
+			if (id == kbd_builtin_touchpad_ids[i]) {
+				workitem->reports_supported |= STD_MOUSE;
+				break;
+			}
+		}
 		break;
 	case REPORT_TYPE_MOUSE:
 		workitem->reports_supported |= STD_MOUSE | HIDPP;

drivers/hid/hid-logitech-hidpp.c

@@ -93,6 +93,8 @@ MODULE_PARM_DESC(disable_tap_to_click,
 #define HIDPP_CAPABILITY_BATTERY_LEVEL_STATUS	BIT(3)
 #define HIDPP_CAPABILITY_BATTERY_VOLTAGE	BIT(4)
 
+#define lg_map_key_clear(c)  hid_map_usage_clear(hi, usage, bit, max, EV_KEY, (c))
+
 /*
  * There are two hidpp protocols in use, the first version hidpp10 is known
  * as register access protocol or RAP, the second version hidpp20 is known as
@@ -2950,6 +2952,26 @@ static int g920_get_config(struct hidpp_device *hidpp,
 	return g920_ff_set_autocenter(hidpp, data);
 }
 
+/* -------------------------------------------------------------------------- */
+/* Logitech Dinovo Mini keyboard with builtin touchpad                        */
+/* -------------------------------------------------------------------------- */
+#define DINOVO_MINI_PRODUCT_ID		0xb30c
+
+static int lg_dinovo_input_mapping(struct hid_device *hdev, struct hid_input *hi,
+		struct hid_field *field, struct hid_usage *usage,
+		unsigned long **bit, int *max)
+{
+	if ((usage->hid & HID_USAGE_PAGE) != HID_UP_LOGIVENDOR)
+		return 0;
+
+	switch (usage->hid & HID_USAGE) {
+	case 0x00d: lg_map_key_clear(KEY_MEDIA);	break;
+	default:
+		return 0;
+	}
+	return 1;
+}
+
 /* -------------------------------------------------------------------------- */
 /* HID++1.0 devices which use HID++ reports for their wheels                  */
 /* -------------------------------------------------------------------------- */
@@ -3185,6 +3207,9 @@ static int hidpp_input_mapping(struct hid_device *hdev, struct hid_input *hi,
 			field->application != HID_GD_MOUSE)
 		return m560_input_mapping(hdev, hi, field, usage, bit, max);
 
+	if (hdev->product == DINOVO_MINI_PRODUCT_ID)
+		return lg_dinovo_input_mapping(hdev, hi, field, usage, bit, max);
+
 	return 0;
 }
 
@@ -3947,6 +3972,7 @@ static const struct hid_device_id hidpp_devices[] = {
 	  LDJ_DEVICE(0x405e), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_X2121 },
 	{ /* Mouse Logitech MX Anywhere 2 */
 	  LDJ_DEVICE(0x404a), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_X2121 },
+	{ LDJ_DEVICE(0x4072), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_X2121 },
 	{ LDJ_DEVICE(0xb013), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_X2121 },
 	{ LDJ_DEVICE(0xb018), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_X2121 },
 	{ LDJ_DEVICE(0xb01f), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_X2121 },
@@ -3971,6 +3997,9 @@ static const struct hid_device_id hidpp_devices[] = {
 	{ /* Keyboard MX5000 (Bluetooth-receiver in HID proxy mode) */
 	  LDJ_DEVICE(0xb305),
 	  .driver_data = HIDPP_QUIRK_HIDPP_CONSUMER_VENDOR_KEYS },
+	{ /* Dinovo Edge (Bluetooth-receiver in HID proxy mode) */
+	  LDJ_DEVICE(0xb309),
+	  .driver_data = HIDPP_QUIRK_HIDPP_CONSUMER_VENDOR_KEYS },
 	{ /* Keyboard MX5500 (Bluetooth-receiver in HID proxy mode) */
 	  LDJ_DEVICE(0xb30b),
 	  .driver_data = HIDPP_QUIRK_HIDPP_CONSUMER_VENDOR_KEYS },
@@ -4013,6 +4042,9 @@ static const struct hid_device_id hidpp_devices[] = {
 	{ /* MX5000 keyboard over Bluetooth */
 	  HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, 0xb305),
 	  .driver_data = HIDPP_QUIRK_HIDPP_CONSUMER_VENDOR_KEYS },
+	{ /* Dinovo Edge keyboard over Bluetooth */
+	  HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, 0xb309),
+	  .driver_data = HIDPP_QUIRK_HIDPP_CONSUMER_VENDOR_KEYS },
 	{ /* MX5500 keyboard over Bluetooth */
 	  HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, 0xb30b),
 	  .driver_data = HIDPP_QUIRK_HIDPP_CONSUMER_VENDOR_KEYS },

drivers/hid/hid-mcp2221.c

@@ -49,6 +49,36 @@ enum {
 	MCP2221_ALT_F_NOT_GPIOD = 0xEF,
 };
 
+/* MCP GPIO direction encoding */
+enum {
+	MCP2221_DIR_OUT = 0x00,
+	MCP2221_DIR_IN = 0x01,
+};
+
+#define MCP_NGPIO	4
+
+/* MCP GPIO set command layout */
+struct mcp_set_gpio {
+	u8 cmd;
+	u8 dummy;
+	struct {
+		u8 change_value;
+		u8 value;
+		u8 change_direction;
+		u8 direction;
+	} gpio[MCP_NGPIO];
+} __packed;
+
+/* MCP GPIO get command layout */
+struct mcp_get_gpio {
+	u8 cmd;
+	u8 dummy;
+	struct {
+		u8 direction;
+		u8 value;
+	} gpio[MCP_NGPIO];
+} __packed;
+
 /*
  * There is no way to distinguish responses. Therefore next command
  * is sent only after response to previous has been received. Mutex
@@ -542,7 +572,7 @@ static int mcp_gpio_get(struct gpio_chip *gc,
 
 	mcp->txbuf[0] = MCP2221_GPIO_GET;
 
-	mcp->gp_idx = (offset + 1) * 2;
+	mcp->gp_idx = offsetof(struct mcp_get_gpio, gpio[offset].value);
 
 	mutex_lock(&mcp->lock);
 	ret = mcp_send_data_req_status(mcp, mcp->txbuf, 1);
@@ -559,7 +589,7 @@ static void mcp_gpio_set(struct gpio_chip *gc,
 	memset(mcp->txbuf, 0, 18);
 	mcp->txbuf[0] = MCP2221_GPIO_SET;
 
-	mcp->gp_idx = ((offset + 1) * 4) - 1;
+	mcp->gp_idx = offsetof(struct mcp_set_gpio, gpio[offset].value);
 
 	mcp->txbuf[mcp->gp_idx - 1] = 1;
 	mcp->txbuf[mcp->gp_idx] = !!value;
@@ -575,7 +605,7 @@ static int mcp_gpio_dir_set(struct mcp2221 *mcp,
 	memset(mcp->txbuf, 0, 18);
 	mcp->txbuf[0] = MCP2221_GPIO_SET;
 
-	mcp->gp_idx = (offset + 1) * 5;
+	mcp->gp_idx = offsetof(struct mcp_set_gpio, gpio[offset].direction);
 
 	mcp->txbuf[mcp->gp_idx - 1] = 1;
 	mcp->txbuf[mcp->gp_idx] = val;
@@ -590,7 +620,7 @@ static int mcp_gpio_direction_input(struct gpio_chip *gc,
 	struct mcp2221 *mcp = gpiochip_get_data(gc);
 
 	mutex_lock(&mcp->lock);
-	ret = mcp_gpio_dir_set(mcp, offset, 0);
+	ret = mcp_gpio_dir_set(mcp, offset, MCP2221_DIR_IN);
 	mutex_unlock(&mcp->lock);
 
 	return ret;
@@ -603,7 +633,7 @@ static int mcp_gpio_direction_output(struct gpio_chip *gc,
 	struct mcp2221 *mcp = gpiochip_get_data(gc);
 
 	mutex_lock(&mcp->lock);
-	ret = mcp_gpio_dir_set(mcp, offset, 1);
+	ret = mcp_gpio_dir_set(mcp, offset, MCP2221_DIR_OUT);
 	mutex_unlock(&mcp->lock);
 
 	/* Can't configure as output, bailout early */
@@ -623,7 +653,7 @@ static int mcp_gpio_get_direction(struct gpio_chip *gc,
 
 	mcp->txbuf[0] = MCP2221_GPIO_GET;
 
-	mcp->gp_idx = (offset + 1) * 2;
+	mcp->gp_idx = offsetof(struct mcp_get_gpio, gpio[offset].direction);
 
 	mutex_lock(&mcp->lock);
 	ret = mcp_send_data_req_status(mcp, mcp->txbuf, 1);
@@ -632,7 +662,7 @@ static int mcp_gpio_get_direction(struct gpio_chip *gc,
 	if (ret)
 		return ret;
 
-	if (mcp->gpio_dir)
+	if (mcp->gpio_dir == MCP2221_DIR_IN)
 		return GPIO_LINE_DIRECTION_IN;
 
 	return GPIO_LINE_DIRECTION_OUT;
@@ -758,7 +788,7 @@ static int mcp2221_raw_event(struct hid_device *hdev,
 				mcp->status = -ENOENT;
 			} else {
 				mcp->status = !!data[mcp->gp_idx];
-				mcp->gpio_dir = !!data[mcp->gp_idx + 1];
+				mcp->gpio_dir = data[mcp->gp_idx + 1];
 			}
 			break;
 		default:
@@ -860,7 +890,7 @@ static int mcp2221_probe(struct hid_device *hdev,
 	mcp->gc->get_direction = mcp_gpio_get_direction;
 	mcp->gc->set = mcp_gpio_set;
 	mcp->gc->get = mcp_gpio_get;
-	mcp->gc->ngpio = 4;
+	mcp->gc->ngpio = MCP_NGPIO;
 	mcp->gc->base = -1;
 	mcp->gc->can_sleep = 1;
 	mcp->gc->parent = &hdev->dev;

drivers/hid/hid-quirks.c

@@ -83,7 +83,12 @@ static const struct hid_device_id hid_quirks[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_FORMOSA, USB_DEVICE_ID_FORMOSA_IR_RECEIVER), HID_QUIRK_NO_INIT_REPORTS },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_FREESCALE, USB_DEVICE_ID_FREESCALE_MX28), HID_QUIRK_NOGET },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_FUTABA, USB_DEVICE_ID_LED_DISPLAY), HID_QUIRK_NO_INIT_REPORTS },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_GREENASIA, USB_DEVICE_ID_GREENASIA_DUAL_SAT_ADAPTOR), HID_QUIRK_MULTI_INPUT },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_GREENASIA, USB_DEVICE_ID_GREENASIA_DUAL_USB_JOYPAD), HID_QUIRK_MULTI_INPUT },
+	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_GAMEVICE, USB_DEVICE_ID_GAMEVICE_GV186),
+		HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_GAMEVICE, USB_DEVICE_ID_GAMEVICE_KISHI),
+		HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_DRIVING), HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_FIGHTING), HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_FLYING), HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT },

drivers/hid/hid-sensor-hub.c

@@ -483,7 +483,8 @@ static int sensor_hub_raw_event(struct hid_device *hdev,
 		return 1;
 
 	ptr = raw_data;
-	ptr++; /* Skip report id */
+	if (report->id)
+		ptr++; /* Skip report id */
 
 	spin_lock_irqsave(&pdata->lock, flags);
 

drivers/hid/hid-uclogic-core.c

@@ -385,6 +385,8 @@ static const struct hid_device_id uclogic_devices[] = {
 				USB_DEVICE_ID_UCLOGIC_DRAWIMAGE_G3) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_UGTIZER,
 				USB_DEVICE_ID_UGTIZER_TABLET_GP0610) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_UGTIZER,
+				USB_DEVICE_ID_UGTIZER_TABLET_GT5040) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_UGEE,
 				USB_DEVICE_ID_UGEE_TABLET_G5) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_UGEE,

drivers/hid/hid-uclogic-params.c

@@ -997,6 +997,8 @@ int uclogic_params_init(struct uclogic_params *params,
 		break;
 	case VID_PID(USB_VENDOR_ID_UGTIZER,
 		     USB_DEVICE_ID_UGTIZER_TABLET_GP0610):
+	case VID_PID(USB_VENDOR_ID_UGTIZER,
+		     USB_DEVICE_ID_UGTIZER_TABLET_GT5040):
 	case VID_PID(USB_VENDOR_ID_UGEE,
 		     USB_DEVICE_ID_UGEE_XPPEN_TABLET_G540):
 	case VID_PID(USB_VENDOR_ID_UGEE,

drivers/hid/i2c-hid/i2c-hid-core.c

@@ -943,6 +943,11 @@ static void i2c_hid_acpi_enable_wakeup(struct device *dev)
 	}
 }
 
+static void i2c_hid_acpi_shutdown(struct device *dev)
+{
+	acpi_device_set_power(ACPI_COMPANION(dev), ACPI_STATE_D3_COLD);
+}
+
 static const struct acpi_device_id i2c_hid_acpi_match[] = {
 	{"ACPI0C50", 0 },
 	{"PNP0C50", 0 },
@@ -959,6 +964,8 @@ static inline int i2c_hid_acpi_pdata(struct i2c_client *client,
 static inline void i2c_hid_acpi_fix_up_power(struct device *dev) {}
 
 static inline void i2c_hid_acpi_enable_wakeup(struct device *dev) {}
+
+static inline void i2c_hid_acpi_shutdown(struct device *dev) {}
 #endif
 
 #ifdef CONFIG_OF
@@ -1175,6 +1182,8 @@ static void i2c_hid_shutdown(struct i2c_client *client)
 
 	i2c_hid_set_power(client, I2C_HID_PWR_SLEEP);
 	free_irq(client->irq, ihid);
+
+	i2c_hid_acpi_shutdown(&client->dev);
 }
 
 #ifdef CONFIG_PM_SLEEP