mlxsw: core: Remove critical trip points from thermal zones

Disable software thermal protection by removing critical trip points
from all thermal zones.

The software thermal protection is redundant given there are two layers
of protection below it in firmware and hardware. The first layer is
performed by firmware, the second, in case firmware was not able to
perform protection, by hardware.
The temperature threshold set for hardware protection is always higher
than for firmware.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/mellanox/mlxsw/core_thermal.c

@@ -19,7 +19,6 @@
 #define MLXSW_THERMAL_ASIC_TEMP_NORM	75000	/* 75C */
 #define MLXSW_THERMAL_ASIC_TEMP_HIGH	85000	/* 85C */
 #define MLXSW_THERMAL_ASIC_TEMP_HOT	105000	/* 105C */
-#define MLXSW_THERMAL_ASIC_TEMP_CRIT	140000	/* 140C */
 #define MLXSW_THERMAL_HYSTERESIS_TEMP	5000	/* 5C */
 #define MLXSW_THERMAL_MODULE_TEMP_SHIFT	(MLXSW_THERMAL_HYSTERESIS_TEMP * 2)
 #define MLXSW_THERMAL_ZONE_MAX_NAME	16
@@ -45,7 +44,6 @@ enum mlxsw_thermal_trips {
 	MLXSW_THERMAL_TEMP_TRIP_NORM,
 	MLXSW_THERMAL_TEMP_TRIP_HIGH,
 	MLXSW_THERMAL_TEMP_TRIP_HOT,
-	MLXSW_THERMAL_TEMP_TRIP_CRIT,
 };
 
 struct mlxsw_thermal_trip {
@@ -75,16 +73,9 @@ static const struct mlxsw_thermal_trip default_thermal_trips[] = {
 	{	/* Warning */
 		.type		= THERMAL_TRIP_HOT,
 		.temp		= MLXSW_THERMAL_ASIC_TEMP_HOT,
-		.hyst		= MLXSW_THERMAL_HYSTERESIS_TEMP,
 		.min_state	= MLXSW_THERMAL_MAX_STATE,
 		.max_state	= MLXSW_THERMAL_MAX_STATE,
 	},
-	{	/* Critical - soft poweroff */
-		.type		= THERMAL_TRIP_CRITICAL,
-		.temp		= MLXSW_THERMAL_ASIC_TEMP_CRIT,
-		.min_state	= MLXSW_THERMAL_MAX_STATE,
-		.max_state	= MLXSW_THERMAL_MAX_STATE,
-	}
 };
 
 #define MLXSW_THERMAL_NUM_TRIPS	ARRAY_SIZE(default_thermal_trips)
@@ -154,7 +145,6 @@ mlxsw_thermal_module_trips_reset(struct mlxsw_thermal_module *tz)
 	tz->trips[MLXSW_THERMAL_TEMP_TRIP_NORM].temp = 0;
 	tz->trips[MLXSW_THERMAL_TEMP_TRIP_HIGH].temp = 0;
 	tz->trips[MLXSW_THERMAL_TEMP_TRIP_HOT].temp = 0;
-	tz->trips[MLXSW_THERMAL_TEMP_TRIP_CRIT].temp = 0;
 }
 
 static int
@@ -183,11 +173,10 @@ mlxsw_thermal_module_trips_update(struct device *dev, struct mlxsw_core *core,
 	}
 
 	/* According to the system thermal requirements, the thermal zones are
-	 * defined with four trip points. The critical and emergency
+	 * defined with three trip points. The critical and emergency
 	 * temperature thresholds, provided by QSFP module are set as "active"
-	 * and "hot" trip points, "normal" and "critical" trip points are
-	 * derived from "active" and "hot" by subtracting or adding double
-	 * hysteresis value.
+	 * and "hot" trip points, "normal" trip point is derived from "active"
+	 * by subtracting double hysteresis value.
 	 */
 	if (crit_temp >= MLXSW_THERMAL_MODULE_TEMP_SHIFT)
 		tz->trips[MLXSW_THERMAL_TEMP_TRIP_NORM].temp = crit_temp -
@@ -196,8 +185,6 @@ mlxsw_thermal_module_trips_update(struct device *dev, struct mlxsw_core *core,
 		tz->trips[MLXSW_THERMAL_TEMP_TRIP_NORM].temp = crit_temp;
 	tz->trips[MLXSW_THERMAL_TEMP_TRIP_HIGH].temp = crit_temp;
 	tz->trips[MLXSW_THERMAL_TEMP_TRIP_HOT].temp = emerg_temp;
-	tz->trips[MLXSW_THERMAL_TEMP_TRIP_CRIT].temp = emerg_temp +
-					MLXSW_THERMAL_MODULE_TEMP_SHIFT;
 
 	return 0;
 }
@@ -210,7 +197,7 @@ static void mlxsw_thermal_tz_score_update(struct mlxsw_thermal *thermal,
 	struct mlxsw_thermal_trip *trip = trips;
 	unsigned int score, delta, i, shift = 1;
 
-	/* Calculate thermal zone score, if temperature is above the critical
+	/* Calculate thermal zone score, if temperature is above the hot
 	 * threshold score is set to MLXSW_THERMAL_TEMP_SCORE_MAX.
 	 */
 	score = MLXSW_THERMAL_TEMP_SCORE_MAX;
@@ -333,8 +320,7 @@ static int mlxsw_thermal_set_trip_temp(struct thermal_zone_device *tzdev,
 {
 	struct mlxsw_thermal *thermal = tzdev->devdata;
 
-	if (trip < 0 || trip >= MLXSW_THERMAL_NUM_TRIPS ||
-	    temp > MLXSW_THERMAL_ASIC_TEMP_CRIT)
+	if (trip < 0 || trip >= MLXSW_THERMAL_NUM_TRIPS)
 		return -EINVAL;
 
 	thermal->trips[trip].temp = temp;
@@ -502,8 +488,7 @@ mlxsw_thermal_module_trip_temp_set(struct thermal_zone_device *tzdev,
 {
 	struct mlxsw_thermal_module *tz = tzdev->devdata;
 
-	if (trip < 0 || trip >= MLXSW_THERMAL_NUM_TRIPS ||
-	    temp > tz->trips[MLXSW_THERMAL_TEMP_TRIP_CRIT].temp)
+	if (trip < 0 || trip >= MLXSW_THERMAL_NUM_TRIPS)
 		return -EINVAL;
 
 	tz->trips[trip].temp = temp;